A state of the art review of the finite element modelling of rolling tyres

Iranian Polymer Journal (English Edition)

Volumn 17, Issue 8, 2008, Pages 571-597

  Ghoreishy, Mir Hamid Reza ^a  

^a IRAN POLYMER AND PETROCHEMICAL INSTITUTE   (Iran)

Author keywords

Finite element; Review; Rolling; Simulation; Tyre

Indexed keywords

ENERGY DISSIPATION;

COMPREHENSIVE REVIEWS; COMPUTATIONAL MARKETS; COMPUTER CODES; CURRENT SITUATIONS; ENERGY LOSSES; FINITE ELEMENT; FINITE ELEMENT MODELLING; MODELLING TECHNIQUES; SIMULATION; STATE OF THE ARTS; TEMPERATURE PREDICTIONS; TYRE;

FINITE ELEMENT METHOD;

EID: 54149110402     PISSN: 10261265     EISSN: 10261265     Source Type: Journal    
DOI: None     Document Type: Article

References (106)

1. Rodgers B, Waddell W, Tire engineering. In: Science and Technology of Rubber, Mark JE, Erman B, Eirich FR (Eds), Elsevier Academic, Burlington, Ch 14, 619-661, 2005.
2. Zorowski CF, Mathematical prediction of dynamic tire behavior, Tire Sci Technol, 1, 99-117, 1973.
3. Ridha RA, Analysis for tire mold design, Tire Sci Technol, 2, 195-210, 1974.
4. Kennedy RH, Patel HP, McMinn MS, Radial truck tire inflation analysis: Theory and experiments, Rubber Chem Technol, 54, 751-766, 1981.
5. DeEskinazi J, Ridha RA, Finite element analysis of giant earthmover tires, Rubber Chem Technol, 55, 1044-1054, 1982.
6. Patel HP, Kennedy RH, Nonlinear finite element analysis for composite structures of axisymmetric geometry and loading, Comput Struct, 15, 79-84, 1982.
7. Ghoreishy MHR, A numerical study on the non-linear finite element analysis of a tyre under axisymmetric loading, Iran Polym J, 11, 325-332, 2002.
8. Ghoreishy MHR, Modelling the nonlinear deformation in steel-belted radial tyres under inflation loading, Iran Polym J, 12, 57-65, 2003.
9. DeEskinazi J, Soedel W, Yang TY, Contact of an inflated toroidal membrane with a flat surface as an approach to the tire deflection problem, Tire Sci Technol, 3, 43-61, 1975.
10. Ghoreishy MHR, Finite element analysis of the steel-belted radial tyre with tread pattern under contact load, Iran Polym J, 15, 667-674, 2006.
11. Yanjin G, Guoqun Z, Gang C, FEA and testing studies on static camber performance of the radial tire, J Reinf Plats Compos, 26, 1921-1936, 2007.
12. Padovan J, Paramadilok O, Transient and steady state viscoelastic rolling contact, Comput Struct, 20, 545-553, 1984.
13. Watanabe Y, Mechanism of camber thrust generation in a bias-ply motorcycle tire, Vehicle Sys Dyn, 13, 173-186, 1984.
14. Padovan J, Kennedy R, Three-dimensional travelling load finite element, Proc Soc Auto Eng, Detroit, 1986.
15. Kennedy R, Padovan J, Finite element analysis of a steady-state rotating tire subjected to point load or ground contact, Tire Sci Technol, 15, 243-260, 1987.
16. Nakajima Y, Padovan J, Finite element analysis of steady and transiently moving/rolling nonlinear viscoelastic structure. III: Impact /contact simulations, Comput Struct, 27, 275-286, 1987.
17. Oden JT, Lin TL, Bass JM, Finite element analysis of the general rolling contact problem for a viscoelastic rubber cylinder, Tire Sci Technol, 16, 18-43, 1988.
18. Faria LO, Bass JM, Oden JT, Becker EB, A three-dimensional rolling contact model for a reinforced rubber tire, Tire Sci Technol, 17, 217-233, 1989.
19. Kazempour A, Padovan J, Multibody instantly centered moving Lagrangian observer schemes. Part I: Formulation, Comput Struct, 32, 93-100, 1989.
20. Kazempour A, Padovan J, Multibody instantly centered moving Lagrangian observer schemes. Part II: Application to vehicular simulations, Comput Struct, 32, 101-111, 1989.
21. Faria LO, Oden JT, Yavari B, Tworzydlo WW, Bass JM, Becker EB, Tire modeling by finite elements, Tire Sci Technol, 20, 33-56, 1992.
22. Padovan J, Kazempour A, Tabaddor F, Brockman B, Alternative formulations of rolling contact problems, Finite Elem Anal Des, 11, 275-284, 1992.
23. Mousseau CW, Clark SK, Analytical and experimental study of a tire rolling over a stepped obstacle at low velocity, Tire Sci Technol, 22, 162-181, 1994.
24. Goldstein AA, Finite element analysis of a quasistatic rolling tire model for determination of truck tire forces and moments, Tire Sci Technol, 24, 278-293, 1996.
25. Kao BG, Muthukrishnan M, Tire transient analysis with an explicit Finite Element program, Tire Sci Technol, 25, 230-244, 1997.
26. Kamoulakos A, Kao BG, Transient dynamics of a tire rolling over small obstacles - a finite element approach with PAM-SHOCK, Tire Sci Technol, 26, 84-108, 1998.
27. Koishi M, Kabe K, Shiratori M, Tire cornering simulation using an explicit finite element analysis code, Tire Sci Technol, 26, 109-119, 1998.
28. Negrus EM, Anghelache G, Sorohan S , Tire radial vibrations at high speed of rolling, Proceedings - Society of Automotive Engineers, Detroit, MI, USA, 1998.
29. Zhang Y, Palmer T, Farahani A, Finite element tire model and vibration analysis: A new approach, Tire Sci Technol, 26, 149-172, 1998.
30. Zhang Y, Hazard C, Effects of tire properties and their interaction with the ground and suspension on vehicle dynamic behavior - a finite element approach, Tire Sci Technol, 27, 227-249, 1999.
31. Campanac P, Nonami K, Duhamel D, Application of the vibration analysis of linear systems with time-periodic coefficients to the dynamics of a rolling tyre, J Sound Vib, 231, 37-77, 2000.
32. Mancosu F, Sangalli R, Cheli F, Ciarlariello G, Braghin F, Mathematical-physical 3D tire model for handling/comfort optimization on a vehicle: Comparison with experimental results, Tire Sci Technol, 28, 210-232, 2000.
33. Shiraishi M, Yoshinaga H, Miyori A, Takahashi E, Simulation of dynamically rolling tire, Tire Sci Technol, 28, 264-276, 2000.
34. Kabe K, Koishi M, Tire cornering simulation sing finite element analysis, J Appl Polym Sci, 78, 1566-1572, 2000.
35. Bauchau OA, Rodriguez J, Simulation of wheels in nonlinear, flexible multibody systems, Multibody Syst Dyn, 7, 407-438, 2002.
36. Darnell I, Mousseau R, Hulbert G, Analysis of tire force and moment response during side slip using an efficient finite element model, Tire Sci Technol, 30, 66-82, 2002.
37. Dorsch V, Becker A, Vossen L, Enhanced rubber friction model for finite element simulations of rolling tyres, Plast Rubber Compos, 31, 458-464, 2002.
38. Zhang X, Ganesan R, Rakheja S, Influence of structural and geometric parameters on the interply shear stresses in a radial truck tyre, Heavy Veh Syst, 9, 150-171, 2002.
39. Olatunbosun OA, Burke AM, Finite element modelling of rotating tires in the time domain, Tire Sci Technol, 30, 19-33, 2002.
40. Chang YP, Virtual detection of a radial-ply tire's three-dimensional free vibration modes transmissibility. In: Transportation: Making Tracks for Tomorrow's Transportation, Am Soc Mech Eng, Washington DC, 2003.
41. Duni E, Monfrino G, Saponaro R, Caudano M, Urbinati F, Spinelli M, Pizzuto A, An integrated approach for numerical simulation of full vehicle behaviour during transient dynamic maneuvres on arbitrary obstacles and road surfaces. In: Transportation: Making Tracks for Tomorrow's Transportation, Am Soc Mech Eng, Washington DC, 2003.
42. Liu HH, Tread discontinuities as source of vibration/noise - Transient dynamics of rolling tire, Tire Sci Technol, 31, 204-224, 2003.
43. Sobhanie M, Road load analysis, Tire Sci Technol, 31, 19-38, 2003.
44. Yan X, Nonlinear three-dimensional finite element analysis of steady rolling radial tires, J Reinf Plast Compos, 22, 733-750, 2003.
45. Zheng D, Prediction of tire tread wear with FEM steady state rolling contact simulation, Tire Sci Technol, 31, 189-202, 2003.
46. Chae S, Trivedi M, El-Gindy M, Johansson I, Oijer F, Dynamic response predictions of a truck tire using detailed finite element and rigid ring models, Am Soc Mech Eng, Design Eng Div, Anaheim, 2004.
47. Hall W, Mottram JT, Jones RP, Finite element simulation of a rolling automobile tyre to understand its transient macroscopic behaviour, P I Mech Eng D-J Aut, 218, 1393-1408, 2004.
48. Hall W, Mottram JT, Jones RP, Tire modeling methodology with the explicit finite element code LS-DYNA, Tire Sci Technol, 32, 236-261, 2004.
49. Nackenhorst U, The ALE-formulation of bodies in rolling contact Theoretical foundations and finite element approach, Comput Method Appl M, 193, 4299-4322, 2004.
50. Olatunbosun OA, Bolarinwa O, FE simulation of the effect of tire design parameters on lateral forces and moments, Tire Sci Technol, 32, 146-163, 2004.
51. Tan H-F, Du X-W, Wei Y-T, Yum Y-J, Mechanical properties of cord-rubber composites and tire finite element analysis, Veh Syst Dyn, 40, 161-174, 2004.
52. Cho JR, Kim KW, Jeon DH, Yoo WS, Transient dynamic response analysis of 3-D patterned tire rolling over cleat, Eur J Mech A-Solid, 24, 519531, 2005.
53. Mundl R, Fischer M, Wajroch M, Lee SW, Simulation and validation of the ply steer residual aligning torque induced by the tyre tread pattern, Veh Syst Dyn, 43, 434-443, 2005.
54. Ghoreishy MHR, A 3D finite element model for the parametric study of the belt construction of a steel-belted radial tire, Tire Technol Int Ann Rev, 14-16, 2005.
55. Chae S, El-Gindy M, Allen Ii J, Trivedi M, Oijer F, Johansson I, Dynamic response predictions of quarter-vehicle models using FEA and rigid ring truck tire models, Am Soc Mech Eng, Desi Eng Div, Chicago, 2006.
56. Ghoreishy MHR, Finite element analysis of steady rolling tyre with slip angle: Effect of belt angle, Plast Rubber Compos, 35, 83-90, 2006.
57. Ghoreishy MHR, Steady state rolling analysis of a radial tyre: Comparison with experimental results, P I Mech Eng D-J Aut, 220, 713-721, 2006.
58. Stanciulescu I, Laursen TA, On the interaction of frictional formulations with bifurcation phenomena in hyperelastic steady state rolling calculations, Int J Solids Struct, 43, 2959-2988, 2006.
59. Yanjin G, Guoqun Z, Gang C, Influence of belt cord angle on radial tire under different rolling states, J Reinf Plast Compos, 25, 1059-1077, 2006.
60. Ghoreishy MHR, Malekzadeh M, Rahimi H, A parametric study on the steady state rolling behaviour of a steel-belted radial tyre, Iran Polym J, 16, 539-548, 2007.
61. Liu HH, Load and inflation effects on force and moment of passenger tires using explicit transient dynamics, Tire Sci Technol, 35, 41-55, 2007.
62. Lopez I, Blom REA, Roozen NB, Nijmeijer H, Modelling vibrations on deformed rolling tyres-a modal approach, J Sound Vib, 307, 481-494, 2007.
63. Nakajima Y, Application of optimisation technique to tyre design, Int J Vehicle Des, 43, 49-65, 2007.
64. Cho JC, Jung BC, Prediction of tread pattern wear by an explicit finite element model, Tire Sci Technol, 35, 276-299, 2007.
65. Ghoresihy MHR, Rahimi H, Malekzadeh M, Free-rolling analysis of radial tires with detailed tread patterns, Tire Technol Int Ann Rev, 66-69, 2007.
66. Ghorieshy MHR, Soltani S, Finite element analysis of the steady rolling behavior of a truck tire, ISPST2007, Tehran, Iran, 23th-25th Oct, 2007.
67. Rao KVN, Kumar RK, Simulation of tire dynamic behavior using various finite element techniques, Int J Comput Methods Eng Sci and Mech, 8, 363-372, 2007.
68. Finnveden S, Fraggstedt M, Waveguide finite elements for curved structures, J Sound Vib, 312, 644-671, 2008.
69. Ziefle M, Nackenhorst U, Numerical techniques for rolling rubber wheels: Treatment of inelastic material properties and frictional contact, Comput Mech, 42, 337-356, 2008.
70. Ghoreishy MHR, Finite element modeling of tires with detailed tread pattern, Tire Expo 2007, Cologne, Germany, 13th-15th March, 2007.
71. Sarkar K, Kwon YD, Prevorsek DC, New approach for the thermomechanical analysis of tires by the finite element method, Tire Sci Technol, 38, 261-275, 1987.
72. Weiss M, Tsujimoto S, Yoshinaga H, Belt construction optimization for tire weight reduction using the finite element method, Tire Sci Technol, 21, 120-134, 1993.
73. Luchini JR, Peters JM, Arthur RH, Tire rolling loss computation with the finite element method, Tire Sci Technol, 22, 206-222, 1994.
74. Mc Allen J, Cuitino AM, Sernas V, Numerical investigation of the deformation characteristics and heat generation in pneumatic aircraft tires. Part I. Mechanical modeling, Finite Elem Anal Des, 23, 241-263, 1996.
75. Mc Allen J, Cuitino AM, Sernas V, Numerical investigation of the deformation characteristics and heat generation in pneumatic aircraft tires. Part I. Thermal modeling, Finite Elem Anal Des, 23, 265-290, 1996.
76. Park HC, Youn SK, Song TS, Kim NJ, Analysis of temperature distribution in a rolling tire due to strain energy dissipation, Tire Sci Technol, 25, 214-228, 1997.
77. Song T-S, Lee J-W, Yu H-J, Rolling resistance of tires-an analysis of heat generation, SAE, Detroit, 1998.
78. Ebbott TG, Hohman RL, Jeusette JP, Kerchman V, Tire temperature and rolling resistance prediction with finite element analysis, Tire Sci Technol, 27, 2-21, 1999.
79. Shida Z, Koishi M, Kogure T, Kabe K, Rolling resistance simulation of tires using static finite element analysis, Tire Sci Technol, 27, 84-105, 1999.
80. Futamura S, Goldstein A, A simple method of handling thermomechanical coupling for temperature computation in a rolling tire, Tire Sci Technol, 32, 56-68, 2004.
81. Lin Y-J, Hwang S-J, Temperature prediction of rolling tires by computer simulation, Math Comput Simulat, 67, 235-249, 2004.
82. Narasimha Rao KV, Krishna Kumar R, Bohara PC, A sensitivity analysis of design attributes and operating conditions on tyre operating temperatures and rolling resistance using finite element analysis, P I Mech Eng D-J Aut, 220, 501-517, 2006.
83. Narasimha Rao KV, Kumar RK, Bohara PC, Mukhopadhyay R, A finite element algorithm for the prediction of steady-state temperatures of rolling tires, Tire Sci Technol, 34, 195-214, 2006.
84. Pi WS, Dynamic tire/soil contact surface interaction model for aircraft ground operations, Collection of Technical Papers, AIAA/ASME/ ASCE/AHS Structures, Structural Dynamics Materials Co, Orlando, 321-329, 1985.
85. Pi WS, Dynamic tire/soil contact surface interaction model for aircraft ground operations, J Aircraft, 25, 1038-1044, 1988.
86. Tielking JT, Roberts FL, Tire contact pressure and its effect on pavement strain, J Transp Eng, 113, 56-71, 1987.
87. Mousseau CW, Sayers MW, Effect of tyre and suspension dynamics on wheel spindle forces, Heavy Veh Syst, 6, 46-65, 1999.
88. Shoop S, Haehnel R, Kestler K, Stebbings K, Alger R, Finite element analysis of a wheel rolling in snow, Proc Int Conf Cold Reg Eng, Lincoln, USA, 519-530, 16th-19th Aug, 1999.
89. Seta E, Kamegawa T, Nakajima Y, Prediction of snow/tire interaction using explicit FEM and FVM, Tire Sci Technol, 31, 173-188, 2003.
90. Cho JR, Choi JH, Yoo WS, Kim GJ, Woo JS, Estimation of dry road braking distance considering frictional energy of patterned tires, Finite Elem Anal Des, 42, 1248-1257, 2006.
91. Shoop S, Haehnel R, Janoo V, Harjes D, Liston R, Seasonal deterioration of unsurfaced roads, J Geotech Geoenviron Eng, 132, 852-860, 2006.
92. Kuwajima M, Koishi M, Sugimura J, Contact analysis of tire tread rubber on flat surface with microscopic roughness, Tire Sci Technol, 34, 237-255, 2006.
93. Shoop S, Kestler K, Haehnel R, Finite element modeling of tires on snow, Tire Sci Technol, 34, 2-37, 2006.
94. Seta E, Nakajima Y, Kamegawa T, Ogawa H, Hydroplaning analysis by FEM and FVM: effect of tire rolling and tire pattern on hydroplaning, Tire Sci Technol, 28, 140-156, 2000.
95. Cho JR, Numerical investigation of hydroplaning characteristics of three-dimensional patterned tire, Eur J Mech A Solid, 25, 914-926, 2006.
96. Larsson K, Barrelet S, Kropp W, The modelling of the dynamic behaviour of tyre tread blocks, Appl Acous, 63, 659-677, 2002.
97. Wullens F, Kropp W, A three-dimensional contact model for tyre/road interaction in rolling conditions, Acta Acustica/Acustica, 90, 702-711, 2004.
98. Biermann J, von Estorff O, Petersen S, Schmidt H, Computational model to investigate the sound radiation from rolling tires, Tire Sci Technol, 35, 209-225, 2007.
99. Brinkmeier M, Nackenhorst U, Volk H, A finite element approach to the transient dynamics of rolling tires with emphasis on rolling noise simulation, Tire Sci Technol, 35, 165-182, 2007.
100. 100.Brinkmeier M, Nackenhorst U, Petersen S, von Estorff O, A finite element approach for the simulation of tire rolling noise, J Sound Fib, 309, 20-39, 2008.
101. Brinkmeier M, Nackenhorst U, An approach for large-scale gyroscopic eigenvalue problems with application to high-frequency response of rolling tires, Comput Mech, 41, 503-515, 2008.
102. Chang Y P, El-Gindy M, Streit D A, Influence of tyre loading and inflation pressure on standing waves phenomenon using PAM-SHOCK, Heavy Veh Syst, 10, 86-111, 2003.
103. .Han YH, Becker EB, Fahrenthold EP, Kim DM, Fatigue life prediction for cord-rubber composite tires using a global-local finite element method, Tire Sci Technol, 32, 23-40, 2004.
104. Ok A, Ozupek S, Becker EB, Crack simulation in pneumatic tyres using the finite element method, P I Mech Eng D-J Aut, 221, 157-166, 2007.
105. Jeong KM, Kim KW, Beom HG, Park JU, Finite element analysis of nonuniformity of tires with imperfections, Tire Sci Technol, 35, 226-238, 2007.
106. Kaliske M, Naser B, Meiners C, Inelastic fracture mechanics for tire durability simulations, Tire Sci Technol, 35, 239-250, 2007.