3-Dimensional sliding/contact computational simulation of total hip wear

Clinical Orthopaedics and Related Research

Volumn 333, Issue , 1996, Pages 41-50

  Maxian, Tina A ^a   Brown, Thomas D ^a   Pedersen, Douglas R ^a   Callaghan, John J ^a  

^a UNIVERSITY OF IOWA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMECHANICS; COMPUTER MODEL; CONFERENCE PAPER; PRIORITY JOURNAL; PROSTHESIS FAILURE; TOTAL HIP PROSTHESIS; ARTICLE; COMPUTER SIMULATION; HIP PROSTHESIS; HUMAN; MECHANICAL STRESS; PROSTHESES AND ORTHOSES;

POLYETHYLENE DERIVATIVE;

COMPUTER SIMULATION; HIP PROSTHESIS; HUMANS; POLYETHYLENES; PROSTHESES AND IMPLANTS; STRESS, MECHANICAL;

EID: 0030345394     PISSN: 0009921X     EISSN: 15281132     Source Type: Journal    
DOI: 10.1097/00003086-199612000-00005     Document Type: Conference Paper

References (38)

1. Archard JF: Contact and rubbing of flat surfaces. J Appl Physiol 24:981-988, 1953.
2. Atkinson JR, Dowson D, Isaac JH, Wroblewski BM: Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints. III: The measurement of internal volume changes in explanted Charnley sockets after 2-16 years in-vivo and the determination of wear factors. Wear 104:225-244, 1985.
3. Bartel DL, Bucknell VS, Wright TM: The effect of conformity, thickness and material stresses on ultra-high molecular weight components for total joint replacement. J Bone Joint Surg 68A:1041-1051, 1986.
4. Bartel DL, Burstein AH, Toda MD, Edwards DL: The effect of conformity and plastic thickness on contact stresses in metal-backed plastic implants. J Biomech Eng 107:193-199, 1985.
5. Bartel DL, Rawlinson JJ, Burstein AH, Ranawat CS, Flynn WF: Stresses in polyethylene components of contemporary total knee replacements. Clin Orthop 317:76-82, 1995.
6. Brand RA, Pedersen DR, Davy DT, et al: Comparison of hip force calculations and measurements in the same patient. J Arthroplasty 9:45-51, 1994.
7. Briscoe BJ, Stolarski TA: The Influence of Contact Zone Kinematics on Wear Processes of Polymers In Ludema KC, Bayer RG (eds). Wear of Materials. New York, ASME 187-192, 1991.
8. Callaghan JJ, Pedersen DR, Olejniczak JP, Goetz DD, Johnston RC: Radiographic measurement of wear in 5 cohorts of patients observed for 5 to 22 years. Clin Orthop 317:14-18, 1995.
9. Charnley J: Low Friction Arthroplasty of the Hip: Theory and Practice. Berlin, Springer 1979.
10. Clarke IC, Fujisawa A, Jung H: Influence of THR ball diameter on polyethylene wear rates. Trans Soc Biomaterials 19:57, 1993.
11. Clarke IC, Kabo M: Wear in Total Hip Replacement. In HC Amstutz (ed). Total Hip Arthroplasty. New York. Churchill-Livingstone 535-570, 1991.
12. Devane PA, Bourne RB, Rorabeck CH, MacDonald S, Robinson EJ: Measurement of polyethylene wear in metal-backed acetabular cups. II. clinical application. Clin Orthop 319:317-326, 1995.
13. Dowson D: Discussion to "Quality of the surface finish of the head of the femoral component and the wear rate of the socket in long-term results of the Charnley low-friction arthroplasty," by BM Wrobleski, et al. Proc Inst Mech Eng [H] 206:251-252, 1992.
14. Dowson D, Jobbins B: Design and development of a versatile hip joint simulator and a preliminary assessment of wear and creep in Charnley total replacement hip joints. Eng Med 17:111-117, 1988.
15. Dumbleton JH, Miller DA, Miller EH: A simulator for load bearing joints. Med Biol Eng 8:37-43, 1972.
16. Hodge WA, Carlson KL, Fijan RS, et al: Contact pressures from an instrumented hip endoprosthesis. J Bone Joint Surg 71A:1378-1386, 1989.
17. Jasty M, Goetz DD, Bragdon CR, et al: Clinical Variables Affecting Wear of Polyethylene Acetabular Components in Total Hip Arthroplasty: Analysis of 128 Components Retrieved From Autopsy and Revision Surgery. Trans 42nd Orthop Res Soc 43, 1996.
18. Kabo JM, Gebhard JS, Loren G, Amstutz HC: In vivo wear of polyethylene acetabular components. J Bone Joint Surg 75B:254-258, 1993.
19. Livermore J, Ilstrup D, Morrey B: Effect of femoral head size on wear of the polyethylene acetabular component. J Bone Joint Surg 72A:518-528, 1990.
20. Marshek KM, Chen HH: Discretization pressure-wear theory for bodies in sliding contact. J Tribology 111:95-100, 1989.
21. Maxian TA, Brown TD, Pedersen DR, Callaghan JJ: A sliding-distance-coupled finite element formulation for polyethylene wear in total hip arthroplasty. J Biomech 29:687-692, 1996.
22. Maxian TA, Brown TD, Pedersen DR, Callaghan JJ: Adaptive finite element modeling of long-term polyethylene wear in total hip arthroplasty. J Orthop Res 14:668-675, 1996.
23. McKellop H, Campbell P, Park S, et al: The origin of sub-micron polyethylene wear debris in total hip arthroplasty. Clin Orthop 311:3-20, 1995.
24. McKellop HA, Clarke IC: Evolution and Evaluation of Materials-Screening Machines and Joint Simulators in Predicting In Vivo Wear Phenomena. In Ducheyne P, Hastings GW (eds). Functional Behavior of Orthopaedic Biomaterials. Applications. Vol II. Boca Raton, FL, CRC Press 51-85, 1984.
25. McKellop H, Ebramzadeh E, Lu B, Sarmiento A: Effect of ball material, diameter, and surface roughness on the wear of polyethylene acetabular cups. Trans Soc Biomat 21:46, 1995.
26. Mejia LC, Briefly TJ: A hip wear simulator for the evaluation of biomaterials in hip arthroplasty components. Biomed Mater Eng 4:259-271, 1991.
27. Northfield MR, Schmalzried TP, Belcher G, Amstutz HC: Quantitative assessment of activity in joint replacement patients. Trans Orthop Res Soc 40:680, 1994.
28. Rimnac C, Klein R, Burstein AH, Wright TM, Santer T: In vitro chemical and mechanical degradation of UHMWPE: One year results. Trans Orthop Res Soc 40:175, 1994.
29. Rimnac CM, Wilson PD, Fuchs MD, Wright TM: Acetabular cup wear in total hip arthroplasty. Orthop Clin North Am 19:631-636, 1988.
30. Rostocker W, Galante JO: Contact pressure dependence of wear rates of ultra high molecular weight polyethylene. J Biomed Mater Res 13:957-964, 1979.
31. Saikko V, Paavolainen P, Kleimola M, Slatis P: A five-station hip joint simulator for wear rate studies. Proc Inst Mech Eng 206:195-200, 1992.
32. Semlitsch M, Lehmann M, Weber H, Doerre E, Willert H: New prospects for a prolonged functional life-span of artificial hip joints by using the material combination polyethylene/aluminum oxide ceramic/metal. J Biomed Mater Res 11:537-552, 1977.
33. Streicher RM, Schon R: Tribological behavior of various materials and surfaces against polyethylene. Trans Soc Biomat 17:289, 1991.
34. Walker PS, Salvati E: The measurement and effects of friction and wear in artificial hip joints. J Biomed Mater Res Symp 4:327, 1973.
35. Willert HG, Semlitsch M: Reactions of the articular capsule to wear products of artificial joint prostheses. J Biomed Mater Res 11:157-164, 1977.
36. Woolson ST, Murphy MG: Wear of polyethylene of Harris-Galante acetabular components inserted without cement. J Bone Joint Surg 77A: 1311-1314, 1995.
37. Wrobiewski BM: Direction and rate of socket wear in Charnley low-friction arthroplasty. J Bone Joint Surg 67B:757-761, 1985.
38. Wright KWJ, Scales JT: The Use of Hip Joint Simulators for the Evaluation of Wear of Total Hip Prostheses. In Winter GD, Leray JL, deGroot K (eds). Evaluation of Biomaterials. Chichester, John Wiley 135-146, 1977.