-
2
-
-
33845193416
-
High-performance base fluid for environmentally adapted lubricants
-
Petterson A. High-performance base fluid for environmentally adapted lubricants. Tribol Int 40 (2007) 638-645
-
(2007)
Tribol Int
, vol.40
, pp. 638-645
-
-
Petterson, A.1
-
3
-
-
56549130108
-
-
Oxford, D. Tribology; 2008, http://www.askoxford.com/concise_oed/tribology?view=uk.
-
Oxford, D. Tribology; 2008, http://www.askoxford.com/concise_oed/tribology?view=uk.
-
-
-
-
5
-
-
0029338858
-
Lightweight materials for automotive applications
-
Cole G.S., and Sherman A.M. Lightweight materials for automotive applications. Mater Character 35 (1995) 3-9
-
(1995)
Mater Character
, vol.35
, pp. 3-9
-
-
Cole, G.S.1
Sherman, A.M.2
-
7
-
-
0032194522
-
Automobile engine tribology-design considerations for efficiency and durability
-
Taylor C.M. Automobile engine tribology-design considerations for efficiency and durability. Wear 221 (1999) 1-8
-
(1999)
Wear
, vol.221
, pp. 1-8
-
-
Taylor, C.M.1
-
8
-
-
0343066738
-
Review of solid mechanics in tribology
-
Tichy J.A., and Meyer D.M. Review of solid mechanics in tribology. Int J Solids Struct 37 (2000) 391-400
-
(2000)
Int J Solids Struct
, vol.37
, pp. 391-400
-
-
Tichy, J.A.1
Meyer, D.M.2
-
9
-
-
0004064636
-
-
Professional Engineering Publishing, London p. 1-7 [chapter 1]
-
Dowson D. History of tribology (1998), Professional Engineering Publishing, London p. 1-7 [chapter 1]
-
(1998)
History of tribology
-
-
Dowson, D.1
-
10
-
-
0348046567
-
Bearings since the stone age
-
Davidson C.S.C. Bearings since the stone age. Engineering 183 (1957) 2-5
-
(1957)
Engineering
, vol.183
, pp. 2-5
-
-
Davidson, C.S.C.1
-
12
-
-
0002950013
-
Wear theory and mechanism
-
Peterson M.B., and Winer W.O. (Eds), ASME, New York
-
Archard J.F. Wear theory and mechanism. In: Peterson M.B., and Winer W.O. (Eds). Wear control handbook (1980), ASME, New York 35-80
-
(1980)
Wear control handbook
, pp. 35-80
-
-
Archard, J.F.1
-
13
-
-
0033084070
-
Environmentally-sensitive design: Leonardo WAS right!
-
Thompson B.S. Environmentally-sensitive design: Leonardo WAS right!. Materials and Design 20 (1999) 23-30
-
(1999)
Materials and Design
, vol.20
, pp. 23-30
-
-
Thompson, B.S.1
-
14
-
-
56549087661
-
Flat Rolling - A General Discussion
-
Lenard J.G. Flat Rolling - A General Discussion. Primer on Flat Rolling (2007) 17-35
-
(2007)
Primer on Flat Rolling
, pp. 17-35
-
-
Lenard, J.G.1
-
15
-
-
1642381109
-
Amontons' Law: From the Molecular to the Macroscopic Scale
-
Gao J., Luedtke W.D., Gourdon D., Ruths M., Israelachvili J.N., Landman U., et al. Amontons' Law: From the Molecular to the Macroscopic Scale. J Phys Chem B 108 11 (2004) 3410-3485
-
(2004)
J Phys Chem B
, vol.108
, Issue.11
, pp. 3410-3485
-
-
Gao, J.1
Luedtke, W.D.2
Gourdon, D.3
Ruths, M.4
Israelachvili, J.N.5
Landman, U.6
-
16
-
-
0004064636
-
-
Professional Engineering Publishing, London p. 97-131 [chapter 7]
-
Dowson D. History of tribology (1998), Professional Engineering Publishing, London p. 97-131 [chapter 7]
-
(1998)
History of tribology
-
-
Dowson, D.1
-
17
-
-
0002955154
-
De la Résistance Causée e dans les Machines
-
Amontons G. De la Résistance Causée e dans les Machines. Mémoires de l'Académie Royale (1699) 257-282
-
(1699)
Mémoires de l'Académie Royale
, pp. 257-282
-
-
Amontons, G.1
-
18
-
-
0002395954
-
The orie des Machines Simples, en ayant regard au Frottement de leurs Parties, et a la Roideur des Cordages
-
Coulomb C.A. The orie des Machines Simples, en ayant regard au Frottement de leurs Parties, et a la Roideur des Cordages. Mem Math Phys X (1785) 161-342
-
(1785)
Mem Math Phys
, vol.X
, pp. 161-342
-
-
Coulomb, C.A.1
-
19
-
-
0004064636
-
-
Professional Engineering Publishing, London p. 287-441 [chapter 10]
-
Dowson D. History of tribology (1998), Professional Engineering Publishing, London p. 287-441 [chapter 10]
-
(1998)
History of tribology
-
-
Dowson, D.1
-
20
-
-
0008530697
-
First report on friction experiments
-
Tower B. First report on friction experiments. Proc. Inst. Mech. Eng. 34(a) (1884) 632-659
-
(1884)
Proc. Inst. Mech. Eng.
, vol.34 a
, pp. 632-659
-
-
Tower, B.1
-
21
-
-
0000996846
-
On the theory of lubrication and its application to Mr. Beauchamp Tower's experiments
-
Reynolds O.O. On the theory of lubrication and its application to Mr. Beauchamp Tower's experiments. Phil Trans R Soc Lond 177 (1886) 157-234
-
(1886)
Phil Trans R Soc Lond
, vol.177
, pp. 157-234
-
-
Reynolds, O.O.1
-
22
-
-
13444272621
-
Friction in machines and the effects of the lubricant
-
Petroff N.P. Friction in machines and the effects of the lubricant. Eng J 71 (1883) 228-279
-
(1883)
Eng J
, vol.71
, pp. 228-279
-
-
Petroff, N.P.1
-
25
-
-
0004088233
-
Electrical contacts
-
Bowden F.P., and Tabor D. (Eds), Springer-Verlag, New York
-
Holm R. Electrical contacts. In: Bowden F.P., and Tabor D. (Eds). The friction and lubrication of solids, Part II (1946), Springer-Verlag, New York
-
(1946)
The friction and lubrication of solids, Part II
-
-
Holm, R.1
-
26
-
-
0014641524
-
The direct measurement of normal and retarded van der Waals forces
-
Tabor D., and Winterton R.H.S. The direct measurement of normal and retarded van der Waals forces. Proc R Soc Lond A312 (1969) 435-450
-
(1969)
Proc R Soc Lond
, vol.A312
, pp. 435-450
-
-
Tabor, D.1
Winterton, R.H.S.2
-
30
-
-
56549098973
-
-
NIH. Total hip replacement; 1994. http://consensus.nih.gov/1994/1994HipReplacement098html.htm.
-
NIH. Total hip replacement; 1994. http://consensus.nih.gov/1994/1994HipReplacement098html.htm.
-
-
-
-
31
-
-
21444440419
-
Prevalence of primary and revision total hip and knee arthroplasty in the United States from 1990 through 2002
-
Kurtz S., Mowat F., Ong K., Chan N., Lau E., and Halpern M. Prevalence of primary and revision total hip and knee arthroplasty in the United States from 1990 through 2002. J Bone Jt Surg [Am] 87 (2005) 1487-1497
-
(2005)
J Bone Jt Surg [Am]
, vol.87
, pp. 1487-1497
-
-
Kurtz, S.1
Mowat, F.2
Ong, K.3
Chan, N.4
Lau, E.5
Halpern, M.6
-
33
-
-
35048823283
-
Future Clinical and economic impact of revision total hip and knee
-
Kurtz S.M., Ong K.L., Schmier J., Mowat F., Saleh K., Dybvik E., et al. Future Clinical and economic impact of revision total hip and knee. J Bone Jt Surg [Am] 89 (2007) 144-151
-
(2007)
J Bone Jt Surg [Am]
, vol.89
, pp. 144-151
-
-
Kurtz, S.M.1
Ong, K.L.2
Schmier, J.3
Mowat, F.4
Saleh, K.5
Dybvik, E.6
-
34
-
-
0742266794
-
New insight into the mechanism of hip prosthesis loosening: effect of titanium debris size on osteoblast function
-
O'Connor D.T., Choi M.G., Kwon S.Y., and Sung K.-L.P. New insight into the mechanism of hip prosthesis loosening: effect of titanium debris size on osteoblast function. J Orthop Res 22 (2004) 229-236
-
(2004)
J Orthop Res
, vol.22
, pp. 229-236
-
-
O'Connor, D.T.1
Choi, M.G.2
Kwon, S.Y.3
Sung, K.-L.P.4
-
35
-
-
0034233057
-
Implant retrieval studies of the wear and loosening of prosthetic joints: a review
-
McGee M.A., Howie D.W., Costi K., Haynes D.R., Wildenauer C.I., Pearcy M.J., et al. Implant retrieval studies of the wear and loosening of prosthetic joints: a review. Wear 241 (2000) 158-165
-
(2000)
Wear
, vol.241
, pp. 158-165
-
-
McGee, M.A.1
Howie, D.W.2
Costi, K.3
Haynes, D.R.4
Wildenauer, C.I.5
Pearcy, M.J.6
-
36
-
-
34548023091
-
Tribo-corrosion properties of cobalt-based medical implant alloys in simulated biological environments
-
Yan Y., Neville A., and Dowson D. Tribo-corrosion properties of cobalt-based medical implant alloys in simulated biological environments. Wear 263 7-12 (2007) 1105-1111
-
(2007)
Wear
, vol.263
, Issue.7-12
, pp. 1105-1111
-
-
Yan, Y.1
Neville, A.2
Dowson, D.3
-
37
-
-
85006577810
-
A review of lubricant conditions for wear simulation in artificial hip joint replacements
-
Brown S.S., and Clarke I.C. A review of lubricant conditions for wear simulation in artificial hip joint replacements. Tribol Trans 49 (2006) 72-78
-
(2006)
Tribol Trans
, vol.49
, pp. 72-78
-
-
Brown, S.S.1
Clarke, I.C.2
-
38
-
-
0028836831
-
The origin of submicron polyethylene wear debris in total hip arthroplasty
-
McKellop H.A., Campbell P., Park S.-H., Schmalzried T.P., Grigoris P., Amstutz H.C., et al. The origin of submicron polyethylene wear debris in total hip arthroplasty. Clin Orthop Relat Res 311 (1995) 3-20
-
(1995)
Clin Orthop Relat Res
, vol.311
, pp. 3-20
-
-
McKellop, H.A.1
Campbell, P.2
Park, S.-H.3
Schmalzried, T.P.4
Grigoris, P.5
Amstutz, H.C.6
-
39
-
-
0029493190
-
Advances in tribology: the materials point of view
-
Czichos H., Klaffke D., Santner E., and Woydt M. Advances in tribology: the materials point of view. Wear 190 (1995) 155-161
-
(1995)
Wear
, vol.190
, pp. 155-161
-
-
Czichos, H.1
Klaffke, D.2
Santner, E.3
Woydt, M.4
-
40
-
-
0008017502
-
Clasification of wear process
-
Peterson M.B., and Winer W.O. (Eds), ASME, New York
-
Peterson M.B. Clasification of wear process. In: Peterson M.B., and Winer W.O. (Eds). Wear control handbook (1980), ASME, New York 9-15
-
(1980)
Wear control handbook
, pp. 9-15
-
-
Peterson, M.B.1
-
42
-
-
0032945469
-
Current concepts review-wear in total hip and knee replacements
-
Schmalzried T.P., and Callaghan J.J. Current concepts review-wear in total hip and knee replacements. J Bone Jt Surg [Am] 81 (1999) 115-136
-
(1999)
J Bone Jt Surg [Am]
, vol.81
, pp. 115-136
-
-
Schmalzried, T.P.1
Callaghan, J.J.2
-
44
-
-
0024330679
-
Aseptic loosening in total hip arthroplasty secondary to osteolysis induced by wear debris from titanium-alloy modular femoral heads
-
Lombardi A.V.J., Mallory T.H., Vaughn B.K., and Drouillard P. Aseptic loosening in total hip arthroplasty secondary to osteolysis induced by wear debris from titanium-alloy modular femoral heads. J Bone Jt Surg [Am] 71-A (1989) 1337-1342
-
(1989)
J Bone Jt Surg [Am]
, vol.71 -A
, pp. 1337-1342
-
-
Lombardi, A.V.J.1
Mallory, T.H.2
Vaughn, B.K.3
Drouillard, P.4
-
45
-
-
0018127363
-
The future of polyethylene
-
Black J. The future of polyethylene. J Bone Jt Surg [Br] 60-B3 (1978) 303-306
-
(1978)
J Bone Jt Surg [Br]
, vol.60 -B3
, pp. 303-306
-
-
Black, J.1
-
46
-
-
0029033366
-
Radiographic measurement of wear in 5 cohorts of patients observed for 5 to 22 years
-
Callaghan J.J., Pedersen D.R., Olejniczak J.P., Goetz D.D., and Johnston R.C. Radiographic measurement of wear in 5 cohorts of patients observed for 5 to 22 years. Clin Orthop Relat Res 317 (1995) 14-18
-
(1995)
Clin Orthop Relat Res
, vol.317
, pp. 14-18
-
-
Callaghan, J.J.1
Pedersen, D.R.2
Olejniczak, J.P.3
Goetz, D.D.4
Johnston, R.C.5
-
47
-
-
0008017502
-
Classification of wear process
-
Peterson M.B., and Winer W.O. (Eds)
-
Peterson M.B. Classification of wear process. In: Peterson M.B., and Winer W.O. (Eds). Wear control handbook (1980) 9-16
-
(1980)
Wear control handbook
, pp. 9-16
-
-
Peterson, M.B.1
-
48
-
-
0003912160
-
-
AAOS, Rosemont, IL, USA
-
Wright T., and Goodman S. Implant wear: the future of total joint replacement. (1995), AAOS, Rosemont, IL, USA
-
(1995)
Implant wear: the future of total joint replacement.
-
-
Wright, T.1
Goodman, S.2
-
49
-
-
0034487831
-
Wear quantification
-
Ravikiran A. Wear quantification. J Tribol (2000) 650-656
-
(2000)
J Tribol
, pp. 650-656
-
-
Ravikiran, A.1
-
50
-
-
0030331545
-
The importance of multidirectional motion on the wear of polyethylene
-
Bragdon C.R., O'Connor D.O., Lowenstein J.D., Jasty M., and Syniuta W.D. The importance of multidirectional motion on the wear of polyethylene. Proc Inst Mech Eng [H] 210 3 (1996) 157-165
-
(1996)
Proc Inst Mech Eng [H]
, vol.210
, Issue.3
, pp. 157-165
-
-
Bragdon, C.R.1
O'Connor, D.O.2
Lowenstein, J.D.3
Jasty, M.4
Syniuta, W.D.5
-
51
-
-
0029725748
-
Mechanistic and morphological origins of ultra-high molecular weight polyethylene wear debris in total joint replacement prostheses
-
Wang A., Stark C., and Dumbleton J.H. Mechanistic and morphological origins of ultra-high molecular weight polyethylene wear debris in total joint replacement prostheses. Proc Inst Mech Eng [H] 210 3 (1996) 141-155
-
(1996)
Proc Inst Mech Eng [H]
, vol.210
, Issue.3
, pp. 141-155
-
-
Wang, A.1
Stark, C.2
Dumbleton, J.H.3
-
53
-
-
56549101943
-
-
ASTM G133-95. Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear. Annual book of ASTM standards, vol. 03.02. West Conshohocken, PA: 2002, pp 558-565.
-
ASTM G133-95. Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear. Annual book of ASTM standards, vol. 03.02. West Conshohocken, PA: 2002, pp 558-565.
-
-
-
-
54
-
-
0035236287
-
New joints for the millennium: wear control in total replacements hip joints
-
Dowson D. New joints for the millennium: wear control in total replacements hip joints. Proc Inst Mech Eng [H] 215 (2001) 335-358
-
(2001)
Proc Inst Mech Eng [H]
, vol.215
, pp. 335-358
-
-
Dowson, D.1
-
55
-
-
34247543032
-
Larger diameter bearings reduce wear in metal-on-metal hip implants
-
Affatato S., Leardini W., Jedenmalm A., Ruggeri O., and Toni A. Larger diameter bearings reduce wear in metal-on-metal hip implants. Clin Orthop Relat Res 456 (2007) 153-158
-
(2007)
Clin Orthop Relat Res
, vol.456
, pp. 153-158
-
-
Affatato, S.1
Leardini, W.2
Jedenmalm, A.3
Ruggeri, O.4
Toni, A.5
-
56
-
-
0034485401
-
A hip joint simulator study using new and physiologically scratched femoral heads with ultra-high molecular weight polyethylene acetabular cups
-
Barbour P.S., Stone M.H., and Fisher J. A hip joint simulator study using new and physiologically scratched femoral heads with ultra-high molecular weight polyethylene acetabular cups. Proc Inst Mech Eng [H] 214 6 (2000) 569-576
-
(2000)
Proc Inst Mech Eng [H]
, vol.214
, Issue.6
, pp. 569-576
-
-
Barbour, P.S.1
Stone, M.H.2
Fisher, J.3
-
57
-
-
0035482621
-
Multi-laboratory simulator studies on effects of serum proteins on PTFE cup wear
-
Clarke I.C., Chan F.W., Essner A., Good V., Kaddick C., Lappalainen R., et al. Multi-laboratory simulator studies on effects of serum proteins on PTFE cup wear. Wear 250 1-12 (2001) 188-198
-
(2001)
Wear
, vol.250
, Issue.1-12
, pp. 188-198
-
-
Clarke, I.C.1
Chan, F.W.2
Essner, A.3
Good, V.4
Kaddick, C.5
Lappalainen, R.6
-
58
-
-
0033630259
-
A comparative joint simulator study of the wear of metal-on-metal and alternative material combinations in hip replacements
-
Goldsmith A.A., Dowson D., Isaac G.H., and Lancaster J.G. A comparative joint simulator study of the wear of metal-on-metal and alternative material combinations in hip replacements. Proc Inst Mech Eng [H] 214 1 (2000) 39-47
-
(2000)
Proc Inst Mech Eng [H]
, vol.214
, Issue.1
, pp. 39-47
-
-
Goldsmith, A.A.1
Dowson, D.2
Isaac, G.H.3
Lancaster, J.G.4
-
59
-
-
27744560273
-
A 12-station anatomic hip joint simulator
-
Saikko V. A 12-station anatomic hip joint simulator. Proc Inst Mech Eng [H] 219 6 (2005) 437-448
-
(2005)
Proc Inst Mech Eng [H]
, vol.219
, Issue.6
, pp. 437-448
-
-
Saikko, V.1
-
61
-
-
0041752388
-
The evaluation of prostheses on joint simulators
-
Dumbleton J.H. (Ed), Elsevier, Amsterdam
-
Dumbleton J.H. The evaluation of prostheses on joint simulators. In: Dumbleton J.H. (Ed). Tribology of natural and artificial joints (1981), Elsevier, Amsterdam 258-322
-
(1981)
Tribology of natural and artificial joints
, pp. 258-322
-
-
Dumbleton, J.H.1
-
62
-
-
0020802399
-
In-vitro measurement of static pressure distribution in synovial joints-Part II: retropatellar surface
-
Ahmed A.M., Burke D.L., and Yu A. In-vitro measurement of static pressure distribution in synovial joints-Part II: retropatellar surface. J. Biomech. Eng. Trans. ASME 105 (1983) 226-236
-
(1983)
J. Biomech. Eng. Trans. ASME
, vol.105
, pp. 226-236
-
-
Ahmed, A.M.1
Burke, D.L.2
Yu, A.3
-
63
-
-
0019632011
-
Wear of artificial joint materials IV
-
Clarke I.C. Wear of artificial joint materials IV. Eng Med 10 4 (1981) 189-198
-
(1981)
Eng Med
, vol.10
, Issue.4
, pp. 189-198
-
-
Clarke, I.C.1
-
65
-
-
34247623494
-
Friction of total hip replacements with different bearings and loading conditions
-
Brockett C., Williams S., Jin Z., Isaac G., and Fisher J. Friction of total hip replacements with different bearings and loading conditions. J Biomed Mater Res Part B: Appl Biomater 81B (2007) 508-515
-
(2007)
J Biomed Mater Res Part B: Appl Biomater
, vol.81 B
, pp. 508-515
-
-
Brockett, C.1
Williams, S.2
Jin, Z.3
Isaac, G.4
Fisher, J.5
-
66
-
-
0033252596
-
A hip joint simulator study using simplified loading and motion cycles generatine physiological wear paths and rates
-
Barbour P.S.M., Stone M.H., and Fisher J. A hip joint simulator study using simplified loading and motion cycles generatine physiological wear paths and rates. Proc Inst Mech Eng [H] 213 (1999) 455-467
-
(1999)
Proc Inst Mech Eng [H]
, vol.213
, pp. 455-467
-
-
Barbour, P.S.M.1
Stone, M.H.2
Fisher, J.3
-
67
-
-
0030627862
-
Frictional heating of bearing materials tested in a hip joint wear simulator
-
Lu Z., and McKellop H. Frictional heating of bearing materials tested in a hip joint wear simulator. Proc Inst Mech Eng [H] 211 1 (1997) 101-108
-
(1997)
Proc Inst Mech Eng [H]
, vol.211
, Issue.1
, pp. 101-108
-
-
Lu, Z.1
McKellop, H.2
-
68
-
-
0032616721
-
Development of a ten-station, multi-axis hip joint simulator
-
Goldsmith A.A., and Dowson D. Development of a ten-station, multi-axis hip joint simulator. Proc Inst Mech Eng [H] 213 4 (1999) 311-316
-
(1999)
Proc Inst Mech Eng [H]
, vol.213
, Issue.4
, pp. 311-316
-
-
Goldsmith, A.A.1
Dowson, D.2
-
69
-
-
0032784606
-
Potential thermal artifacts in hip joint wear simulators
-
Lu Z., McKellop H., Liao P., and Benya P. Potential thermal artifacts in hip joint wear simulators. J Biomed Mater Res 48 4 (1999) 458-464
-
(1999)
J Biomed Mater Res
, vol.48
, Issue.4
, pp. 458-464
-
-
Lu, Z.1
McKellop, H.2
Liao, P.3
Benya, P.4
-
70
-
-
0016534968
-
Wear behaviour of medical engineering materials
-
Beutler H., and Lehmann M. Wear behaviour of medical engineering materials. Wear 33 (1975) 337-350
-
(1975)
Wear
, vol.33
, pp. 337-350
-
-
Beutler, H.1
Lehmann, M.2
-
71
-
-
11744386599
-
A simulator for load bearing joints
-
Dumbleton J.H., Miller D.A., and Miller E.H. A simulator for load bearing joints. Wear 20 (1972) 165-174
-
(1972)
Wear
, vol.20
, pp. 165-174
-
-
Dumbleton, J.H.1
Miller, D.A.2
Miller, E.H.3
-
72
-
-
0036205442
-
Slide track analysis of the relative motion between femoral head and acetabular cup in walking and in hip simulators
-
Saikko V., and Calonius O. Slide track analysis of the relative motion between femoral head and acetabular cup in walking and in hip simulators. J Biomech 35 4 (2002) 455-464
-
(2002)
J Biomech
, vol.35
, Issue.4
, pp. 455-464
-
-
Saikko, V.1
Calonius, O.2
-
73
-
-
0030339155
-
A three-axis hip joint simulator for wear and friction studies on total hip prostheses
-
Saikko V.O. A three-axis hip joint simulator for wear and friction studies on total hip prostheses. Proc Inst Mech Eng [H] 210 3 (1996) 175-185
-
(1996)
Proc Inst Mech Eng [H]
, vol.210
, Issue.3
, pp. 175-185
-
-
Saikko, V.O.1
-
74
-
-
0024040573
-
Design and development of a versatile hip joint simulator and a preliminary assessment of wear and creep in Charnley total replacement hip joints
-
Dowson D., and Jobbins B. Design and development of a versatile hip joint simulator and a preliminary assessment of wear and creep in Charnley total replacement hip joints. Eng Med 17 3 (1988) 111-117
-
(1988)
Eng Med
, vol.17
, Issue.3
, pp. 111-117
-
-
Dowson, D.1
Jobbins, B.2
-
75
-
-
56549118902
-
-
ISO-14242/1. Implants for surgery--Wear of total hip joint prostheses--Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for tests; 2002.
-
ISO-14242/1. Implants for surgery--Wear of total hip joint prostheses--Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for tests; 2002.
-
-
-
-
77
-
-
33748527521
-
Load profile, fluid composition influence the soak behaviour of UHMWPE implants
-
Schwenke T., Schneider E., and Wimmer M.A. Load profile, fluid composition influence the soak behaviour of UHMWPE implants. J ASTM Int 3 8 (2006) 5-10
-
(2006)
J ASTM Int
, vol.3
, Issue.8
, pp. 5-10
-
-
Schwenke, T.1
Schneider, E.2
Wimmer, M.A.3
-
78
-
-
0032616832
-
Type of motion and lubricant in wear simulation of polyethylene acetabular cup
-
Saikko V., and Ahlroos T. Type of motion and lubricant in wear simulation of polyethylene acetabular cup. Proc Inst Mech Eng [H] 213 4 (1999) 301-310
-
(1999)
Proc Inst Mech Eng [H]
, vol.213
, Issue.4
, pp. 301-310
-
-
Saikko, V.1
Ahlroos, T.2
-
79
-
-
0002989262
-
Forces transmitted by joints in the human body. Lubrication and wear in living and artificial human joints
-
Paul J.P. Forces transmitted by joints in the human body. Lubrication and wear in living and artificial human joints. Proc Inst Mech Eng 3J 8 (1966) 181
-
(1966)
Proc Inst Mech Eng
, vol.3 J
, Issue.8
, pp. 181
-
-
Paul, J.P.1
-
81
-
-
56549119410
-
-
ISO-14242/2. Implants for surgery-Wear of total hip joint prostheses. Part 2: Method of measurement; 2000.
-
ISO-14242/2. Implants for surgery-Wear of total hip joint prostheses. Part 2: Method of measurement; 2000.
-
-
-
-
82
-
-
0042230975
-
Effect of lubricant protein concentration on the wear of ultra-high molecular weight polyethylene sliding against a CoCr counterface
-
Saikko V. Effect of lubricant protein concentration on the wear of ultra-high molecular weight polyethylene sliding against a CoCr counterface. Trans ASME 125 (2003) 638-642
-
(2003)
Trans ASME
, vol.125
, pp. 638-642
-
-
Saikko, V.1
-
83
-
-
0346725975
-
The effects of lubricant composition on in vitro wear testing of polymeric acetabular components
-
Wang A., Essner A., and Schmidig G. The effects of lubricant composition on in vitro wear testing of polymeric acetabular components. J Biomed Mater Res B Appl Biomater 68 1 (2004) 45-52
-
(2004)
J Biomed Mater Res B Appl Biomater
, vol.68
, Issue.1
, pp. 45-52
-
-
Wang, A.1
Essner, A.2
Schmidig, G.3
-
84
-
-
4644370329
-
Protein-mediated boundary lubrication in arthroplasty
-
Heubergera M.P., Widmera M.R., Zobeley E., Glockshuber R., and Spencera N.D. Protein-mediated boundary lubrication in arthroplasty. Biomaterials 26 (2005) 1165-1173
-
(2005)
Biomaterials
, vol.26
, pp. 1165-1173
-
-
Heubergera, M.P.1
Widmera, M.R.2
Zobeley, E.3
Glockshuber, R.4
Spencera, N.D.5
-
85
-
-
0036274703
-
Analysis of polyethylene particles produced in different wear conditions in vitro
-
Calonius O., and Saikko V. Analysis of polyethylene particles produced in different wear conditions in vitro. Clin Orthop Relat Res 399 (2002) 219-230
-
(2002)
Clin Orthop Relat Res
, vol.399
, pp. 219-230
-
-
Calonius, O.1
Saikko, V.2
-
86
-
-
56549103476
-
-
ISO/TR-9325. Implants for surgery-Partial and total hip joint prostheses. Recommendations for simulators for evaluation of hip joint prostheses; 1989.
-
ISO/TR-9325. Implants for surgery-Partial and total hip joint prostheses. Recommendations for simulators for evaluation of hip joint prostheses; 1989.
-
-
-
-
87
-
-
56549093854
-
-
ISO-6474. Implants for surgery-Ceramic materials based on high purity alumina; 1994.
-
ISO-6474. Implants for surgery-Ceramic materials based on high purity alumina; 1994.
-
-
-
-
88
-
-
0029831455
-
In vivo wear of three types of metal on metal hip prostheses during two decades of use
-
McKellop H., Park S.H., Chiesa R., Doorn P., Lu B., Normand P., et al. In vivo wear of three types of metal on metal hip prostheses during two decades of use. Clin Orthop Relat Res 329 suppl (1996) S128-S140
-
(1996)
Clin Orthop Relat Res
, vol.329
, Issue.SUPPL
-
-
McKellop, H.1
Park, S.H.2
Chiesa, R.3
Doorn, P.4
Lu, B.5
Normand, P.6
-
89
-
-
0029887658
-
Prospective clinical and joint simulator studies of a new total hip arthroplasty using alumina ceramic heads and cross-linked polyethylene cups
-
Wroblewski B.M., Siney P.D., Dowson D., and Collins S.N. Prospective clinical and joint simulator studies of a new total hip arthroplasty using alumina ceramic heads and cross-linked polyethylene cups. J Bone Joint Surg Br 78 2 (1996) 280-285
-
(1996)
J Bone Joint Surg Br
, vol.78
, Issue.2
, pp. 280-285
-
-
Wroblewski, B.M.1
Siney, P.D.2
Dowson, D.3
Collins, S.N.4
-
91
-
-
0029790088
-
Surface geometry of retrieved McKee-Farrar total hip replacements
-
Kothari M., Bartel D.L., and Booker J.F. Surface geometry of retrieved McKee-Farrar total hip replacements. Clin Orthop Relat Res 329 (1996) S141-S147
-
(1996)
Clin Orthop Relat Res
, vol.329
-
-
Kothari, M.1
Bartel, D.L.2
Booker, J.F.3
-
92
-
-
0029813457
-
Cobalt chromium molybdenum metal combination for modular hip prostheses
-
Schmidt M., Weber H., and Schön R. Cobalt chromium molybdenum metal combination for modular hip prostheses. Clin Orthop Relat Res 329 (1996) S35-S47
-
(1996)
Clin Orthop Relat Res
, vol.329
-
-
Schmidt, M.1
Weber, H.2
Schön, R.3
-
93
-
-
0029790389
-
Wear behavior and histopathology of classic cemented metal on metal hip endoprostheses
-
Willert H.G., Buchhorn G.H., Göbel D., Köster G., Schaffner S., Schenk R., et al. Wear behavior and histopathology of classic cemented metal on metal hip endoprostheses. Clin Orthop Relat Res 329 (1996) S160-S186
-
(1996)
Clin Orthop Relat Res
, vol.329
-
-
Willert, H.G.1
Buchhorn, G.H.2
Göbel, D.3
Köster, G.4
Schaffner, S.5
Schenk, R.6
-
94
-
-
0033775261
-
Clinical and hip simulator comparisons of ceramic-on-polyethylene and metal-on-polyethylene wear
-
Clarke I.C., and Gustafson A. Clinical and hip simulator comparisons of ceramic-on-polyethylene and metal-on-polyethylene wear. Clin Orthop Relat Res 379 (2000) 34-40
-
(2000)
Clin Orthop Relat Res
, vol.379
, pp. 34-40
-
-
Clarke, I.C.1
Gustafson, A.2
-
95
-
-
0025325529
-
Ten-year socket wear in 66 hip arthroplasties. Ceramic versus metal heads
-
Schüller H.M., and Marti R.K. Ten-year socket wear in 66 hip arthroplasties. Ceramic versus metal heads. Acta Orthop Scand 61 3 (1990) 240-243
-
(1990)
Acta Orthop Scand
, vol.61
, Issue.3
, pp. 240-243
-
-
Schüller, H.M.1
Marti, R.K.2
-
96
-
-
0026782890
-
Comparison of alumina-polyethylene and metal-polyethylene in clinical trials
-
Zichner L.P., and Willert H.G. Comparison of alumina-polyethylene and metal-polyethylene in clinical trials. Clin Orthop Relat Res 282 (1992) 86-94
-
(1992)
Clin Orthop Relat Res
, vol.282
, pp. 86-94
-
-
Zichner, L.P.1
Willert, H.G.2
-
97
-
-
0032922181
-
Low-friction arthroplasty of the hip using alumina ceramic and cross-linked polyethylene. A ten-year follow-up report
-
Wroblewski B.M., Siney P.D., and Fleming P.A. Low-friction arthroplasty of the hip using alumina ceramic and cross-linked polyethylene. A ten-year follow-up report. J Bone Jt Surg Br 81 (1999) 54-55
-
(1999)
J Bone Jt Surg Br
, vol.81
, pp. 54-55
-
-
Wroblewski, B.M.1
Siney, P.D.2
Fleming, P.A.3
-
98
-
-
0032778766
-
Ceramic bearing surfaces
-
Skinner H.B. Ceramic bearing surfaces. Clin Orthop Relat Res 369 (1999) 83-91
-
(1999)
Clin Orthop Relat Res
, vol.369
, pp. 83-91
-
-
Skinner, H.B.1
-
99
-
-
0028013728
-
Long-term results of uncemented alumina acetabular implants
-
Boehler M., Knahr K., Plenk H.J., Walter A., Salzer M., and Schreiber V. Long-term results of uncemented alumina acetabular implants. J Bone Jt Surg Br 76 1 (1994) 53-59
-
(1994)
J Bone Jt Surg Br
, vol.76
, Issue.1
, pp. 53-59
-
-
Boehler, M.1
Knahr, K.2
Plenk, H.J.3
Walter, A.4
Salzer, M.5
Schreiber, V.6
-
100
-
-
0035892402
-
Effect of counterface roughness on the wear of conventional and crosslinked ultrahigh molecular weight polyethylene studied with a multi-directional motion pin-on-disk device
-
Saikko V., Calonius O., and Keranen J. Effect of counterface roughness on the wear of conventional and crosslinked ultrahigh molecular weight polyethylene studied with a multi-directional motion pin-on-disk device. J Biomed Mater Res 57 (2001) 506-512
-
(2001)
J Biomed Mater Res
, vol.57
, pp. 506-512
-
-
Saikko, V.1
Calonius, O.2
Keranen, J.3
-
101
-
-
19944388612
-
The clinical relevance of hip joint simulator testing: In vitro and in vivo comparisons
-
Essner A., Schmidig G., and Wang A. The clinical relevance of hip joint simulator testing: In vitro and in vivo comparisons. Wear 259 (2005) 882-886
-
(2005)
Wear
, vol.259
, pp. 882-886
-
-
Essner, A.1
Schmidig, G.2
Wang, A.3
-
102
-
-
0034089470
-
Survival of total hip replacements: A comparison of a randomized trial and a registry
-
Garellick G., Malchau H., and Herberts P. Survival of total hip replacements: A comparison of a randomized trial and a registry. Clin Orthop 375 (2000) 157-167
-
(2000)
Clin Orthop
, vol.375
, pp. 157-167
-
-
Garellick, G.1
Malchau, H.2
Herberts, P.3
-
103
-
-
64249137121
-
First hip arthroplasty register in Italy: 55000 cases and 7 year follow-up
-
Epub ahead of print
-
Stea S., Bordini B., De Clerico M., Petropulacos K., and Toni A. First hip arthroplasty register in Italy: 55000 cases and 7 year follow-up. Int Orthop (2007) Epub ahead of print
-
(2007)
Int Orthop
-
-
Stea, S.1
Bordini, B.2
De Clerico, M.3
Petropulacos, K.4
Toni, A.5
-
104
-
-
56549109057
-
-
Servizio Sanitario Regionale, E.-R. R.I.P.O.2007, https://ripo.cineca.it/.
-
Servizio Sanitario Regionale, E.-R. R.I.P.O.2007, https://ripo.cineca.it/.
-
-
-
-
105
-
-
0017513553
-
New prospects for a prolonged functional life-span of artificial hip joints by using the material combination polyethylene/aluminium oxide ceramin/metal
-
Semlitsch M., Lehmann M., Weber H., Doerre E., and Willert H.G. New prospects for a prolonged functional life-span of artificial hip joints by using the material combination polyethylene/aluminium oxide ceramin/metal. J Biomed Mater Res 11 4 (1977) 537-552
-
(1977)
J Biomed Mater Res
, vol.11
, Issue.4
, pp. 537-552
-
-
Semlitsch, M.1
Lehmann, M.2
Weber, H.3
Doerre, E.4
Willert, H.G.5
-
106
-
-
0014128433
-
Lubrication of animal joints I. The arthrotripsometer
-
Linn F.C. Lubrication of animal joints I. The arthrotripsometer. J Bone Joint Surg Am 49 6 (1967) 1079-1098
-
(1967)
J Bone Joint Surg Am
, vol.49
, Issue.6
, pp. 1079-1098
-
-
Linn, F.C.1
-
107
-
-
0018875099
-
On the true wear rate of ultra high-molecular-weight polyethylene in the total hip prosthesis
-
Rose R.M., Nusbaum H.J., Schneider H., Ries M., Paul I., Crugnola A., et al. On the true wear rate of ultra high-molecular-weight polyethylene in the total hip prosthesis. J Bone Joint Surg Am 62 4 (1980) 537-549
-
(1980)
J Bone Joint Surg Am
, vol.62
, Issue.4
, pp. 537-549
-
-
Rose, R.M.1
Nusbaum, H.J.2
Schneider, H.3
Ries, M.4
Paul, I.5
Crugnola, A.6
-
108
-
-
0016639244
-
"Stiction-friction" of total hip prostheses and its relationship to loosening
-
Simon S.R., Paul I.L., Rose R.M., and Radin E.L. "Stiction-friction" of total hip prostheses and its relationship to loosening. J Bone Joint Surg Am 57 2 (1975) 226-230
-
(1975)
J Bone Joint Surg Am
, vol.57
, Issue.2
, pp. 226-230
-
-
Simon, S.R.1
Paul, I.L.2
Rose, R.M.3
Radin, E.L.4
-
109
-
-
0015629577
-
A comparative study of total hip replacement prostheses
-
Weightman B.O., Paul I.L., Rose R.M., Simon S.R., and Radin E.L. A comparative study of total hip replacement prostheses. J Biomech 6 3 (1973) 299-311
-
(1973)
J Biomech
, vol.6
, Issue.3
, pp. 299-311
-
-
Weightman, B.O.1
Paul, I.L.2
Rose, R.M.3
Simon, S.R.4
Radin, E.L.5
-
110
-
-
0007828922
-
Total human hip joint prostheses-a laboratory study of friction and wear
-
Duff-Barclay I., and Spillman D.T. Total human hip joint prostheses-a laboratory study of friction and wear. Proc Inst Mech Eng 181 3J (1967) 8-15
-
(1967)
Proc Inst Mech Eng
, vol.181
, Issue.3 J
, pp. 8-15
-
-
Duff-Barclay, I.1
Spillman, D.T.2
-
111
-
-
0014571216
-
Friction torque studies of total joint replacements. The use of a simulator
-
Scales J.T., Kelly P., and Goddard D. Friction torque studies of total joint replacements. The use of a simulator. Ann Rheum Dis 28 5 Suppl (1969) 30-35
-
(1969)
Ann Rheum Dis
, vol.28
, Issue.5 SUPPL
, pp. 30-35
-
-
Scales, J.T.1
Kelly, P.2
Goddard, D.3
-
112
-
-
0016824670
-
Experimental methods for the assessment of wear of materials potentially useful for endoprostheses
-
Scales J.T., Mech C.I., and Wright K.W. Experimental methods for the assessment of wear of materials potentially useful for endoprostheses. Acta Orthop Belg 41 Suppl 1 (1) (1975) 160-168
-
(1975)
Acta Orthop Belg
, vol.41
, Issue.SUPPL. 1 1
, pp. 160-168
-
-
Scales, J.T.1
Mech, C.I.2
Wright, K.W.3
-
113
-
-
0014699215
-
A joint simulating machine for load-bearing joints
-
Dowson D., Walker P.S., Longfield M.D., and Wright V. A joint simulating machine for load-bearing joints. Med Biol Eng 8 1 (1970) 37-43
-
(1970)
Med Biol Eng
, vol.8
, Issue.1
, pp. 37-43
-
-
Dowson, D.1
Walker, P.S.2
Longfield, M.D.3
Wright, V.4
-
114
-
-
0015052277
-
The tribology (friction, lubrication and wear) of all-metal artificial hip joints
-
Walker P.S., and Gold B.L. The tribology (friction, lubrication and wear) of all-metal artificial hip joints. Wear 17 (1971) 285-299
-
(1971)
Wear
, vol.17
, pp. 285-299
-
-
Walker, P.S.1
Gold, B.L.2
-
115
-
-
0026998133
-
A simulator study of friction in total replacement hip joints
-
Saikko V. A simulator study of friction in total replacement hip joints. Proc Inst Mech Eng [H] 206 4 (1992) 201-211
-
(1992)
Proc Inst Mech Eng [H]
, vol.206
, Issue.4
, pp. 201-211
-
-
Saikko, V.1
-
116
-
-
0029616092
-
Wear of the polyethylene acetabular cup. The effect of head material, head diameter, and cup thickness studied with a hip simulator
-
Saikko V.O. Wear of the polyethylene acetabular cup. The effect of head material, head diameter, and cup thickness studied with a hip simulator. Acta Orthop Scand 66 6 (1995) 501-506
-
(1995)
Acta Orthop Scand
, vol.66
, Issue.6
, pp. 501-506
-
-
Saikko, V.O.1
-
117
-
-
19944381551
-
Hip simulator wear comparison of metal-on-metal, ceramic-on-ceramic and crosslinked UHMWPE bearings
-
Essner A., Sutton K., and Wang A. Hip simulator wear comparison of metal-on-metal, ceramic-on-ceramic and crosslinked UHMWPE bearings. Wear 259 7 (2005) 992-995
-
(2005)
Wear
, vol.259
, Issue.7
, pp. 992-995
-
-
Essner, A.1
Sutton, K.2
Wang, A.3
-
118
-
-
0031686498
-
Effect of femoral head surface roughness on the wear of ultrahigh molecular weight polyethylene acetabular cups
-
Wang A., Polineni V.K., Stark C., and Dumbleton J.H. Effect of femoral head surface roughness on the wear of ultrahigh molecular weight polyethylene acetabular cups. J Arthroplasty 13 6 (1998) 615-620
-
(1998)
J Arthroplasty
, vol.13
, Issue.6
, pp. 615-620
-
-
Wang, A.1
Polineni, V.K.2
Stark, C.3
Dumbleton, J.H.4
-
119
-
-
56549114433
-
Advanced nanocomposite materials for orthopaedic applications. I: A long-term in vitro wear study of zirconia-toughened alumina
-
Affatato S., Torrecillas R., Taddei P., Rocchi M., Fagnano C., Ciapetti G., et al. Advanced nanocomposite materials for orthopaedic applications. I: A long-term in vitro wear study of zirconia-toughened alumina. J Biomed Mater Res B Appl Biomater (2005)
-
(2005)
J Biomed Mater Res B Appl Biomater
-
-
Affatato, S.1
Torrecillas, R.2
Taddei, P.3
Rocchi, M.4
Fagnano, C.5
Ciapetti, G.6
-
120
-
-
4344667565
-
Alumina hip joints characterized by run-in wear and steady-state wear to 14 million cycles in hip-simulator model
-
Oonishi H., Clarke I.C., Good V., Amino H., and Ueno M. Alumina hip joints characterized by run-in wear and steady-state wear to 14 million cycles in hip-simulator model. J Biomed Mater Res A 70 4 (2004) 523-532
-
(2004)
J Biomed Mater Res A
, vol.70
, Issue.4
, pp. 523-532
-
-
Oonishi, H.1
Clarke, I.C.2
Good, V.3
Amino, H.4
Ueno, M.5
-
121
-
-
0034043773
-
An in vitro investigation of Diamond-Like Carbon as a femoral head coating
-
Affatato S., Frigo M., and Toni A. An in vitro investigation of Diamond-Like Carbon as a femoral head coating. J Biomed Mater Res (Appl Biomater) 53 (2000) 221-226
-
(2000)
J Biomed Mater Res (Appl Biomater)
, vol.53
, pp. 221-226
-
-
Affatato, S.1
Frigo, M.2
Toni, A.3
-
122
-
-
0035144270
-
2 fraction on the wear of ceramic on ceramic hip joint prostheses. A long-term in vitro study
-
2 fraction on the wear of ceramic on ceramic hip joint prostheses. A long-term in vitro study. Biomaterials 22 (2001) 717-723
-
(2001)
Biomaterials
, vol.22
, pp. 717-723
-
-
Affatato, S.1
Goldoni, M.2
Testoni, M.3
Toni, A.4
-
123
-
-
0033641059
-
Ultra-low wear rates for rigid-on-rigid bearings in total hip replacements
-
Clarke I.C., Good V., Williams P., Schroeder D., Anissian L., Stark A., et al. Ultra-low wear rates for rigid-on-rigid bearings in total hip replacements. Proc Inst Mech Eng [H] 214 4 (2000) 331-347
-
(2000)
Proc Inst Mech Eng [H]
, vol.214
, Issue.4
, pp. 331-347
-
-
Clarke, I.C.1
Good, V.2
Williams, P.3
Schroeder, D.4
Anissian, L.5
Stark, A.6
-
124
-
-
0042476688
-
Validation of acetabular cup wear volume based on direct and two-dimensional measurements: hip simulator analysis
-
Mizoue T., Yamamoto K., Masaoka T., Imakiire A., Akagi M., and Clarke I.C. Validation of acetabular cup wear volume based on direct and two-dimensional measurements: hip simulator analysis. J Orthop Sci 8 4 (2003) 491-499
-
(2003)
J Orthop Sci
, vol.8
, Issue.4
, pp. 491-499
-
-
Mizoue, T.1
Yamamoto, K.2
Masaoka, T.3
Imakiire, A.4
Akagi, M.5
Clarke, I.C.6
-
125
-
-
0032079093
-
Analysis of the kinematics of different hip simulators used to study wear of candidate materials for the articulation of total hip arthroplasties
-
Ramamurti B.S., Estok D.M., Jasty M., and Harris W.H. Analysis of the kinematics of different hip simulators used to study wear of candidate materials for the articulation of total hip arthroplasties. J Orthop Res 16 3 (1998) 365-369
-
(1998)
J Orthop Res
, vol.16
, Issue.3
, pp. 365-369
-
-
Ramamurti, B.S.1
Estok, D.M.2
Jasty, M.3
Harris, W.H.4
-
126
-
-
0035876256
-
Wear simulation of total hip prostheses with polyethylene against CoCr, alumina and diamond-like carbon
-
Saikko V., Ahlroos T., Calonius O., and Keranen J. Wear simulation of total hip prostheses with polyethylene against CoCr, alumina and diamond-like carbon. Biomaterials 22 12 (2001) 1507-1514
-
(2001)
Biomaterials
, vol.22
, Issue.12
, pp. 1507-1514
-
-
Saikko, V.1
Ahlroos, T.2
Calonius, O.3
Keranen, J.4
-
127
-
-
0036435261
-
Wear of conventional and cross-linked ultra-high-molecular-weight polyethylene acetabular cups against polished and roughened CoCr femoral heads in a biaxial hip simulator
-
Saikko V., Calonius O., and Keranen J. Wear of conventional and cross-linked ultra-high-molecular-weight polyethylene acetabular cups against polished and roughened CoCr femoral heads in a biaxial hip simulator. J Biomed Mater Res 63 6 (2002) 848-853
-
(2002)
J Biomed Mater Res
, vol.63
, Issue.6
, pp. 848-853
-
-
Saikko, V.1
Calonius, O.2
Keranen, J.3
-
128
-
-
27744599403
-
A hip wear simulator with 100 test stations
-
Saikko V. A hip wear simulator with 100 test stations. Proc Inst Mech Eng [H] 219 5 (2005) 309-318
-
(2005)
Proc Inst Mech Eng [H]
, vol.219
, Issue.5
, pp. 309-318
-
-
Saikko, V.1
-
129
-
-
0033651970
-
A tribological study of UHMWPE acetabular cups and polyurethane compliant layer acetabular cups
-
Smith S.L., Ash H.E., and Unsworth A. A tribological study of UHMWPE acetabular cups and polyurethane compliant layer acetabular cups. J Biomed Mater Res 53 6 (2000) 710-716
-
(2000)
J Biomed Mater Res
, vol.53
, Issue.6
, pp. 710-716
-
-
Smith, S.L.1
Ash, H.E.2
Unsworth, A.3
-
131
-
-
0035068725
-
A five-station hip joint simulator
-
Smith S.L., and Unsworth A. A five-station hip joint simulator. Proc Inst Mech Eng [H] 215 1 (2001) 61-64
-
(2001)
Proc Inst Mech Eng [H]
, vol.215
, Issue.1
, pp. 61-64
-
-
Smith, S.L.1
Unsworth, A.2
-
132
-
-
0033252596
-
A hip joint simulator study using simplified loading and motion cycles generating physiological wear paths and rates
-
Barbour P.S., Stone M.H., and Fisher J. A hip joint simulator study using simplified loading and motion cycles generating physiological wear paths and rates. Proc Inst Mech Eng [H] 213 6 (1999) 455-467
-
(1999)
Proc Inst Mech Eng [H]
, vol.213
, Issue.6
, pp. 455-467
-
-
Barbour, P.S.1
Stone, M.H.2
Fisher, J.3
-
133
-
-
0033065656
-
Effect of molecular weight, calcium stearate, and sterilization methods on the wear of ultra high molecular weight polyethylene acetabular cups in a hip joint simulator
-
McKellop H.A., Shen F.W., Campbell P., and Ota T. Effect of molecular weight, calcium stearate, and sterilization methods on the wear of ultra high molecular weight polyethylene acetabular cups in a hip joint simulator. J Orthop Res 17 3 (1999) 329-339
-
(1999)
J Orthop Res
, vol.17
, Issue.3
, pp. 329-339
-
-
McKellop, H.A.1
Shen, F.W.2
Campbell, P.3
Ota, T.4
-
134
-
-
34249031194
-
Third-body-wear as a risk factor in joint endoprosthetics
-
Oberbach T., Gien W., and Kaddick C. Third-body-wear as a risk factor in joint endoprosthetics. Key Eng Mater 284-286 (2005) 995-998
-
(2005)
Key Eng Mater
, vol.284-286
, pp. 995-998
-
-
Oberbach, T.1
Gien, W.2
Kaddick, C.3
-
135
-
-
38149101715
-
Investigation of aged dispersion ceramics by means of hip simulator
-
Oberbach T., Begand S., Glien W., and Kaddick C. Investigation of aged dispersion ceramics by means of hip simulator. Key Eng Mater 361-363 (2008) 771-774
-
(2008)
Key Eng Mater
, vol.361-363
, pp. 771-774
-
-
Oberbach, T.1
Begand, S.2
Glien, W.3
Kaddick, C.4
-
136
-
-
0035232592
-
Hip simulator wear testing according to the newly introduced standard ISO 14242
-
Kaddick C., and Wimmer M.A. Hip simulator wear testing according to the newly introduced standard ISO 14242. Proc Inst Mech Eng [H] 215 (2001) 429-442
-
(2001)
Proc Inst Mech Eng [H]
, vol.215
, pp. 429-442
-
-
Kaddick, C.1
Wimmer, M.A.2
-
138
-
-
0027015657
-
A five-station hip joint simulator for wear rate studies
-
Saikko V., Paavolainen P., Kleimola M., and Slätis P. A five-station hip joint simulator for wear rate studies. J Eng Med 206 (1992) 195-200
-
(1992)
J Eng Med
, vol.206
, pp. 195-200
-
-
Saikko, V.1
Paavolainen, P.2
Kleimola, M.3
Slätis, P.4
-
139
-
-
33747887186
-
A randomized prospective evaluation of outcomes after total hip arthroplasty using cross-linked marathon and non-cross-linked Enduron polyethylene liners
-
Engh Jr. C.A., Stepniewski A.S., Ginn S.D., Beykirch S.E., Sychterz-Terefenko C.J., Hopper Jr. R.H., et al. A randomized prospective evaluation of outcomes after total hip arthroplasty using cross-linked marathon and non-cross-linked Enduron polyethylene liners. J Arthroplasty 21 6 suppl 2 (2006) 17-25
-
(2006)
J Arthroplasty
, vol.21
, Issue.6 SUPPL. 2
, pp. 17-25
-
-
Engh Jr., C.A.1
Stepniewski, A.S.2
Ginn, S.D.3
Beykirch, S.E.4
Sychterz-Terefenko, C.J.5
Hopper Jr., R.H.6
|