Frictional heating of bearing materials tested in a hip joint wear simulator

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Volumn 211, Issue 1, 1997, Pages 101-108

  Lu, Z ^a,b   McKellop, H ^a  

^a Los Angeles Orthopaedic Hospital   (United States)

^b UNIVERSITY OF SOUTHERN CALIFORNIA   (United States)

Author keywords

Finite element; Frictional heat; Hip prosthesis; Polyethylene; Wear

Indexed keywords

ALUMINA; ATMOSPHERIC TEMPERATURE; CERAMIC MATERIALS; CHROMIUM; CHROMIUM ALLOYS; COBALT; FRICTION; HIP PROSTHESES; LUBRICANTS; NONMETALLIC MATRIX COMPOSITES; POLYETHYLENES; PRECIPITATION (CHEMICAL); PROSTHETICS; PROTEINS; SOLID LUBRICANTS; SURFACE PROPERTIES; THERMOCOUPLES; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES; WEAR OF MATERIALS; ZIRCONIA; COBALT ALLOYS; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; TEMPERATURE MEASUREMENT;

COBALT-CHROMIUM ALLOYS; FRICTIONAL HEAT; MAXIMUM TEMPERATURE; PHYSIOLOGICAL LOADS; PRECIPITATED PROTEINS; PROTEIN PRECIPITATION; STEADY-STATE TEMPERATURE; SURFACE TEMPERATURES;

FINITE ELEMENT METHOD; HIP PROSTHESES;

BOVINE SERUM; HIP JOINT WEAR SIMULATOR;

BIOMATERIAL; POLYETHYLENE DERIVATIVE;

ANIMAL; ARTICLE; AUDIOVISUAL EQUIPMENT; CATTLE; FRICTION; HEAT; HIP; HIP PROSTHESIS; HUMAN; MATERIALS TESTING; OSTEOLYSIS; PHYSIOLOGY; PROSTHESIS FAILURE;

ANIMALS; BIOCOMPATIBLE MATERIALS; CATTLE; FRICTION; HEAT; HIP JOINT; HIP PROSTHESIS; HUMANS; MATERIALS TESTING; MODELS, ANATOMIC; OSTEOLYSIS; POLYETHYLENES; PROSTHESIS FAILURE;

EID: 0030627862     PISSN: 09544119     EISSN: None     Source Type: Journal    
DOI: 10.1243/0954411971534728     Document Type: Article

References (33)

1. Buly, R. L., Huo, M. H., Salvati, E., Brien, W. and Bansal, M. Titanium wear debris in failed cemented total hip arthroplasty: an analysis of 71 cases. J. Arthroplasty, 1992, 7, 315-323.
2. Schmalzried, T. P., Jasty, M. and Harris, W. H. Periprosthetic bone loss in total hip arthroplasty. J. Bone Jt Surg., 1992, 74A, 849-863.
3. Duffy-Barclay, I. and Spillman, D. T. Total human hip joint prostheses-a laboratory study of friction and wear. In Lubrication and Wear in Living and Artificial Human Joints, Proc. Instn Mech. Engrs, 1967, 181, Part 3J, paper 10.
4. Amstutz, H. C. Polymers as bearing materials for total hip replacement: a friction and wear analysis. J. Biomed. Mater. Res., 1968, 3, 547-568.
5. Weightman, B., Simon, S., Paul, I., Rose, R. and Radin, E. Lubrication mechanism of hip joint replacement prostheses. J. Lubrication Technol, April 1972, 131-135.
6. Galante, J. O. and Rostoker, W. Wear in total hip arthroplasty. Acta Orthop. Scand., 1973, Supplement 145.
7. Wright, K. W. J., Dobbs, H. S. and Scales, J. T. Wear studies on prosthetic materials using the pin-on-disc machine. Biomaterials, 1982, 3, 41-48.
8. Cooper, J., Dowson, D. and Fisher, J. Biréfringent studies of polyethylene wear specimens and acetabular cups. Wear, 1991, 151, 391-402.
9. Saikko, V. O., Paavolainen, P. O. and Slätis, P. Wear of the polyethylene acetabular cup. Metal and ceramic heads compared in a simulator. Acta Orthop. Scand., 1993, 64(4), 391-402.
10. McKellop, H., Clarke, I. C., Markolf, K. and Amstutz, H. Wear characteristics of UHMW polyethylene: a method for accurately measuring extremely low wear rates. J. Biomed. Mater. Res., 1978, 12, 895-927.
11. McKellop, H., Clarke, I. C., Markolf, K. and Amstutz, H. Friction and wear properties of polymer, metal and ceramic prosthetic joint materials evaluated on a multichannel screening device. J. Biomed. Mater. Res., 1981,15,619-653.
12. McKellop, H. A. and Rostlund, T. V. The wear behavior of ion-implanted TI-6A1-4V against UHMW polyethylene. J. Biomed. Mater. Res., 1990, 24(11), 1413-1426.
13. Cooper, J., Dowson, D. and Fisher, J. The effect of transfer film and surface roughness on the wear of lubricated ultrahigh molecular weight polyethylene. Clin. Mater., 1993, 14, 295-302.
14. Essner, A., Wang, A., Stark, C. and Dumbleton, J. H. A simulator for the evaluation of total knee replacement wear. Trans. Fifth World Biomaterials Congress, Toronto, 1996, Vol. 1, 580.
15. Clark, I. C. Water and bovine-serum lubrication compared in a simulator PTFE/CoCr wear model. J. Appl. Biomater., 1996, 33, 275-283.
16. Wang, A., Essner, A., Stark, C. and Dumbleton, J. H. Comparison of the size and morphology of UHMWPE wear debris produced by a hip joint simulator under serum and water lubricated conditions. Biomaterials, 1996, 17, 865-871.
17. Schmidt, M. B., Lin, M. and Gréer, K. W. Wear performance of UHMWPE articulated against ion-implanted CoCr. Trans. Soc. for Biomaterials, 21st Annual Meeting, San Francisco, 1995, Vol. XVIII, 230.
18. Walker, P. and Erkman, M. J. Metal-on-metal lubrication in artificial human joints. Wear, 1972, 21, 377-392.
19. McKellop, H., Lu, B. and Benya, P. Friction, lubrication and wear of cobalt-chromium, alumina and zirconia hip prostheses compared on a joint simulator. Trans. 38th Orthop. Res. Soc., 1992, 17, 402.
20. McKellop, H. and Lu, B. Friction, lubrication and wear of polyethylene/metal and polyethylene/ceramic hip prostheses on a joint simulator. Trans. Fourth World Biomaterials Congress, Berlin, 1992, 118.
21. McKellop, H., Park, S. H., Chiesa, R., Doom, P., Lu, B., Normand, P., Grigoris, P. and Amstutz, H. In vivo wear of three types of metal-metal hip prostheses during two decades of use. Clin. Orthop. Rel. Res., 1996, 329S, 128-140.
22. Liao, P., Benya, P. and McKellop, H. Stability of serum as a lubricant in wear simulator tests of prosthetic joints. Trans. Fifth World Biomaterials Congress, Toronto, 1996.
23. Davidson, J. A., Gir, S. and Paul, J. P. Heat transfer analysis of frictional heat dissipation during articulation of femoral implants. J. Biomed. Mater. Res., 1988, 22(A3), 281-309.
24. Benedict, R. P. Fundamentals of Temperature, Pressure and Flow Measurements, 2nd edition, 1977 (John Wiley, New York).
25. McKellop, H. and Clarkc, I. C. Degradation and wear of ultra-high-molecular-weight polyethylene. In Corrosion and Degradation of Implant Materials (Eds A. C. Fraker and C. D. Griffin), 2nd Symposium, Philadelphia, 1985, ASTM special technical publication 859, pp. 351-368 (American Society for Testing and Materials).
26. Wang, A., Stark, C. and Dumbleton, J. H. Role of cyclic plastic deformation in the wear of UHMWPE acetabular cups. J. Biomed. Mater. Res., 1995, 29(5), 619-626.
27. Paul, J. P. Forces transmitted by joints in the human body. In Lubrication and Wear in Living and Artificial Human Joints, Proc. Instn Mech. Engrs, 1967, 181, Part 3J, 8-15.
28. Wrighe, T., Gunsallus, K. L., Rimnac, C., Bartel, D. and Klein, R. W. Design considerations for an acetabular component made from an enhanced form of ultra-high molecular weight polyethylene. Trans. Orthop. Res. Soc., 1991, 16, 248.
29. Harper, C. Handbook of Plastics and Elastomers, 1975 (McGraw-Hill, New York).
30. Davidson, J. A., Schwartz, G. and Lynch, G. Wear, creep and frictional heating of femoral implant articulating surfaces and the effect on long-term performance-Part II, Friction, heating, and torque. J. Biomed. Mater. Res., 1988, 22(A1), 69-91.
31. Bragdon, C. R., O'Connor, D. O., Lowenstein, J. D. and Syniuta, W. D. The importance of multidirectional motion for the wear of polyethylene in the hip. Trans. Fifth World Biomaterials Congress, Toronto, 1996,1-582.
32. Goldsmith, A., Waterman, T. E. and Hirschhorn, H. J. Handbook of Thermophysical Properties of Solid Materials, revised edition, Vols I and III, 1961 (Macmillan, New York).
33. Kumar, P., Oka, M., Ilkeuchi, K., Shlmizu, K., Yamamuro, T., Okumura, H. and Kotoura, Y. Low wear rate of UHMWPE against zirconia (Y-PSZ) ceramic in comparison to alumina ceramic and SUS 316L alloy. J. Biomed. Mater. Res., 1991, 25(7), 813-828.