Current status of reconfigurable assembly systems

International Journal of Manufacturing Research

Volumn 2, Issue 3, 2007, Pages 303-328

  Bi, Z M ^a   Wang, Lihui ^a   Lang, Sherman Y T ^a  

^a NATIONAL RESEARCH COUNCIL CANADA   (Canada)

Author keywords

flexible assembly; modular assembly; RAS; Reconfigurable Assembly Systems; robotics and automation; system reconfigurability

Indexed keywords

EID: 57149135707     PISSN: 17500591     EISSN: 17500605     Source Type: Journal    
DOI: 10.1504/IJMR.2007.014727     Document Type: Article

References (96)

1. Abdi, M.R. and Labib, A.W. (2003) ‘A design strategy for reconfigurable manufacturing systems using Analytical Hierarchical Process (AHP): a case study’, International Journal of Production Research, Vol. 41, No. 10, pp.2273-2299.
2. Abdi, M.R. and Labib, A.W. (2004) ‘Grouping and selecting products: the design key of Reconfigurable Manufacturing Systems (RMS)’, International Journal of Production Research, Vol. 42, No. 3, pp.521-546.
3. Ahrens, G. and Pageau, G. (2002) ‘Trends in the robotic simulation industry’, Assembly Automation, Vol. 22, No. 3, pp.230-234.
4. Arai, T. (1993) ‘Future assembly system in automobile industry - human friendly line’, Proceedings of the 1993 International Conference on Assembly, Sydney, Australia, 14-17 November, pp.9-17.
5. Arai, T., Maeda, Y., Kikuchi, H. and Sugi, M. (2002) ‘Automated calibration of robot coordinates for reconfigurable assembly systems’, Annals of the CIRP, Vol. 51, No. 1, pp.5-8.
6. Bandyonpadhya, B.P., Hoshi, T., Latief, T. and Hanada, T. (1993) ‘Development of a fixture-free machining center for machining block-like components’, Journal of Materials Processing Technology, Vol. 39, Nos. 3-4, pp.405-413.
7. Barhak, J., Djurdjanovic, D., Spicer, P. and Katz, R. (2005) ‘Integration of reconfigurable inspection with stream of variations methodology’, International Journal of Machine Tools & Manufacture, Vol. 45, pp.407-419.
8. Becker, R., Grzesiak, A. and Henning, A. (2005) ‘Rethink assembly design’, Assembly Automation, Vol. 25, No. 4, pp.262-266.
9. Bellgran, M. and Johansson, C. (1995) ‘A method for the design of flexible assembly systems’, International Journal of Production Economics, Vol. 41, pp.93-102.
10. Bi, Z.M., Gruver, A.W. and Lang, S.Y.T. (2004) ‘Analysis and synthesis of reconfigurable robotic systems’, Concurrent Engineering: Research and Application, Vol. 12, No. 2, pp.145-153.
11. Bi, Z.M. and Lang, S.Y.T. (2005) ‘Integrated robotic motion planning for mass customization’, Proceedings of the 3rd International CIRP Conference on Reconfigurable Manufacturing, Ann Arbor, USA, 10-12 May, p.S-11.
12. Bi, Z.M., Lang, S.Y.T., Shen, W. and Wang, L. (2007) ‘Reconfigurable manufacturing systems: the state of the art’, International Journal of Production Research, in press.
13. Bi, Z.M. and Zhang, W.J. (2001) ‘Modularity technology in manufacturing: taxonomy and issues’, International Journal of Advanced Manufacturing Technology, Vol. 8, No. 5, pp.381-390.
14. Blackenfelt, M. and Stake, R.B. (1998) ‘Modularity in the context of product structuring - a survey’, The Second Nord Design Seminar, KTH, Stockholm, 26-28 August.
15. Bodine, W.E. (1998) ‘Making agile assembly profitable’, Manufacturing Engineering, Vol. 121, No. 4, pp.60-68.
16. Bourn, W. (2001) ‘Modular assembly: more a process than an engineering technique’, Assembly Automation, Vol. 21, No. 1, pp.51-54.
17. Bukchin, J., Darel, E. and Rubinovitz, J. (1997) ‘Team-oriented assembly system design: a new approach’, International Journal of Production Economics, Vol. 51, pp.47-57.
18. Cecil, J., Casquez, D. and Powell, D. (2005) ‘A review of gripping and manipulation techniques for micro-assembly application’, International Journal of Production Research, Vol. 43, No. 4, pp.819-828.
19. Chen, I-M. (2001) ‘Rapid response manufacturing through a rapidly reconfigurable robotic workcell’, Robotics and Computer Integrated Manufacturing, Vol. 17, pp.199-213.
20. Correa, H.L. (2001) ‘Agile manufacturing as the 21st century strategy for improving manufacturing competitiveness’, in A. Gunasekaran (Ed.) Agile Manufacturing: The 21st Century Competitive Strategy, Elsevier, Amsterdam.
21. Degaspari, J. (2002) ‘All in the family’, Mechanical Engineering, February, pp.56-58.
22. Edmondson, N.F. and Redford, A.H. (2002) ‘Generic flexible assembly system design’, Assembly Automation, Vol. 22, No. 2, pp.139-152.
23. Faulkner, D., Levy, B. and Garner, T. (1999) ‘Open-architecture platforms’, Circuits Assembly, January, pp.50-55.
24. Feldmann, K. and Slama, S. (2001) ‘Highly flexible assembly - scope and justification’, Annals of the CIRP, Vol. 50, No. 2, pp.489-498.
25. Fralix, M.T. (2001) ‘From mass production to mass customization’, Journal of Textile and Apparel, Technology and Management, Vol. 1, No. 2, pp.1-7.
26. Fujimoto, H., Ahmed, A., Iida, Y. and Hanai, M. (2003) ‘Assembly process design for management manufacturing complexities because of product varieties’, International Journal of Flexible Manufacturing Systems, Vol. 15, pp.283-307.
27. Fukuda, T. and Takagawa, I. (2000) ‘Design and control of flexible transfer system’, Proceedings of the 3rd World Congress on Intelligent Control and Automation, 28 June-2 July, pp.17-22.
28. Giusti, F., Santochi, M. and Arioti, A. (1994) ‘A reconfigurable assembly cell for mechanical products’, Annals of the CIRP, Vol. 43, No. 1, pp.1-14.
29. Grondahl, P. and Onori, M. (2000) ‘Standardised flexible automatic assembly - evaluating the mark IV approach’, Assembly Automation, Vol. 20, No. 3, pp.217-224.
30. Gunnar, E. (1998) ‘Modular function deployment - a method for product modularisation’, Doctoral thesis, Royal Institute of Technology, Stockholm.
31. Handfield, R.B. and Pagell, M.D. (1995) ‘An analysis of the diffusion of flexible manufacturing systems’, International Journal of Production Economics, Vol. 39, pp.243-253.
32. Harrison, R., Colombo, A.W., West, A.A. and Lee, S.M. (2005) ‘Reconfigurable modular automation systems for automotive power-train manufacture’, Proceedings of the 3rd International CIRP Conference on Reconfigurable Manufacturing, Ann Arbor, USA, 10-12 May, Paper Reference No. C-18.
33. Heilala, J. and Voho, P. (1997) ‘Human touch to efficient modular assembly system’, Assembly Automation, Vol. 17, No. 4, pp.298-302.
34. Heilala, J. and Voho, P. (2001) ‘Modular reconfigurable flexible final assembly systems’, Assembly Automation, Vol. 21, No. 1, pp.20-28.
35. Heisel, U. and Meitzner, M. (2003) ‘Process in reconfigurable manufacturing systems’, Second International CAMT Conference, Wroclaw, 20-21 February, pp.129-136.
36. Ho, J.K.L. (2005) ‘A proposed approach for reconfiguration of flexible assembly line systems by motion genes’, International Journal of Production Research, Vol. 43, No. 9, pp.1729-1749.
37. Ho, J.K.L. and Ranky, P.G. (1997) ‘Object oriented modeling and design of reconfigurable conveyors in flexible assembly systems’, International Journal of Computer Integrated Manufacturing, Vol. 10, No. 5, pp.360-379.
38. Holmstedt, P., Martensson, L. and Arnstrom, A. (1997) ‘Cooperation of man and robot assembly - an evaluation of an industrial flexible assembly system’, Annals of the CIRP, Vol. 46, No. 1, pp.11-14.
39. IMTI Inc. (2000) ‘Manufacturing processes & equipment’, 24 July, http://www.imti21.org/resources/docs/Manufacturing%20Processes%20&%20Equipment.pdf.
40. Ji, P., Choi, C.K. and Tu, L. (2002) ‘VDAS: a virtual design and assembly system in a virtual reality environment’, Assembly Automation, Vol. 22, No. 4, pp.337-342.
41. Jorg, S., Langwald, J. and Natale, C. (2000) ‘Flexible robot-assembly using a multi-sensory approach’, Proceedings of the 2001 IEEE International Conference on Robotics and Automation, San Francisco, pp.3687-3694.
42. Kalpakjian, S. (2001) Manufacturing Technology Fundamentals, New York: Addisson-Wesley.
43. Kamrani, A.K. (2003) ‘A template-based engineering methodology for integrated product design and reconfigurable manufacturing layout’, International Journal of Industrial Engineering, Vol. 10, No. 2, pp.147-156.
44. Kochan, A. (2003) ‘GM creates flexible assembly line at its Ellesmere port plant in the UK’, Assembly Automation, Vol. 23, No. 1, pp.32-35.
45. Koren, Y., Heisel, U., Jovane, F., Moriwaki, T., Ulsoy, G. and van Brussel, H. (1999) ‘Reconfigurable manufacturing systems’, Annals of the CIRP, Vol. 48, No. 2, pp.527-540.
46. Kumar, R.L. (1995) ‘An optional view of investments in expansion-flexible manufacturing systems’, International Journal of Production Economics, Vol. 38, pp.281-291.
47. Kuo, C-H., Huang, H-P., Wei, K.C. and Tang, S.H. (1999) ‘System modeling and real-time simulator for highly model-mixed assembly systems’, Transactions of ASME, Journal of Manufacturing System and Automation, Vol. 121, pp.282-289.
48. Laurentis, K.J. and Mavroidis, C. (2004) ‘Rapid fabrication of a non-assembly robotic hand with embedded components’, Assembly Automation, Vol. 24, No. 4, pp.394-405.
49. Lee, G.H. (1997) ‘Reconfigurability consideration design of components and manufacturing systems’, International Journal of Advanced Manufacturing Technology, Vol. 13, pp.376-386.
50. Liu, J. and Yao, Y. (2004) Preliminary Investigation of Virtual Assembly Constructing, Vol. 24, No. 4, pp.379-385.
51. Lohse, N., Hirani, H. and Ratchev, S. (2005) ‘Equipment ontology for modular reconfigurable assembly systems’, Proceedings of the 3rd International CIRP Conference on Reconfigurable Manufacturing, Ann Arbor, USA, 10-12 May, p.S-23.
52. Lohse, N., Ratchew, S. and Valtchanov, G. (2004) ‘Towards web-enabled design of modular assembly systems’, Assembly Automation, Vol. 24, No. 3, pp.270-279.
53. Macnamara, K. (2002) ‘Labour crisis looms unless Ottawa acts’, National Post, 9 December.
54. Maier-Speredelozzi, V. and Hu, S.J. (2002) ‘Selecting manufacturing system configurations based on performance using AHP’, Transactions of NAMRI/SME, Vol. 30, pp.637-643.
55. Manzini, R., Gamberi, M., Regattier, A. and Persona, A. (2004) ‘Framework for designing a flexible cellular assembly system’, Vol. 42, No. 17, pp.3505-3528.
56. Martin, M.V. and Ishii, K. (2002) ‘Design for variety: developing standardized and modularized product platform architectures’, Research in Engineering Design, Vol. 13, pp.213-233.
57. Mehrabi, M.G. and Kannatey-Asibu, E. (2001) ‘Mapping theory: a new approach to design of multi-sensor monitoring of Reconfigurable Machining System (RMS)’, Journal of Manufacturing Systems, Vol. 20, No. 5, pp.297-303.
58. Mehrabi, M.G., Ulsoy, A.G. and Koren, Y. (2000) ‘Reconfigurable manufacturing system and their enabling technologies’, International Journal of Manufacturing Technology and Management, Vol. 1, No. 1, pp.113-130.
59. Mellor, C. (2002) ‘Quick-change artists’, The Ontario Technologist, January-February, pp.12-15.
60. Michelini, R.C., Acaccia, G.M., Callegari, M., Molfino, R.M. and Razzoli, R.P. (2001) ‘Computer integrated assembly for cost effective developments’, in C.T. Leondes (Ed.) Computer Aided Design, Engineering and Manufacturing: Systems Techniques and Applications, Vol. II: Computer Integrated Manufacturing, Boca Raton, FL: CRC Press LLC, pp.2.1-2.68.
61. Milberg, J. and Schmidt, M. (1990) ‘Flexible assembly systems - opportunities and challenge for economic production’, Annals of the CIRP, Vol. 39, No. 1, pp.5-8.
62. Moore, P.R., Pu, J., Ng, H.C., Wong, C.B., Chong, S.K., Chen, X., Adolfsson, J., Olofsgard, P. and Lundgren, J.O. (2003) ‘Virtual engineering: an integrated approach to agile manufacturing machinery design and control’, Mechatronics, Vol. 13, pp.1105-1121.
63. Onori, M. (2001) ‘Assembly net: precision assembly technologies for mini and micro products’, Assembly Automation, Vol. 21, No. 2, pp.123-l28.
64. Park, S.C. (2005) ‘A methodology for creating a virtual model for a flexible manufacturing system’, Computers in Industry, Vol. 56, pp.734-746.
65. Qiu, R.G., Joshi, S. and Mcdonnell, P. (2004) ‘An approach to regulating machine sharing in reconfigurable back-end semiconductor manufacturing’, Journal of Intelligent Manufacturing, Vol. 15, pp.579-591.
66. Rampersad, H.K. (1993) ‘The DFA house’, Assembly Automaton, Vol. 13, pp.29-36.
67. Rampersad, H.K. (1995) ‘State of the art in robotic assembly’, Industrial Robot, Vol. 22, No. 2, pp.10-13.
68. Rampersad, H.K. (1996) ‘Integrated and assembly oriented product design’, Integrated Manufacturing Systems, Vol. 7, No. 6, pp.5-15.
69. Ranky, P.G. (2004) ‘Digital, internet-enabled assembly line and factory modeling’, Assembly Automation, Vol. 24, No. 3, pp.247-153.
70. Rooks, B. (2005) ‘Assembly in aerospace features at IEE seminar’, Assembly Automation, Vol. 25, No. 2, pp.108-111.
71. Sandin, E., Fronsh, P. and Onori, M. (2002) ‘A process-oriented product design based on an assembly module platform’, Proceedings of the 2002 IEEE International Conferences on Robotics and Automation, Washington, DC, USA, pp.4179-4184.
72. Sawik, T. (2000) ‘An LP-based approach for loading and routing in a flexible assembly line’, International Journal of Production Economics, Vol. 64, pp.49-58.
73. Seeluangsawat, R. and Bohez, E.L.J. (2004) ‘Integration of JIT flexible manufacturing, assembly and disassembly system using Petri net approach’, Journal of Manufacturing Technology Management, Vol. 15, No. 7, pp.700-714.
74. Sethi, A.K. and Sethi, S.P. (1990) ‘Flexibility in manufacturing: a survey’, International Journal of Flexible Manufacturing Systems, Vol. 2, pp.289-328.
75. Smith, P.G. and Reinertsen, D.G. (1997) Developing Products in Half the Time: New Rules, New Tools, 2nd ed.
76. Sugi, M., Maeda, Y., Aiyama, Y. and Arai, T. (2001) ‘Holonic robot system: a flexible assembly system with high reconfigurability’, Proceeding of the 2001 IEEE International Conference on Robotics and Automation, Seoul, Korea, 21-26 May, pp.799-805.
77. Sugi, M., Maeda, Y., Aiyama, Y., Harada, T. and Arai, T. (2003) ‘A holonic architecture for easy reconfiguration of robotic assembly systems’, IEEE Transactions on Robotics and Automation, Vol. 19, No. 3, pp.457-464.
78. Sunil, V.B. and Pande, S.S. (2004) ‘WebROBOT: internet based robotic assembly planning system’, Computers in Industry, Vol. 54, pp.191-207.
79. Tang, H.P. and Wong, T.N. (2005) ‘Reactive multi-agent system for assembly cell control’, Robotics and Computer Integrated Manufacturing, Vol. 21, pp.87-98.
80. Tang, L., Yip-Hoi, D.M., Koren, Y. and Wang, W. (2004) ‘An AI-based computer-aided reconfiguration planning framework for reconfigurable manufacturing systems’, Proceedings of 2004 ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, 13-20 November, pp.411-423.
81. Tichem, M. (2000) ‘Position report on flexible assembly automation’, Laboratory for Production Engineering and Industrial Organization, Delft University of Technology.
82. Tsaryev, A.M. (2005) ‘The recomposable manufacturing systems life-cycle investigations with automatic multilevel changing of mechatronic modules and units’, Proceedings of the 3rd International CIRP Conference on Reconfigurable Manufacturing, Ann Arbor, USA, 10-12 May, Paper Reference No. M-16.
83. Tseng, M.M. and Du, X. (1998) ‘Design by customers of mass customization products’, CIRP Annals, Vol. 47, No. 1, pp.103-106.
84. Ulrich, K. (1995) ‘The role of product architecture in the manufacturing firm’, Research Policy, Vol. 24, pp.419-440.
85. Wadhwa, S., Rao, K.S. and Chan, F.T.S. (2005) ‘Flexibility-enabled lead-time reduction in flexible systems’, International Journal of Production Research, Vol. 43, No. 15, pp.3131-3162.
86. Walczyk, D.F., Raju, V. and Miller, R. (2000) ‘Fixtureless assembly of sheet metal parts for the aircraft industry’, Proc Instn Mech Engrs, Vol. 214, Part B, pp.173-182.
87. Wang, F., Guang, H.X. and Min, T. (2005a) ‘An agent-based holonic architecture for reconfigurable manufacturing systems’, Lecture Notes in Computer Science, Vol. 3612, Part III, pp.622-627.
88. Wang, Q., Qwen, G.W. and Mileham, A.R. (2005b) ‘Comparison between fixed- and walking-worker assembly lines’, Proc. IMechE, Part B: Journal of Engineering Manufacture, Vol. 219, No. 11, pp.845-848.
89. Webbink, R.F. and Hu, S.J. (2005) ‘Automated generation of assembly system-design solution’, IEEE Transactions on Automation Science and Engineering, Vol. 2, No. 1, pp.32-39.
90. Weber, A. (2004) ‘Is flexibility a myth?’, Assembly, May, pp.50-59.
91. Yahya, N.M. and Muhamad, W.M.W. (2004) ‘Flexible assembly systems’, http://mechanical.kuktem.edu.my/images/mech/WM_Fas.pdf.
92. Yigit, A.S. and Allahverd, A. (2003) ‘Optimal selection of module instances for modular products in reconfigurable manufacturing systems’, International Journal of Production Research, Vol. 41, No. 17, pp.4063-4074.
93. Yu, J., Yin, Y., Sheng, X. and Chen, Z. (2003) ‘Modeling strategies for reconfigurable assembly systems’, Assembly Automation, Vol. 23, No. 3, pp.266-272.
94. Yuan, C. and Ferrira, P. (2003) ‘An integrated rapid prototyping environment for reconfigurable manufacturing systems’, Proceedings of 2003 ASME International Mechanical Engineering Congress, Washington, DC, 15-21 November, pp.737-744.
95. Yusuf, Y.Y., Sarhadi, M. and Gunasekaran, A. (1999) ‘Agile manufacturing: the drivers, concepts and attributes’, International Journal of Production Economics, Vol. 62, pp.33-43.
96. Zhang, W., Freiheit, T. and Yang, H. (2005) ‘Dynamic scheduling in flexible assembly system based on timed Petri nets model’, Robotics and Computer-Integrated Manufacturing, Vol. 21, pp.550-558.