A 12-station anatomic hip joint simulator

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Volumn 219, Issue 6, 2005, Pages 437-448

  Saikko, Vesa ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

CoCr; Hip joint simulator; Large diameter metal on metal articulation; Ultra high molecular weight polyethylene; Validation

Indexed keywords

ABSORPTION SPECTROSCOPY; ATOMIC SPECTROSCOPY; BEARINGS (MACHINE PARTS); BURNISHING; COBALT ALLOYS; FILMS; HEATING; LUBRICANTS; LUBRICATION; TRIBOLOGY; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES; WEAR OF MATERIALS; HIP PROSTHESES; JOINT PROSTHESES; METALS; SIMULATORS;

CALF SERUM LUBRICANT; FRICTIONAL HEATING; HIP JOINT STIMULATOR; LARGE DIAMETER METAL-ON-METAL ARTICULATION;

HIP PROSTHESES; POLYETHYLENES;

ATOMIC ABSORPTION SPECTROSCOPY; CALF SERUM LUBRICANT; COCR; FLUID-FILM LUBRICATION; HIP JOINT SIMULATORS; LARGE DIAMETER METAL-ON-METAL ARTICULATION; TRIBOLOGICAL BEHAVIOUR; VALIDATION;

ARTICLE; COMPUTER SIMULATION; EQUIPMENT; EQUIPMENT DESIGN; EVALUATION; HIP; HIP PROSTHESIS; HUMAN; INSTRUMENTATION; JOINT CHARACTERISTICS AND FUNCTIONS; METHODOLOGY; PATHOPHYSIOLOGY; STIMULATION;

COMPUTER SIMULATION; EQUIPMENT DESIGN; EQUIPMENT FAILURE ANALYSIS; HIP JOINT; HIP PROSTHESIS; HUMANS; PHYSICAL STIMULATION; RANGE OF MOTION, ARTICULAR;

EID: 27744560273     PISSN: 09544119     EISSN: 09544119     Source Type: Journal    
DOI: 10.1243/095441105X34419     Document Type: Article

References (40)

1. Saikko, V. and Calonius, O. Slide track analysis of the relative motion between femoral head and acetabular cup in walking and in hip simulators. J. Biomechanics, 2002, 35, 455-464.
2. Calonius, O. and Saikko, V. Slide track analysis of eight contemporary hip simulator designs. J. Biomechanics, 2002, 35, 1439-1450.
3. Calonius, O. and Saikko, V. Force track analysis of contemporary hip simulators. J. Biomechanics, 2003, 36, 1719-1726.
4. Saikko, V. and Calonius, O. An improved method of computing the wear factor for total hip prostheses involving the variation of relative motion and contact pressure with location on the bearing surface. J. Biomechanics, 2003, 36, 1819-1827.
5. Saikko, V. A simulator study of friction in total replacement hip joints. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1992, 206, 201-211.
6. Saikko, V., Paavolainen, P, Kleimola, M., and Slätis, P. A five-station hip joint simulator for wear rate studies. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1992, 206, 195-200.
7. Saikko, V. A three-axis hip joint simulator for wear and friction studies on total hip prostheses. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1996, 210, 175-185.
8. Saikko, V. and Ahlroos, T. Type of motion and lubricant in wear simulation of polyethylene acetabular cup. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1999, 213, 301-310.
9. Saikko, V., Calonius, O., and Keränen, J. Effect of extent of motion and type of load on the wear of polyethylene in a biaxial hip simulator. J. Biomed. Mater. Res. (Appl. Biomater.), 2003, 65B, 186-192.
10. McKellop, H. A. and Clarke, I. C. Degradation and wear of ultra-high-molecular-weight polyethylene. In Corrosion and Degradation of Implant Materials: Second Symposium (Eds A. C. Fraker and C. D. Griffin), ASTM STP 859, 1985, pp. 351-368 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
11. Johnston, R. C. and Smidt, G. L. Measurement of hip-joint motion during walking - evaluation of an electrogoniometric method. J. Bone Jt Surg., 1969, 51A, 1083-1094.
12. Isacson, J., Gransberg, L., and Knutsson, E. Three-dimensional electrogoniometric gait recording. J. Biomechanics, 1986, 19, 627-635.
13. Kadaba, M. P., Ramakrishnan, H. K., and Wootten, M. E. Measurement of lower extremity kinematics during level walking. J. Orthop. Res., 1990, 8, 383-392.
14. Bergmann, G., Deuretzbacher, G., Heller, M., Graichen, F., Rohlmann, A., Strauss, J., and Duda, G. N. Hip contact forces and gait patterns from routine activities. J. Biomechanics, 2001, 34, 859-871.
15. Wang, A., Polineni, V. K., Essner, A., Stark, C., and Dumbleton, J. H. Quantitative analysis of serum degradation and its effect on the outcome of hip joint simulator wear testing on UHMWPE. In Proceedings of the 45th Annual Meeting of the Orthopaedic Research Society, Anaheim, California, USA, 1-4 February 1999, p. 73.
16. Liao, Y.-S., McKellop, H., Lu, Z., Campbell, P, and Benya, P. The effect of frictional heating and forced cooling on the serum lubricant and wear of UHMW polyethylene cups against cobalt-chromium and zirconia balls. Biomaterials, 2003, 24, 3047-3059.
17. Saikko, V., Calonius, O., and Keränen, J. Effect of counterface roughness on the wear of conventional and crosslinked ultrahigh molecular weight polyethylene studied with a multidirectional motion pin-on-disk device. J. Biomed. Mater Res., 2001, 57, 506-512.
18. Saikko, V., Nevalainen, J., Revitzer, H., and Ylinen, P. Metal release from total hip articulations in vitro: substantial from CoCr/CrCr, negligible from CoCr/PE and alumina/PE. Acta Orthop. Scand., 1998, 69, 449-454.
19. Calonius, O. and Saikko V. Analysis of polyethylene particles produced in different wear conditions in vitro. Clin. Orthop., 2002, 399, 219-230.
20. McKellop, H. A., Campbell, P., Park, S.-H., Schmalzried, T. P., Grigoris, P., Amstutz, H. C., and Sarmiento, A. The origin of submicron polyethylene wear debris in total hip arthroplasty. Clin. Orthop., 1995, 311, 3-20.
21. Mabrey, J. D., Afsar-Keshmiri, A., Engh, G. A., Sychterz, C. J., Wirth, M. A., Rockwood, C. A., and Agrawal, C. M. Standardized analysis of UHMWPE wear particles from failed total joint arthroplasties. J. Biomed. Mater. Res. (Appl. Biomater.), 2002, 63, 475-483.
22. Hall, R. M., Unsworth, A., Siney, P., and Wroblewski, B. M. Wear in retrieved Charnley acetabular sockets. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1996, 210, 197-207.
23. Sychterz, C. J., Engh, C. A. Jr., Swope, S. W., McNulty, D. E., and Engh, C. A. Analysis of prosthetic femoral heads retrieved at autopsy. Clin. Orthop., 1999, 358, 223-234.
24. Atkinson, J. R., Dowson, D., Isaac, G. H., and Wroblewski, B. M. Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints. II: a microscopical study of the surfaces of Charnley polyethylene acetabular sockets. Wear, 1985, 104, 217-224.
25. Dowson, D. and Jobbins, B. Design and development of a versatile hip joint simulator and a preliminary assessment of wear and creep in Charnley total replacement hip joints. Engng Medicine, 1988, 17(3), 111-117.
26. Saikko, V., Calonius, O., and Keränen, J. Effect of slide track shape on the wear of ultra-high molecular weight polyethylene in a pin-on-disk wear simulation of total hip prosthesis. J. Biomed. Mater Res. (Appl. Biomater.), 2004, 69B, 141-148.
27. McKellop, H. A., Park, S.-H., Chiesa, R., Doorn, P., Lu, B., Normand, P., Grigoris, P., and Amstutz, H. In vivo wear of 3 types of metal on metal hip prostheses during 2 decades of use. Clin. Orthop., 1996, 329S,128-140.
28. Wimmer, M. A., Sprecher, C., Hauert, R., Täger, G., and Fischer, A. Tribochemical reaction on metal-on-metal hip joint bearings: a comparison between in-vitro and in-vivo results. Wear, 2003, 255, 1007-1014.
29. Smith, S. L., Dowson, D., and Goldsmith, A. A. J. The effect of femoral head diameter upon lubrication and wear of metal-on-metal total hip replacements. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215, 161-170.
30. Doorn, P. F., Mirra, J. H., Campbell, P. A., and Amstutz, H. C. Tissue reaction to metal on metal total hip prostheses. Clin. Orthop., 1996, 329S, 187-205.
31. Firkins, P. J., Tipper, J. L., Saadatzadeh, M. R., Ingham, E., Stone, M. H., Farrar, R., and Fisher J. Quantitative analysis of wear and wear debris from metal-on-metal hip prostheses tested in a physiological hip joint simulator. Biomed. Mater. Engng, 2001, 11, 143-157.
32. Brodner, W., Bitzan, P., Meisinger, V., Kaider, A., Gottsauner-Wolf, F., and Kotz, R. Serum cobalt levels after metal-on-metal total hip arthroplasty. J. Bone Jt Surg., 2003, 85A, 2168-2173.
33. Lhotka, C., Szekeres, T., Steffan, I., Zhuber, K., and Zweymüller, K. Four-year study of cobalt and chromium blood levels in patients managed with two different metal-on-metal total hip replacements. J. Orthop. Res., 2003, 21, 189-195.
34. Rieker, C. B., Schön, R., Liebentritt, G., Gnepf, P. Roberts, P., and Grigoris, P. In-vitro tribology of large metal-on-metal implants - influence of the clearance. In Proceedings of the 50th Annual Meeting of the Orthopaedic Research Society, San Francisco, California, USA, 7-10 March 2004, p. 123.
35. St John, K. R., Zardiackas, L. D., and Poggie, R. A. Wear evaluation of cobalt-chromium alloy for use in a metal-on-metal hip prosthesis. J. Biomed. Mater. Res. (Appl. Biomater.), 2004, 68B, 1-14.
36. ISO 14242-1. Implants for surgery - Wear of Total Hip-joint Prostheses - Part 1: Loading and Displacement Parameters for Wear-testing Machines and Corresponding Environmental Conditions for Test, 2002 (International Standardization Organization, Geneva).
37. Saikko, V. Effect of lubricant protein concentration on the wear of ultra-high molecular weight polyethylene sliding against a CoCr counterface. J. Tribology 2003, 125, 638-642.
38. Bragdon, C. R., O'Connor, D. O.; Lowenstein, J. D., Jasty, M., and Syniuta, W. D. The importance of multidirectional motion on the wear of polyethylene. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1996, 210, 157-165.
39. Kaddick, C. and Wimmer, M. A. Hip simulator wear testing according to the newly introduced standard ISO 14242. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 215, 429-442.
40. Saikko, V. A hip wear simulator with 100 test stations. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2005, in press.