Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials

Journal of Prosthetic Dentistry

Volumn 98, Issue 5, 2007, Pages 379-388

  Aboushelib, Moustafa N ^a   Kleverlaan, Cornelis J ^a   Feilzer, Albert J ^a  

^a VU UNIVERSITY AMSTERDAM   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMEDICAL AND DENTAL MATERIALS; RESIN CEMENT; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; CHEMISTRY; DENTAL BONDING; EVALUATION; METHODOLOGY; SURFACE PROPERTY; TENSILE STRENGTH; TIME;

DENTAL BONDING; DENTAL MATERIALS; RESIN CEMENTS; SURFACE PROPERTIES; TENSILE STRENGTH; TIME FACTORS; ZIRCONIUM;

EID: 36049040304     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(07)60123-1     Document Type: Article

References (32)

1. Aboushelib M., Kleverlaan C., and Feilzer A. Microtensile bond strength of different components of core veneered all-ceramic restorations: Part II: Zirconia veneering ceramics. Dent Mater 22 (2006) 857-863
2. Derand P., and Derand T. Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont 13 (2000) 131-135
3. Komine F., and Tomic M. A single-retainer zirconium dioxide ceramic resin-bonded fixed partial denture for single tooth replacement: a clinical report. J Oral Sci 47 (2005) 139-142
4. Djemal S., Setchell D., King P., and Wickens J. Long-term survival characteristics of 832 resin-retained bridges and splints provided in a post-graduate teaching hospital between 1978 and 1993. J Oral Rehabil 26 (1999) 302-320
5. Blatz M., Sadan A., and Kern M. Resin-ceramic bonding: A review of the literature. J Prosthet Dent 89 (2003) 268-274
6. Amaral R., Ozcan M., Bottino M., and Valandro L. Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning. Dent Mater 22 (2006) 283-290
7. Bottino M., Valandro L., Scotti R., and Buso L. Effect of surface treatments on the resin bond to zirconium-based ceramic. Int J Prosthodont 18 (2005) 60-65
8. Janda R., Roulet J., Wulf M., and Tiller H. A new adhesive technology for all-ceramics. Dent Mater 19 (2003) 567-573
9. Denry I., and Holloway J. Microstructural and crystallographic surface changes after grinding zirconia-based dental ceramics. J Biomed Mater Res B Appl Biomater 76 (2006) 440-448
10. Wegner S., Gerdes W., and Kern M. Effect of different artificial aging conditions on ceramic-composite bond strength. Int J Prosthodont 15 (2002) 267-272
11. Luthy H., Loeffel O., and Hammerle C. Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent Mater 22 (2006) 95-200
12. Wegner S., and Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2 (2000) 139-147
13. Kilicarslan M., Kedici P., Kucukesmen H., and Uludag B. In vitro fracture resistance of posterior metal-ceramic and all-ceramic inlay-retained resin-bonded fixed partial dentures. J Prosthet Dent 92 (2004) 365-370
14. Piwowarczyk A., Lauer H., and Sorensen J. The shear bond strength between luting cements and zirconia ceramics after two pre-treatments. Oper Dent 30 (2005) 382-388
15. Kern M., and Thompson V. Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J Prosthet Dent 73 (1995) 240-249
16. Kern M., and Wegner S. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 14 (1998) 64-71
17. Isidor F., Stokholm R., and Ravnholt G. Tensile bond strength of resin luting cement to glass infiltrated porous aluminum oxide cores (In-Ceram). Eur J Prosthodont Restor Dent 3 (1995) 199-202
18. Atsu S., Kilicarslan M., Kucukesmen H., and Aka P. Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J Prosthet Dent 95 (2006) 430-436
19. Piconi C., and Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 20 (1999) 1-25
20. Chevalier J., Deville S., Munch E., Jullian R., and Lair F. Critical effect of cubic phase on aging in 3mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis. Biomaterials 25 (2004) 5539-5545
21. Aboushelib M., de Jager N., Kleverlaan C., and Feilzer A. Microtensile bond strength of different components of core veneered all-ceramic restorations. Dent Mater 21 (2005) 984-991
22. Lankford J., Page R., and Rabenberg L. Deformation mechanisms in yttria-stabilized zirconia. J Mater Sci 23 (1988) 4144-4156
23. Deville S., Chevalier J., and El Attaoui H. Atomic force microscopy study and qualitative analysis of martensite relief in zirconia. J Am Ceram Soc 88 (2005) 1261-1267
24. 3 composites. J Am Ceram Soc 88 (2005) 1273-1280
25. Gutierrez-Mora F., Gomez-Garcia D., Jimenez-Melendo M., Donminguez-Rodrigues A., and Chaim R. Experimental assessment of plasticity of nanocrystalline 1.7 mol% yttria tetragonal zirconia polycrystals. J Am Ceram Soc 88 (2005) 1529-1535
26. Sasaki K., Nakano M., Mimurada J., Ikuhara Y., and Sakuma T. Strain hardening in superplastic codoped yttria-stabilized tetragonal-zirconia polycrystals. J Am Ceram Soc 84 (2001) 2981-2986
27. Nakamora A., Shibata N., Morishige N., Mastsunaga K., Ikuhara Y., and Yamamoto T. Direct evidence of dopant-enhanced grain-boundary sliding in yttria-stabilized zirconia bicrystals. J Am Ceram Soc 88 (2005) 938-942
28. 3: Defect mechanism and dopant effects. J Am Ceram Soc 79 (1996) 1801-1809
29. Bak T., Nowotny J., Prince K., Rekas M., and Sorrell C. Grain boundary diffusion of magnesium in zirconia. J Am Ceram Soc 85 (2002) 2244-2250
30. Aboushelib M, Feilzer A: New surface treatment for zirconia based materials. European patent application No 050773969;2006.
31. Giordano II R., Pelletier L., Campbell S., and Pober R. Flexural strength of an infused ceramic, glass ceramic, and feldspathic porcelain. J Prosthet Dent 73 (1995) 411-418
32. El Zohairy A., De Gee A., Mohsen M., and Feilzer A. Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks. Dent Mater 19 (2003) 575-583