Can the durability of one-step self-etch adhesives be improved by double application or by an extra layer of hydrophobic resin?

Journal of Dentistry

Volumn 36, Issue 5, 2008, Pages 309-315

  Reis, Alessandra ^a   Albuquerque, Maurício ^b   Pegoraro, Mariana ^b   Mattei, Gracielle ^b   Bauer, José Roberto de Oliveira ^c   Grande, Rosa Helena Miranda ^d   Klein Junior, Celso Afonso ^e   Baumhardt Neto, Ricardo ^f   Loguercio, Alessandro D ^a  

^a STATE UNIVERSITY OF PONTA GROSSA   (Brazil)

^b UNIVERSIDADE DO OESTE DE SANTA CATARINA   (Brazil)

^c UNIVERSIDADE NOVE DE JULHO   (Brazil)

^d UNIVERSITY OF SÃO PAULO   (Brazil)

^e UNIVERSIDADE LUTERANA DO BRASIL   (Brazil)

^f FEDERAL UNIVERSITY OF RIO GRANDE DO SUL   (Brazil)

Author keywords

Adhesive systems; Application; Bond strength; Durability; Self etch

Indexed keywords

CLEARFIL SE BOND; DENTIN BONDING AGENT; FILTEK Z250; IBOND; PROMPT L POP; PROMPT L-POP; RESIN; RESIN CEMENT; UNCLASSIFIED DRUG; WATER; XENO III;

ARTICLE; CHEMISTRY; DENTAL BONDING; DENTIN; HUMAN; HYDROPHOBICITY; MATERIALS TESTING; MECHANICAL STRESS; SURFACE PROPERTY; SURVIVAL; TENSILE STRENGTH; TIME; TOOTH CROWN; ULTRASTRUCTURE;

COMPOSITE RESINS; CROWNS; DENTAL BONDING; DENTIN; DENTIN-BONDING AGENTS; HUMANS; HYDROPHOBICITY; MATERIALS TESTING; RESIN CEMENTS; STRESS, MECHANICAL; SURFACE PROPERTIES; SURVIVAL ANALYSIS; TENSILE STRENGTH; TIME FACTORS; WATER;

EID: 41949094632     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2008.01.018     Document Type: Article

References (41)

1. Van Meerbeek B., De Munck J., Yoshida Y., Inoue S., Vargas M., Vijay P., et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Operative Dentistry 28 (2003) 215-235
2. Tay F.R., Pashley D.H., Suh B.I., Hiraishi N., and Yiu C.K.Y. Water treeing in simplified dentin adhesives-déjà vu?. Operative Dentistry 30 (2005) 561-579
3. Van Landuyt K.L., Snauwaert J., De Munck J., Peumans M., Yoshida Y., Poitevin A., et al. Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials 28 (2007) 3757-3785
4. Cheong C., King N.M., Pashley D.H., Ferrari M., Toledano M., and Tay F.R. Incompatibility of self-etch adhesives with chemical/dual-cured composites: two-step vs. one-step systems. Operative Dentistry 28 (2003) 747-755
5. Tay F.R., Pashley D.H., Suh B.I., Carvalho R.M., and Itthagarun A. Single-step adhesives are permeable membranes. Journal of Dentistry 30 (2002) 371-382
6. Tay F.R., Pashley D.H., Garcia-Godoy F., and Yiu C.K. Single-step, self-etch adhesives behave as permeable membranes after polymerisation. Part II. Silver tracer penetration evidence. American Journal of Dentistry 17 (2004) 315-322
7. Tay F.R., Pashley D.H., Suh B., Carvalho R., and Miller M. Single-step, self-etch adhesives behave as permeable membranes after polymerisation. Part I. Bond strength and morphologic evidence. American Journal of Dentistry 17 (2004) 271-278
8. Itthagarun A., Tay F.R., Pashley D.H., Wefel J.S., Garcia-Godoy F., and Wei S.H. Single-step, self-etch adhesives behave as permeable membranes after polymerisation. Part III. Evidence from fluid conductance and artificial caries inhibition. American Journal of Dentistry 17 (2004) 394-400
9. Jacobsen T., and Söderholm K.J. Some effects of water on dentin bonding. Dental Materials 11 (1995) 132-136
10. Cadenaro M., Antoniolli F., Sauro S., Tay F.R., Di Lenarda R., Prati C., et al. Degree of conversion and permeability of dental adhesives. European Journal of Oral Sciences 113 (2005) 525-530
11. Spencer P., and Wang Y. Adhesive phase separation at the dentin interface under wet bonding conditions. Journal of Biomedical Materials Research 62 (2002) 447-456
12. Van Landuyt K.L., De Munck J., Snauwaert J., Coutinho E., Poitevin A., Yoshida Y., et al. Monomer-solvent phase separation in one-step self-etch adhesives. Journal of Dental Research 84 (2005) 183-188
13. Takahashi A., Sato Y., Uno S., Pereira P.N.R., and Sano H. Effects of mechanical properties of adhesives on bond strength to dentin. Dental Materials 18 (2002) 263-268
14. Reis A., Grandi V., Carlotto L., Bortoli G., Patzlaff R., Accorinte M.L., et al. Effect of smear layer thickness and acidity of self-etching solution on early and long-term bond strength to dentin. Journal of Dentistry 33 (2005) 549-559
15. De Munck J., Van Landuyt K., Peumans M., Poitevin A., Lambrechts P., Braem M., et al. A critical review of the durability of adhesion to tooth tissue: methods and results. Journal of Dental Research 84 (2005) 118-132
16. Hashimoto M., Sano H., Yoshida E., Hori M., Kaga M., Oguchi H., et al. Effects of multiple adhesive coatings on dentin bonding. Operative Dentistry 29 (2004) 416-423
17. Ito S., Tay F.R., Hashimoto M., Yoshiyama M., Saito T., Brackett W.W., et al. Effects of multiple coatings of two all-in-one adhesives on dentin bonding. Journal of Adhesive Dentistry 7 (2005) 133-141
18. King N.M., Tay F.R., Pashley D.H., Hashimoto M., Ito S., Brackett W.W., et al. Conversion of one-step to two-step self-etch adhesives for improved efficacy and extended application. American Journal of Dentistry 18 (2005) 126-134
19. Bracket W.W., Ito S., Tay F.R., Haisch L.D., and Pashley D.H. Microtensile bond strength of self-etching resins: effect of a hydrophobic layer. Operative Dentistry 30 (2005) 733-738
20. Van Landuyt K.L., Peumans M., De Munck J., Lambrechts P., and Van Meerbeek B. Extension of a one-step self-etch adhesive into a multi-step adhesive. Dental Materials 22 (2006) 533-544
21. Toledano M., Proenca J.P., Erhardt M.C., Osorio E., Aguilera F.S., Osorio R., et al. Increases in dentin-bond strength if doubling application time of an acetone-containing one-step adhesive. Operative Dentistry 32 (2007) 133-137
22. Nakaoki Y., Sasakawa W., Horiuchi S., Nagano F., Ikeda T., Tanaka T., et al. Effect of double-application of all-in-one adhesives on dentin bonding. Journal of Dentistry 33 (2005) 765-772
23. Camps J., and Pashley D.H. Buffering action of human dentin in vitro. Journal of Adhesive Dentistry 2 (2000) 39-50
24. Gregoire G., and Millas A. Microscopic evaluation of dentin interface obtained with 10 contemporary self-etching systems: correlation with their pH. Operative Dentistry 30 (2005) 481-491
25. Nishitani Y., Yoshiyama M., Wadgaonkar B., Breschi L., Mannello F., Mazzoni A., et al. Activation of gelatinolytic/collagenolytic activity in dentin by self-etching adhesives. European Journal of Oral Sciences 114 (2006) 160-166
26. Tay F.R., and Pashley D.H. Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers. Dental Materials 17 (2001) 296-308
27. Oliveira S.S., Marshall S.J., Habelitz S., Gansky S.A., Wilson R.S., and Marshall Jr. G.W. The effect of a self-etching primer on the continuous demineralization of dentin. European Journal of Oral Sciences 112 (2004) 376-383
28. Wang Y., and Spencer P. Continuing etching of an all-in-one adhesive in wet dentin tubules. Journal of Dental Research 84 (2005) 350-354
29. Carvalho R.M., Chersoni S., Frankenberger R., Pashley D.H., Prati C., and Tay F.R. A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives. Biomaterials 26 (2005) 1035-1042
30. Pashley D.H., Tay F.R., Yiu C., Hashimoto M., Breschi L., Carvalho R.M., et al. Collagen degradation by host-derived enzymes during aging. Journal of Dental Research 83 (2004) 216-221
31. Soderhölm K.J. Water sorption in a bis(GMA)/TEGDMA resin. Journal of Biomedical Materials Research 18 (1984) 271-279
32. Kalachandra S., and Turner D.T. Water sorption of polymethacrylate networks: bis-GMA/TEGDM copolymers. Journal of Biomedical Materials Research 21 (1987) 329-338
33. Hebling J., Pashley D.H., Tjaderhane L., and Tay F.R. Chlorhexidine arrests subclinical degradation of dentin hybrid layers in vivo. Journal of Dental Research 84 (2005) 741-746
34. Carrilho M.R., Geraldeli S., Tay F., de Goes M.F., Carvalho R.M., Tjaderhane L., et al. In vivo preservation of the hybrid layer by chlorhexidine. Journal of Dental Research 86 (2007) 529-533
35. Yiu C.K., King N.M., Pashley D.H., Suh B.I., Carvalho R.M., Carrilho M.R., et al. Effect of resin hydrophilicity and water storage on resin strength. Biomaterials 25 (2004) 5789-5796
36. Tay F.R., Pashley D.H., Yiu C.K., Sanares A.M., and Wei S.H. Factors contributing to the incompatibility between simplified-step adhesives and chemically cured or dual-cured composites. Part I. Single-step self-etching adhesive. Journal of Adhesive Dentistry 5 (2003) 27-40
37. Carrilho M.R., Tay F.R., Pashley D.H., Tjaderhane L., and Carvalho R.M. Mechanical stability of resin-dentin bond components. Dental Materials 21 (2005) 232-241
38. Ito S., Hashimoto M., Wadgaonkar B., Svizero N., Carvalho R.M., Yiu C., et al. Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials 26 (2005) 6449-6459
39. Malacarne J., Carvalho R.M., de Goes M.F., Svizero N., Pashley D.H., Tay F.R., et al. Water sorption/solubility of dental adhesive resins. Dental Materials 22 (2006) 973-980
40. Choi K.K., Condon J.R., and Ferracane J.L. The effects of adhesive thickness on the polymerization contraction stress of composite. Journal of Dental Research 79 (2000) 812-817
41. Koike T., Hasegawa T., Itoh K., Yukitani W., Yamashita T., Wakumoto S., et al. Effect of multiple application of a dentin adhesive on contraction gap width of a resin-based composite. American Journal of Dentistry 15 (2002) 159-163