Effect of sandblasting, grinding, polishing and glazing on the flexural strength of two pressable all-ceramic dental materials

Journal of Dentistry

Volumn 32, Issue 2, 2004, Pages 91-99

  Albakry, Mohammad ^a   Guazzato, Massimiliano ^a   Swain, Michael Vincent ^a  

^a UNIVERSITY OF SYDNEY   (Australia)

Author keywords

Biaxial flexural strength; Grinding; Polishing; Sandblasting; Weibull modulus

Indexed keywords

BIOMEDICAL AND DENTAL MATERIALS;

ARTICLE; CERAMICS; ELASTICITY; HEAT TREATMENT; POROSITY; PROCESSING; SCANNING ELECTRON MICROSCOPY; STRENGTH; SURFACE PROPERTY;

EID: 1642471947     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2003.08.006     Document Type: Article

References (50)

1. Tinschert J., Zwez D., Marx R., Anusavice K.J. Structural reliability of Alumina-, feldspar-, leucite-, mica-, and zirconia-based ceramics. Journal of Dentistry. 28:2000;525-539.
2. Ritter J.E. Predicting lifetimes of materials and material structures. Dental Materials. 11:1995;142-146.
3. Kelly R.J. Perspectives on strength. Dental Materials. 11:1995;103-110.
4. Evans A.G. Structural reliability: a processing-dependent phenomenon. Journal of the American Ceramic Society. 65:1982;127-137.
5. Ban S., Anusavice K.J. Influence of test method on failure stress of brittle dental materials. Journal of Dental Research. 69:1990;1791-1799.
6. Bhamra G., Palin W.M., Fleming G.J.P. The effect of surface roughness on the flexural strength of an alumina reinforced all-ceramic crown material. Journal of Dentistry. 30:2002;153-160.
7. Seghi R.R., Daher T., Caputo A. Relative flexural strength of dental restorative ceramics. Dental Materials. 6:1990;181-184.
8. Fischer H., Marx R. Improvement of strength parameters of a leucite-reinforced glass ceramic by dual-ion exchange. Journal of Dental Research. 80:2001;336-339.
9. Fischer H., Maier H.R., Marx R. Improved reliability of leucite reinforced glass by ion exchange. Dental Materials. 16:2000;120-128.
10. Giordano R.A., Campbell S. Flexural strength of feldspathic porcelain treated with ion exchange, overglaze, and polishing. Journal of Prosthetic Dentistry. 71:1994;468-472.
11. Anusavice K.J., Shen C., Vermost B., Chow B. Strengthening of porcelain by ion exchange subsequent to thermal tempering. Dental Materials. 8:1992;149-152.
12. Campbell S.D., Kelly J.R. The influence of surface preparation on the strength and surface microstructure of a cast dental ceramic. International Journal of Prosthodontics. 2:1989;459-466.
13. Seghi R.R., Sorensen J.A. Relative flexural strength of six new ceramic materials. International Journal of Prosthodontics. 8:1995;239-246.
14. Rosenstiel S.F., Gupta P.K., Van Der Sluys R.A., Zimmerman M.H. Strength of a dental glass-ceramic after surface coating. Dental Materials. 9:1993;274-279.
15. Burke F.J.T. Maximising the fracture resistance of dentine-bonded all-ceramic crowns. Journal of Dentistry. 27:1999;169-173.
16. Mclean J.W. High strength ceramics. Quintessence International. 18:1987;97-106.
17. Samuel R., Chandrasekar S. Effect of residual stresses on the fracture of ground ceramics. Journal of the American Ceramic Society. 72:1989;1960-1966.
18. Denry L.L., Rosenstiel S.F., Holloway J.A., Niemiec M.S. Enhanced chemical strengthening of fleldspathic dental porcelain. Journal of Dental Research. 72:1993;1429-1433.
19. Anusavice K.J., Hojjatie B. Effect of thermal tempering on strength and crack propagation behavior of feldspathic porcelain. Journal of Dental Research. 70:1991;1009-1013.
20. Giordano R., Cima M., Pober R. Effect of surface finish on the flexural strength of feldspathic and aluminous dental ceramics. International Journal of Prosthodontics. 8:1995;311-319.
21. Fairhurst C.W., Lockwood P.E., Ringle R.D., Thompson W.O. The effect of glaze on porcelain strength. Dental Materials. 8:1992;203-207.
22. Jager N., Feilzer A.J., Davidson C.L. The influence of surface roughness on porcelain strength. Dental Materials. 16:2000;381-388.
23. Chen H.Y., Hickel R., Setcos J.C., Kunzelman K.H. Effects of surface finish and fatigue testing on the fracture strength of CAD-CAM and pressed ceramic crowns. Journal of Prosthetic Dentistry. 82:1999;468-475.
24. Lawn B.R. Fracture of brittle solids. 2nd ed :1993;Cambridge University Press, Cambridge. pp. 249-306.
25. Wolf D.M., Powers J.M., O'keefe K.L. Bond strength of composite to etched and sandblasted porcelain. American Journal of Dentistry. 6:1993;155-158.
26. Chu F.C.S., Frankel N., Smales R.J. Surface roughness and flexural strength of self-glazed, polished, and reglazed In-Ceram/Vitadur Alpha porcelain laminates. International Journal of Prosthodontics. 13:2000;66-71.
27. Williamson R.T., Kovarik R.E., Mitchell R.J. Effect of grinding, polishing, and overglazing on the flexure strength of a high-leucite feldspathic porcelain. International Journal of Prosthodontics. 9:1996;30-37.
28. Mecholsky J.J. Jr., Freiman S.W., Rice R.W. Effect of grinding on flaw geometry and fracture of glass. Journal of the American Ceramic Society. 60:1977;114-117.
29. Kosmac T., Oblak C., Jevnikar P., Funduk N., Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TPZ zirconia ceramic. Dental Materials. 15:1999;426-433.
30. Brackett S.E., Leary J.M., Turner K.A., Jordan R.D. An evaluation of porcelain strength and the effect of surface treatment. Journal of Prosthetic Dentistry. 61:1989;446-451.
31. Griggs J.A., Thompson J.Y., Anusavice K.J. Effects of flaw size and auto-glaze treatment on porcelain strength. Journal of Dental Research. 75:1996;1414-1417.
32. Kitazaki H., Takahashi H., Hasegawa S., Nishimura F. Effect of amount of grinding on flexural strength of dental ceramics. Journal of Medical and Dental Science. 48:2001;7-13.
33. Baharav M., Laufer B., Pilo R., Cardash H.S. Effect of galze thickness on the fracture toughness and hardness of alumina-reinforced porcelain. Journal of Prosthetic Dentistry. 81:1999;515-519.
34. Denry I.L., Holloway J.A., Tarr L.A. Effect of heat treatment on microcrack healing behavior of a machinable dental ceramic. Journal of Biomedical Materials Research (Applied Biomaterials). 48:1999;791-796.
35. Anusavice K.J., Lee R.B. Effect of firing temperature and water exposure on crack propagation in unglazed porcelain. Journal of Dental Research. 68:1989;1075-1081.
36. Cattell M.J., Knowles J.C., Clarke R.L., Lynch E. The biaxial flexural strength of two pressable ceramic systems. Journal of Dentistry. 27:1999;183-196.
37. Cattell M.J., Palumbo R.P., Knowles J.C., Clarke R.L., Samarawickrama D.Y.D. The effect of veneering and heat treatment on the flexural strength of Empress® 2 ceramics. Journal of Dentistry. 30:2002;161-169.
38. Borom M.P., Turkalo A.M., Doremus R.H. Strength and microstructure in lithium disilicate glass-ceramics. Journal of the American Ceramic Society. 58:1975;385-391.
39. American Society for Testing and Materials. F 394-78: standard test method for biaxial flexure strength (modulus of rupture) of ceramic substrates. Annual Book of ASTM Standards: Vol. 15.02. Refractories; Carbon and Graphite Products; Activated Carbon; Advanced Ceramics; 1995. p. 439-3.
40. Cattell M.J., Clarke R.L., Lynch E.J. The biaxial flexural strength and reliability of four dental ceramics - Part II. Journal of Dentistry. 25:1997;409-414.
41. Gorman C.M., McDevitt W.E., Hill R.G. Comparison of two heat-pressed all-ceramic dental materials. Dental Materials. 16:2000;389-395.
42. Wagner W.C., Chu T.M. Biaxial flexural strength and indentation fracture toughness of three new dental core ceramics. Journal of Prosthetic Dentistry. 76:1996;140-144.
43. Albakry M., Guazzato M., Swain M.V. Biaxial flexural strength, elastic moduli, and X-ray diffraction characterization of three pressable all-ceramic materials. Journal of Prosthetic Dentistry. 89:2003;374-380.
44. Guazzato M., Albakry M., Swain M.V. Mechanical properties of In-Ceram Alumina and In-Ceram Zirconia. International Journal of Prosthodontics. 15:2002;339-346.
45. Albakry M., Gauzzato M., Swain M.V. Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials. Journal of Dentistry. 31:2003;181-188.
46. Kern M., Thompson V.P. Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition. Journal of Prosthetic Dentistry. 74:1994;145-150.
47. Cook R.F., Lawn B.R., Dabbs T.P., Chantikul P. Effect of machining damage on the strength of a glass-ceramic. Communications of the American Ceramic Society. 69:1981;C121-C122.
48. O'Brien W.J. Dental materials and their selection. 3rd ed :2002;Quintessence Publishing Co, Chicago. pp. 210-224.
49. Oh S.C., Dong J.K., Luthy H., Scharer P. Strength and microstructure of IPS Empress 2 glass-ceramic after different treatments. International Journal of Prosthodontics. 13:2000;468-472.
50. Morena R., Lockwood P.E., Fairhurst C.W. Fracture toughness of commercial dental porcelains. Dental Materials. 2:1986;58-62.