Design optimization of a total hip prosthesis for wear reduction

Journal of Biomechanical Engineering

Volumn 131, Issue 5, 2009, Pages

  Matsoukas, George ^a   Kim, Il Yong ^a  

^a QUEEN S UNIVERSITY   (Canada)

Author keywords

Design optimization; Finite element method; Polyethylene wear assessment; Range of motion; Total hip replacement

Indexed keywords

ACETABULAR LINERS; ASEPTIC LOOSENING; COMPUTATIONAL MODEL; COMPUTED TOMOGRAPHY SCAN; CONTACT PRESSURES; CREEP DAMAGES; DESIGN OPTIMIZATION; DESIGN VARIABLES; DISCRETE INTERVALS; HIP IMPLANTS; IMPLANT COMPONENTS; IN-VITRO; LINER SURFACE; LOADING CONDITION; OBJECTIVE FUNCTIONS; OPTIMIZED DESIGNS; OPTIMUM DESIGNS; OSTEOLYSIS; PHYSIOLOGICAL RANGE; POLYETHYLENE DEBRIS; POLYETHYLENE WEAR; RANGE OF MOTIONS; STAIR-CLIMBING; THREE DIMENSIONAL FINITE ELEMENT MODEL; TOTAL HIP REPLACEMENTS; VOLUMETRIC WEAR; WEAR DEBRIS; WEAR REDUCTION;

COMPUTERIZED TOMOGRAPHY; CREEP; DEBRIS; DESIGN; FAILURE ANALYSIS; HIP PROSTHESES; OPTIMIZATION; ORGANIC POLYMERS; POLYETHYLENES; PROSTHETICS; SENSITIVITY ANALYSIS; STAIRS; THERMOPLASTICS; THREE DIMENSIONAL;

FINITE ELEMENT METHOD;

POLYETHYLENE;

ARTICLE; BIOMECHANICS; BIOMEDICAL ENGINEERING; COMPUTER MODEL; CONTROLLED STUDY; ENDOPROSTHESIS LOOSENING; FEMUR; FINITE ELEMENT ANALYSIS; JOINT MOBILITY; MECHANICAL STRESS; TOTAL HIP PROSTHESIS; WALKING; WEIGHT BEARING; CHEMISTRY; HIP; HIP ARTHROPLASTY; HIP PROSTHESIS; HUMAN; PATHOPHYSIOLOGY; PROSTHESIS FAILURE;

ARTHROPLASTY, REPLACEMENT, HIP; FINITE ELEMENT ANALYSIS; HIP JOINT; HIP PROSTHESIS; HUMANS; POLYETHYLENE; PROSTHESIS FAILURE;

EID: 67651154574     PISSN: 01480731     EISSN: 15288951     Source Type: Journal    
DOI: 10.1115/1.3049862     Document Type: Article

References (40)

1. Kurtz, W. D., Lau, E., Zhao, K., Mowat, F., Ont, K., and Halpern, M., 2006, "The Future Burden of Hip and Knee Revisions: US Projections From 2005 to 2030," 73rd Annual Meeting of the American Academy of Orthopaedic Surgeons, Chicago, IL.
2. Sargeant, A., and Goswami, T., 2006, "Hip Implants: Paper V. Physiological Effects," Mater. Des., 27(4), pp. 287-07.
3. Wolff, J., 1892, Das Gesetz der Transformation der Knochen, A. Hirschwald, Berlin.
4. Huiskes, R., and Boeklagen, R., 1989, "Mathematical Shape Optimization of Hip Prosthesis Design," J. Biomech., 22, pp. 793-804.
5. Yoon, S. Y., Jang, G. H., and Kim, Y. Y., 1989, "Shape Optimal Design of the Stem of a Cemented Hip Prosthesis to Minimize Stress Concentration in the Cement Layer," J. Biomech., 22, pp. 1279-1284.
6. Katoozian, H., and Davy, D. T., 2000, "Effects of Loading Condition and Objective Function on Three-Dimensional Shape Optimization of Femoral Components of Hip Endoprostheses," Med. Eng. Phys., 22, pp. 243-251.
7. Katoozian, H., Davy, D. T., Arshi, A., and Saadati, U., 2001, "Material Optimization of Femoral Component of Total Hip Prosthesis Using Fiber Reinforced Polymeric Composites," Med. Eng. Phys., 23, pp. 503-509. (Pubitemid 32913175)
8. Gross, S., and Abel, E. W., 2001, "A Finite Element Analysis of Hollow Stemmed Hip Prostheses as a Means of Reducing Stress Shielding of the Femur," J. Biomech., 34, pp. 995-1003. (Pubitemid 32633771)
9. Kowalczyk, P., 2001, "Design Optimization of Cementless Femoral Hip Prostheses Using Finite Element Analysis," ASME J. Biomech. Eng., 123, pp. 396-402. (Pubitemid 32938936)
10. Fernandes, P. R., Folgado, J., and Ruben, R. B., 2004, "Shape Optimization of a Cementless Hip Stem for a Minimum of Interface Stress and Displacement," Comput. Methods Biomech. Biomed. Eng., 7, pp. 51-61.
11. Ruben, R. B., Folgado, J., and Fernandes, P. R., 2007, "Three-Dimensional Shape Optimization of Hip Prostheses Using a Multicriteria Formulation," Struct. Multidiscip. Optim., 34(3), pp. 261-275. (Pubitemid 47185296)
12. Matsoukas, G., Kim, I. Y., and Willing, R., 2007, "Total Hip Wear Assessment: A Comparison Between Computational and In Vitro Wear Assessment Techniques Using ISO 14242 Loading and Kinematics," ASME J. Biomech. Eng. In Press.
13. Harris, W. H., 1995, "The Problem is Osteolysis," Clin. Orthop. Relat. Res., 311, pp. 46-53.
14. Dumbleton, J. H., Manley, M. T., and Edidin, A. A., 2002, "A Literature Review of the Association Between Wear Rate and Osteolysis in Total Hip Arthroplasty," J. Arthroplasty, 17(5), pp. 649-661.
15. Shanbhag, A. S., Sethi, M. K., and Rubash, H. E., 2007, "Biological Response to Wear Debris: Cellular Interaction Causing Osteolysis," The Adult Hip, J. J. Callaghan, A. G. Rosenberg, and H. E. Rubash, eds., Lippincott Williams and Wilkins, Philadelphia, PA, Vol. 1, pp. 286-299.
16. Lundberg, H. J., Pedersen, D. R., Baer, T. E., Muste, M., Callaghan, J. J., and Brown, T. D., 2007, "Effects of Implant Design Parameters on Fluid Convection, Potentiating Third-Body Debris Ingress Into the Bearing Surfaces During THA Impingement/Subluxation," J. Biomech., 40(8), pp. 1676-1685. (Pubitemid 46702155)
17. Wooley, P. H., and Schwarz, E. M., 2004, "Aseptic Loosening," Gene Ther., 11, pp. 402-407.
18. Arora, J. S., 2004, Introduction to Optimum Design, 2nd ed., Elsevier Academic, New York.
19. Viceconti, M., Doblare, M., Cerrolaza, M., and Rodriguez, H., 2003, "The Living Human Project," International Congress on Computational Bioengineering, Zaragoza, Spain.
20. Kuiper, J. H., and Huiskes, R., 1996, "Friction and Stem Stiffness Affect Dynamic Interface Motion in Total Hip Replacement," J. Orthop. Res., 14, pp. 36-43. (Pubitemid 26091600)
21. Bergmann, G., 1998, "Hip98 Compact Disc - Loading of the Hip Joint."
22. Graichen, F., Bergmann, G., and Rohlmann, A., 1999, "Hip Endoprosthesis for In Vivo Measurement of Joint Force and Temperature," J. Biomech., 32, pp. 1113-1117.
23. Bergmann, G., Deuretzbacher, G., Heller, M., Graichen, F., Rohlmann, A., Strauss, J., and Duda, G. N., 2001, "Hip Contact Forces and Gait Patterns From Routine Activities," J. Biomech., 34, pp. 859-871. (Pubitemid 32530054)
24. Heller, M. O., Bergmann, G., Deuretzbacher, G., Durselen, L., Pohl, M., Claes, L., Haas, N. P., and Duda, G. N., 2001, "Musculo-Skeletal Loading Conditions at the Hip During Walking and Stair Climbing," J. Biomech., 34, pp. 883-893.
25. Heller, M. O., Bergmann, G., Kassi, J. P., Claes, L., Haas, N. P., and Duda, G. N., 2005, "Determination of Muscle Loading at the Hip Joint for Use in Pre-Clinical Testing," J. Biomech., 38, pp. 1155-1163. (Pubitemid 40439206)
26. Cripton, P. A., 1993, "Compressive Characterization of Ultra High Molecular Weight Polyethylene With Applications to Contact Stress Analysis of Total Knee Replacements," MS thesis, Queen's University, Kingston.
27. Ashman, R. B., Cowin, S. C., Van Buskirk, W. C., and Rice, J. C., 1984, "A Continuous Wave Technique for the Measurement of the Elastic Properties of Cortical Bone," J. Biomech., 17, pp. 349-361.
28. Ashman, R. B., Rho, J. Y., and Turner, C. H., 1989, "Anatomical Variation of Orthotropic Elastic Moduli of the Proximal Human Tibia," J. Biomech., 22, pp. 895-900.
29. Archard, J. F., 1953, "Contact and Rubbing of Flat Surfaces," J. Appl. Phys., 24(8), pp. 981-988.
30. Archard, J. F., 1956, "The Wear of Metals Under Unlubricated Conditions," Proc. R. Soc. London, Ser. A, 236(1206), pp. 397-410.
31. Marshek, K. M., and Chen, H. H., 1989, "Discretization Pressure-Wear Theory for Bodies in Sliding Contact," ASME J. Tribol., 111(1), pp. 95-100.
32. Maxian, T. A., Brown, T. D., Pedersen, D. R., and Callaghan, J. J., 1996, "A Sliding-Distance-Coupled Finite Element Formulation for Polyethylene Wear in Total Hip Arthroplasty," J. Biomech., 29(5), pp. 687-692.
33. Maxian, T. A., Brown, T. D., Pedersen, D. R., and Callaghan, J. J., 1996, "Adaptive Finite Element Modeling of Long-Term Polyethylene Wear in Total Hip Arthroplasty," J. Orthop. Res., 14(4), pp. 668-675.
34. Maxian, T. A., Brown, T. D., Pedersen, D. R., and Callaghan, J. J., 1996, "3-Dimensional Sliding/Contact Computational Simulation of Total Hip Wear," Clin. Orthop. Relat. Res., 333, pp. 41-50.
35. Maxian, T. A., Brown, T. D., Pedersen, D. R., McKellop, H. A., Lu, B., and Callaghan, J. J., 1997, "Finite Element Analysis of Acetabular Wear: Validation, Backing and Fixation Effects," Clin. Orthop. Relat. Res., 344, pp. 111-117. (Pubitemid 27490641)
36. Lee, K. Y., and Pienkowski, D., 1998, "Compressive Creep Characteristics of Extruded Ultra-High Molecular Weight Polyethylene," J. Biomed. Mater. Res., 39(2), pp. 261-265.
37. Bevill, S. L., Bevill, G. R., Penmetsa, J. R., Petrella, A. J., and Rullkoetter, P. J., 2005, "Finite Element Simulation of Early Creep and Wear in Total Hip Arthroplasty," J. Biomech., 38(12), pp. 2365-2374.
38. Penmetsa, J. R., Laz, P. J., Petrella, A. J., and Rullkoetter, P. J., 2006, "Influence of Polyethylene Creep Behavior on Wear in Total Hip Arthroplasty," J. Orthop. Res., 24(3), pp. 422-427.
39. Morlock, M., Schneider, E., Bluhm, A., Vollmer, M., Bergmann, G., Muller, V., and Honl, M., 2001, "Duration and Frequency of Every Day Activities in Total Hip Patients," J. Biomech., 34, pp. 873-881.
40. ISO 14242-1, 2002, "Implants for Surgery - Wear of Total Hip-Joint Prostheses - Part 1: Loading and Displacement Parameters for Wear-Testing Machines and Corresponding Environmental Conditions for Test."