Laser forward transfer of electronic and power generating materials

Springer Series in Optical Sciences

Volumn 129, Issue , 2006, Pages 339-373

  Piquá, Alberto ^a   Kim, Heungsoo ^a   Arnold, Craig B ^b  

^a NAVAL RESEARCH LABORATORY   (United States)

^b Princeton University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 33846379626     PISSN: 03424111     EISSN: 15561534     Source Type: Book Series    
DOI: 10.1007/978-0-387-30453-3_14     Document Type: Article

References (75)

1. Adrian, F.J., Bohandy, J., Kim, B.F., Jette, A.N., and Thompson, P., 1987, A study of the mechanism of metal deposition by the laser-induced forward transfer process, J. Vac. Sci. Technol. B5: 1490-1494.
2. Arnold, C. B., Wartena, R. C., Pratap, B., Swider-Lyons, K. E., and Piqué, A., 2002, Laser direct writing of hydrous ruthenium dioxide micro-pseudocapacitors, in: Electroactive Polymers and Rapid Prototyping, D. B. Chrisey and S. C. Danforth, ed., volume 689, pages 275-280, Pittsburgh, PA. Materials Research Society.
3. Arnold, C. B., Wartena, R. C., Swider-Lyons, K. E., and Pique, A., 2003. Direct-write planar micro-ultracapacitors by laser engineering, J. Electrochem. Soc. 150:A571-A575.
4. Arnold, C. B., Kim, H., Sutto, T.E., and Piqué, A., 2004a, Direct write laser processing for miniature electrochemical systems. Laser Focus World, 40: 9-12.
5. Arnold, C. B., Kim, H. and Piqué, A., 2004b, Laser transferred primary alkaline microbatteries, Appl. Phys. A, 79: 417-420.
6. Arnold, C.B., and Piqué, A., 2004c, Self-filling wet electrochemical cells by laser processing, US patent application 20040256359.
7. Arnold, C.B., Piqué, A., Auyeung, R. C. Y. and Numberger, M., 2004d, Laser-based technique for producing and embedding electrochemical cells and electronic components directly into circuit board materials, US patent application 2005000613.
8. Auyeung, R.C.Y., Wu, H.D., Modi, R., Piqué, A., Fitz-Gerald, J.M., Young, H.D., Lakeou, S., Chung, R., and Chrisey, D.B., 2000, Matrix-assisted laser transfer of electronic materials for direct-write applications, Proc. SPIE 4088: 393-396.
9. Bähnisch, R., Gross, W., and Menschig, A., 2004, Single-shot, high repetition rate metallic pattern transfer. Microelectronic Engineering 50: 541-546.
10. Barbe, C. J., Arendse, F., Comte, P., Jirousek, M., Lenzmann, F., Shklover, V., and Grätzel, M., 1997, Nanocrystalline titanium oxide electrodes for photovoltaic applications, J. Am. Ceram. Soc. 80: 3157-3171.
11. Bates, J.D., Dudney, N. J., Lubben, D. C., Gruzalski, G. R., Kwak, b. S., Yu, X., and Zuhr, R. A., 1995, Thin-film rechargeable lithium batteries, J. Power Sources 54: 58-62.
12. Bates, J. B., Dudney, N. J., Neudecker, B., Ueda, A., and Evans, C. D., 2000, Thin-film lithium and lithium-ion batteries. Solid State Ionics 135: 33-45.
13. Bohandy, J., Kim, B.F., Adrian, F.J., 1986, Metal deposition from a supported metal film using an excimer laser, J. of Appl. Phys. 60: 1538-1539.
14. Bohandy, J., Kim, B.F., Adrian, F.J., and Jette, A.N., 1988, Metal deposition at 532 nm using a laser transfer technique, J. Appl. Phys. 63: 1158-1162.
15. Conway, B. E. 1999, Electrochemical Supercapacitors, Scientific Fundamentals and Technological Applications, Kluwer Academic, New York.
16. 2 from x-ray scattering, J. Phys. Chem. B 106:12677-12683.
17. Esrom, H., Jun-Ying Zhang, Kogelschatz, U., and Pedraza, A.J., 1995, New approach of a laser-induced forward transfer for deposition of patterned thin metal films, Appl. Surf. Sci. 86: 202-207.
18. Fang, Q. L., Evans, D. A., Roberson, S. L., and Zheng, J. P., 2001, Ruthenium oxide film electrodes prepared at low temperatures for electrochemical capacitors, J. Electrochem. Soc. 148:A833-A837.
19. Fernandez-Pradas, J.M., Colina, M., Serra, P., Dominguez, J., and Morenza, J.L., 2004, Laser-induced forward fransfer of biomolecules. Thin Sol. Films 453-454: 27-30.
20. c YBaCuO and BiSrCaCuO superconducting thin films, J. Appl. Phys. 66: 457-459.
21. Greer, J. A. and Parker, T. E., 1988, Laser-induced forward transfer of metal oxides to trim the frequency of surface acoustic wave resonator devices, Proc. SPIE 998: 113-125.
22. Herman, I. P., 1989, Laser-assisted deposition of thin films from gas-phase and surface-adsorbed molecules, Chem. Rev. 89:1323-1357.
23. Hinsch, A., Kroon, J. M., Kern, R., Uhlendorf, I., Holzbock, J., Meyer, A., and Ferber, 2001, Long-term stability of dye-sensitized solar cells, J., Prog. Photovolt: Res. Appl. 9: 425-438.
24. Holmes, A.S., and Saidam, S.M., 1998, Sacrificial layer process with laser-driven release for batch assembly operations, J. of Microelectromechanical Sys., 7:416-422.
25. Holmes, A.S., 2002, Laser processes for MEMS manufacture, Proc. SPIE 4426:203-209.
26. Humble, P. H., Harb, J. N., and LaFollettte, R., 2001, Microscopic nickel-zinc batteries for use in autonomous microsystems, J. Electrochem. Soc. 18: A1357-A1361.
27. 2 electrodes of dye-sensitized solar cells, Chem. Mater. 15: 2824-2828.
28. Kalyanasundaram, K., and Grätzel, M., 1998, Applications of functionalized transition metal complexes in photonic and optoelectronic devices. Coordination Chemical Reviews 77: 347-414.
29. Kántor, Z., Tóth, Z., Szorenyi, T., and Tóth, A.L., 1994, Deposition of micrometer-sized tungsten patterns by laser transfer technique, Appl. Phys. Lett. 64: 3506-3508.
30. Karaiskou, A., Zergioti, I., Fotakis, C, Kapsetaki, M., and Kafetzopoulos, D., 2003, Microfabrication of biomaterials by the sub-ps laser-induced forward transfer process, Appl. Surf. Sci. 208-209: 245-249.
31. 2 films for dye-sensitized solar cells, Appl. Phys. Lett. 85: 464-466.
32. 2 electrodes for dye-sensitized solar cells, accepted for publication in Appl. Phys. A.
33. Kim, I. H. and Kim, K. B., 2001, Ruthenium oxide thin film electrodes for supercapacitors. Electrochem, Solid-State Lett. 5:A62-A64.
34. Koeneman, P. B., Busch-Vishniac, I. J., and Wood, K. L., 1997, FeasibiHty of micro power supplies for MEMS, J. Microelectromech. Sys. 6:355-362.
35. LaFollettte, R., Harb, J. N., and Humble, P., 2001, in: Sixteenth Annu. Battery Conf. Applications and Advances, R.S.L. Das and H. Frank, ed., IEEE, Piscatawy, NJ, pp. 349-354.
36. Linden, D. and Reddy, T. B., 2001, Handbook of Batteries, 3rd ed, McGraw-Hill, New York.
37. McKeown, D. A., Hagans, P. L., Carette, L. P. L., Russell, A. E., Swider, K. E., and Rolison, D. R., 1999, Structure of hydrous ruthenium oxides: Implications for charge storage, J. Phys. Chem. B 103:4825-4832.
38. Modi, R., Wu, H.D., Auyeung, R.C.Y., Gilmore, C.M., and Chrisey, D.B., 2001, Direct writing of polymer thick film resistors using a novel laser transfer technique, J. Mater. Res. 16:3214-3222.
39. 2 nanoparticle preparation methods and annealing temperature on the efficiency of dye-sensitized solar cells, J. Phys. Chem. B 106: 10004-10010.
40. 2 electrodes, J. Am. Chem. Soc. 115: 6382-6390.
41. 2 thin films synthesized by a spray pyrolysis deposition (SPD) technique and their application to dye-sensitized solar cells, Sol. Energy Mater. Sol. Cells 70: 425-435.
42. 2 films, Nature 353: 737-740.
43. Osgood, R. M. and Deutsch, T. F., 1985, Laser-induced chemistry for microelectronics, Science 227: 709-714.
44. Papakonstantinou, P., Vainos, N.A., and Fotakis, C, 1999, Microfabrication by UV femtosecond laser ablation of Pt, Cr and indium oxide thin films, Appl. Surf. Sci. 151: 159-170.
45. Pimenov, S.M., Shafeev, G.A., Smolin, A.A., Konov, V.I., and Vodolaga, B.K., 1995, Laser-induced forward transfer of ultra-fine diamond particles for selective deposition of diamond films, Appl. Surf. Sci. 86: 208-212.
46. Piqué, A., Chrisey, D.B., Auyeung, R.C.Y., Lakeou, S., Chung, R., McGill, R.A., Wu, P.K., Duignan, M., Fitz-Gerald, J., and Wu, H.D., 1999a, Laser direct writing of circuit elements and sensors, Proc. SPIE 3618: 330-339.
47. Piqué, A., Chrisey, D.B., Auyeung, R.C.Y., Fitz-Gerald, J., Wu, H.D., McGill, R.A., Lakeou, S., Wu, P.K., Nguyen, V., and Duignan, M., 1999b, A novel laser transfer process for direct writing of electronic and sensor materials, Appl. Phys. A A69: 279-284.
48. Piqué, A., Chrisey, A.D.B., Fitz-Gerald, J.M., McGill, R.A., Auyeung, R.C.Y., Wu, H.D., Lakeou, S., Nguyen, V., Chung, R., and Duignan, M., 2000a, Direct writing of electronic and sensor materials using a laser transfer technique, J. Mater. Res. 15: 1872-1875.
49. Piqué, A., Fitz-Gerald, J., Chrisey, D.B., Auyeung, R.C.Y., Wu, H.D., Lakeou, S., and McGill, R.A., 2000b, Direct writing of electronic materials using a new laser assisted transfer/annealing technique, Proc. SPIE 3922: 105-112.
50. Piqué, A., Weir, D.W., Wu, P.K., Pratap, B., Arnold, C.B., Ringeisen, B.R., McGill, R.A., Auyeung, R.C.Y., Kant, R.A., and Chrisey, D.B., 2002, Direct-write of sensor devices by a laser forward transfer technique, Proc. SPIE 4637: 361-368.
51. Piqué, A., Arnold, C.B., Pratap, B., Auyeung, R.C.Y., Kim, H., and Weir, D.W., 2003, Laser direct-write of metal patterns for interconnects and antennas, Proc. SPIE 4977: 602-608.
52. Piqué, A., Mathews, S.A., Auyeung, R.C., Ollinger, M., Kim, H., Pratap, B., Arnold, C.B., and Sutto, T.E, 2004a, Application of laser direct-write techniques for embedding electronic and micropower components, Proc. SPIE 5662: 564-569.
53. Piqué, A., Arnold, C. B., Kim, H., Ollinger, M., and Sutto, T.E., 2004b, Rapid prototyping of micro-power sources by laser direct-write, Appl. Phys. A, 79: 783-786.
54. Piqué, A., Pratap, B., Mathews, S. A., Kams, B. J., Auyeung, R. C., Kasser, M., Ollinger, M., Kim, H., Lakeou, S., and Arnold, C.B., 2005a, Laser direct-write of embedded electronic components and circuits, Proc. SPIE 5713: 223-230.
55. Piqué, A., Mathews, S. A., Pratap, B., and Auyeung, R. C, 2005b, Laser forward transfer of semiconductor devices. Laser Precision Microfabrication Conference, Williamsburg VA.
56. Sarangapani, S., Tilak, B., and Chen, C, 1996, Materials for electrochemical capacitors. J. Electrochem. Soc. 143:3791-3799.
57. Schultze, V., and Wagner, M, 1991, Laser-induced forward transfer of aluminum, Appl. Surf. Sci. 52:303-309.
58. Serra, P., Colina, M., Fernandez-Pradas, J.M., Sevilla, L., and Morenza, J.L., 2004, Preparation of functional DNA microarrays through laser-induced forward transfer, Appl. Phys. Lett. 85: 1639-1641.
59. Sutto, T. E., Ollinger, M., Kim, H., Arnold, C.B. and Piqué, A., 2006, Laser transferable polymer-ionic liquid separator/electrolytes for solid-state rechargeable lithium ion microbatteries, Electrochem. Solid-State Lett. 9:A69-A71.
60. Tolbert, W.A., Lee, I.-Y.S., Doxtader, M.M., Ellis, E.W., and Dlott, D.D., 1993a, High-speed color imaging by laser ablation transfer with a dynamic release layer: Fundamental mechanisms, J. Imaging. Sci. Tech. 37: 411-421.
61. Tolbert, W.A., I-Yin Sandy Lee, Xiaoning Wen, Dlott, D.D., Doxtader, M.M., and Ellis, E.W., 1993b, Laser ablation transfer imaging using picosecond optical pulses: Ultra-high speed, lower threshold and high resolution, J. Imaging. Sci. Tech. 37: 485-489.
62. + laser-induced forward transfer (LIFT): A novel method for micrometer-size surface patterning, Appl. Surf. Sci. 69: 317-320.
63. Trasatti, S. and Kurzweil, P., 1994, Electrochemical supercapacitors as versatile energy stores, Plat. Met. Rev. 38:46-56.
64. Vincent, C. A. and Scrosati, B., 1997, Modern Batteries, 2nd ed., Arnold, London.
65. Wartena, R. C., Curtright, A.E., Arnold, C. B., Piqué, A. and Swider-Lyons, K. E., 2004, Li-ion microbatteries generated by laser direct write, J. Power Sources 126: 193-202.
66. Wu, P.K., Ringeisen, B.R., Callahan, J., Brooks, M., Bubb, D.M., Wu, H.D., Piqué, A., Spargo, B., McGill, R.A., and Chrisey, D.B., 2001, The deposition, structure, pattern deposition, and activity of biomaterial thin-films by matrix-assisted pulsed-laser evaporation (MAPLE) and MAPLE direct write. Thin Sol. Films 389-399:607-614.
67. Young, D., Auyeung, R.C.Y., Piqué, A., Chrisey, D.B., and Dlott, D.D., 2001a, Time-resolved optical microscopy of a laser-based forward transfer process, Appl. Phys. Lett. 78:3169-3171.
68. Young, D., Wu, H.D., Auyeung, R.C.Y., Modi, R., Fitz-Gerald, J., Piqué, A., Chrisey, D.B., Atanassova, P., and Kodas, T., 2001b, Dielectric properties of oxide structures by a laser-based direct-writing method, J. Mater. Res. 16:1720-1725.
69. Young, D., Auyeung, R.C.Y., Piqué, A., Chrisey, D.B., and Dlott, D.D., 2002, Plume and jetting regimes in a laser based forward transfer process as observed by time-resolved optical microscopy, Appl. Surf. Sci. 197-198:181-187.
70. Zergioti, I., Mailis, S., Vainos, N.A., Papakonstantinou, P., Kalpouzos, C, Grigoropoulos, C.P., and Fotakis, C, 1998a, Microdeposition of metal and oxide structures using ultrashort laser pulses, Appl Phys. A 66: 579-582.
71. Zergioti, I., Malilis, S., Vainos, N.A., Fotakis, C, Chen, S., and Grigoropoulos, C.P., 1998b, Microdeposition of metals by femtosecond excimer laser, Appl. Surf. Sci. 127-129: 601-605.
72. Zergioti, I., Karaiskou, A., Papazoglou, D.G., Fotakis, C., Kapsetaki, M., and Kafetzopoulos, D., 2005, Femtosecond laser microprinting of biomaterials, Appl. Phys. Lett. 86: 163902-1-163902-3.
73. Zhang, C., Liu, D., Mathews, S.A., Graves, J., Schaefer, T.M., Gilbert, B.K., Modi, R.,Wu, H.-D., and Chrisey, D.B., 2003, Laser direct-write and its application in low temperature Co-fired ceramic (LTCC) technology, Microelectronic Eng. 70:41-49.
74. Zheng, J. P., Cygan, P. J., and Jow, T. R., 1995, Hydrous ruthenium oxide as an electrode material for electrochemical capacitors, J. Electrochem. Soc. 142:2699-2703.
75. 2O with various water contents, J. Power Sources 110:86-90.