Mechanical properties and wear behavior of light-cured packable composite resins

Dental Materials

Volumn 16, Issue 1, 2000, Pages 33-40

  Manhart, J ^a   Kunzelmann, K H ^a   Chen, H Y ^a   Hickel, R ^a  

^a UNIVERSITY OF MUNICH   (Germany)

Author keywords

Flexural modulus; Flexural strength; Fracture toughness; Ion releasing composites; Mechanical properties; Ormocers; Packable composites; Wear

Indexed keywords

ALERT COMPOSITE RESIN; ARISTON PHC; DEFINITE COMPOSITE RESIN; METHACRYLIC ACID DERIVATIVE; RESIN; SILOXANE; SOLITAIRE; SUREFIL PACKABLE COMPOSITE; TERPENE; TETRIC CERAM;

ANALYSIS OF VARIANCE; ARTICLE; CHEMISTRY; COMPARATIVE STUDY; COMPRESSIVE STRENGTH; DENTAL SURGERY; HARDNESS; MATERIALS TESTING; MECHANICS; NONPARAMETRIC TEST; PARTICLE SIZE; PLIABILITY; POROSITY;

ANALYSIS OF VARIANCE; COMPOSITE RESINS; COMPRESSIVE STRENGTH; DENTAL RESTORATION WEAR; HARDNESS; MATERIALS TESTING; MECHANICS; METHACRYLATES; PARTICLE SIZE; PLIABILITY; POROSITY; SILOXANES; STATISTICS, NONPARAMETRIC; TERPENES;

EID: 0033754174     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0109-5641(99)00082-2     Document Type: Article

References (61)

1. K.F. Leinfelder, T.B. Sluder, J.F.F Santos, J. Wall, Five-year clinical evaluation of anterior and posterior restorations of composite resins, Oper. Dent. 3 (1980) 276-281.
2. F. Lutz, R.W. Phillips, J.F. Roulet, J.C. Setcos, In vivo and in vitro wear of potential posterior composites, J. Dent. Res. 63 (1984) 914-920.
3. P. Lambrechts, M. Braem, G. Vanherle, Klinische Erfahrungen mit Composites und Dentin-Adhäsiven im Seitenzahnbereich I: Klinische Beurteilung von Composites, Phillip J 1 (1988) 12-28.
4. J.F. Roulet, The problems associated with substituting composite resins for amalgam: a status report on posterior composites, J. Dent. 16 (1988) 101-113.
5. S.C. Bayne, D.F. Taylor, T.M. Roberson, A.D. Wilder, J.R. Sturdevant, H.O. Heymann, M.W. Lisk, Long term clinical failures in posterior composites, J. Dent. Res. 68 (1989) 185 Abstr. no. 32.
6. R.G. Craig (Ed.), Restorative dental materials 10, Mosby Publishing Co, St. Louis, MO, 1997.
7. Y. Spanoudakis, R.J. Young, Crack propagation in a glass particle-filled epoxy resin. Part I. Effect of particle volume fraction and size, J. Mater. Sci. 19 (1984) 473-486.
8. Y. Spanoudakis, R.J. Young, Crack propagation in a glass particle-filled epoxy resin. Part II. Effect of particle-matrix adhesion, J. Mater. Sci. 19 (1984) 487-496.
9. H. St Germain, M.L. Swartz, R.W. Phillips, B.K. Moore, T.A. Roberts, Properties of microfilled composite resins as influenced by filler content, J. Dent. Res. 64 (1985) 155-160.
10. Y. Li, M.L. Swartz, R.W. Phillips, B.K. Moore, T.A. Roberts, Effect of filler content and size on properties of composites, J. Dent. Res. 64 (1985) 1396-1401.
11. M. Braem, W.J. Finger, V.E. Van Doren, P. Lambrechts, G. Vanherle, Mechanical properties and filler fraction of dental composites, Dent. Mater. 5 (1989) 346-349.
12. K.H. Chung, The relationship between composition and properties of posterior resin composites, J. Dent. Res. 69 (1990) 852-856.
13. K.H. Chung, E.H. Greener, Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins, J. Oral Rehabil. 17 (1990) 487-494.
14. S. Gladys, M.B. Van, M. Braem, P. Lambrechts, G. Vanherle, Comparative physico-mechanical characterization of new hybrid restorative materials with conventional glass-ionomer and resin composite restorative materials, J. Dent. Res. 76 (1997) 883-894.
15. F. Lutz, R.W. Phillips, A classification and evaluation of composite resin systems, J. Prosthet. Dent. 50 (1983) 480-488.
16. K.F. Leinfelder, Composite resins, Dent. Clin. North Am. 29 (1985) 359-371.
17. B.A. Venhoven, A.J. de Gee, A. Werner, C.L. Davidson, Influence of filler parameters on the mechanical coherence of dental restorative resin composites, Biomaterials 17 (1996) 735-740.
18. K.F. Leinfelder, Posterior composites. State-of-the-art clinical applications, Dent. Clin. North Am. 37 (1993) 411-418.
19. C.M. Bauer, K.H. Kunzelmann, R. Hickel, Simulierter Nahrungsabrieb von Kompositen und Ormoceren, Dtsch Zahnärztl. Zeitschr. 50 (1995) 635-638.
20. K.F. Leinfelder, Posterior composite resins: the materials and their clinical performance, J. Am. Dent. Assoc. 126 (1995) 663-676.
21. R. Perry, P. McGary, G. Kugel, One-year evaluation of a hybrid composite for posterior restorations, J. Dent. Res. 74 (1995) 404 Abstr. no 32.
22. M. Kawaguchi, T. Fukushima, T. Horibe, Effect of monomer structure on the mechanical properties of light-cured composite resins, Dent. Mater. J. 8 (1989) 40-45.
23. A. Peutzfeld, Resin composites in dentistry: the monomer systems, Fur. J. Oral Sci. 105 (1997) 97-116.
24. H. Wolter, W. Storch, H. Ott, New inorganic/organic copolymers (ORMOCERs) for dental applications, Mat. Res. Soc. Symp. Proc. 346 (1994) 143-149.
25. H. Wolter, W. Storch, H. Ott, Dental filling materials (posterior composites) based on inorganic/organic copolymers (ORMOCERs), Macro Akron. (1994) 503.
26. J. Manhart, B. Hollwich, A. Mehl, K.H. Kunzelmann, R. Hickel, Randqualität von Ormocer- und Kompositfüllungen in Klasse-II-Kavitäten nach künstlicher Alterung, Dtsch Zahnärztl. Zeitschr. 54 (1999) 89-95.
27. R. Hickel, W. Dasch, R. Janda, M. Tyas, K. Anusavice, New direct restorative materials, Int. Dent. J. 48 (1998) 3-16.
28. EN 24049 European Standard: Dentistry; Resin-based filling materials (ISO 4049:1988 + Technical corrigendum 1:1992), Beuth Verlag, Berlin, 1997.
29. A. Mehl, R. Hickel, K.H. Kunzelmann, Physical properties and gap formation of light-cured composites with and without softstart-polymerization, J. Dent. 25 (1997) 321-330.
30. NISTIR 4877: Room-temperature flexure fixture for advanced ceramics, NIST Publication, Gaithersburg, MD, 1989.
31. ASTM Designation E 399-83, Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials 1984 Annual Book of ASTM Standards, Part 10ASTM, Philadelphia, PA, 1984, pp. 519-554.
32. J.E. Srawley, Wide range stress intensity factor expressions for ASTM E-399 standard fracture toughness specimens, Int. J. Fracture 12 (1976) 475-476.
33. R. De Groot, H.C. Van Eist, M.C.R.B. Peters, Fracture mechanics parameters for failure prediction of composite resins, J. Dent. Res. 67 (1988) 919-924.
34. K.H. Kunzelmann, A. Mehl, R. Hickel, Sliding wear of an experimental ormocer and 15 commercial composites, J. Dent. Res. 77 (1998) 226 Abstr. no. 965.
35. K.H. Kunzelmann, Glass-ionomer cements, cermet cements, "hybrid"-glass-ionomers and compomers - laboratory trials - wear resistance, Trans. Acad. Dent. Mat. 9 (1996) 89-104.
36. C. Schnabel, P. Daes, K.H. Kunzelmann, R. Hickel, Two-body wear simulation in a computer controlled artificial mouth, J. Dent. Res. 74 (1994) 294 Abstr. no. 1540.
37. K.H. Kunzelmann, Verschleissanalyse und quantifizierung von Füllungsmaterialien in vivo und in vitro, 1, Shaker, Aachen, 1998.
38. A. Mehl, W. Gloger, K.H. Kunzelmann, R. Hickel, A new optical 3-D device for the detection of wear, J. Dent. Res. 76 (1997) 1799-1807.
39. D.E. Ruddell, J.Y. Thompson, P.J. Stamatiades, J.C. Ward, S.C. Bayne, E.R. Shellard, Mechanical properties and wear behavior of condensable composites, J. Dent. Res. 78 (1999) 156 Abstr. no. 407.
40. K.M. MacGregor, D.S. Cobb, M. Vargas, Physical properties of condensable versus conventional composites, J. Dent. Res. 78 (1999) 157 Abstr. no. 411.
41. W.P. Kelsey, M.A. Latta, W.W. Barkmeier, Physical properties of high density composite restorative materials, J. Dent. Res. 78 (1999) 207 Abstr. no. 810.
42. R. Kerby, J. Berlin, L. Knobloch, Fracture toughness of posterior condensable composite resins, J. Dent. Res. 78 (1999) 157 Abstr. no. 415.
43. R.E. Kovarik, J.W. Ergle, Fracture toughness of posterior composite resins fabricated by incremental layering, J. Prosthet. Dent. 69 (1993) 557-560.
44. D. Zhao, J. Botsis, J.L. Drummond, Fracture studies of selected dental restorative composites, Dent. Mater. 13 (1997) 198-207.
45. J.L. Drummond, J. Botsis, D. Zhao, J. Samyn, Fracture properties of aged and post-processed dental composites, Eur. J. Oral Sci. 106 (1998) 661-666.
46. R.A. Draughn, Effects of microstructure on compressive fatigue of composite restorative materials, in: C. Gebelein, F. Koblitz (Eds.), Biomedical and dental application of polymers, Plenum, New York, 1981, pp. 441-448.
47. R.A. Draughn, Effects of temperature on mechanical properties of composite dental restorative materials, J. Biomed. Mater. Res. 15 (1981) 489-494.
48. D.C. Smith, Posterior composite dental restorative materials: Materials development, in: G. Vanherle, D.C. Smith (Eds.), Posterior composite resin dental restorative materials, Peter Szulc, Amsterdam, 1985, pp. 47-50.
49. R.E. Kovarik, C.W. Fairhurst, Effect of Griffith precracks on measurement of composite fracture toughness, Dent. Mater. 9 (1993) 222-228.
50. J.L. Ferracane, R.C. Antonio, H. Matsumoto, Variables affecting the fracture toughness of dental composites, J. Dent. Res. 66 (1987) 1140-1145.
51. A.A. Griffith, The phenomena of rupture and flow in solids, Phil. Trans. R. Soc. 221A (1999) 163-198.
52. A.G. Gegauff, H.G. Pryor, Fracture toughness of provisional resins for fixed prosthodontics, J. Prosthet. Dent. 58 (1987) 23-29.
53. C.H. Lloyd, M. Adamson, The development of fracture toughness and fracture strength in posterior restorative materials, Dent. Mater. 3 (1987) 225-231.
54. M. Goldman, Fracture properties of composite and glass ionomer dental restorative materials, J. Biomed. Mater. Res. 19 (1985) 771-783.
55. B.R. Lang, M. Jaarda, R.F. Wang, Filler particle size and composite resin classification systems, J. Oral Rehabil. 19 (1992) 569-584.
56. J.R. Condon, J.L. Ferracane, In vitro wear of composite with varied cure, filler level, and filler treatment, J. Dent. Res. 76 (1997) 1405-1411.
57. L. Knobloch, R. Kerby, R. Seghi, Wear resistance of posterior condensable composite resins, J. Dent. Res. 78 (1999) 447 Abstr. no. 2735.
58. W.W. Barkmeier, T.M. Wilwerding, M.A. Latta, S.M. Blake, In-vitro wear assessment of high density composite resins, J. Dent. Res. 78 (1999) 448 Abstr. no. 2737.
59. S. Suzuki, In vitro wear of condensable resin composite restoratives, J. Dent. Res. 78 (1999) 447 Abstr. no. 2734.
60. H.M. Dang, D.C. Sarrett, Wear behavior of flowable and condensable composite resins, J. Dent. Res. 78 (1999) 447 Abstr. no. 2736.
61. J.W. Farah, J.M. Powers (Eds.), Condensable composites. The Dental Advisor, 15, 1998, pp. 1-4.