Introduction to Optimum Design

Introduction to Optimum Design

Volumn , Issue , 2004, Pages 1-728

  Arora, Jasbir S ^a  

^a UNIVERSITY OF IOWA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84903660256     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-12-064155-0.X5000-9     Document Type: Book

References (233)

1. AA (1986) Construction manual series. Section 1, No. 30. Washington. D.C.: The Aluminum Association
2. J. Abadie (Eds) (1970) Nonlinear programming Amsterdam: North Holland
3. J. Abadie and J. Carpenter (1969) Generalization of the Wolfe reduced gradient method to the case of nonlinear constraints. R. Fletcher (Eds) Optimization New York: Academic Press 37-47.
4. H. Adelman and R.T. Haftka (1986) Sensitivity analysis of discrete structural systems. AIAA Journal 24(5), 823-832.
5. AISC (1989) 9th ed. (Eds) Manual of steel construction: Allowable stress design Chicago: American Institute of Steel Construction
6. S.S. Al-Saadoun and J.S. Arora (1989) Interactive design optimization of framed structures. Journal of Computing in Civil Engineering, ASCE 3(1), 60-74.
7. J.S. Arora (1984) An algorithm for optimum structural design without line search. E. Atrek, R.H. Gallagher, K.M. Ragsdell, O.C. Zienkiewicz (Eds) New directions in optimum structural design New York: John Wiley & Sons 429-441.
8. J.S. Arora (1995) Structural design sensitivity analysis: Continuum and discrete approaches. J. Herskovits (Eds) Advances in Structural Optimization Boston: Kluwer Academic Publishers 47-70.
9. J.S. Arora (1999) Optimization of structures subjected to dynamic loads. C.T. Leondes (Eds) Structural dynamic systems: Computational techniques and optimization Vol. 7 Newark, NJ: Gordon & Breech Publishers 1-73.
10. J.S. Arora (2002) Methods for discrete variable structural optimization. S. Burns (Eds) Recent advances in optimal structural design Reston, VA: Structural Engineering Institute, ASCE 1-40.
11. J.S. Arora (Eds) (1997) Guide to structural optimization, ASCE Manuals and Reports on Engineering Practice, No. 90 Reston, VA: American Society of Civil Engineering
12. J.S. Arora and E.J. Haug (1979) Methods of design sensitivity analysis in structural optimization. AIAA Journal 77(9), 970-974.
13. J.S. Arora and M.W. Huang (1996) Discrete structural optimization with commercially available sections: A review. Journal of Structural and Earthquake Engineering, JSCE 13(2), 93-110.
14. J.S. Arora and P.B. Thanedar (1986) Computational methods for optimum design of large complex systems. Computational Mechanics 7(2), 221-242.
15. J.S. Arora and C.H. Tseng (1987) User's manual for IDESIGN: Version 3.5. Iowa City: Optimal Design Laboratory, College of Engineering, The University of Iowa
16. J.S. Arora and C.H. Tseng (1987) An investigation of Pshenichnyi's recursive quadratic programming method for engineering optimization—A discussion. Journal of Mechanisms, Transmissions and Automation in Design, Transactions of the ASME 709(6), 254-256.
17. J.S. Arora and C.H. Tseng (1988) Interactive design optimization. Engineering Optimization 13 173-188.
18. J.S. Arora, S. Burns and M.W. Huang (1997) What is optimization? J.S. Arora (Eds) Guide to structural optimization, ASCE Manual on Engineering Practice, No. 90 Reston, VA: American Society of Civil Engineers 1-23.
19. J.S. Arora, A.I. Chahande and J.K. Paeng (1991) Multiplier methods for engineering optimization. International Journal for Numerical Methods in Engineering 32 1485-1525.
20. J.S. Arora, M.W. Huang and C.C. Hsieh (1994) Methods for optimization of nonlinear problems with discrete variables: A review. Structural Optimization 8(2/3), 69-85.
21. J.S. Arora, O.A. Elwakeil, A.I. Chahande and C.C. Hsieh (1995) Global optimization methods for engineering applications: A review. Structural Optimization 9 137-159.
22. T.W. Athan and P.Y. Papalambros (1996) A note on weighted criteria methods for compromise solutions in multi-objective optimization. Engineering Optimization 27 155-176.
23. K.E. Atkinson (1978) An introduction to numerical analysis. New York: John Wiley & Sons
24. R.J. Balling (2000) Pareto sets in decision-based design. Journal of Engineering Valuation and Cost Analysis 3(2), 189-198.
25. R.J. Balling (2003) The maximin fitness function: Multi-objective city and regional planning. C.M. Fonseca, P.J. Fleming, E. Zitzler, K. Deb, L. Thiele (Eds) Second International Conference on Evolutionary Multi-Criterion Optimization Faro, Portugal, April 8-11, 2003 Berlin: Springer Publishing 1-15.
26. R.J. Balling, J.T. Taber, M.R. Brown and K. Day (1999) Multiobjective urban planning using genetic algorithm. Journal of Urban Planning and Development 125(2), 86-99.
27. R.J. Balling, J.T. Taber, K. Day and S. Wilson (2000) Land use and transportation planning for twin cities using a genetic algorithm. Transportation Research Record 1722 67-74.
28. D.L. Bartel (1969) Optimum design of spatial structures. Doctoral Dissertation Iowa City: College of Engineering, The University of Iowa
29. A.D. Belegundu and J.S. Arora (1984) A recursive quadratic programming algorithm with active set strategy for optimal design. International Journal for Numerical Methods in Engineering 20(5), 803-816.
30. A.D. Belegundu and J.S. Arora (1984) A computational study of transformation methods for optimal design. AIAA Journal 22(4), 535-542.
31. A.D. Belegundu and J.S. Arora (1985) A study of mathematical programming methods for structural optimization. International Journal for Numerical Methods in Engineering 21(9), 1583-1624.
32. W.W. Bell (1975) Matrices for scientists and engineers. New York: Van Nostrand Reinhold
33. L. Blank and A. Tarquin (1983) 2nd ed. (Eds) Engineering economy New York: McGraw-Hill
34. F.H. Branin and S.K. Hoo (1972) A method for finding multiple extrema of a function of n variables. F.A. Lootsma (Eds) Numerical methods of nonlinear optimization London: Academic Press
35. D.G. Carmichael (1980) Computation of pareto optima in structural design. International Journal for Numerical Methods in Engineering 15 925-952.
36. T.R. Chandrupatla and A.D. Belegundu (1997) Introduction to finite elements in engineering. 2nd ed. (Eds) Upper Saddle River, NJ: Prentice Hall
37. S.Y. Chen and S.D. Rajan (2000) A robust genetic algorithm for structural optimization. Structural Engineering and Mechanics 10 313-336.
38. W. Chen, A. Sahai, A. Messac and G. Sundararaj (2000) Exploration of the effectiveness of physical programming in robust design. Journal of Mechanical Design 122 155-163.
39. F.Y. Cheng and D. Li (1997) Multiobjective optimization design with pareto genetic algorithm. Journal of Structural Engineering 123 1252-1261.
40. F.Y. Cheng and D. Li (1998) Genetic algorithm development for multiobjective optimization of structures. AIAA Journal 36 1105-1112.
41. A.K. Chopra (1995) Dynamics of structures: Theory and applications to earthquake engineering. Upper Saddle River, NJ: Prentice-Hall
42. R.W. Clough and J. Penzien (1975) Dynamics of structures. New York: McGraw-Hill
43. C.A. Coello-Coello, D.A. Van Veldhuizen and G.B. Lamont (2002) Evolutionary algorithms for solving multi-objective problems. New York: Kluwer Academic Publishers
44. J.L. Cohon (1978) Multiobjective programming and planning. New York: Academic Press
45. R.D. Cook (1981) Concepts and applications of finite element analysis. New York: John Wiley & Sons
46. L. Cooper and D. Steinberg (1970) Introduction to methods of optimization. Philadelphia: W. B. Saunders
47. P.J. Corcoran (1970) Configuration optimization of structures. International Journal of Mechanical Sciences 12 459-462.
48. S.H. Crandall, H.C. Dahl and T.J. Lardner (1978) Introduction to mechanics of solids. New York: McGraw-Hill
49. R.J. Dakin (1965) A tree-search algorithm for mixed integer programming problems. Computer Journal 8 250-255.
50. I. Das and J.E. Dennis (1997) A closer look at drawbacks of minimizing weighted sums of objectives for pareto set generation in multicriteria optimization problems. Structural Optimization 14 63-69.
51. W.C. Davidon (1959) Variable metric method for minimization (Research and Development Report ANL-5990). Argonne, Illinois: Argonne National Laboratory
52. C. De Boor (1978) A practical guide to splines: Applied mathematical sciences Vol. 27 New York: Springer-Verlag
53. K. Deb (1989) Genetic algorithms in multimodal function optimization. Masters Thesis Tuscaloosa, AL: University of Alabama TCGA Report No. 89002
54. K. Deb (2001) Multi-objective optimization using evolutionary algorithms. Chichester, UK: John Wiley & Sons
55. A.S. Deif (1982) Advanced matrix theory for scientists and engineers. New York: Halsted Press
56. L.C.W. Dixon and G.P. Szego (Eds) (1978) Towards global optimization 2 Amsterdam: North Holland Publishers
57. M. Ehrgott and X. Gandibleux (Eds) (2002) Multiple criteria optimization: state of the art annotated bibliographic surveys Boston: Kluwer Academic Publishers
58. O.A. Elwakeil (1995) Algorithms for global optimization and their application to structural optimization problems. Doctoral Dissertation Iowa City: The University of Iowa
59. O.A. Elwakeil and J.S. Arora (1995) Methods for finding feasible points in constrained optimization. AIAA Journal 33(9), 1715-1719.
60. O.A. Elwakeil and J.S. Arora (1996) Two algorithms for global optimization of general NLP problems. International Journal for Numerical Methods in Engineering 39 3305-3325.
61. O.A. Elwakeil and J.S. Arora (1996) Global optimization of structural systems using two new methods. Structural Optimization 12 1-12.
62. Y.G. Evtushenko Yu.G. (1974) Methods of search for the global extremum. Operations Research, Computing Center of the U.S.S.R Akad. of Sci. 4 39-68.
63. Y.G. Evtushenko Yu.G. (1985) Numerical optimization techniques. New York: Optimization Software
64. A.V. Fiacco and G.P. McCormick (1968) Nonlinear programming: Sequential unconstrained minimization techniques. Philadelphia: Society for Industrial and Applied Mathematics
65. R. Fletcher and M.J.D. Powell (1963) A rapidly convergent descent method for minimization. The Computer Journal 6 163-180.
66. R. Fletcher and R.M. Reeves (1964) Function minimization by conjugate gradients. The Computer Journal 7 149-160.
67. C.A. Floudas, et al. (1999) Handbook of test problems in local and global optimization Norwell, MA: Kluwer Academic Publishers
68. C.M. Fonseca and P.J. Fleming (1993) Genetic algorithms for multiobjective optimization: Formulation, discussion, and generalization. The Fifth International Conference on Genetic Algorithms (Urbana-Champaign, IL) San Mateo, CA: Morgan Kaufmann Publishers 416-423.
69. G.E. Forsythe and C.B. Moler (1967) Computer solution of linear algebraic systems. Englewood Cliffs, NJ: Prentice-Hall
70. J.N. Franklin (1968) Matrix theory. Englewood Cliffs, NJ: Prentice-Hall
71. G.A. Gabrielle and T.J. Beltracchi (1987) An investigation of Pschenichnyi's recursive quadratic programming method for engineering optimization. Journal of Mechanisms, Transmissions and Automation in Design, Transactions of the ASME 109(6), 248-253.
72. M. Gen and R. Cheng (1997) Genetic algorithms and engineering design. New York: John Wiley & Sons
73. J.M. Gere and W. Weaver (1983) Matrix algebra for engineers. Monterey, CA: Brooks/Cole Engineering Division
74. P.E. Gill, W. Murray and M.H. Wright (1981) Practical optimization. New York: Academic Press
75. P.E. Gill, W. Murray and M.H. Wright (1991) Numerical linear algebra and optimization Vol. 1 New York: Addison-Wesley
76. D.E. Goldberg (1989) Genetic algorithms in search, optimization and machine learning. Reading, MA: Addison-Wesley
77. H. Grandin (1986) Fundamentals of the finite element method. New York: Macmillan
78. E.L. Grant, W.G. Ireson and R.S. Leavenworth (1982) 7th ed. (Eds) Principles of engineering economy New York: John Wiley & Sons
79. G. Hadley (1964) Nonlinear and dynamic programming. Reading, MA: Addison-Wesley
80. S.P. Han (1976) Superlinearly convergent variable metric algorithms for general nonlinear programming. Mathematical Programming 11 263-282.
81. S.P. Han (1977) A globally convergent method for nonlinear programming. Journal of Optimization Theory and Applications 22 297-309.
82. E.J. Haug and J.S. Arora (1979) Applied optimal design. New York: Wiley Interscience
83. W. Hock and K. Schittkowski (1981) Test examples for nonlinear programming codes. Lecture Notes in Economics and Mathematical Systems 187 New York: Springer-Verlag
84. F.E. Hohn (1964) Elementary matrix algebra. New York: Macmillan
85. J.H. Holland (1975) Adaptation in natural and artificial system. Ann Arbor, MI: The University of Michigan Press
86. M.J. Hopper (1981) Harwell subroutine library. Oxfordshire, UK: Computer Science and Systems Division, AERE Harwell
87. J. Horn, N. Nafpliotis and D.E. Goldberg (1994) A niched pareto genetic algorithm for multiobjective optimization. The First IEEE Conference on Evolutionary Computation (Orlando, FL) Piscataway, NJ: IEEE Neural Networks Council 82-87.
88. C.C. Hsieh and J.S. Arora (1984) Design sensitivity analysis and optimization of dynamic response. Computer Methods in Applied Mechanics and Engineering 43 195-219.
89. M.W. Huang and J.S. Arora (1995) Engineering optimization with discrete variables. Proceedings of the 36th AIAA SDM Conference New Orleans, April 10-12 1475-1485.
90. M.W. Huang and J.S. Arora (1996) A self-scaling implicit SQP method for large scale structural optimization. International Journal for Numerical Methods in Engineering 39 1933-1953.
91. M.W. Huang and J.S. Arora (1997) Optimal design with discrete variables: Some numerical experiments. International Journal for Numerical Methods in Engineering 40 165-188.
92. M.W. Huang and J.S. Arora (1997) Optimal design of steel structures using standard sections. Structural and Multidisciplinary Optimization 14 24-35.
93. M.W. Huang, C.C. Hsieh and J.S. Arora (1997) A genetic algorithm for sequencing type problems in engineering design. International Journal for Numerical Methods in Engineering 40 3105-3115.
94. K.H. Huebner and E.A. Thornton (1982) The finite element method for engineers. New York: John Wiley & Sons
95. H. Ishibuchi and T. Murata (1996) Multiobjective genetic local search algorithm. 1996 IEEE International Conference on Evolutionary Computation (Nagoya, Japan) Piscataway, NJ: Institute of Electrical and Electronics Engineers 119-124.
96. N.G.R. Iyengar and S.K. Gupta (1980) Programming methods in structural design. New York: John Wiley & Sons
97. V. Javonovic and K. Kazerounian (2000) Optimal design using chaotic descent method. Journal of Mechanical Design, ASME 722(3), 137-152.
98. W. Karush (1939) Minima of functions of several variables with inequalities as side constraints. Masters Thesis Chicago: Department of Mathematics, University of Chicago
99. C.H. Kim and J.S. Arora (2003) Development of simplified dynamic models using optimization: Application to crushed tubes. Computer Methods in Applied Mechanics and Engineering 792(16–18), 2073-2097.
100. F.Y. Kocer and J.S. Arora (1996) Design of prestressed concrete poles: An optimization approach. Journal of Structural Engineering, ASCE 122(1), 804-814.
101. F.Y. Kocer and J.S. Arora (1996) Optimal design of steel transmission poles. Journal of Structural Engineering, ASCE 722(11), 1347-1356.
102. F.Y. Kocer and J.S. Arora (1997) Standardization of transmission pole design using discrete optimization methods. Journal of Structural Engineering, ASCE 123(3), 345-349.
103. F.Y. Kocer and J.S. Arora (1999) Optimal design of H-frame transmission poles subjected to earthquake loading. Journal of Structural Engineering, ASCE 725(11), 1299-1308.
104. F.Y. Kocer and J.S. Arora (2002) Optimal design of latticed towers subjected to earthquake loading. Journal of Structural Engineering, ASCE 128(2), 197-204.
105. J. Koski (1985) Defectiveness of weighting method in multicriterion optimization of structures. Communications in Applied Numerical Methods I 333-337.
106. H.P. Kunzi and W. Krelle (1966) Nonlinear programming. Waltham, MA: Blaisdell Publishing
107. A.M. Land and A.G. Doig (1960) An automatic method of solving discrete programming problems. Econometrica 28 497-520.
108. S.M. Lee and D.L. Olson (1999) Goal programming. T. Gal, T.J. Stewart, T. Hanne (Eds) Multicriteria decision making: Advances in MCDM models, algorithms, theory, and applications Boston: Kluwer Academic Publishers
109. C.E. Lemke (1965) Bimatrix equilibrium points and mathematical programming. Management Science 11 681-689.
110. A.V. Levy and S. Gomez (1985) The tunneling method applied to global optimization. P.T. Boggs, R.H. Byrd, R.B. Schnabel (Eds) Numerical optimization 1984 Philadelphia: Society for Industrial and Applied Mathematics
111. O.K. Lim and J.S. Arora (1986) An active set RQP algorithm for optimal design. Computer Methods in Applied Mechanics and Engineering 57 51-65.
112. O.K. Lim and J.S. Arora (1987) Dynamic response optimization using an active set RQP algorithm. International Journal for Numerical Methods in Engineering 24(10), 1827-1840.
113. S. Lucidi and M. Piccioni (1989) Random tunneling by means of acceptance-rejection sampling for global optimization. Journal of Optimization Theory and Applications 62(2), 255-277.
114. D.G. Luenberger (1984) Linear and nonlinear programming. Reading, MA: AddisonWesley
115. Marier, T. R., & Arora, J. S. (in press). Survey of multiobjective optimization methods for engineering. Structural and Multidisciplinary Optimization.
116. D.W. Marquardt (1963) An algorithm for least squares estimation of nonlinear parameters. SIAM Journal 11 431-441.
117. G.P. McCormick (1967) Second order conditions for constrained optima. SIAM Journal Applied Mathematics 15 641-652.
118. L. Meirovitch (1985) Introduction to dynamics and controls. New York: John Wiley & Sons
119. A. Messac (1996) Physical programming: Effective optimization for computational design. AIAA Journal 34(1), 149-158.
120. A. Messac and C.A. Mattson (2002) Generating well-distributed sets of pareto points for engineering design using physical programming. Optimization and Engineering 3 431-450.
121. A. Messac, C. Puemi-Sukam and E. Melachrinoudis (2000) Aggregate objective functions and pareto frontiers: Required relationships and practical implications. Optimization and Engineering 1 171-188.
122. A. Messac, C. Puemi-Sukam and E. Melachrinoudis (2001) Mathematical and pragmatic perspectives of physical programming. AIAA Journal 39(5), 885-893.
123. A. Messac, G.J. Sundararaj, R.V. Tappeta and J.E. Renaud (2000) Ability of objective functions to generate points on nonconvex pareto frontiers. AIAA Journal 38(6), 1084-1091.
124. M. Mitchell (1996) An introduction to genetic algorithms. Cambridge, MA: MIT Press
125. T. Murata, H. Ishibuchi and H. Tanaka (1996) Multiobjective genetic algorithm and its applications to flowshop scheduling. Computers and Industrial Engineering 30 957-968.
126. NAG (1984) FORTRAN library manual. Downers Grove, IL: Numerical Algorithms Group
127. S. Narayana and S. Azarm (1999) On improving multiobjective genetic algorithms for design optimization. Structural Optimization 18 146-155.
128. J.A. Neider and R.A. Mead (1965) A simplex method for function minimization. Computer Journal 7 308-313.
129. J. Nocedal and S.J. Wright (2000) Numerical optimization. New York: Springer-Verlag
130. R.L. Norton (2000) Machine design: An integrated approach. 2nd ed. (Eds) Upper Saddle River, NJ: Prentice-Hall
131. M.O.M. Osman, S. Sankar and R.V. Dukkipati (1978) Design synthesis of a multi-speed machine tool gear transmission using multiparameter optimization. Journal of Mechanical Design, Transactions of ASME 100 303-310.
132. A. Osyczka (2002) Evolutionary algorithms for single and multicriteria design optimization. Berlin, Germany: Physica Verlag
133. P.M. Pardalos and J.B. Rosen (1987) Constrained global optimization: Algorithms and applications. G. Goos, J. Hartmanis (Eds) Lecture Notes in Computer Science New York: Springer-Verlag
134. P.M. Pardalos, A. Migdalas and R. Burkard (2002) Combinatorial and global optimization, Series on Applied Mathematics Vol. 14 River Edge, NJ: World Scientific Publishing
135. P.M. Pardalos, H.E. Romeijn and H. Tuy (2000) Recent developments and trends in global optimization. Journal of Computational and Applied Mathematics 124 209-228.
136. V. Pareto (1971) Manuale di economica politica, societa editrice libraria. A.S. Schwier, A.N. Page, A.M. Kelley (Eds) New York: Augustus M. Kelley Publishers Original work published 1906
137. D.R. Pederson, R.A. Brand, C. Cheng and J.S. Arora (1987) Direct comparison of muscle force predictions using linear and nonlinear programming. Journal of Biomechanical Engineering, Transactions of the ASME 709(3), 192-199.
138. S. Pezeshk and C.V. Camp (2002) State-of-the-art on use of genetic algorithms in design of steel structures. S. Burns (Eds) Recent advances in optimal structural design Reston, VA: Structural Engineering Institute, ASCE
139. W.L. Price (1987) Global optimization algorithms for a CAD workstation. Journal of Optimization Theory and Applications 55 133-146.
140. B.N. Pshenichny and Y.M. Danilin (1982) Numerical methods in extremal problems. 2nd ed. (Eds) Moscow: Mir Publishers
141. A. Ravindran and H. Lee (1981) Computer experiments on quadratic programming algorithms. European Journal of Operations Research 8(2), 166-174.
142. G.V. Reklaitis, A. Ravindran and K.M. Ragsdell (1983) Engineering optimization: Methods and applications. New York: John Wiley & Sons
143. A.H.G. Rinnooy and G.T. Timmer (1987) Stochastic global optimization methods. Part I: Clustering methods. Mathematical Programming 39 27-56.
144. A.H.G. Rinnooy and G.T. Timmer (1987) Stochastic global optimization methods. Part II: Multilevel methods. Mathematical Programming 39 57-78.
145. R.W.H. Sargeant (1974) Reduced-gradient and projection methods for nonlinear programming. P.E. Gill, W. Murray (Eds) Numerical methods for constrained optimization New York: Academic Press 149-174.
146. J.D. Schaffer (1985) Multiple objective optimization with vector evaluated GENETIC algorithms. The Eirst International Conference on Genetic Algorithms and Their Applications (Pittsburgh, PA) Hillsdale, NJ: Lawrence Erlbaum Associates 93-100.
147. K. Schittkowski (1981) The nonlinear programming method of Wilson, Han and Powell with an augmented Lagrangian type line search function, Part 1: Convergence analysis, Part 2: An efficient implementation with linear least squares subproblems. Numerische Mathematik 38 83-127.
148. K. Schittkowski (1987) More test examples for nonlinear programming codes. New York: Springer-Verlag
149. L.A. Schmit (1960) Structural design by systematic synthesis. Proceedings of the Second ASCE Conference on Electronic Computations (Pittsburgh, PA) Reston, VA: American Society of Civil Engineers 105-122.
150. L. Schrage (1981) User's manual for UNDO. Palo Alto, CA: The Scientific Press
151. L. Schrage (1991) UNDO: Text and software. Palo Alto, CA: The Scientific Press
152. A. Schrijver (1986) Theory of linear and integer programming. New York: John Wiley & Sons
153. J.E. Shigley (1977) Mechanical engineering design. New York: McGraw-Hill
154. J.E. Shigley and C.R. Mischke (2001) Mechanical engineering design. 6th ed. (Eds) New York: McGraw-Hill
155. J.N. Siddall (1972) Analytical decision-making in engineering design. Englewood Cliffs, NJ: Prentice Hall
156. M.F. Spotts (1953) Design of machine elements. 2nd ed. (Eds) Englewood Cliffs, NJ: Prentice Hall
157. N. Srinivas and K. Deb (1995) Multiobjective optimization using nondominated sorting in general algorithms. Evolutionary Computations 2 221-248.
158. W. Stadler (1977) Natural structural shapes of shallow arches. Journal of Applied Mechanics 44 291-298.
159. W. Stadler (1988) Fundamentals of multicriteria optimization. W. Stadler (Eds) Multicriteria optimization in engineering and in the sciences New York: Plenum Press 1-25.
160. W. Stadler (1995) Caveats and boons of multicriteria optimization. Microcomputers in Civil Engineering 10 291-299.
161. W. Stadler and J.P. Dauer (1992) Multicriteria optimization in engineering: A tutorial and Survey. M.P. Kamat (Eds) Structural optimization: Status and promise Washington, D.C.: American Institute of Aeronautics and Astronautics 211-249.
162. G. Stewart (1973) Introduction to matrix computations. New York: Academic Press
163. G. Strang (1976) Linear algebra and its applications. New York: Academic Press
164. M.M. Syslo, N. Deo and J.S. Kowalik (1983) Discrete optimization algorithms. Englewood Cliffs, NJ: Prentice-Hall
165. P.B. Thanedar, J.S. Arora and C.H. Tseng (1986) A hybrid optimization method and its role in computer aided design. Computers and Structures 23(3), 305-314.
166. P.B. Thanedar, J.S. Arora, C.H. Tseng, O.K. Lim and G.J. Park (1987) Performance of some SQP algorithms on structural design problems. International Journal for Numerical Methods in Engineering 23(12), 2187-2203.
167. A. Torn and A. Zilinskas (1989) Global optimization. G. Goos, J. Hartmanis (Eds) Lecture Notes in Computer Science New York: Springer-Verlag
168. C.H. Tseng and J.S. Arora (1987) Optimal design for dynamics and control using a sequential quadratic programming algorithm. Technical report No. ODL-87.10 Iowa City: Optimal Design Laboratory, College of Engineering, The University of Iowa
169. C.H. Tseng and J.S. Arora (1988) On implementation of computational algorithms for optimal design 1: Preliminary investigation; 2: Extensive numerical investigation. International Journal for Numerical Methods in Engineering 26(6), 1365-1402.
170. A.M. Wahl (1963) Mechanical springs. 2nd ed. (Eds) New York: McGraw-Hill
171. G.W. Walster, E.R. Hansen, S. Sengupta (1984) Test results for a global optimization algorithm. T. Boggs, et al., (Eds) Numerical optimization Philadelphia: SIAM 280-283.
172. R.B. Wilson (1963) A simplical algorithm for concave programming. Doctoral Dissertation Boston, MA: Graduate School of Business Administration, Harvard University
173. P. Wolfe (1959) The simplex method for quadratic programming. Econometica 27(3), 382-398.
174. C.S. Zhou and T.L. Chen (1997) Chaotic annealing and optimization. Physical Review E 55(3), 2580-2587.
175. AASHTO (1992) Standard specifications for highway bridges. 15th ed. (Eds) Washington, D.C.: American Association of State Highway and Transportation Officials
176. R.L. Ackoff and M.W. Sasieni (1968) Fundamentals of operations research. New York: John Wiley & Sons
177. M. Aoki (1971) Introduction to optimization techniques. New York: Macmillan
178. J.S. Arora (1990) Computational design optimization: A review and future directions. Structural Safety 7 131-148.
179. J.S. Arora (1990) Global optimization methods for engineering design. Proceedings of the 31st AlAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Long Beach, CA 123-135.
180. J.S. Arora and G. Baenziger (1986) Uses of artificial intelligence in design optimization. Computer Methods in Applied Mechanics and Engineering 54 303-323.
181. J.S. Arora and G. Baenziger (1987) A nonlinear optimization expert system. D.R. Jenkins (Eds) Proceedings of the ASCE Structures Congress1 87, Computer Applications in Structural Engineering 113-125.
182. ASTM (1980) Standard metric practice, No. E380-79. Philadelphia: American Society for Testing and Material
183. A.D. Belegundu and T.R. Chandrupatla (1999) Optimization concepts and applications in engineering. Upper Saddle River, NJ: Prentice Hall
184. D.P. Bertsekas (1995) Nonlinear programming. Belmont, MA: Athena Scientific
185. M.A. Bhatti (2000) Practical optimization methods with Mathematica applications. New York: Springer Telos
186. A. Cauchy (1847) Method generale pour la resolution des systemes d'equations simultanees. Comptes Rendus, de Academie Scientifique 25 536-538.
187. K.P. Chong and S.H. Zak (2001) An introduction to optimization. 2nd ed. (Eds) New York: John Wiley & Sons
188. S. Dano (1974) Linear programming in industry. 4th ed. (Eds) New York: Springer-Verlag
189. G.B. Dantzig and M.N. Thapa (1997) Linear programming, I: Introduction. New York: Springer-Verlag
190. H.J. Day and F. Dolbear (1965) Regional water quality management. Proceedings of the 1st Annual Meeting of the American Water Resources Association Chicago: University of Chicago 283-309.
191. R.A. Deininger (1975) Water quality management—The planning of economically optimal pollution control systems. Proceedings of the 1st Annual Meeting of the American Water Resources Association Chicago: University of Chicago 254-282.
192. D. Drew (1968) Traffic flow theory and control. New York: McGraw-Hill
193. S.C. Fang and S. Puthenpura (1993) Linear optimization and extensions'. Theory and algorithms. Englewood Cliffs, NJ: Prentice-Hall
194. P.E. Gill, W. Murray, M.A. Saunders and M.H. Wright (1984) User's guide for QPSOL: Version 3.2. Stanford, CA: Systems Optimization Laboratory, Department of Operations Research, Stanford University
195. G. Hadley (1961) Linear programming. Reading, MA: Addison-Wesley
196. R.T. Haftka and Z. Gurdal (1992) Elements of structural optimization. Norwell, MA: Kluwer Academic Publishers
197. R.T. Haftka and M.P. Kamat (1985) Elements of structural optimization. Dordrecht, Holland: Martinus Nijhoff
198. W. Hock and K. Schittkowski (1983) A comparative performance evaluation of 27 nonlinear programming codes. Computing 30 335-358.
199. B. Hyman (2003) Fundamental of engineering design. 2nd ed. (Eds) Upper Saddle River, NJ: Prentice Hall
200. A. Jennings (1977) Matrix computations for engineers. New York: John Wiley & Sons
201. U. Kirsch (1981) Optimum structural design. New York: McGraw-Hill
202. U. Kirsch (1993) Structural optimization. New York: Springer-Verlag
203. W.R. Lynn (1964) State development of wastewater treatment works. Journal of Water Pollution Control Federation 722-751.
204. W. Math Works (2001) Optimization toolbox for use with MATLAB, User's Guide, Ver. 2. Natick, MA: The Math Works, Inc.
205. N. Metropolis, A.W. Rosenbluth, M.N. Rosenbluth, A.H. Teller and E. Teller (1953) Equations of state calculations by fast computing machines. Journal of Chemical Physics 21 1087-1092.
206. Microsoft EXCEL, Version 11.0, Redmond, WA: Microsoft Corporation.
207. M. Minoux (1986) Mathematical programming theory and algorithms. New York: John Wiley & Sons
208. J.J. More and S.J. Wright (1993) Optimization software guide. Philadelphia: Society for Industrial and Applied Mathematics
209. S.G. Nash and A. Sofer (1996) Linear and nonlinear programming. New York: McGraw-Hill
210. G.L. Nemhauser and S.J. Wolsey (1988) Integer and combinatorial optimization. New York: John Wiley & Sons
211. C. Onwubiko (2000) Introduction to engineering design optimization. Upper Saddle River, NJ: Prentice Hall
212. P.Y. Papalambros and D.J. Wilde (2000) Principles of optimal design: Modeling and computation. 2nd ed. (Eds) New York: Cambridge University Press
213. M.J.D. Powell (1978) A fast algorithm for nonlinearly constrained optimization calculations. G.A. Watson, et al., (Eds) Lecture Notes in Mathematics Berlin: Springer-Verlag
214. M.J.D. Powell (1978) Numerical Analysis. G.A. Watson, et al., (Eds) Proceedings of the Biennial Conference held at Dundee, June 1977
215. M.J.D. Powell (1978) The convergence of variable metric methods for nonlinearity constrained optimization calculations. O.L. Mangasarian, R.R. Meyer, S.M. Robinson (Eds) Nonlinear Programming 3 New York: Academic Press
216. M.J.D. Powell (1978) Algorithms for nonlinear functions that use Lagrange functions. Mathematical Programming 14 224-248.
217. B.N. Pshenichny (1978) Algorithms for the general problem of mathematical programming. Kibernetica 5 120-125.
218. P.H. Randolph and H.D. Meeks (1978) Applied linear optimization. Columbus OH: GRID, Inc.
219. R.J. Roark and W.C. Young (1975) Formulas for stress and strain. 5th ed. (Eds) New York: McGraw-Hill
220. J.B. Rosen (1961) The gradient projection method for nonlinear programming. Journal of the Society for Industrial and Applied Mathematics 9 514-532.
221. M.F. Rubinstein and J. Karagozian (1966) Building design under linear programming. Proceedings ASCE, 92 223-245. ST6
222. H.M. Salkin (1975) Integer programming. Reading, MA: Addison-Wesley
223. M. Sasieni, A. Yaspan and L. Friedman (1960) Operations-methods and problems. New York: John Wiley & Sons
224. L.F. Shampine and M.K. Gordon (1975) Computer simulation of ordinary differential equations: The initial value problem. San Francisco: W. H. Freeman
225. R.M. Stark and R.L. Nicholls (1972) Mathematical foundations for design: Civil engineering systems. New York: McGraw-Hill
226. W.F. Stoecker (1971) Design of thermal systems. New York: McGraw-Hill
227. P.F. Sun, J.S. Arora and E.J. Haug (1975) Fail-safe optimal design of structures. Technical Report No. 19. Iowa City: Department of Civil and Environmental Engineering, The University of Iowa
228. G.N. Vanderplaats (1984) Numerical optimization techniques for engineering design with applications. New York: McGraw-Hill
229. G.N. Vanderplaats and N. Yoshida (1985) Efficient calculation of optimum design sensitivity. A1AA Journal 25(11), 1798-1803.
230. P. Venkataraman (2002) Applied optimization with MATLAB programming. New York: John Wiley & Sons
231. M. Wohl and B.V. Martin (1967) Traffic systems analysis. New York: McGraw-Hill
232. N. Wu and R. Coppins (1981) Linear programming and extensions. New York: McGraw-Hill
233. G. Zoutendijk (1960) Methods of feasible directions. Amsterdam: Elsevier