A hip wear simulator with 100 test stations

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Volumn 219, Issue 5, 2005, Pages 309-318

  Saikko, Vesa ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

High capacity wear test; Hip wear simulation; Ultra high molecular weight polyethylene; Wear data statistics; Wear test validation

Indexed keywords

COMPUTER SIMULATION; LUBRICANTS; ORTHOPEDICS; PROBABILITY DISTRIBUTIONS; STATISTICAL METHODS; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES; WEAR OF MATERIALS; HIP PROSTHESES; MOLECULAR WEIGHT; NORMAL DISTRIBUTION; POLYETHYLENES; TRIBOLOGY;

HIGH CAPACITY WEAR TEST; HIP WEAR SIMULATION; WEAR DATA STATISTICS; WEAR TEST VALIDATION;

HIP PROSTHESES; TESTING;

POLYETHYLENE DERIVATIVE; ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE; ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE;

ARTICLE; EQUIPMENT; EQUIPMENT DESIGN; EVALUATION; HIP PROSTHESIS; INSTRUMENTATION; MATERIALS TESTING; METHODOLOGY; PROSTHESIS FAILURE; REPRODUCIBILITY; SENSITIVITY AND SPECIFICITY; VALIDATION STUDY;

EQUIPMENT DESIGN; EQUIPMENT FAILURE ANALYSIS; HIP PROSTHESIS; MATERIALS TESTING; POLYETHYLENES; PROSTHESIS FAILURE; REPRODUCIBILITY OF RESULTS; SENSITIVITY AND SPECIFICITY;

CONFIDENCE INTERVAL; HIGH CAPACITY WEAR TEST; HIP WEAR SIMULATION; POLYETHYLENE WEAR; STANDARD DEVIATION; STEADY-STATE WEAR; WEAR DATA STATISTICS; WEAR TEST VALIDATION;

EID: 27744599403     PISSN: 09544119     EISSN: 09544119     Source Type: Journal    
DOI: 10.1243/095441105X34301     Document Type: Article

References (24)

1. Saikko, V. A multidirectional motion pin-on-disk wear test method for prosthetic joint materials. J. Biomed. Mater. Res., 1998, 41, 58-64.
2. Atkinson, J. R., Dowson, D., Isaac, G. H., and Wroblewski, B. M. Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints. II: a microscopical study of the surfaces of Charnley polyethylene acetabular sockets. Wear, 1985, 104, 217-224.
3. McKellop, H. A., Campbell, P, Park, S.-H., Schmalzried, T. P., Grigoris, P., Amstutz, H. C., and Sarmiento, A. The origin of submicron polyethylene wear debris in total hip arthroplasty. Clin. Orthop., 1995, 311, 3-20.
4. Mabrey, J. D., Afsar-Keshmiri, A., Engh, G. A., Sychterz, C. J., Wirth, M. A., Rockwood, C. A., and Agrawal, C. M. Standardized analysis of UHMWPE wear particles from failed total joint arthroplasties. J. Biomed. Mater. Res. (Appl. Biomater.), 2002, 63, 475-483.
5. Hall, R. M., Unsworth, A., Siney, P., and Wroblewski, B. M. Wear in retrieved Charnley acetabular sockets. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1996, 210(H), 197-207.
6. McKellop, H. A. and Clarke, I. C. Degradation and wear of ultra-high-molecular-weight polyethylene. In Corrosion and degradation of implant materials: Second Symposium (Eds A. C. Fraker and C. D. Griffin), 1985, ASTM STP 859, pp. 351-368 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
7. Saikko, V. and Ahlroos, T. Type of motion and lubricant in wear simulation of polyethylene acetabular cup. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1999, 213(H), 301-310.
8. Bragdon, C. R., O'Connor, D. O., Lowenstein, J. D., Jasty, M., and Harris, W. H. Development of a new pin-on-disk testing machine for evaluating polyethylene wear. In 24th Annual Meeting of the Society for Biomaterials, San Diego, California, 22-26 April 1998, p. 355.
9. Scholes, S. C. and Unsworth, A. Pin-on-plate studies on the effect of rotation on the wear of metal-on-metal samples. J. Mater. Sci. Mater. Med., 2001, 12, 299-303.
10. Rieker, C. B., Schaffner, S., Schön, R., and Konrad, R. Bi-directional screening wear test with clinical validation. In 10th Conference of the European Orthopaedic Research Society, Wiesbaden, Germany, 13-15 October 2000, p. O-42.
11. Mazzucco, D. and Spector, M. Effects of contact area and stress on the volumetric wear of ultrahigh molecular weight polyethylene. Wear, 2003, 254, 514-522.
12. Besong, A. A. and Fisher, J. Comparative wear of UHMWPE with uni-axial and multi-directional frictional force. In 44th Annual Meeting of the Orthopaedic Research Society, New Orleans, Louisiana, 16-19 March 1998, p. 773.
13. Saikko, V., Calonius, O., and Keränen, J. Effect of counterface roughness on the wear of conventional and crosslinked ultrahigh molecular weight polyethylene studied with a multidirectional motion pin-on-disk device. J. Biomed. Mater. Res., 2001, 57, 506-512.
14. Calonius, O. and Saikko V. Analysis of polyethylene particles produced in different wear conditions in vitro. Clin. Orthop., 2002, 399, 219-230.
15. Scott, M., Widding, K., and Jani, S. Do current wear particle isolation procedures underestimate the number of particles generated by prosthetic bearing components? Wear, 2001, 251, 1213-1217.
16. Sychterz, C. J., Engh Jr, C. A., Swope, S. W., McNulty, D. E., and Engh, C. A. Analysis of prosthetic femoral heads retrieved at autopsy. Clin. Orthop., 1999, 358, 223-234.
17. Puolakka, T. J. S., Keränen, J. T., Juhola, K. A., Pajamäki, K. J. J., Halonen, P J., Nevalainen, J. K., Saikko, V., Lehto, M. U. K., and Järvinen, M. Increased volumetric wear of polyethylene liners with more than 3 years of shelf-life time. Int. Orthop., 2003, 27, 153-159.
18. Saikko, V. and Ahlroos, T. Wear simulation of UHMWPE for total hip replacement with a multidirectional motion pin-on-disk device: effects of counterface material contact area, and lubricant. J. Biomed. Mater. Res., 2000, 49, 147-154.
19. Wang, A., Polineni, V. K., Essner, A., Stark, C., and Dumbleton, J. H. Quantitative analysis of serum degradation and its effect on the outcome of hip joint simulator wear testing on UHMWPE. In the 45th Annual Meeting of the Orthopaedic Research Society, Anaheim, California, 1-4 February 1999, p. 73.
20. Saikko, V. Effect of lubricant protein concentration on the wear of ultra-high molecular weight polyethylene sliding against a CoCr counterface. J. Tribol., 2003, 125, 638-642.
21. Liao, Y.-S., McKellop, H., Lu, Z., Campbell, P., and Benya, P. The effect of frictional heating and forced cooling on the serum lubricant and wear of UHMW polyethylene cups against cobalt-chromium and zirconia balls. Biomaterials, 2003, 24, 3047-3059.
22. Bergmann, G., Deuretzbacher, G., Heller, M., Graichen, F., Rohlmann, A., Strauss, J., and Duda, G. N. Hip contact forces and gait patterns from routine activities. J. Biomech., 2001, 34, 859-871.
23. Saikko, V. and Calonius, O. An improved method of computing the wear factor for total hip prostheses involving the variation of relative motion and contact pressure with location on the bearing surface. J. Biomech., 2003, 36, 1819-1827.
24. Saikko, V. and Keränen, J. Wear simulation of alumina-on-alumina prosthetic hip joints using a multidirectional motion pin-on-disk device. J. Am. Ceram. Soc., 2002, 85, 2785-2791.