Deformation textures of AA8011 aluminum alloy sheets severely deformed by accumulative roll bonding

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 36, Issue 11, 2005, Pages 3151-3163

  Kim, Hyoung Wook ^a   Kang, Suk Bong ^a   Tsuji, Nobuhiro ^b   Minamino, Yoritoshi ^b  

^a Korea Institute of Machine and Materials   (South Korea)

^b OSAKA UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM SHEET; ANNEALING; CRYSTAL MICROSTRUCTURE; FRICTION; METALLOGRAPHIC MICROSTRUCTURE; MORPHOLOGY; PLASTIC DEFORMATION; ROLL BONDING; SCANNING ELECTRON MICROSCOPY; STRAIN; TEXTURES; TRANSMISSION ELECTRON MICROSCOPY;

ALUMINUM ALLOY SHEETS; DEFORMATION TEXTURES; SEVERE PLASTIC DEFORMATION; TEXTURE DISTRIBUTION;

ALUMINUM ALLOYS;

EID: 28544443489     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-005-0086-3     Document Type: Article

References (44)

1. N. Tsuji, Y. Saito, S.H. Lee, and Y. Minamino: Adv. Eng. Mater., 2003, vol. 5, pp. 338-44.
2. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47, pp. 579-83.
3. Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, and R.G. Hong: Scripta Mater., 1998, vol. 39, pp. 1221-27.
4. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: J. Jpn. Inst. Met., 1999, vol. 63, pp. 790-95.
5. N. Tsuji, R. Ueji, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 69-76.
6. N. Tsuji, Y. Saito, H. Utsunomiya, and S. Tanigawa: Scripta Mater., 1999, vol. 40, pp. 795-800.
7. N. Tsuji, T. Iwata, M. Sato, S. Fujimoto, and Y. Minamino: Sci. Technol. Adv. Mater., 2004, vol. 5, pp. 173-80.
8. N. Tsuji, K. Shiotsuki, and Y. Saito: Mater. Trans. JIM, 1999, vol. 40, pp. 765-71.
9. N. Tsuji, K. Shiotsuki, H. Utsunomiya, and Y. Saito: Mater. Sci. Forum, 1999, vols. 304-306, pp. 73-78.
10. S.H. Lee, Y. Saito, T. Sakai, H. Utsunomiya, and N. Tsuji: Proc. 2nd Int. Conf. on Light Materials for Transportation Systems (LiMAT 2001), Pohang University of Science and Technology, Busan, Korea, 2001, pp. 635-40.
11. Z.P. Xing, S.B. Kang, and H.W. Kim: Scripta Mater., 2001, vol. 45, pp. 597-604.
12. Z.P. Xing, S.B. Kang, and H.W. Kim: Metall. Mater. Trans. A, 2002, vol. 33A, pp, 1521-30.
13. S.H. Lee, Y. Saito, T. Sakai, H. Utsunomiya, and N. Tsuji: Mater. Trans. JIM, 1999, vol. 40, pp. 1422-28.
14. S.H. Lee, Y. Saito, T. Sakai, H. Utsunomiya, and N. Tsuji: Mater. Sci. Forum, 2000, vols. 331-333, pp. 1169-74.
15. T. Sakai, Y. Saito, T. Kanzaki, N. Tamaki, and N. Tsuji: J. JCBRA, 2001, vol. 40, pp. 213-17.
16. K. Inoue, N. Tsuji, and Y. Saito: Proc. Int. Symp. on Ultrafine Grained Steels (ISUGS-2001), ISIJ, Fukuoka, Japan, 2001, pp. 126-29.
17. N. Tsuji, R. Ueji, Y. Ito, and Y. Saito: Proc. 21st Risø Int. Symp. on Materials Science, Risø National Laboratory, Roskilde, Denmark, 2000, pp. 607-16.
18. X. Huang, N. Tsuji, N. Hansen, and Y. Minamino: Mater. Sci. Eng. A, 2003, vol. A340, pp. 265-71.
19. N. Tsuji, T. Toyoda, Y. Minamino, Y. Koizumi, M. Komatsu, and T. Yamane: Mater. Sci. Eng. A, 2003, vol. A350, pp. 108-16.
20. X. Huang, N. Tsuji, N. Hansen, and Y. Minamino: Mater. Sci. Forum, 2002, vols. 408-412, pp. 715-20.
21. N. Tsuji, T. Murakami, and Y. Saito: J. Jpn. Inst. Met., 1999, vol. 63, pp. 243-51.
22. Y. Ito, N. Tsuji, Y. Saito, H. Utsunomiya, and T. Sakai: J. Jpn. Inst. Met., 2000, vol. 64, pp. 429-37.
23. N. Tsuji, Y. Ito, H. Nakashima, F. Yoshida, and Y. Minamino: Mater. Sci. Forum, 2002, vols. 396-402, pp. 423-28.
24. N. Tsuji, Y. Ito, Y. Saito, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893-99.
25. H.W. Kim, S.B. Kang, N. Tsuji, and Y. Minamino: Acta Mater., 2005, vol. 53, pp. 1737-49.
26. O. Engler: Mater. Sci. Forum, 1998, vols. 273-275, pp. 483-88.
27. R.K. Davis, V. Randle, and G.T. Marshall: Acta Mater., 1998, vol. 46, pp. 6021-32.
28. H.W. Kim, S.B. Kang, Z.P. Xing, N. Tsuji, and Y. Minamino: Mater. Sci. Forum, 2002, vols. 408-412, pp. 727-32.
29. P. Liu, T. Thorvaldsson, and G.L. Dunlop: Mater. Sci. Technol., 1986, vol. 2, pp. 1009-18.
30. R.M.K. Young and T.W. Clyne: Scripta Mater. 1981, vol. 15, pp. 1211-16.
31. L.F. Mondolf: Aluminum Alloys, Structure and Properties, Butterworth and Co., London, 1976, pp. 534-36.
32. Z.K. Liu and Y.A. Chang: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1081-95.
33. K. Lucke and O. Engler: Mater. Sci. Technol., 1990, vol. 6, pp. 1113-30.
34. C.H. Choi, J.W. Kwon, K.H. Oh, and D.N. Lee: Acta Mater., 1997, vol. 45, pp. 5119-28.
35. Q. Liu, J. Wert, and N. Hansen: Acta Mater., 2000, vol. 48, pp. 4267-79.
36. I.L. Dillamore and W.T. Robers: Met. Rev., 1965, vol. 10, pp. 271-380.
37. H.O. Asbeck and H. Mecking: Mater. Sci. Eng. A, 1978, vol. A34, pp. 111-19.
38. W. Truszkowski, J. Krol, and B. Major: Metall. Trans. A, 1982, vol. 13A, pp. 665-69.
39. B. Major: Mater. Sci. Technol., 1992, vol. 8, pp. 510-15.
40. A. Duckham, R.D. Knutsen, and O. Engler: Acta Mater., 2001, vol. 49, pp. 2739-49.
41. D.J. Lloyd and D. Kenny: Acta Metall. 1980, vol. 28, pp. 639-49.
42. F.J. Humphreys: Acta Metall., 1977, vol. 25, pp. 1323-44.
43. J. Hirsch and K. Lucke: Acta Metall., 1988, vol. 36, pp. 2863-82.
44. W. Mao: Mater. Sci. Eng. A, 1998, vol. A257, pp. 171-77.