Texture evolution in equal-channel angular extrusion

Progress in Materials Science

Volumn 54, Issue 4, 2009, Pages 427-510

  Beyerlein, Irene J ^a   Tóth, László S ^b  

^a LOS ALAMOS NATIONAL LABORATORY   (United States)

^b UNIVERSITÉ DE LORRAINE   (France)

Author keywords

[No Author keywords available]

Indexed keywords

CRYSTAL STRUCTURE; DEFORMATION; DYNAMIC RECRYSTALLIZATION; EQUAL CHANNEL ANGULAR PRESSING; GRAIN REFINEMENT; GRAIN SIZE AND SHAPE; METAL EXTRUSION; METAL REFINING; PLASTICS; PRESSING (FORMING); STRAIN;

ACCUMULATED STRAINS; APPLIED STRAINS; DEFORMATION TWINNINGS; DEFORMED METALS; DIE GEOMETRIES; ECAE PROCESS; EQUAL-CHANNEL ANGULAR EXTRUSIONS; EQUAL-CHANNEL-ANGULAR PRESSINGS; GRAIN SIZES; INHOMOGENEITIES; INITIAL TEXTURES; LENGTH SCALE; MECHANICAL RESPONSE; NANO SIZES; PLASTIC ANISOTROPIES; PLASTIC BEHAVIORS; PLASTIC STRAINS; POLYCRYSTALLINE METALS; PROCESSING CONDITIONS; SEVERE PLASTIC DEFORMATIONS; SUB MICRONS; TEXTURE ANALYSIS; TEXTURE DEVELOPMENT; TEXTURE EVOLUTIONS;

TEXTURES;

EID: 63549120840     PISSN: 00796425     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.pmatsci.2009.01.001     Document Type: Review

References (271)

1. Alexander D.J., and Beyerlein I.J. Anisotropy in mechanical properties of high-purity copper processed by equal channel angular extrusion. Mater Sci Engng A 410-411 (2005) 480-484
2. Han B.Q., Lavernia E.J., and Mohamed F.A. Mechanical properties of iron processed by severe plastic deformation. Metall Mater Trans A34 (2003) 71-83
3. Beyerlein I.J., Alexander D.J., and Tomé C.N. Plastic anisotropy in aluminum and copper pre-strained by equal channel angular extrusion. J Mater Sci 42 (2007) 1733-1750
4. Yapici G.G., Beyerlein I.J., Karaman I., and Tomé C.N. Tension-compression asymmetry in severely deformed pure copper. Acta Mater 55 (2007) 4603-4613
5. Yapici GG, Beyerlein IJ, Karaman I, Tomé CN, Vogel S, Liu C. Plastic anisotropy of pure zirconium after severe deformation at room temperature. Acta Mater, submitted for publication.
6. Li S., Beyerlein I.J., and Bourke M.A.M. Texture formation during equal channel angular extrusion of fcc and bcc materials: comparison with simple shear. Mater Sci Engng A394 (2005) 66-77
7. Suwas S., Tóth L.S., Fundenberger J.-J., Eberhardt A., and Skrotzki W. Evolution of crystallographic texture during equal channel angular extrusion of silver. Scr Mater 49 (2003) 1203-1208
8. Kaschner G.C., Tomé C.N., Beyerlein I.J., Vogel S.C., Brown D.W., and McCabe R.J. Role of twinning in the hardening response of zirconium during temperature reloads. Acta Mater 54 (2006) 2887-2896
9. Kawasaki M., Beyerlein I.J., Vogel S.C., and Langdon T.G. Characterization of creep textures in pure Al processed by equal-channel angular pressing. Acta Mater 56 (2008) 2307-2317
10. Segal V.M. Materials processing by simple shear. Mater Sci Engng A197 (1995) 157-164
11. Segal V.M. Equal channel angular extrusion: from macromechanics to structure formation. Mater Sci Engng A271 (1999) 322-333
12. Segal VM. Methods of stress-strain analysis in metalforming Minsk, Sc.D. thesis; 1974 [in Russian].
13. Valiev R.Z. Structure and mechanical properties of ultrafine-grained metals. Mater Sci Engng A 234-236 (1997) 59-66
14. Valiev R.Z., Gunderov D.V., Zhilyaev A.P., Popov A.G., and Pushin V.G. Nanocrystallization induced by severe plastic deformation of amorphous alloys. J Metastable Nanocryst Mater 22 (2004) 21-26
15. Valiev R.Z., and Langdon T.G. Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog Mater Sci 51 (2006) 881-981
16. Segal V.M., Reznikov V.I., Drobyshevski A.E., and Kopylov V.I. Plastic working of metals by simple shear. Russ Metall 1 (1981) 99-105
17. Fang D.R., Zhang Z.F., Wu S.D., Huang C.X., Zhang H., Li J.J., et al. Effect of equal channel angular pressing on tensile properties and fracture modes of casting Al-Cu alloys. Mater Sci Engng A426 (2006) 305-313
18. Han W.Z., Zhang Z.F., Wu S.D., Li S.X., and Wang Y.D. Anisotropic compressive properties of iron subjected to single-pass equal-channel angular pressing. Philos Mag Lett 86 (2006) 435-441
19. Han W.Z., Zhang Z.F., Wu S.D., and Li S.X. Nature of shear flow lines in equal-channel angular-pressed metals and alloys. Philos Mag Lett 87 (2007) 735-741
20. Kamachi M., Furukawa M., Horita Z., and Langdon T.G. A model investigation of the shearing characteristics in equal-channel angular pressing. Mater Sci Engng A347 (2003) 223-230
21. Shan A.D., Moon I.G., Ko H.S., and Park J.W. Direct observation of shear deformation during equal channel angular pressing of pure aluminium. Scr Mater 41 (1999) 353-357
22. Beyerlein I.J., Li S., Necker C.T., Alexander D.J., and Tomé C.N. Non-uniform microstructure and texture evolution during equal channel angular extrusion. Philos Mag 85 (2005) 1359-1394
23. Li S., Beyerlein I.J., and Necker C.T. On the development of microstructure and texture heterogeneity in ECAE via route C. Acta Mater 54 (2006) 1397-1408
24. Shin D.H., Kim I., Kim J., Kim Y.S., and Semiatin S.L. Microstructure development during equal-channel angular pressing of titanium. Acta Mater 51 (2003) 983-996
25. De Messemaeker J., Verlinden B., and Van Humbeeck J. Texture of IF steel after equal channel angular pressing (ECAP). Acta Mater 53 15 (2005) 4245-4257
26. Tóth L.S. Texture evolution in severe plastic deformation by equal channel angular extrusion. Adv Engng Mater 5 (2003) 308-316
27. Beyerlein I.J., Lebensohn R.A., and Tomé C.N. Modeling texture and microstructural evolution in the equal channel angular extrusion process. Mater Sci Engng A 345 (2003) 122-138
28. Beyerlein I.J., and Tomé C.N. Analytical modeling of material flow in equal channel angular extrusion (ECAE). Mater Sci Engng A380 (2004) 171-190
29. Suwas S., Arruffat-Massion R., Tóth L.S., Fundenberger J.-J., Eberhardt A., and Skrotzki W. Evolution of crystallographic texture during equal channel angular extrusion of copper: The role of material variables. Metall Mater Trans A 37A 3 (2006) 739-753
30. Arruffat-Massion R., Tóth L.S., and Mathieu J.-P. Modeling of deformation and texture development of copper in a 120° ECA die. Scr Mater 54 (2006) 1667-1672
31. Li S., Gazder A.A., Beyerlein I.J., Davies C.H.J., and Pereloma E.V. Microstructure and texture evolution during equal channel angular extrusion of interstitial-free steel: Effects of die angle and processing route. Acta Mater 55 (2007) 1017-1032
32. Li S., Gazder A., Beyerlein I.J., Pereloma E.V., and Davies C.H.J. Effect of processing route on microstructure and texture development in equal channel angular extrusion of interstitial-free steel. Acta Mater 54 (2006) 1087-1100
33. Li S., Beyerlein I.J., Necker C.T., Alexander D.J., and Bourke M.A.M. Heterogeneity of deformation texture in equal channel angular extrusion of copper. Acta Mater 52 16 (2004) 4859-4875
34. Tóth L.S., Jonas J.J., Daniel D., and Ray R.K. Development of ferrite rolling textures in low and extra low carbon steels. Metall Trans 21A (1990) 2985-3000
35. Tóth L.S., Neale K.W., and Jonas J.J. Stress response and persistence characteristics of the ideal orientations of shear textures. Acta Metall 37 (1989) 2197-2210
36. Saito Y., Utsunomiya H., Suzuki H., and Sakai A. Improvement in the r-value of aluminum strip by a continuous shear deformation process. Scr Mater 42 (2000) 1139-1144
37. Utsunomiya H., Hatsuda K., Sakai T., and Saito Y. Continuous grain refinement of aluminum strip by conshearing. Mater Sci Engng A 372 (2004) 199-206
38. Okamura Y., Utsunomiya H., Sakai T., and Saito Y. Texture and microstructure of ultra-low carbon IF steel strip processed by conshearing. J Iron Steel Int Japan 89 (2003) 666-672
39. 3Al. Acta Metal Mater 41 (1993) 2953-2962
40. Bridgman P.W. On torsion combined with compression. J Appl Phys 14 (1943) 273-283
41. Jiang H.G., Zhu Y.T., Butt D.P., Alexandrov I.V., and Lowe T.C. Microstructural evolution, microhardness and thermal stability of HPT-processed Cu. Mater Sci Engng A 290 (2000) 128-138
42. Alexandrov I.V., Dubravina A.A., Kilmametov A.R., Kazykhanov V.U., and Valiev R.Z. Textures in nanostructured metals processed by severe plastic deformation. Metals Mater Int 9 (2003) 151-156
43. Stolyarov V.V., Zhu Y.T., Lowe T.C., Islamgaliev R.K., and Valiev R.Z. Processing nanocrystalline Ti and its nanocomposites from micrometer-sized Ti powder using high pressure torsion. Mater Sci Engng A 282 (2000) 78-85
44. Zhilyaev A.P., McNelley T.R., and Langdon T.G. Evolution of microstructure and microtexture in fcc metals during high-pressure torsion. J Mater Sci 42 (2007) 1517-1528
45. Tóth LS, Arzaghi M, Fundenberger JJ, Beausir B, Bouaziz O, Arruffat-Massion R. Severe plastic deformation of metals by high pressure tube twisting. Scr Mater. doi: 10.1016/j.scriptamat.2008.09.029.
46. Skrotzki W, Hünsche I, Hüttenrauch J, Oertel C-G, Brokmeier H-G, Höppel H-W. et al. Texture and mechanical anisotropy of ultrafine-grained aluminium alloy AA6016 produced by accumulative roll bonding. Texture Stress Microstruct 2008; 2008. doi:10.1155/2008/328754.
47. Tsuji N., Ueji R., and Minamino Y. Nanoscale crystallographic analysis of ultrafine grained IF steel fabricated by ARB process. Scr Mater 47 (2002) 69-76
48. Kamikawa N., Tsuji N., and Minamino Y. Microstructure and texture through thickness of ultralow carbon IF steel sheet severely deformed by accumulative roll-bonding. Sci Technol Adv Mater 5 (2004) 163-172
49. Perez-Prado M.T., del Valle J.A., and Ruano O.A. Grain refinement of Mg-Al-Zn alloys via accumulative roll bonding. Scr Mater 51 (2004) 1093-1097
50. Kim H.W., Kang S.B., Xing Z.P., Tsuji N., and Minamino Y. Texture properties of AA8011 aluminum alloy sheet manufactured by the accumulative roll bonding process (ARB). Textures Mater Mater Sci Forum 408-4 (2002) 727-732
51. Heason C.P., and Prangnell P.B. Texture evolution and grain refinement in Al deformed to ultra-high strains by accumulative roll bonding (ARB). Textures Mater Mater Sci Forum 408-4 (2002) 733-738
52. Kamikawa N., Tsuji N., Huang X.X., and Hansen N. Quantification of annealed microstructures in ARB processed aluminum. Acta Mater 54 (2006) 3055-3066
53. Chowdhury S.G., Dutta A., Ravikumar B., and Kumar A. Textural evolution during accumulative roll bonding of an Al-Li alloy. Mater Sci Engng A428 (2006) 351-357
54. Kim H.W., Kang S.B., Tsuji N., and Minamino Y. Deformation textures of AA8011 aluminum alloy sheets severely deformed by accumulative roll bonding. Metall Mater Trans 36A (2005) 3151-3163
55. Jiang L., Perez-Prado M.T., Gruber P.A., Arzt E., Ruano O.A., and Kassner M.E. Texture, microstructure and mechanical properties of equiaxed ultrafine-grained Zr fabricated by accumulative roll bonding. Acta Mater 56 (2008) 1228-1242
56. Canova G.R., Kocks U.F., and Jonas J.J. Theory of torsion texture development. Acta Metall 32 (1984) 211-226
57. Tóth L.S., Gilormini P., and Jonas J.J. Effect of rate sensitivity on the stability of torsion textures. Acta Metall 36 (1988) 3077-3091
58. Montheillet F., Cohen M., and Jonas J.J. Axial stresses and texture development during the torsion testing of Al, Cu and alpha-Fe. Acta Metall 32 (1984) 2077-2089
59. Baczynski J., and Jonas J.J. Texture development during the torsion testing of alpha-iron and two IF steels. Acta Metall 44 (1996) 4273-4288
60. Beausir B., Tóth L.S., and Neale K.W. Ideal orientations and persistence characteristics of hexagonal close packed crystals in simple shear. Acta Mater 55 (2007) 2695-2705
61. Kocks U.F., Tome C.N., and Wenk H.R. Texture and anisotropy (1998), Cambridge University Press
62. Randle V., and Engler O. Introduction to texture analysis: macrotexture, microtexture and orientation mapping (2000), CRC Press
63. Li S., and Beyerlein I.J. Modelling texture evolution in equal channel angular extrusion of bcc materials: effects of processing route and initial texture. Model Simul Mater Sci Engng 13 (2005) 509-530
64. Beausir B., Suwas S., Tóth L.S., Neale K.W., and Fundenberger J.-J. Analysis of texture evolution in magnesium during equal channel angular extrusion. Acta Mater 56 (2008) 200-214
65. Li S., Beyerlein I.J., Alexander D.J., and Vogel S.C. Texture evolution during multi-pass equal channel angular extrusion of copper: neutron diffraction characterization and polycrystal modeling. Acta Mater 53 (2005) 2111-2125
66. Ferrasse S., Segal V.M., Kalidindi S.R., and Alford F. Texture evolution during equal channel angular extrusion Part I. Effect of route, number of passes and initial texture. Mater Sci Engng A368 (2004) 28-40
67. Li S., Beyerlein I.J., and Alexander D.J. Characterization of deformation textures in pure copper processed by equal channel angular extrusion via route A. Mater Sci Engng A431 (2006) 339-345
68. Furuno K., Akamatsu H., Oh-ishi K., Furukawa M., Horita Z., and Langdon T.G. Microstructural development in equal-channel angular pressing using a 60 degrees die. Acta Mater 52 (2004) 2497-2507
69. Nakashima K., Horita Z., Nemoto M., and Langdon T.G. Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing. Acta Mater 46 (1998) 1589-1599
70. Li S, Alexander DJ, Beyerlein IJ, Brown DW. Texture evolution during multi-pass equal channel angular extrusion of beryllium. In: Proceedings of ICOTOM-15; 2008 [CD-ROM].
71. Vogel S.C., Alexander D.J., Beyerlein I.J., Bourke M.A.M., Brown D.W., Clausen B., et al. Investigation of texture in ECAP materials using neutron diffraction. Mater Sci Forum 426-432 (2003) 2661-2666
72. Suwas S., Tóth L.S., Arruffat Massion R., Fundenburger J.-J., Eberhardt A., and Skrotzki W. Evolution of texture in copper during equal channel angular extrusion - the role of material variables. Metall Mater Trans A 37 (2006) 739-753
73. Li S., Beyerlein I.J., Alexander D.J., and Vogel S.C. Texture evolution during equal channel angular extrusion: effect of initial texture from experiment and simulation. Scr Mater 52 (2005) 1099-1104
74. Tóth L.S., Arruffat-Massion R., Germain L., Baik S.C., and Suwas S. Analysis of texture evolution in equal channel angular extrusion of copper using a new flow field. Acta Mater 52 (2004) 1885-1898
75. Kopacz I, Zehetbauer M, Tóth LS, Alexandrov IV. Texture development and simulation in copper during route B - equal channel angular pressing. In: Dinesen AR et al., editors. Proceedings of the 22nd Riso international symposium on mechanical science: science of metastable and nanocrystalline alloys structure, properties and modelling, Roskilde, Denmark; September 2001.
76. Vogel S.C., Beyerlein I.J., Bourke M.A.M., Tomé C.N., Rangaswamy P., Xu C., et al. Texture in equal-channel angular pressed aluminum and nickel. Mater Sci Forum 408-412 (2002) 673-678
77. Gholinia A., Prangnell P.B., and Markushev M.V. The effect of strain path on the development of deformation structures in severely deformed Aluminium alloys processed by ECAE. Acta Mater 48 (2000) 1115-1130
78. Ferrasse S., Segal V.M., Hartwig K.T., and Goforth R.E. Microstructure and properties of copper and aluminum alloy 3003 heavily worked by equal channel angular extrusion. Metall Mater Trans 28 (1997) 1047-1057
79. Tidu A., Wagner F., Huang W.H., Kao P.W., Chang C.P., and Grosdidier T. X-ray characterisation of size, strain and texture inhomogeneities in ultra fine grained copper processed by equal channel angular extrusion. J Phys IV France 10 (2000) 211-217
80. Perlovich Y., Isaenkova M., Fesenko V., Grekhov M., Alexandrov I., and Beyerlein I.J. Formation of texture and structure in rods of copper and titanium under equal-channel angular pressing. Mater Sci Forum (NanoSPD3 Conf., Fukuoka, Japan, 2005 Sept) 503-504 (2006) 853-858
81. McNelley TR, Swisher DL. Deformation banding and grain refinement during ECAP of aluminum. In: Zhu YT, Langdon TG, Valiev RZ, Semiatin SL, Shin DH, Lowe TC, editors. Ultrafine grained materials III. TMS (The Minerals, Metals and Materials Society); 2004. p. 89-94.
82. Baik S.C., Estrin Y., Hellmig R.J., Jeong H.-T., Brokmeier H.-G., and Kim H.S. Plastic anisotropy in aluminum and copper pre-strained by equal channel angular extrusion. Z Metallkd 94 (2003) 1189-1198
83. Gibbs M.A., Hartwig K.T., Cornwell L.R., Goforth R.E., and Payzant E.A. Texture formation in bulk iron processed by simple shear. Scr Mater 39 (1998) 1699-1704
84. Isaenkova M., Perlovich Y., Fesenko V., Grekhov M., Alexandrov I., and Beyerlein I.J. Formation of inhomogeneous texture and structure in metal materials under equal-channel angular pressing. Mater Sci Forum (ICOTOM-14) 495-497 (2005) 827-832
85. Perlovich Y., Isaenkova M., Fesenko V., Grekhov M., Yu S.H., Hwang S.K., et al. Features of texture and structure development in zirconium under equal channel angular pressing. Mater Sci Forum 503-504 (2005) 859-864
86. Chakkingal U., and Thomson R.F. Development of microstructure and texture during high temperature equal channel angular extrusion of aluminium. J Mater Process Technol 117 (2001) 169-177
87. Mahesh S., Beyerlein I.J., and Tomé C.N. Loading- and substructure-induced irreversibility in texture during route C equal channel angular extrusion. Scr Mater 53 (2005) 965-969
88. Beyerlein I.J., Field R.D., Hartwig K.T., and Necker C.T. Texture development in two-pass ECAE-processed beryllium. J Mater Sci 43 (2008) 7465-7473
89. Skrotzki W., Scheerbaum N., Oertel C.-G., Arruffat-Massion R., Suwas S., and Tóth L.S. Microstructure and texture gradient in copper deformed by equal channel angular pressing. Acta Mater 55 (2007) 2013-2024
90. Beyerlein I.J., Li S., and Alexander D.J. Modeling the plastic anisotropy in pure copper after one pass of ECAE. Mater Sci Engng 410 (2005) 201-206
91. Cao W.Q., Godfrey A., and Liu Q. EBSP investigation of microstructure and texture evolution during equal channel angular pressing of aluminium. Mater Sci Engng A361 (2003) 9-14
92. Meyers M.A., and Chawla K.K. Mechanical metallurgy: principles and applications (1984), Prentice-Hall, Inc., Englewood Cliffs, NJ 07632
93. Hughes D.A., Lebensohn R.A., Wenk H.R., and Kumar A. Stacking fault energy and microstructure effects on torsion texture evolution. Proceedings of the royal society of London Series A 456 (1996) 921-953
94. Liao X.Z., Zhao Y.H., Srinivasan S.G., Zhu Y.T., Valiev R.Z., and Gunderov D.V. Deformation twinning in nanocrystalline copper at room temperature and low strain rate. Appl Phys Lett 84 (2004) 592-594
95. Beyerlein I.J., Tóth L.S., Tomé C.N., and Suwas S. Role of twinning on texture evolution of silver during equal channel angular extrusion. Philos Mag 87 (2007) 885-906
96. Huang C.X., Wang K., Wu S.D., Zhang Z.F., Li G.Y., and Li S.X. Deformation twinning in polycrystalline copper at room temperature and low strain rate. Acta Mater 54 (2006) 655-665
97. Manping L., Roven H.J., and Yingda Y. Deformation twins in ultrafine grained commercial aluminum. Int J Mater Res 98 (2007) 184-190
98. Yapici G.G., Karaman I., Luo Z.P., Maier H.J., and Chumlyakov Y.I. Microstructural refinement and deformation twinning during severe plastic deformation of 316L stainless steel at high temperatures. J Mater Res 19 (2004) 2268-2278
99. Huang C.X., Yang G., Deng B., Wu S.D., Li S.X., and Zhang Z.F. Formation mechanism of nanostructures in austenitic stainless steel during equal channel angular pressing. Philos Mag 87 (2007) 4949-4971
100. Miyamoto H., Erb U., Koyama T., Mimaki T., Vinogradov A., and Hashimoto S. Microstructure and texture development of copper single crystals deformed by equal-channel angular pressing. Philos Mag Lett 84 (2004) 235-243
101. Morii K., Mecking H., and Nakayama Y. Development of shear bands in FCC single-crystals. Acta Metall 33 (1985) 379-386
102. Sandim H.R.Z., Bernardi H.H., Verlinden B., and Raabe D. Equal channel angular extrusion of niobium single crystals. Mater Sci Engng A 467 (2007) 44-52
103. Wang G., Wu S.D., Zuo L., Esling C., Wang Z.G., and Li G.Y. Microstructure, texture, grain boundaries in recrystallization regions in pure Cu ECAE samples. Mater Sci Engng A346 (2003) 83-90
104. Wang G., Wu S.D., Jiang Q.W., Wang Y.D., Zong Y.P., Esling C., et al. Orientation evolution during equal angular channel extrusion of copper single crystal. Mater Sci Forum (ICOTOM-14) 495-497 (2005) 815-820
105. Braszczyńska-Malik K.N., and Froyen L. Microstructure of AZ91 alloy deformed by equal channel angular pressing. Z Metallkd 96 (2005) 913-917
106. Wang J., Kang S.-B., and Kim H.-W. Shear features during equal channel angular pressing of a lamellae eutectic alloy. Mater Sci Engng A 383 (2004) 356-361
107. Xue Q., Beyerlein I.J., Alexander D.J., and Gray III G.T. Mechanisms for initial grain refinement in OFHC copper during equal channel angular pressing. Acta Mater 55 (2007) 655-668
108. Lapovok R., Thomson P.F., Cottam R., and Estrin Y. The effect of grain refinement by warm equal channel angular extrusion on room temperature twinning in magnesium alloy ZK60. J Mater Sci 40 (2005) 1699-1708
109. Lee C.S., and Duggan B.J. Deformation banding and copper-type rolling textures. Acta Metall Mater 41 (1993) 2691-2699
110. Kulkarni S.S., Starke E.A., and Kuhlmann-Wilsdorf D. Some observations on deformation banding and correlated microstructures of two aluminum alloys compressed at different temperatures and strain rates. Acta Mater 46 (1998) 5283-5301
111. Sevillano J.G., Van Houtte P., and Aernoudt E. Large strain work-hardening and textures. Prog Mater Sci 25 (1980) 71-412
112. Oh-Ishi K., Zhilyaev A.P., and McNelley T.R. Effect of strain path on evolution of deformation bands during ECAP of pure aluminium. Mater Sci Engng A 410 (2005) 183-187
113. Huang X. Grain orientation effect on microstructure in tensile strained copper. Scr Mater 38 (1998) 1697-1703
114. Huang X., Borrego A., and Pantleon W. Polycrystal deformation and single crystal deformation: dislocation structure and flow stress in copper. Mater Sci Engng 319 (2001) 237-241
115. Choi W.S., Ryoo H.S., Hwang S.K., Kim M.H., Kwun S.I., and Chae S.W. Microstructure evolution in Zr under equal channel angular pressing. Metall Mater Trans A33 (2002) 973-980
116. Field R.D., Hartwig K.T., Necker C.T., Bingert J.F., and Agnew S.R. Equal-channel angular extrusion of beryllium. Mater Mater Trans A - Phys Metall Mater Sci 33 (2002) 965-972
117. Ryoo H.S., Yu S.H., Oh K.H., and Hwang S.K. Monte Carlo simulation of grain growth in Zr processed by ECAP. Mater Sci Forum 408-412 (2002) 655-660
118. Agnew S.R., Mehrotra P., Lillo T.M., Stoica G.M., and Liaw P.K. Texture evolution of five wrought magnesium alloys during route A equal channel angular extrusion: experiments and simulations. Acta Mater 53 (2005) 3135-3146
119. Yu SH, Shin DH, Hwang SK. Evolution of grain boundary character distribution in ECA-pressed pure titanium. In: Zhu YT et al., editors. Ultra fine-grain symposium III at The Metal Society (TMS); 2004. p. 227-34.
120. Him YS, Kim J, Kim I, Shin DH. Grain refining mechanism of Ti during equal channel angular pressing. In: Zhu YT et al., editors. Ultra fine-grain symposium II at The Metal Society (TMS); 2002. p. 99-104.
121. Alexander DJ, Vogel SC, Li S, Beyerlein IJ. Unpublished data from Los Alamos National Laboratory, I2004.
122. Kim W.J., Hong S.I., Kim Y.S., Min S.H., Jeong H.T., and Lee J.D. Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing. Acta Mater 51 (2003) 3293-3307
123. Liu T., Wang Y.D., Wu S.D., Lin Peng R., Huang C.X., Jiang C.B., et al. Textures and mechanical behavior of Mg-3.3%Li alloy after ECAP. Scr Mater 51 (2004) 1057-1061
124. Agnew S.R., Mehrotra P., Lillo T.M., Stoica G.M., and Liaw P.K. Crystallographic texture evolution of three wrought magnesium alloys during equal channel angular extrusion. Mater Sci Engng A408 (2005) 72-78
125. Kim H.S. Prediction of temperature rise in equal channel angular pressing. Mater Trans 42 (2001) 536-538
126. Partridge P.G. The crystallography and deformation modes of hcp metals. Metall Rev 12 (1967) 169-194
127. Him YS, Kim J, Kim I, Shin DH. Grain refining mechanism of Ti during equal channel angular pressing. In: Zhu YT et al., editors. Ultra fine-grain symposium II; 2002. p. 99-104.
128. Akhtar A., and Teghtsoonian A. Plastic deformation of zirconium single crystals. Acta Metall 19 (1971) 655-663
129. Tomé C.N., Maudlin P.J., Lebensohn R.A., and Kaschner G.C. Mechanical response of zirconium - I. Derivation of a polycrystal constitutive law and finite element analysis. Acta Mater 49 (2001) 3085-3096
130. McCabe R.J., Cerreta E.K., Misra A., Kaschner G.C., and Tomé C.N. Effects of texture, temperature and strain on the deformation modes of zirconium. Philos Mag A86 (2006) 3595-3611
131. Yu S.H., Chun Y.B., Hwang S.K., and Shin D.H. Texture development and Monte-Carlo simulation of microstructure evolution in pure Zr grain-refined by equal channel angular pressing. Philos Mag 85 (2005) 345-371
132. Yapici G.G., Karaman I., and Luo Z.-P. Mechanical twinning and texture evolution in severely deformed Ti-6Al-4V at high temperatures. Acta Mater 54 (2006) 3755-3771
133. Al-Maharbi M, Foley DT, Karaman I, Hartwig KT, Beyerlein IJ, Mathaudhu S, et al. Flow stress anisotropy and tension-compression asymmetry in ultra-fine grained AZ31B magnesium alloy, in preparation.
134. Christian J.W., and Mahajan S. Deformation twinning. Prog Mater Sci 39 (1995) 1-157
135. Yoshida Y., Cisar L., Kamado S., Koike J.-I., and Kojima Y. Effect of microstructural factors on tensile properties of an ECAE-processed AZ31 magnesium alloy. Mater Sci Forum 419-422 (2003) 533-538
136. Fukuda Y., Oh-ishi K., Furukawa M., Horita Z., and Langdon T.G. The application of equal-channel angular pressing to an aluminum single crystal. Acta Mater 52 (2004) 1387-1395
137. Fukuda Y., Oh-ishi K., Furukawa M., Horita Z., and Langdon T.G. Influence of crystal orientation on ECAP of aluminum single crystals. Mater Sci Engng A420 (2006) 79-86
138. Fukuda Y., Oh-Ishi K., Furukawa M., Horita Z., and Langdon T.G. Influence of crystal orientation on the processing of copper single crystals by ECAP. J Mater Sci 42 (2007) 1501-1511
139. Miyamoto H., Fushimi J., Mimaki T., Vinogradov A., and Hashimoto S. Dislocation structures and crystal orientations of copper single crystals deformed by equal-channel angular pressing. Mater Sci Engng A405 (2005) 221-232
140. Han W.Z., Zhang Z.F., Wu S.D., and Li S.X. Influences of crystallographic orientations on deformation mechanism and grain refinement of Al single crystals subjected to one-pass equal-channel angular pressing. Acta Mater 55 (2007) 5889-5900
141. Li S. Comments on ''Influences of crystallographic orientations on deformation mechanism and grain refinement of Al single crystals subjected to one-pass equal-channel angular pressing". Scr Mater 59 (2008) 418-420
142. Tóth L.S. Comments on the paper "Influences of crystallographic orientations on deformation mechanism and grain refinement of Al single crystals subjected to one-pass equal-channel angular pressing". Scr Mater 59 (2008) 381-384
143. Wang S.C., Starink M.J., Gao N., Qiao X.G., Xu C., and Langdon T.G. Texture evolution by shear on two planes during ECAP of a high-strength aluminum alloy. Acta Mater 56 (2008) 3800-3809
144. Goran D., Fundenberger J.J., Suwas S., Bouzy E., Tóth L.S., Skrotzki W., et al. Heterogeneity of deformation in pure Ni single crystal of cube orientation deformed by equal channel angular extrusion. Mater Sci Forum (ICOTOM-14) 495-497 (2005) 833-838
145. Goran D., Fundenberger J.-J., Suwas S., Bouzy E., Tóth L.S., Skrotzki W., et al. Pure Ni single crystal of cube orientation deformed by equal channel angular extrusion. Solid State Phenom 105 (2005) 333-339
146. Goran D. Hétérogénéité de deformation plastique des monocristaux de nickel déformés à froid par ECAE. Ph.D. thesis, Université de Metz, France; 2007.
147. Grosdidier T., Fundenberger J.J., Goran D., Bouzy E., Suwas S., Skrotzki W., et al. On microstructure and texture heterogeneities in single crystals deformed by equal channel angular extrusion. Scr Mater 59 (2008) 1087-1090
148. Stout MG, Kallend JS, Kocks UF, Przystupa MA, Rollett AD. Material dependence of deformation texture development in various deformation modes. In: Kallend JS, Gottstein G. editors. Proceedings of the ICOTOM8, the eighth international conference on textures of materials, Santa Fe; September 20-25, 1988. p. 479.
149. Komura S., Horita Z., Nemoto M., and Langdon T.G. Influence of stacking fault energy on microstructural development in equal-channel angular pressing. J Mater Res 14 (1999) 4044-4050
150. Tomé C.N., Lebensohn R.A., and Necker C.T. Mechanical anisotropy and grain interaction in recrystallized aluminium. Metall Mater Trans A 33 (2002) 2635-2648
151. Yoo M.H., and Wei C.T. Slip modes of hexagonal-close-packed metals. Philos Mag 14 (1966) 573-587
152. DeLo DP, Bieler TR, Semiatin SL. Microstructure and texture evolution during equal channel angular extrusion of Ti-6Al-4V. In: Zhu YT et al., editors. Ultra fine-grain symposium at The Metal Society (TMS), March 12-16, 2000. p. 257-66.
153. Yu S.H., Shin D.H., Park N.J., Huh M.Y., and Hwang S.K. Evolution of texture in Zr and Ti grain-refined by ECAP. Mater Sci Forum (ICOTOM-13) 408-412 (2002) 661-666
154. Haessner F. The study of recrystallization by calorimetric methods. In: Chandra T. (Ed). Recrystallization 90 (1990), TMS, Warrendale 511
155. Montheillet F., and Le Coze J. Influence of purity on the dynamic recrystallization of metals and alloys. Phys Stat Sol 189 (2002) 51-58
156. Skrotzki W., Scheerbaum N., Oertel C.-G., Brokmeier H.-G., Suwas S., and Tóth L.S. Recrystallization of high purity aluminum during equal channel angular pressing. Acta Mater 55 (2007) 2211-2218
157. Gholinia A., Prangnell P.B., and Marushev M.V. The effect of strain path on the development of deformation structures in severely deformed aluminium alloys processed by ECAE. Acta Mater 48 (2000) 1115-1130
158. Salem A.A., Langdon T.G., McNelley T.R., Kalidindi S.R., and Semiatin S.L. Strain-path effects on the evolution of microstructure and texture during the severe-plastic deformation of aluminium. Met Mater Trans 37A (2006) 2879-2891
159. Chung Y.H., Kim H.D., Jeong H.T., Engler O., and Huh M.Y. Evolution of texture and microstructure in AA 3004 sheets during continuous confined strip shearing deformation and subsequent annealing. Mater Sci Forum 396-4 (2002) 475-480
160. Park J.Y., Hong S.H., and Lee D.N. Analysis of deformation and recrystallization textures of shear deformed 1050 aluminum alloy. Mater Sci Forum 408-4 (2002) 1431-1436
161. Mizera J., Lewandowska M., Adamczyk-Cieslak B., and Kurzydlowski K.J. Recrystallization and grain growth in Al-Li alloys subjected to severe plastic deformation. Mater Sci Forum 467-470 (2004) 1301-1306
162. Nowell M.M., Field D.P., Wright S.I., and Lillo T.M. In-situ EBSD investigation of recrystallization in ECAE processed copper. Mater Sci Forum 467-470 (2004) 1401-1405
163. Jin Y.H., Huh M.Y., and Chung Y.H. Evolution of textures and microstructures in IF-steel sheets during continuous confined strip shearing and subsequent recrystallization annealing. J Mater Sci 39 (2004) 5311-5314
164. Ferrasse S., Segal V.M., and Alford F. Effect of additional processing on texture evolution of Al0.5Cu alloy processed by equal channel angular extrusion (ECAE). Mater Sci Engng A 372 (2004) 44-55
165. Ferry M., Hamilton N.E., and Humphreys F.J. Continuous and discontinuous grain coarsening in a fine-grained particle-containing Al-Sc alloy. Acta Mater 53 (2005) 1097-1109
166. Yu C.Y., Sun P.L., Kao P.W., and Chang C.P. Evolution of microstructure during annealing of a severely deformed aluminium. Mater Sci Engng A366 (2004) 310-317
167. Etter A.L., Solas D., Baudin T., and Penelle R. Evolution of microstructure and texture during annealing of a copper processed by ECAE. Mater Sci Forum 495-497 (2005) 845-850
168. Kusnierz J., Mathon M.H., Baudin T., Jasienski Z., and Penelle R. Texture of Al-Cu alloys deformed by ECAP. Mater Sci Forum 495-497 (2005) 851-856
169. Necker C.T., Alexander D.J., and Beyerlein I.J. Equal channel angular extrusion heterogeneities in recrystallized copper. Mater Sci Forum 495-497 (2005) 857-862
170. Haouaoui M., Hartwig K.T., and Payzant E.A. Effect of strain path on texture and annealing microstructure development in bulk pure copper processed by simple shear. Acta Mater 53 (2005) 801-810
171. Ferry M., and Burhan N. Structural and kinetic aspects of continuous grain coarsening in a fine-grained Al-0.3Sc alloy. Acta Mater 55 (2007) 3479-3491
172. Field D.P., Bradford L.T., Nowell M.M., and Lillo T.M. The role of annealing twins during recrystallization of Cu. Acta Mater 55 (2007) 4233-4241
173. Molodova X., Gottstein G., Winning M., and Hellmig R.J. Thermal stability of ECAP processed pure copper. Mater Sci Engng A460-461 (2007) 204-213
174. Agnew S.R., Horton J.A., Lillo T.M., and Brown D.W. Enhanced ductility in strongly textured magnesium produced by equal channel angular processing. Scr Mater 50 (2004) 377-381
175. Yu S.H., Chun Y.B., Cao W.Q., Kim M.H., Chae S.W., Kwun S.I., et al. Comparison of equal channel angular pressing and cold rolling in the evolution of microstructure and texture in zirconium. Met Mater Int 11 (2005) 101-111
176. Eddahbi M., del Valle J.A., Pérez-Prado M.T., and Ruano O.A.
177. Sun P.L., Kao P.W., and Chang C.P. Characteristics of submicron grained structure formed in aluminum by equal channel angular extrusion. Mater Sci Engng A 283 (2000) 82-85
178. Pithan C., Hashimoto T., Kawazoe M., Nagahora J., and Higashi K. Microstructure and texture evolution in ECAE processed A5056. Mater Sci Engng A280 (2000) 62-68
179. Tóth L.S., Jonas J.J., Daniel D., and Bailey J.A. Texture development and length changes in copper bars subjected to free end torsion. Textures and Microstructures 19 (1992) 245-262
180. Jonas J.J., and Tóth L.S. Modelling oriented nucleation and selective growth during dynamic recrystallization. Scr Met Mater 27 (1992) 1575-1580
181. Tóth L.S., and Jonas J.J. Modelling the texture changes produced by dynamic recrystallization. Scr Met Mater 27 (1992) 359-363
182. Cabibbo M., Evangelista E., and Scalabroni C. EBSD FEG-SEM, TEM and XRD techniques applied to grain study of a commercially pure 1200 aluminum subjected to equal-channel angular-pressing. Micron 36 (2005) 401-414
183. Skrotzki W., Klöden B., Hünsche I., Chulist R., Suwas S., and Tóth L.S. Influence of dynamic recrystallization on texture formation in ECAP deformed nickel. Mater Sci Forum 558-559 (2007) 575-580
184. Neishi K., Horita Z., and Langdon T.G. Grain refinement of pure nickel using equal-channel angular pressing. Mater Sci Engng A325 (2002) 54-58
185. Nadella RK, Samajdar I, Gottstein G. In: Proceedings of the magnesium alloys and its applications. Berlin: Springer; 2003. p. 1052.
186. Suwas S., Gottstein G., and Kumara R. Evolution of crystallographic texture during equal channel angular extrusion (ECAE) and its effects on secondary processing of magnesium. Mater Sci Engng A 471 (2007) 1-14
187. Beausir B, Tóth LS, Qods F, Neale KW. Texture and mechanical behavior of magnesium during free end torsion. J Engng Mater Technol 2009;131:011108-1-15.
188. Molinari A., Canova G.R., and Ahzi S. A self-consistent approach of the large deformation polycrystal viscoplasticity. Acta Metall 35 (1987) 2983-2994
189. Lebensohn R.A., and Tomé C.N. A self-consistent anisotropic approach for the simulation of plastic-deformation and texture development of polycrystals - application to zirconium alloys. Acta Metall Mater 41 (1993) 2611-2624
190. Taylor G.I. Plastic strain in metals. J Inst Metals 62 (1938) 307-324
191. Baik S.C., Estrin Y., Kim H.S., and Hellmig R.J. Dislocation density-based modeling of deformation behavior of aluminium under equal channel angular pressing. Mater Sci Engng 351 (2003) 86-97
192. Gholinia A., Bate P., and Prangnell P.B. Modelling texture development during equal channel angular extrusion of aluminium. Acta Mater 50 (2002) 2121-2136
193. Agnew SR, Kocks UF, Hartwig KT, Weertman JR. In: Proceedings of the 19th Risø international symposium on materials science. Risø National Laboratory; 1998. p. 2201.
194. Lee J.W., and Park J.J. Numerical and experimental investigations of constrained groove pressing and rolling for grain refinement. J Mater Proc Technol 130-131 (2002) 208-213
195. Kim H.S. Finite element analysis of deformation behaviour of metals during equal channel multi-angular pressing. Mater Sci Engng A328 (2002) 317-323
196. Li S., Bourke M.A.M., Beyerlein I.J., Alexander D.J., and Clausen B. Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion. Mater Sci Engng A382 (2004) 217-236
197. Suo T., Li Y., Guo Y., and Liu Y. The simulation of deformation distribution during ECAP using 3D finite element method. Mater Sci Engng A432 (2006) 269-274
198. Dumoulin S., Roven H.J., Werenskiold J.C., and Valberg H.S. Finite element modeling of equal channel angular pressing: effect of material properties, friction and die geometry. Mater Sci Engng A 410-411 (2005) 248-251
199. Kim H.S., Seo M.H., and Hong S.I. On the die corner gap formation in equal channel angular pressing. Mater Sci Engng A291 (2000) 86-90
200. Bowen J.R., Gholinia A., Roberts S.M., and Prangnell P.B. Analysis of the billet deformation behaviour in equal channel angular extrusion. Mater Sci Engng A287 (2000) 87-99
201. Zaïri F., Aour B., Gloaguen J.M., Naït-Abdelaziz M., and Lefebvre J.M. Influence of the initial yield strain magnitude on the materials flow in equal-channel angular extrusion process. Scr Mater 56 (2007) 105-108
202. Oh S.J., and Kang S.B. Analysis of the billet deformation during equal channel angular pressing. Mater Sci Engng A343 (2003) 107-115
203. Zhernakov V.S., Budilov I.N., Alexandrov I.V., and Beyerlein I.J. Comparison of the plastic strain distribution during equal-channel angular pressing (ECAP) using 2D and 3D FEM modeling. Int J Mater Res 98 (2007) 178-183
204. Kim H.S., Hong S.I., and Seo M.H. Effects of strain hardenability and strain-rate sensitivity on the plastic flow and deformation homogeneity during equal channel angular pressing. J Mater Res 16 (2001) 856-864
205. Hasani A., Lapovok R., Tóth L.S., and Molinari A. Deformation field variations in equal channel angular extrusion due to back pressure. Scr Mater 58 (2008) 771-774
206. Kim H.S. On the effect of acute angles on deformation homogeneity in equal channel angular pressing. Mater Sci Engng A430 (2006) 346-349
207. Segal VM, Goforth RE, Hartwig KT. 1995. Texas A&M University, US Patent No. 5,400,633.
208. Semiatin S.L., Delo D.P., and Shell E.B. The effect of material properties and tooling design on deformation and fracture during equal channel angular extrusion. Acta Mater 48 (2000) 1841-1851
209. Budilov I.N., Alexandrov I.V., Lukaschuk Y.u.V., Beyerlein I.J., and Zhernakov V.S. Three-dimensional modeling of plastic deformation flow during ECAP. Ultrafine Grain Mater III (2004) 193-198
210. Nagasekhar A.V., and Tick-Hon Y. Optimal tool angles for equal channel angular extrusion of strain hardening materials by finite element analysis. Comp Mater Sci 30 (2004) 489-495
211. DeLo D.P., and Semiatin S.L. Finite-element modeling of nonisothermal equal-channel angular extrusion. Metall Mater Trans 30A (1999) 1391-1402
212. Figueiredo R.B., Aguilar M.T.P., and Cetlin P.R. Finite element modelling of plastic instability during ECAP processing of flow-softening materials. Mater Sci Engng A 430 (2006) 179-184
213. Lapovok R., Tóth L.S., Molinari A., and Estrin Y. Strain localization patterns under equal channel angular extrusion. J Mech Phys Solids 57 (2009) 122-136
214. Kim H.S. Finite element analysis of equal channel angular pressing using a round corner die. Mater Sci Engng A315 (2001) 122-128
215. Yoon S.C., Quang P., Hong S.I., and Kim H.S. Die design for homogeneous plastic deformation during equal channel angular pressing. J Mater Proc Technol 187-188 (2007) 46-50
216. Wu Y., and Baker I. An experimental study of equal channel angular extrusion. Scr Mater 37 (1997) 437-442
217. Yoon S.C., Seo M.H., and Kim H.S. Preform effect on the plastic deformation behavior of workpieces in equal channel angular pressing. Scr Mater 55 (2006) 159-162
218. Lapovok R.Y. The role of back-pressure in equal channel angular extrusion. J Mater Sci 40 (2005) 341-346
219. Nagasekhar A.V., Tick-Hon Y., Li S., and Seow H.P. Effect of acute tool-angles on equal channel angular extrusion/pressing. Mater Sci Engng A410-411 (2005) 269-272
220. Cui H.J., Goforth R.E., and Hartwig K.T. The three-dimensional simulation of flow pattern in equal-channel angular extrusion. JOM-e 50 8 (1998)
221. Li S., Kalidindi S.R., and Beyerlein I.J. A crystal plasticity finite element analysis of texture evolution in equal channel angular extrusion. Mater Sci Engng A410-411 (2005) 207-212
222. Chung S.W., Somekawa H., Kinoshita T., Kim W.J., and Higashi K. The non-uniform behavior during ECAE process by 3-D FVM simulation. Scr Mater 50 (2004) 1079-1083
223. Kim W.J., and Namkung J.C. Computational analysis of effect of route on strain uniformity in equal channel angular extrusion. Mater Sci Engng A412 (2005) 287-297
224. Kim W.J., Namkung J.C., and Kim J.K. Analysis of strain uniformity during multi-pressing in equal channel angular extrusion. Scr Mater 53 (2005) 293-298
225. Suo T., Li Y., Guo Y., and Liu Y. The simulation of deformation distribution during ECAP using 3D finite element method. Mater. Sci. Engng. A432 (2006) 269-274
226. Rosochowski A., and Olejnik L. Numerical and physical modelling of plastic deformation in 2-turn equal channel angular extrusion. J Mater Proc Technol 125-126 (2002) 309-316
227. Signorelli J.W., Logé R., Turner P.A., Sordi V., Vieira E.A., Ferrante M., et al. ECAE of Al-4%Cu alloys: experimental study assisted by polycrystalline-FEM simulations. Mater Sci Forum 495-497 (2005) 775-784
228. Gazder A.A., Li S., Dalla Torre F.H., Beyerlein I.J., Gu C.F., Davies C.H.J., et al. Progressive texture evolution during equal channel angular extrusion. Mater Sci Engng A437 (2006) 259-267
229. Estrin Y., Toth L.S., Molinari A., and Brechet Y. A dislocation-based model for all hardening stages in large strain deformation. Acta Mater 46 (1998) 5509-5522
230. Zhernakov V.S., Budilov I.N., Alexandrov I.V., and Beyerlein I.J. Comparison of the plastic strain distribution during equal-channel angular pressing (ECAP) using 2D and 3D FEM modelling. Int J Mater Res 98 (2007) 178-183
231. Stoica G.M., and Liaw P.K. Evaluating the induced strain during equal channel angular processing. Mater Lifetime Sci Engng (2003) 119-133
232. Skrotzki W, Klöden B, Oertel C-G, Scheerbaum N, Brokmeier H-G, Suwas S, et al. Texture gradient in fcc metals deformed by equal channel angular pressing as a function of stacking fault energy. In: Zhu YT, Langdon TG, Horita Z, Zehetbauer MJ, Semiatin SL, Lowe TC, editors. Ultrafine grained materials IV. TMS (The Minerals, Metals and Materials Society); 2006.
233. Skrotzki W., Scheerbaum N., Oertel C.-G., Brokmeier H.G., Suwas S., and Tóth L.S. Texture gradient in ECAP copper measured by synchrotron radiation. ITAP-2 Solid State Phenom 105 (2004) 327-332
234. Skrotzki W., Tóth L.S., Klöden B., Brokmeier H.G., and Arruffat-Massion R. Texture after ECAP of a cube oriented Ni single crystal. Acta Mater 56 (2008) 3439-3449
235. Skrotzki W., Scheerbaum N., Oertel C.-G., Brokmeier H.G., Suwas S., and Tóth L.S. Texture gradient in ECAP silver measured by synchrotron radiation ICOTOM-14. Mater Sci Forum 495-497 (2005) 821-826
236. Segal V.M. Slip line solutions, deformation mode and loading history during equal channel angular extrusion. Mater Sci Engng A345 (2003) 36-46
237. Iwahashi Y., Wang J.T., Horita Z., Nemoto M., and Langdon T.G. Principle of equal channel angular pressing for the processing of ultra-fine grained materials. Scr Mater 35 (1996) 143-146
238. Hasani A. Ph.D. Thesis, University of Metz, France, 2009.
239. Bronkhorst C.A., Kalidindi S.R., and Anand L. Polycrystalline plasticity and the evolution of crystallographic textures in FCC metals. Philos Trans Royal Soc Lond 421A (1992) 443-477
240. Wu P.D., Huang Y., and Lloyd D.J. Studying grain fragmentation in ECAE by simulating simple shear. Scr Mater 54 (2006) 2107-2112
241. Hughes D.A., Lebensohn R.A., Wenk H.R., and Kumar A. Stacking fault energy and microstructure effects on torsion texture evolution. Proc Roy Soc Lond A 456 (2000) 921-953
242. Enikeev N.A., Abdullin M.F., Nazarov A.A., and Beyerlein I.J. Modelling grain refinement in fcc metals during equal-channel angular pressing by route "C". Int J Mater Res 98 (2007) 167-171
243. Nazarov A.A., Enikeev N.A., Romanov A.E., Orlova T.S., Alexandrov I.V., Beyerlein I.J., et al. Analysis of substructure evolution during simple shear of polycrystals by means of a combined viscoplastic self-consistent and disclination modeling approach. Acta Mater 54 (2006) 985-995
244. Sivakumar S.M., and Ortiz M. Microstructure evolution in the equal channel angular extrusion process. Computer Methods App Mech Engng 193 (2004) 5177-5194
245. Mahesh S., and Tomé C.N. Deformation banding under arbitrary monotonic loading in cubic metals. Philos Mag 84 (2004) 3517-3546
246. Nazarov AA, Alexandrov IV, Beyerlein IJ, Enikeev, NA, Orlova, TS, Romanov AE, et al. Modeling of grain refinement and texture evolution during equal-channel angular pressing by means of combined visco-plastic self consistent/disclination model. In: Zhu YT, Langdon TG, Horita Z, Zehetbauer MJ, Semiatin SL, Lowe TC, editors. Ultrafine grained materials IV. TMS (The Minerals, Metals and Materials Society); 2006.
247. Wu P.C., Chang C.P., and Kao P.W. The distribution of dislocation walls in the early processing stage of equal channel angular extrusion. Mater Sci Engng A 374 (2004) 196-203
248. Beyerlein I.J., and Tomé C.N. Modeling transients in the mechanical response of copper due to strain path changes. Int J Plast 23 (2007) 640-664
249. Beyerlein IJ, Tomé CN. Modeling directional anisotropy in grains subjected to large strains and strain path changes. In: Zhu YT, Langdon TG, Horita Z, Zehetbauer MJ, Semiatin SL, Lowe TC, editors. Ultrafine grained materials IV. TMS; 2006. p. 63-71.
250. Tome C.N., Lebensohn R.A., and Kocks U.F. A model for texture development dominated by deformation twinning - application to zirconium alloys. Acta Mater 39 (1991) 2667-2680
251. Van Houtte P. Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning. Acta Metall 26 (1978) 591-604
252. Proust G., Tomé C.N., and Kaschner G.C. Modeling texture, twinning and hardening evolution during deformation of hexagonal materials. Acta Mater 55 (2007) 2137-2148
253. Capolungo L., Beyerlein I.J., and Tomé C.N. Slip-assisted twin growth in hcp metals. Scr Mater 60 (2009) 32-35
254. Capolungo L, Beyerlein IJ, Kaschner GC, Tomé CN. On the role of stored slip dislocations in twin growth in hcp metals. Mater Sci Engng A, in press.
255. Capolungo L., and Beyerlein I.J. Nucleation and stability of twins in hcp metals. Phys Rev B 78 (2008) 024117
256. Backofen W.A. The torsion texture of copper. Trans AIME 188 (1950) 1454-1459
257. Tomé C.N., Canova G.R., Kocks U.F., Christodoulou N., and Jonas J.J. The relation between macroscopic and microscopic strain hardening in FCC polycrystals. Acta Metall 32 (1984) 1637-1653
258. Sun P.-L., Kao P.-W., and Chang C.P. Effect of deformation route on microstructural development in aluminum processed by equal channel angular extrusion. Metall Mater Trans A 35 (2004) 1359-1368
259. Beyerlein I.J. Advances in nanostructured materials processed by severe plastic deformation. Mater Sci Forum 579 (2008) 41-60
260. Brown D.W., Abeln S.P., Blumenthal W.R., Bourke M.A.M., Mataya M.C., and Tome C.N. Development of crystallographic texture during high rate deformation of rolled and hot-pressed beryllium. Mater Metall Trans A 36 (2005) 929-939
261. Brown D.W., Agnew S.R., Abeln S.P., Blumenthal W.R., Bourke M.A.M., Mataya M.C., et al. The role of texture, temperature, and strain rate in the activity of deformation twinning. Mater Sci Forum 495-497 (2005) 1037-1042
262. Brown DW. Private communication.
263. McNelley TR, Swisher DL, Horita Z, Langdon TG. Influence of processing route on microstructural and grain boundary development during equal-channel angular pressing of pure aluminum. In: Zhu YT, et al., editors. Ultra fine grained materials II. TMS (The Minerals, Metals, and Materials Society); 2002. p. 15-24.
264. Huang W., Yu C.Y., Kao P.W., and Chang C.P. The effect of strain path and temperature on the microstructure developed in copper processed by ECAE. Mater Sci and Engng A 366 (2004) 221-228
265. Stolyarov V.V., Zhu Y.T., Alexandrov I.V., Lowe T.C., and Valiev R.Z. Influence of ECAP routes on the microstructure and properties of pure Ti. Mater Sci Engng 299 (2001) 59-67
266. Bengus V.Z., Tabachnikova E.D., Natsik V.D., Mishkuf I., Chakh K., Stolyarov V.V., et al. Low-temperature deformation and fracture of bulk nanostructural titanium obtained by intense plastic deformation using equal channel angular pressing. Low Temp Phys 28 (2002) 864-874
267. Kim W.-J., Chung S.W., Chung C.S., and Kum D. Superplasticity in thin magnesium alloy sheets and deformation mechanism maps for magnesium alloys at elevated temperatures. Acta Mater 49 (2001) 3337-3345
268. Horita Z., Fujinami T., and Langdon T.G. The potential for scaling ECAP: effect of sample size on grain refinement and mechanical properties. Mater Sci Engng A318 (2001) 34-41
269. Alexander DJ, Beyerlein IJ. Mechanical properties of high-purity copper processed by equal channel angular extrusion. In: Zhu YT, Langdon TG, Horita Z, Zehetbauer MJ, Semiatin SL, Lowe TC, editors. Ultrafine grained materials III. TMS; 2004. p. 517-22.
270. Tóth L.S. Modelling of strain hardening and microstructural evolution in equal channel angular extrusion. Computational Mater Sci 32 (2005) 568-576
271. Figueiredo RB, Beyerlein IJ, Zhilyaev AP, Langdon TG, in preparation, 2009.