Microstructural refinement and deformation twinning during severe plastic deformation of 316L stainless steel at high temperatures

Journal of Materials Research

Volumn 19, Issue 8, 2004, Pages 2268-2278

  Yapici, G G ^a   Karaman, I ^a   Luo, Z P ^a   Maier, H J ^b   Chumlyakov, Y I ^c  

^a Texas AandM University   (United States)

^b UNIVERSITY OF PADERBORN   (Germany)

^c TOMSK STATE UNIVERSITY   (Russian Federation)

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITE; COMPRESSIVE STRENGTH; CRYSTAL MICROSTRUCTURE; DISLOCATIONS (CRYSTALS); GRAIN SIZE AND SHAPE; HIGH TEMPERATURE EFFECTS; METAL EXTRUSION; PLASTIC DEFORMATION; STRAIN RATE; STRESSES; TENSILE STRENGTH; TWINNING;

AUSTENITIC STAINLESS STEEL; DEFORMATION TWINNING; EQUAL CHANNEL ANGULAR EXTRUSION; MICROSTRUCTURAL REFINEMENT;

STAINLESS STEEL;

EID: 4644230088     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/JMR.2004.0289     Document Type: Article

References (61)

1. J.W. Simmons: High-nitrogen alloying of stainless steels. Mater. Sci. Eng. A 207, 159 (1996).
2. V. Tsakiris and D.V. Edmonds: Martensite and deformation twinning in austenitic steels. Mater. Sci. Eng. A 273, 430 (1999).
3. I. Karaman, H. Sehitoglu, H.J. Maier, and Y.I. Chumlyakov: Competing mechanisms and modeling of deformation in austenitic stainless steel single crystals with and without nitrogen. Acta Mater. 49, 3919 (2001).
4. I. Karaman, K. Gall, H. Sehitoglu, Y.I. Chumlyakov, and H.J. Maier: Deformation of single crystal Hadfield steel by twinning and slip. Acta Mater. 48, 1345 (2000).
5. I. Karaman, H. Sehitoglu, A.J. Beaudoin, H.J. Maier, Y.I. Chumlyakov, and C.N. Tome: Modeling the deformation behavior of Hadfield steel single and polycrystals due to twinning and slip. Acta Mater. 48, 2031 (2000).
6. J.W. Christian and S. Mahajan: Deformation twinning. Prog. Mater. Sci. 39, 1 (1995).
7. I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, H.J. Maier, and I.V. Kireeva: The Effect of Twinning and Slip on the Bauschinger Effect of Hadfield Steel Single Crystals. Metall. Mater. Trans. A 32, 695 (2001).
8. I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, H.J. Maier, and I.V. Kireeva: Extrinsic stacking faults and twinning in Hadfield manganese steel single crystals. Scripta Mater. 44, 337 (2001).
9. I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, and H.J. Maier: The Deformation of Low-Stacking-Fault-Energy Austenitic Steels. JOM 54, 31 (2002).
10. R.L. Peng, M. Oden, Y.D. Wang, and S. Johansson: Intergranular strains and plastic deformation of an austenitic stainless steel. Mater. Sci. Eng. A 334, 215 (2002).
11. N. Narita and J. Takamura: Deformation twinning in silver-alloy and copper-alloy crystals, in Dislocations in Solids, edited by F.R.N. Nabarro, 1992, vol. 9, p. 135.
12. I.A. Yakubtsov, A. Ariapour, and D.D. Perovic: Effect of nitrogen on stacking fault energy of f.c.c, iron-based alloys. Acta Mater. 47, 1271 (1999).
13. M. Fujita, Y. Kaneko, A. Nohara, H. Saka, R. Zauter, and H. Mughrabi: Temperature dependence of the dissociation width of dislocations in a commercial 304L stainless steel. ISIJ Int. 34, 697 (1994).
14. Y.I. Chumlyakov, I.V. Kireeva, A.D. Korotaev, and L.S. Aparova: Plastic deformation of single crystals of austenitic stainless steel single crystal strengthened by nitrogen. 2. Orientation dependence of deformational strengthening coefficient. Phy. Met. Metall. 75, 218 (1993).
15. Y.I. Chumlyakov, I.V. Kireeva, and A.D. Korotaev: Plastic deformation of austenitic stainless steel single crystal strengthened by nitrogen. Phy. Met. Metall. 73, 429 (1992).
16. Y.I. Chumlyakov, I.V. Kireeva, and O.V. Ivanova: Plastical deformation of single crystals of austenitic stainless steel strengthened by nitrogen. 3. Asymmetry and orientational dependence of critical shearing stresses in steels with different stacking fault energies. Phy. Met. Metall. 78, 350 (1994).
17. T.S. Byun: On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels. Acta Mater. 51, 3063 (2003).
18. E.H. Lee, T.S. Byun, J.D. Hunn, M.H. Yoo, K. Farrell, and L.K. Mansur: On the origin of deformation microstructure in austenitic stainless steel: part I - microstructures. Acta Mater. 49, 3269 (2001).
19. E.H. Lee, M.H. Yoo, T.S. Byun, J.D. Hunn, K. Farrell, and L.K. Mansur: On the origin of deformation microstructures in austenitic stainless steel: Part II - Mechanisms. Acta Mater. 49, 3277 (2001).
20. E.H. Lee, T.S. Byun, J.D. Hunn, K. Farrell, and L.K. Mansur: Origin of hardening and deformation mechanisms in irradiated 316 LN austenitic stainless steel. J. Nucl. Mater. 296, 183 (2001).
21. T.S. Byun, K. Farrell, E.H. Lee, J.D. Hunn, and L.K. Mansur: Strain hardening and plastic instability properties of austenitic stainless steels after proton and neutron irradiation. J. Nucl. Mater. 298, 269 (2001).
22. R.L. Peng, M. Oden, Y.D. Wang, and S. Johansson: Intergranular strains and plastic deformation of an austenitic stainless steel. Mater. Sci. Eng. A. 334, 215 (2002).
23. L.H. Almeida, I.L. May, and P.R. Emygdio: Mechanistic Modeling of Dynamic Strain Aging in Austenitic Stainless Steels. Mater. Charac. 41, 137 (1998).
24. E.S. Puchi-Cabrera: High temperature deformation of 316L stainless steel. Mater. Sci. Technol. 17, 155 (2001).
25. S.H. Cho, Y.C. Yoo, and J.J. Jonas: Static and dynamic strain aging in 304 austenitic stainless steel at elevated temperatures. J. Mater. Sci. Lett. 19, 2019 (2000).
26. K.G. Samuel, S.L. Mannan, and P. Rodriguez: Serrated yielding in AISI 316 stainless steel. Acta Metall. 36, 2323 (1988).
27. E.S. Puchi-Cabrera: Mechanical behaviour of 316L stainless steel under warm working conditions. Mater. Sci. Tech. 19, 189 (2003).
28. S. Venugopal, S.N. Mannan, and Y.V.R.K. Prasad: Optimization of cold and warm workability in stainless steel type AISI 316L using instability maps. J. Nucl. Mater. 227, 1 (1995).
29. S. Venugopal, S.N. Mannan, and Y.V.R.K. Prasad: Processing map for hot-working of stainless-steel type AISI-316L. Mater. Sci. Technol. 9, 899 (1993).
30. K. Tsuzaki, T. Hori, T. Maki, and I. Tamura: Dynamic strain aging during fatigue deformation in type 304 austenitic stainless steel. Mater. Sci. Eng. 61, 247 (1983).
31. A.K. Sanchdev and M.M. Shea: Twinning in metastable Fe-Ni-C austenite during elevated temperature deformation. Mater Sci. Eng. 95, 31 (1987).
32. M.X. Zhang and P.M. Kelly: Relationship between stress-induced martensitic transformation and impact toughness in low carbon austenitic steels. J. Mater. Sci. 37, 3603 (2002).
33. Z. Khan and M. Ahmed: Stress-induced martensitic transformation in metastable austenitic stainless steels: Effect on fatigue crack growth rate. J. Mater. Eng. Perf 5, 201 (1996).
34. X. Feaugas: On the origin of the tensile flow stress in the stainless steel AISI 316L at 300K: back stress and effective stress. Acta Mater. 47, 3617 (1999).
35. A. Belyakov, T. Sakai, and H. Miura: Microstructure and deformation behaviour of submicrocrystalline 304 stainless steel produced by severe plastic deformation. Mater. Sci. Eng. A. 319, 867 (2001 ).
36. S.V. Dobatkin: Grain Refinement and Phase Transformations in Al and Fe Based Alloys During Severe Plastic Deformation in Ultrafine Grained Materials II, in Ultrafine Grained Materials II, edited by Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran, and T.C. Lowe (Proceedings of 2002 TMS Annual Meeting, TMS, Warrendale, PA, 2002), p. 183.
37. B.P. Kashyap, K. McTaggart, and K. Tangri: Study on the substructure evolution and flow behaviour in type 316L stainless steel over the temperature range 21-900°C. Philos. Mag. A 57, 97 (1988).
38. B.P. Kashyap and K. Tangri: On the hall-petch relationship and substructural evolution in type 316L stainless steel. Acta Metall. Mar. 43, 3971 (1995).
39. T.C. Lowe and R.Z. Valiev: Producing Nanoscale Microstructures through Severe Plastic Deformation. JOM 52, 27 (2000).
40. L.R. Cornwell, K.T. Hartwig, R.E. Goforth, and S.L. Semiatin: Erratum to the equal channel angular extrusion process for materials processing. Mater. Charac. 38, 119 (1997).
41. J. Robertson, J-T. Im, I. Karaman, K.T. Hartwig, and I.E. Anderson: Consolidation of amorphous copper based powder by equal channel angular extrusion. J. Non-Cryst. Solids 317, 144 (2003).
42. V.M. Segal: Materials processing by simple shear. Mater Sci. Eng. A 197, 157 (1995).
43. J.S. Kallend, U.F. Kocks, A.D. Rollett, and R.H. Wenk: Operational texture analysis. Mater. Sci. Eng. A 132, 1 (1991).
44. P. Mullner and C. Solenthaler: On the effect of deformation twinning on defect densities. Mater. Sci. Eng. A. 230, 107 (1997).
45. 3Mn superlattice. Philos. Mag. 6, 871 (1961).
46. S.M. Copley and B.H. Kear: The dependence of the width of a dissociated dislocation on dislocation velocity. Acta Metall. 16, 227 (1968).
47. D. Goodchild, W.T. Roberts, and D.V. Wilson: Plastic deformation and phase transformation in textured austenitic stainless steel. Acta Metall. 18, 1137 (1970).
48. M. Fujita, Y. Kaneko, A. Nohara, H. Saka, R. Zauter, and H. Mughrabi: Temperature dependence of the dissociation width of dislocations in a commercial 304L stainless steel. ISIJ J. 34, 697 (1994).
49. I. Karaman, H. Sehitoglu, K. Gall, and Y.I. Chumlyakov: On the deformation mechanisms in single crystal Hadfield manganese steels. Scripta Mater. 38, 1009 (1998).
50. Y.I. Chumlyakov, I.V. Kireeva, H. Sehitoglu, and I. Karaman: Twinning in Hadfield-Steel single crystals. Doklady Phys. 45, 101 (2000).
51. R.M. Latanison and A.W. Ruff: Temperature dependence of stacking fault energy in Fe-Cr-Ni alloys. Metall. Trans. 2, 505 (1971).
52. F. Lecroisey and A. Pineau: Martensitic transformations induced by plastic-deformation in Fe-Ni-Cr system. Metall. Trans. 3, 387 (1972).
53. H.J. Kestenbach: Effect of applied stress on partial dislocation separation and dislocation substructure in austenitic stainless-steel. Phil. Mag. 36, 1509 (1977).
54. S.N. Monteiro and H.J. Kestenbach: Influence of grain orientation on the dislocation substructure in austenitic stainless steel. Metall. Trans. A 6, 938 (1975).
55. H.S. Kim, M.H. Seo, and S.I. Hong: Finite element analysis of equal channel angular pressing of strain rate sensitive metals. J. Mater. Process. Technol. 130, 497 (2002).
56. G.G. Yapici, I. Karaman, Z.P. Luo, and H. Rack: Microstructure and mechanical properties of severely deformed powder processed Ti-6Al-4V using equal channel angular extrusion. Scripta Mater. 49, 1021 (2003).
57. I. Karaman, H.E. Karaca, H.J. Maier, and Z.P. Luo: The Effect of Severe Marforming on Shape Memory Characteristics of a Ti-Rich NiTi Alloy Processed Using Equal Channel Angular Extrusion. Metall. Mater. Trans. A 34, 2527 (2003).
58. D.P. DeLo and S.L. Semiatin: Hot Working of Ti-6Al-4V via Equal Channel Angular Extrusion. Metall. Mater. Trans. A 30, 2473 (1999).
59. M. Haouaoui, I. Karaman, H. Maier, and K.T. Hartwig: Microstructural evolution and mechanical behavior of bulk copper obtained by consolidation of micro- and nanopowders using equal channel angular extrusion. (2003, unpublished).
60. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Bulk nanostructured materials from severe plastic deformation. Prog. Mater. Sci. 45, 103 (2000).
61. W.F. Hosford, Mechanics of Crystals and Textured Polycrystals (Oxford University Press, Oxford, U.K., 1993).