Shrinkage stress in light-cured composite resins: Influence of material and photoactivation mode

Dental Materials

Volumn 23, Issue 8, 2007, Pages 911-920

  Charton, Christophe ^a   Colon, Pierre ^b   Pla, Fernand ^a  

^a ENSAIA   (France)

^b UNIVERSITÉ PARIS DESCARTES   (France)

Author keywords

Composite resin; Light curing; Polymerization; Shrinkage stress; Viscous flow

Indexed keywords

ACTIVATION ANALYSIS; COMPOSITE MATERIALS; CURING; POLYMERIZATION; STRESS ANALYSIS; VISCOUS FLOW;

COMPOSITE RESINS; LIGHT CURING; LIGHT CURING DEVICES; SHRINKAGE STRESS;

RESINS;

HALOGEN; RESIN;

ANALYSIS OF VARIANCE; ARTICLE; CHEMISTRY; COMPARATIVE STUDY; DENTAL CARE; DENTAL EQUIPMENT; DENTAL TECHNOLOGY; LIGHT; MATERIALS TESTING; NONPARAMETRIC TEST; PHASE TRANSITION; RADIATION EXPOSURE;

ANALYSIS OF VARIANCE; COMPOSITE RESINS; DENTAL EQUIPMENT; DENTAL STRESS ANALYSIS; HALOGENS; LIGHT; MATERIALS TESTING; PHASE TRANSITION; STATISTICS, NONPARAMETRIC; TECHNOLOGY, DENTAL;

EID: 34250377550     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2006.06.034     Document Type: Article

References (100)

1. Bullard R.H., Leinfelder K.F., and Russell M.C. Effect of coefficient of thermal expansion on microleakage. J Am Dent Assoc 116 (1988) 871-874
2. Rees J.S., and Jacobsen P.H. The polymerisation shrinkage of composite resins. Dent Mater 5 (1989) 41-44
3. Bausch J.R., de Lange K., Davidson C.L., Peters A., and de Gee A.J. Clinical significance of polymerization shrinkage of composite resin. J Prosth Dent 48 (1992) 59-67
4. Davidson C.L., and Feilzer A.J. Polymerization shrinkage and polymerization shrinkage stress in polymer-based restoratives. J Dent 25 (1997) 435-440
5. Peutzfeldt A. Resin composites in dentistry: the monomer systems. Eur J Oral Sci 105 (1997) 97-106
6. O'neil G.A., and Torkelson J.M. Recent advances in the understanding of the gel effect in free radical polymerization. Trends Polym Sci 5 (1997) 349-355
7. Dauvillier B.S., Hübsch P.F., Aarnts M.P., and Feilzer A.J. Modeling of viscoelastic behavior of dental chemically activated resin composites during curing. J Biomed Mater Res 58 (2001) 16-26
8. Naghash H., Okay O., and Yagci Y. Gel formation by chain-crosslinking photopolymerization of methyl methacrylate and ethylene glycol dimethacrylate. Polymers 38 (1997) 1187-1196
9. Feilzer A.J., De Gee A.J., and Davidson C.L. Quantitative determination of stress reduction by flow in composite restorations. Dent Mater 6 (1990) 167-171
10. Davidson C.L. Resisting the curing contraction with adhesive composites. J Prosth Dent 55 (1986) 446-447
11. Dauvillier B.S., Aarnts M.P., and Feilzer A.J. Developments in shrinkage control of adhesive restoratives. J Esthet Dent 12 (2000) 291-299
12. Ferracane J.L., and Mitchem J.C. Relationship between composite contraction stress and leakage in class V cavities. Am J Dent 16 (2003) 239-243
13. Jörgensen K.D., Asmussen E., and Shimokobe H. Enamel damages caused by contracting restorative resins. Scand J Dent Res 83 (1975) 120-122
14. Bowen R.L., Nemoto K., and Rapson J.E. Adhesive bonding of various materials to hard tooth tissues: force developing in composite materials during hardening. J Am Dent Assoc 106 (1983) 475-477
15. Burlet E., Picard B., and Ogolnik R. Étanchéité des obturations aux résines composites. Actualités Odonto-StomatologiquesActualités Odontostomathologiques 17 (1989) 549-560
16. Barnes D.M., Thompson V.P., and Blank L.W. Microleakage of class V composite resin restorations: a comparison between in vivo and in vitro. Oper Dent 18 (1993) 237-245
17. Ferracane J.L., Condon J.R., Pham B., and Mitchem J.C. Relating composite contraction stress to leakage in class V cavities. J Dent Res 78 (1999) 482
18. Eick J.D., and Welch F.H. Polymerization shrinkage of posterior composite resins and its possible influence on postoperative sensitivity. Quint Int 17 (1986) 103-111
19. Camps J., Dejou J., Remusat M., and About I. Factors influencing pulpal response to cavity restorations. Dent Mater 16 (2000) 432-440
20. Sidhu S.K., and Henderson L.J. Dentin adhesives and microleackage in cervical resin composites. Am J Dent 5 (1992) 240-243
21. Brännström M. Communication between the oral cavity and dental pulp associated with restorative treatment. Oper Dent 9 (1984) 57-68
22. Lutz F., Krejci I., and Barbakow F. Quality and durability of marginal adaptation in bonded composite restorations. Dent Mater 10 (1991) 107-113
23. Tantbirojn D., Versluis A., Pintado M.R., DeLong R., and Douglas W.H. Tooth deformation patterns in molars after composite restoration. Dent Mater 20 (2004) 535-542
24. Versluis A., Tantbirojn D., Pintado M.R., DeLong R., and Douglas W.H. Residual shrinkage stress distributions in molars after composite restoration. Dent Mater 20 (2004) 554-564
25. Kanca J., and Suh B.I. Pulse activation: reducing resin-based composite contraction stresses at the enamel cavosurface margin. Am J Dent 12 (1999) 107-112
26. Feilzer A.J., De Gee A.J., and Davidson C.L. Setting stress in composite resin in relation to configuration of the restoration. J Dent Res 66 (1987) 1636-1639
27. Alster D., Venhoven B.A., Feilzer A.J., and Davidson C.L. Influence of compliance of the substrate materials on polymerization contraction stress in thin resin composite layers. Biomaterials 18 (1997) 337-341
28. Condon J.R., and Ferracane J.L. Assessing the effect of composite formulation on polymerization stress. J Am Dent Assoc 131 (2000) 497-503
29. Aarnts M.P., Akinmade A., and Feilzer A.J. Effect of filler load on contraction stress and volumetric shrinkage. J Dent Res 78 (1999) 482 (Special Issue)
30. Ferracane J.L., and Greener E.H. The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins. J Biomed Mater Res 20 (1986) 121-131
31. Aarnts M.P., Akinmade A., and Feilzer A.J. Effects of photoinitiator concentration on conversion, strength and stress development. J Dent Res 78 (1999) 234 (Special Issue)
32. Venhoven B.A., de Gee A.J., and Davidson C.L. Light initiation of dental resins: dynamics of the polymerisation. Biomaterials 17 (1996) 2313-2318
33. Loguercio A.D., Reis A., and Ballester R.Y. Polymerization shrinkage: effects of constraint and filling technique in composite restorations. Dent Mater 20 (2004) 236-243
34. Jedrychowski J.R., Bleier R.G., and Caputo A.A. Shrinkage stresses associated with incremental composite filling techniques in conservative Class II restorations. J Dent Child 68 (2001) 161-167
35. Beznos C. Microleakage at the different cervical margin of composite class II cavities with different restorative techniques. Oper Dent 26 (2001) 60-69
36. Kinomoto Y., Torii M., Takeshige F., and Ebisu S. Comparison of polymerization contraction stresses between self- and light-curing composites. Dent Mater 27 (1999) 383-389
37. Uno S., and Asmussen E. Marginal adaptation of a restorative resin polymerized at reduced rate. Scand J Dent Res 99 (1991) 440-444
38. Nomoto R., Uchida K., and Hirasawa T. Effect of light intensity on polymerization of light-cured composite resins. Dent Mater 13 (1994) 198-205
39. Feilzer A.J., Dooren L.H., De Gee A.J., and Davidson C.L. Influence of light intensity on the polymerization shrinkage and integrity of restoration-cavity interface. Eur J Oral Sci 103 (1995) 322-326
40. Labella R., Lambrechts P., Van Meerbeek B., and Van Herle G. Polymerization shrinkage and elasticity of flowable composites and filled adhesives. Dent Mater 15 (1999) 128-137
41. Iga M., Takeshige F., Ui T., Torii M., and Tsushitani M. The relationship between polymerization shrinkage measured by a modified dilatometer and the inorganic filler content of light-cure composite. Dent Mater 10 (1991) 38-45
42. Munksgaard E.C., Hansen E.K., and Kato H. Wall-to-wall polymerization contraction of composite resins versus filler content. Scand J Dent Res 95 (1987) 526-531
43. Aw T.C., and Nicholls J.I. Polymerization shrinkage of densely-filled resin composites. Oper Dent 26 (2001) 498-504
44. Price R.B., Rizkalla A.S., and Hall G.C. Effect of stepped light exposure on the volumetric polymerization shrinkage and bulk modulus of dental composites and an unfilled resin. Am J Dent 13 (2000) 176-180
45. Chen H.Y., Manhart J., Hickel R., and Kunzelmann K.H. Polymerization contraction stress in light-cured packable composite resins. Dent Mater 17 (2001) 253-259
46. Pearson J.D., and Bouschlicher M.R. Polymerization contraction force of packable composites. Gen Dent (2001) 643-647
47. Ferracane J.L. Developing a more complete understanding of stresses produced in dental composites during polymerization. Dent Mater 21 (2005) 36-42
48. Davidson C.L., and De Gee A.J. Relaxation of polymerization contraction stresses by flow in dental composites. J Dent Res 63 (1984) 146-148
49. Bouschlicher M.R., Vargas M.A., and Boyer D.B. Effect of composite type, light intensity, configuration factor, and laser polymerization on polymerization contraction forces. Am J Dent 10 (1997) 279-283
50. Unterbrink G., and Muessner R. Influence of light intensity on two restorative systems. J Dent 23 (1995) 183-189
51. Feilzer A.J., De Gee A.J., and Davidson C.L. Setting stresses in composites for two different curing modes. Dent Mater 9 (1993) 2-5
52. Koran P., and Kürschner R. Effect of sequential versus continuous irradiation of a light-cured resin composite on shrinkage, viscosity, adhesion and degree of polymerization. Am J Dent 12 (1998) 107-112
53. Lim B.S., Ferracane J.L., Sakaguchi R.L., and Condon J.R. Reduction of polymerization contraction stress for dental composites by two-step light-activation. Dent Mater 18 (2002) 436-444
54. Frommator U, Ernst CP, Willershausen B. The influence of "soft-start" polymerization on marginal integrity of class V fillings. J Dent Res,1999; IADR Abstr. no. 3545.
55. Brandrup J., and Immergut E.H. Polymer handbook. 3d ed. (1989), Wiley, New-York
56. Dlugokinski M.D., Caughman W.F., and Rueggeberg F.A. Assessing the effect of extraneous light on photoactivated resin composites. J Am Dent Assoc 129 (1998) 1103-1109
57. Bausch J.R., De Lange C., Davidson C.L., Peters A., and De Gee A.J. Clinical significance of polymerization shrinkage of composite resins. J Prosth Dent 48 (1982) 59-67
58. Laughlin G.A., Williams J.L., and Eick J.D. The influence of system compliance and sample geometry on composite polymerization shrinkage stress. J Biomed Mater Res 63 (2002) 671-678
59. Tani Y. Contraction force during polymerization of various composite resins. Dent Jpn 26 (1989) 97-100
60. Kunzelmann K.H., and Hickel R. Spannungsentwicklung durch polymerisationschrumpfung bei komposit-klebern. Dtsch Zahnärtliche Z 45 (1990) 699-700
61. Choi K.K., Condon J.R., and Ferracane J.L. The effect of adhesive thickness on polymerization contraction stress of composite. J Dent Res 79 (2000) 812-817
62. Braga R.R., and Ferracane J.L. Contraction stress related to degree of conversion and reaction kinetics. J Dent Res 81 (2002) 114-118
63. Calheiros F.C., Braga R.R., Kawano Y., and Ballester R.Y. Relationship between contraction stress and degree of conversion in restorative composites. Dent Mater 20 (2004) 939-946
64. Bouschlicher M.R., and Rueggeberg F.A. Effect of ramped light intensity on polymerization force and conversion in a photoactived composite. J Esth Dent 12 (2000) 328-339
65. Sakaguchi R.L., Peters M.C., Nelson S.R., Douglas W.H., and Poort H.W. Effects of polymerization contraction in composite restorations. J Dent 20 (1992) 178-182
66. Manhart J., Kunzelmann K.H., Chen H.Y., and Hickel R. Mechanical properties and wear behavior of light-cured packable composite resins. Dent Mater 16 (2000) 33-40
67. Kelsey W.P., Latta M.A., and Stanislav C.M. Physical properties of three packable resin-composite restorative materials. Oper Dent 25 (2000) 331-335
68. Choi K.K., Ferracane J.L., Hilton T.J., and Charlton D. Properties of packable dental composites. J Esth Dent 12 (2000) 213-226
69. De Gee A.J. Some aspects of vacuum mixing of composite resins and its effect on porosity. Quint Int 7 (1979) 69-74
70. Solitaire Usage Information, Heraeus Kulzer Dentist Products Division. GmbH, Germany.
71. Watts D.C., and Al-Hindi A. Intrinsic "soft-start" polymerization shrinkage-kinetics in an acrylate-based resin-composite. Dent Mater 15 (1999) 39-45
72. Patel M.P., Braden M., and Davy K.W.M. Polymerization shrinkage of methacrylate esters. Biomaterials 8 (1987) 54
73. Söderholm K.J., Zigan M., Ragan M., Fischlschweiger W., and Bergman M. Hydrolytic degradation of dental composites. J Dent Res 63 (1984) 1248-1254
74. Guggenberger R., and Weinmann W. Exploring beyond methacrylates. Am J Dent 13 (2000) 82-84
75. Ferracane J.L. Current trends in dental composites-critical review. J Am Dent Assoc 6 (1995) 302-318
76. Naghash H., Okay O., and Yagci Y. Gel formation by chain-crosslinking photopolymerization of methyl methacrylate and ethylene glycol dimethacrylate. Polymer 38 (1997) 1187-1196
77. Ernst C.P., Meyer G.R., Klöcker K., and Willershausen B. Determination of polymerization shrinkage stress by means of a photoelastic investigation. Dent Mater 20 (2004) 313-321
78. Asmussen E., and Peutzfeldt A. Influence of UEDMA, bis-GMA and TEGDMA on selected mechanical properties of experimental resin composites. Dent Mater 14 (1998) 51-56
79. Watts DC, Vogel LK, Marouf AS. Shrinkage stress reduction in resin-composites of increasing particle concentration. J Dent Res, 2002; 81:A-308, IADR Abstr. no. 2444.
80. Watts D.C., Marouf A.S., and Al-Hindi A.M. Photo-polymerization shrinkage-stress kinetics in resin-composites: methods development. Dent Mater 19 (2003) 1-11
81. Kemp-Scholte C.M., and Davidson C.L. Marginal sealing of contraction gaps in class V composite resin restorations. J Dent Res 67 (1988) 841-845
82. Kemp-Scholte C.M., and Davidson C.L. Marginal integrity related to bond strength and strain capacity of composite resin restorative systems. J Prosth Dent 64 (1990) 658-664
83. Ferdianakis K. Microleakage reduction from newer esthetic restorative materials in permanent molars. J Clin Pediatr Dent 23 (1998) 221-229
84. Fruits T.J., Van Brunt C.L., Khajotia S.S., and Duncanson Jr. M.G. Effect of cyclical lateral forces on microleakage in cervical resin composite restorations. Quint Int 33 (2002) 205-212
85. Belluz M., Pedrocca M., and Gagliani M. Restorative treatment of cervical lesions with resin composites: 4-year results. Am J Dent 18 (2005) 307-310
86. Silikas N., Eliades G., and Watts D.C. Light intensity effects on resin-composite degree of conversion and shrinkage strain. Dent Mater 16 (2000) 292-296
87. Miguel A., and De La Macorra J.C. A predictive formula of the contraction stress in restorative and luting materials attending to free and adhered surfaces, volume and deformation. Dent Mater 17 (2001) 241-246
88. Braga R.R., Hilton T.J., and Ferracane J.L. Contraction stress of flowable composite materials and their efficacy as stress-relieving layers. J Am Dent Assoc 134 (2003) 721-728
89. Abe Y., Lambrecht P., Inoue S., Braem M.J.A., Takeuchi M., Vanherle G., and Van Meerbeek B. Dynamic elastic modulus of "packable" composites. Dent Mater 17 (2001) 520-525
90. Alvarez-Gayosso C., Barcelo-Santana F., Guerrero-Ibarra J., Saez-Espinola G., and Canseco-Martinez M.A. Calculation of contraction rates due to shrinkage in light-cured composites. Dent Mater 20 (2004) 228-235
91. Lu H, Stansbury JW, Dickens SH, Eichmiller FC, Bowman CN. Probing the origins and control of shrinkage stress in dental resin-composites. II. Novel method of simultaneous measurements of polymerisation shrinkage stress and conversion. J Biomed Mater Res, in press.
92. Sperling L.H. Introduction to physical polymer science. 1st ed. (1986), Wiley-Interscience, New York
93. Lu H., Stansbury J.W., and Bowman C.N. Towards the elucidation of shrinkage stress development and relaxation in dental composites. Dent Mater 20 (2004) 979-986
94. Mehl A., Hickel R., and Kunzelmann K.H. Physical properties and gap formation of light-cured composites with and without "softstart-polymerization". J Dent 25 (1997) 321-330
95. Ernst C.P., Kürschner R., Rippin G., and Willershausen B. Stress reduction in resin-based composites cured with a two-step light-curing unit. Am J Dent 13 (2000) 69-72
96. Suh B.I., Feng L., Wang Y., Cripe C., Cincione F., and de Rijk W. The effect of the pulse-delay pulse technique on residual strain in composites. Compend Contin Educ Dent 20 2 (1999) 4-12
97. Yap A.U., Soh M.S., and Siow K.S. Post-gel shrinkage with pulse activation and soft-start polymerization. Oper Dent 27 (2002) 81-87
98. Burgess J.O., DeGoes M., Walker R., and Ripps A.H. An evaluation of four light-curing units comparing soft and hard curing. Pract Periodont Aesthet Dent 11 (1999) 125-132
99. Christensen R.P., Palmer T.M., Ploeger B.J., and Yost M.P. Resin polymerization problems-are they caused by resin curing lights, resin formulations or both?. Compend Contin Educ Dent Suppl (1999) S42-S54
100. Obici A.C., Sinhoreti M.A., de Goes M.F., Consani S., and Sobrinho L.C. Effect of the photo-activation method on polymerization shrinkage of restorative composites. Oper Dent 27 (2002) 192-198