Integration of reconfigurable inspection with stream of variations methodology

International Journal of Machine Tools and Manufacture

Volumn 45, Issue 4-5, 2005, Pages 407-419

  Barhak, Jacob ^a   Djurdjanovic, Dragan ^a   Spicer, Patrick ^a   Katz, Reuven ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

Laser sensors; Metrology; Non contact inspection; Quality control; Reconfigurable manufacturing systems; Root cause diagnostics; Stream of variations methodology

Indexed keywords

COMPRESSIVE STRENGTH; COMPUTATIONAL COMPLEXITY; ENGINE CYLINDERS; INSPECTION; MACHINING; MEASUREMENTS; QUALITY CONTROL; SENSORS;

LASER SENSORS; NON-CONTACT INSPECTION; RECONFIGURABLE MANUFACTURING SYSTEMS; ROOT-CAUSE DIAGNOSTICS; STREAM OF VARIATIONS METHODOLOGY;

MACHINE TOOLS;

EID: 12444249999     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2004.09.011     Document Type: Article

References (41)

1. Y. Koren, and A.G. Ulsoy Vision, principles and impact of reconfigurable manufacturing systems Powertrain International 2002 14 21
2. S.J. Hu Stream of variation theory for automotive-body assembly CIRP Annals - Manufacturing Technology 46 1 1997 1 6
3. F. Blais A review of 20 years of range sensor development Videometrics VII, Proceedings of SPIE-IS&T Electronic Imaging, SPIE 5013 2003 62 76
4. C. Fraser, Automated vision metrology: a mature technology for industrial inspection and engineering surveys, Sixth South East Asian Surveyors Congress Fremantle, WA, 1-6 November, 1999.
5. T. Iborra, B. Alvarez, C. Jimenez, J.M. Fernandez Meroño, C. Fernández, J. Suandiaz, Automated visual inspection (AVI) system for crankshaft production processes, PHOTOMEC'99/ETE'99, Liege, November 1999.
6. T. Iborra, J.M. Fernandez Meroño, C. Fernández, J. Suandiaz, On-line automated visual inspection for quality control within the automobile industry, Proceedings of the QCAV99 - Fifth International Conference on Quality Control by Artificial Vision, Quebec (Canada), May 1999, ISBN 0-9680833-2-3.
7. G.B. Broggiato, F. Campana, S. Gerbino, Shape deviation analysis on sheet-metal parts through reverse engineering techniques, XII ADM International Conference on Design Tools and Methods in Industrial Engineering, September 5-7, 2001, Rimini, Italy.
8. B. Lipshitz, A. Fischer, Verification of scanned engineering parts with CAD models based on discrete curvature estimation, CIRP Second International Conference on Reconfigurable Manufacturing, Ann Arbor, MI, August 20-21, 2003.
9. D. García, J.M. Sebastián, F.M. Sánchez, L.M. Jiménez, J.M. González, 3D inspection system for manufactured machine parts. Machine vision applications in industrial inspection, VII. ISSN 0277-786X and ISBN 0-8194-3123-0. SPIE - The International Society for Optical Engineering, San José, CA, USA, vol. 3652, January 1999, pp. 250-260.
10. R. Katz, M.G. Zuteck, and Y. Koren Reconfigurable inspection machine for machining production lines GPC Proceedings 23 2002 228 235
11. R. Katz, M.G. Zuteck, Y. Koren, Rapid Inspection and error tracing methodology for machining production lines. The Third CIRP International Seminar on Intelligent Computation in Manufacturing Engineering-ICME 2002, 3-5 July 2002, Ischia, Italy.
12. Y. Koren, R. Katz, Reconfigurable apparatus and method for inspection during a manufacturing process, US Patent No. 6,567,162 B2, May 2003.
13. J. Barhak, R. Katz, Rapid non-contact measurements of engine cylinder heads with the reconfigurable inspection machine, The Fourth CIRP International Seminar on Intelligent Computation in Manufacturing Engineering-ICME '04, 30 June-2 July 2004, Sorrento, Italy.
14. J. Jin, and J. Shi State space modeling of sheet metal assembly for dimensional control ASME Journal of Manufacturing Science and Technology 121 4 1999 756 762
15. Y. Ding, D. Ceglarek, J. Shi, Modeling and diagnosis of multistage manufacturing processes. Part I. State Space Model. Japan-USA Symposium, Ann Arbor, MI, 2000.
16. J.A. Camelio, S.J. Hu, Modeling variation propagation of multi-station assembly systems with compliant parts, Proceedings of DETC'02, ASME 2001 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Pittsburgh, PA, September 9-12, 2001, Paper No. DETC2001/DEM-21190.
17. Y. Ding, D. Ceglarek, J. Shi, Modeling and diagnosis of multistage manufacturing processes. Part II. Fault diagnosis. Japan-USA Symposium, Ann Arbor, MI, 2000.
18. Q. Huang, N. Zhou, J. Shi, Stream of variation modeling and diagnosis of multi-station machining processes, in: Proceedings of International Mechanical Engineering Congress and Exposition, Orlando, FL, 2000.
19. D. Djurdjanovic, and J. Ni Linear state space modeling of dimensional machining errors Transactions of NAMRI/SMI 29 2001 541 548
20. D. Djurdjanovic, and J. Ni Dimensional errors of fixtures, locating and measurement datum features in the stream of variation modeling in machining ASME Journal of Manufacturing Science and Engineering 125 2003 716 730
21. S. Zhou, Q. Huang, J. Shi, State space modeling of multi-stage machining systems by using differential motion vector, IEEE Transactions on Robotics and Automation, 19(2), 296-309.
22. Y. Ding, D. Ceglarek, and J. Shi Fault diagnosis of multi-stage manufacturing processes by using state space approach ASME Journal of Manufacturing Science and Engineering 124 2002 313 322
23. Q. Huang, S. Zhou, and J. Shi Diagnosis of multi-operational machining processes by using state-space approach Robotics and Computer Integrated Manufacturing 18 2002 233 239
24. H. Wang, Q. Huang, R. Katz. Multi-operational machining process modeling for sequential root cause identification and measurement reduction, Proceedings of 2004 ASME International Mechanical Engineering Congress and Exposition (IMECE), Anaheim, CA, 2004, Paper No. IMECE2004-59330.
25. D. Ceglarek, and J. Shi Dimensional variation reduction for automotive body assembly Journal of Manufacturing Review 8 1995 139 154
26. S. Zhou, Y. Ding, Y. Chen, and J. Shi Diagnosability study of multistage manufacturing processes based on linear mixed-effects models Technometrics 45 4 2003 312 325
27. S.B. Segall, S. Fricker, and A. Gupta Calibration procedure for the detector array of a reconfigurable inspection machine Japan USA Symposium on Flexible Automation, Hiroshima Japan 3 2002 1197 1202
28. S. Hu, and S.M. Wu Identifying root causes of variation in auto-body assembly using principal component analysis Transactions of NAMRI 20 1992 311 316
29. M. Roan, and S.J. Hu Monitoring and classification of dimensional faults in automotive body assembly International Journal of Flexible Manufacturing Systems 7 2 1995 103 125
30. D. Ceglarek, and J. Shi Fixture failure diagnosis for the autobody assembly using pattern recognition Transactions of ASME, Journal of Engineering for Industry 118 1 1996 55 66
31. K. Yang Improving automotive dimensional quality by using principal component analysis International Journal of Quality and Reliability 12 6 1996 401 409
32. W.J. Rugh Linear System Theory 1996 Prentice Hall Englewood Cliffs, NJ pp. 462-476
33. Y. Ding, J. Shi, and D. Ceglarek Diagnosability analysis of multi-station manufacturing processes ASME Journal of Dynamic Systems, Measurement and Control 124 2002 1 13
34. D. Djurdjanovic, and J. Ni Bayesian approach to measurement scheme analysis in multi-station machining systems Journal of Engineering Manufacture 217 B8 2003 1117 1130
35. D. Djurdjanovic, and J. Ni Measurement scheme analysis in multi-station machining systems Proceedings of International Conference on Frontiers of Design and Manufacturing, Dailian, People's Republic of China 1 2002 372 383
36. D. Khan, Ceglarek, and J. Ni Sensor location optimization for fault diagnosis in multi-fixture assembly systems ASME Journal of Manufacturing Science and Engineering 120 1998 781 792
37. A. Khan, and D. Ceglarek Sensor optimization for fault diagnosis in multi-fixture assembly systems with distributed sensing ASME Journal of Manufacturing Science and Engineering 122 2000 215 226
38. D. Djurdjanovic, and J. Ni Measurement scheme synthesis in multi-station machining systems ASME Journal of Manufacturing Science and Engineering 126 1 2004 178 189
39. R. Mantripragada, and D.E. Whitney Modeling and controlling variation propagation in mechanical assemblies using state transition models IEEE Transactions on Robotics and Automation 15 1 1999 124 140
40. J. Barhak, R. Katz, Interpretation of laser measurements produced by the reconfigurable inspection machine using the virtual ball method, CIRP Second International Conference on Reconfigurable Manufacturing August 20-21 2003, Ann Arbor, MI.
41. J. Barhak, R. Katz, Alignment and measurement extraction procedures for the reconfigurable inspection machine. Technical Report. Engineering Research Center for Reconfigurable Machining Systems (ERC/RMS), The University of Michigan, Ann Arbor.