Micro- and nano-structured conducting polymeric materials

Chinese Science Bulletin

Volumn 50, Issue 16, 2005, Pages 1673-1682

  Lu, Gewu ^a   Chen, Feng'en ^a   Wu, Xufeng ^a   Qu, Liangti ^a   Zhang, Jiaxin ^a   Shi, Gaoquan ^a  

^a TSINGHUA UNIVERSITY   (China)

Author keywords

Conducting polymer; Hard template; Microstructure; Soft template

Indexed keywords

EID: 33644779055     PISSN: 10016538     EISSN: 18619541     Source Type: Journal    
DOI: 10.1360/982005-670     Document Type: Review

References (124)

1. Nalwa, H. S., Handbook of Nanostructured Materials and Nanotechnology, New York: Academic Press, 2000.
2. Shalaev, V. M., Moskovits, M., Nanostructured Materials: Clusters, Composites, and Thin Films, Washington, DC: American Chemical Society, 1997.
3. Edelstein, A. S., Cammarata, R. C., Nanomaterials: Synthesis, Properties, and Applications, Philadelphia, PA: Institute of Physics, 1996.
4. Wang, J. Z., Zheng, Z. H., Li, H. W. et al., Dewetting of conducting polymer inkjet droplets on patterned surfaces, Nature Mater., 2004, 3(3): 171-176.
5. Nagai, H., Segawa, H., Energy-storable dye-sensitized solar cell with a polypyrrole electrode, Chem. Commun., 2004, (8): 974-975.
6. Forzani, E. S., Zhang, H. Q., Nagahara, L. A. et al., A conducting polymer nanojunction sensor for glucose detection, Nano Lett., 2004, 4(9): 1785-1788.
7. Martin, C. R., Kohli, P., The emerging field of nanotube biotechnology. Nature Rew. Drug Discovery, 2003, 2(1): 29-37.
8. Jager, E. W. H., Smela, E., Inganas, O., Microfabricating conjugated polymer actuators, Science, 2000, 290(5496): 1540-1545.
9. Martin, C. R., Nanomaterials - a membrane-based synthetic approach, Science, 1994, 266(5193): 1961-1966.
10. Popovic, M. M., Grgur, B. N., Miskovic-Stankovic, V. B., Studies on electrochemically deposited PANI and PANI/epoxy coatings on mild steel in acid sulfate solution, Progress in Org. Coatings, 2005, 52(4): 359-365.
11. Lee, K. H., Heeger, A. J., Crossover to negative dielectric response in the low-frequency spectra of metallic polymers, Phys. Rev. B., 2003, 68: Art. No. 035201.
12. Parthasarathy, R. V., Martin, C. R., Enzyme and chemical encapsulation in polymeric microcapsules, J. Appl. Polym. Sci., 1996, 62(6): 875-886.
13. Yu, A., Meiser, F., Cassagneau, T. et al., Fabrication of polymer nanoparticle composite inverse Oopals by a one-stage electrochemical co-deposition process, Nano Lett., 2004, 4(1): 177-181.
14. Zhang, L. J., Wan, M. X., Self-assembly of polyaniline - From nanotubes to hollow microspheres, Adv. Funct. Mater., 2003, 13(10): 815-820.
15. Yang, Y. S., Liu, J., Wan, M. X., Self-assembled conducting polypyrrole micro/nanotubes, Nanotechnology, 2002, 13(6): 771-773.
16. Zhang, L. J., Wan, M. X., Synthesis and characterization of self-assembled polyaniline nanotubes doped with D-10-camphor-sulfonic acid, Nanotechnology, 2002, 13(6): 750-755.
17. Wei, Z. X., Wan, M. X., Hollow microspheres of polyaniline synthesized with an aniline emulsion template, Adv. Mater., 2002, 14(18): 1314-1318.
18. Wan, M. X., Huang, K., Zhang, L. J. et al., Nanotubes of conducting polyaniline and polypyrrole. International Journal of Nonlinear Sciences and Numerical Simulation, 2002, 3(3-4): 465-468.
19. Fleischer, R. L., Price, P. B., Walker, R. M., Nuclear Tracks in Solids, Berkeley, CA: Univ. of California Press, 1975.
20. Almawiawi, D., Coombs, N., Moskovits, M., Magnetic properties of Fe deposited into anodic aluminum oxide pores as a function of particle size, J. Appl. Phys., 1991, 70(8): 4421-4425.
21. Foss, C. A., Hornyal, G. L., Stocher, J. A. et al., Optical properties of composite membranes containing arrays of nanoscopic gold cylinders, J. Phys. Chem., 1992, 96(19): 7497-7499.
22. Foss, C. A., Hornyak, G. L., Stockert, J. A. et al., Template-synthesized nanoscopic gold particles - optical-spectra and the effects of particle-size and shape, J. Phys. Chem., 1994, 98(11): 2963-2971.
23. Cai, Z., Martin, C. R., Electronically conductive polymer fibers with mesocopic diameters show enhanced electronic conductivities, J. Am. Chem. Soc., 1989, 111(11): 4138-4139.
24. Parthasarathy, R. V., Martin, C. R., Synthesis of polymeric microcapsule arrays and their use for enzyme immobilization, Nature, 1994, 369(6478): 298-301.
25. Penner, R. M., Martin, C. R., Controlling the morphology of electronically conductive polymers, J. Electrochem. Soc., 1986, 133(10): 2206-2207.
26. Burford, R. P., Tongtam, T., Conducting polymers with controlled fibrillar morphology, J. Mater. Sci., 1991, 26(12): 3264-3270.
27. Fu, M. X., Zhu, Y. F., Tan, R. Q. et al., Aligned polythiophene micro- and nano-tubules, Adv. Mater., 2001, 13(24): 1874-1877.
28. Cao, J., Sun, J. Z., Shi, G. Q. et al., Photovoltaic properties of polythiophene nano-tuble films, Materials Chemistry and Physics, 2003, 82(1): 44-48.
29. Fu, M. X., Chen, F. E., Shi, G. Q. et al., Electrochemical fabrication of aligned microtubular heterjunctions of poly(p-phenlene) and polythiophene, J. Mater. Chem., 2002, 12(8): 2331-2333.
30. Zhang, J. X., Shi, G. Q., Liu, C. et al., Electrochemical fabrication of polythiophene film coated metallic nanowire arrays, J. Mater. Sci., 2003, 38(11): 2423-2427.
31. Zhang, J. X., Shi, G. Q., Chen, F. et al., Aligned polythiophene coated gold nanowires, Synth. Met., 2003, 135(1-3): 217-218.
32. Martin, C. R., Van Dyke, L. S., Cai, Z. et al., Template-synthesis of organic microtubules, J. Am. Chem. Soc., 1990, 112(24): 8976-8977.
33. Liang, W., Martin, C. R., Template-synthesized polyacetylene fribrils show enhanced supermolecular order, J. Am. Chem. Soc., 1990, 112(26): 9666-9668.
34. Menon, V. P., Lei, J. T., Martin, C. R., Investigation of molecular and supermolecular structure in template-synthesized polypyrrole tubules and fibrils, Chem. Mater., 1996, 8(9): 2382-2390.
35. Cepak, V. M., Martin, C. R., Preparation of polymeric micro- and nanostructures using a template-based deposition method, Chem. Mater., 1999, 11(5): 1363-1367.
36. Piraux, L., Dubois, S., Duvail, J. L. et al., Fabrication and properties of organic and metal nanocylinders in nanoporous membranes, J. Mater. Res., 1999, 14(7): 3042-3050.
37. Demoustier-Champagne, S., Stavaux, P. Y., Effect of electrolyte concentration and nature on the morphology and the electrical properties of electropolymerized polypyrrole nanotubules, Chem. Mater., 1999, 11(3): 829-834.
38. Atchison, S. N., Burford, R. P., Darragh, T. A. et al., Morphology of high surface area polypyrrole structures, Polymer Int., 1991, 26: 261-266.
39. Shi, G. Q., Jin, S., Xue, G. et al., A conducting polymer film stronger than aluminum, Science, 1995, 267(5200): 994-996.
40. Shi, G. Q., Xue, G., Li, C. et al., Uniaxial oriented poly(p-phenylene) fibrils and films, Macromolecules, 1994, 27(13): 3678-3679.
41. Shi, G. Q., Li, C., Liang, Y. Q., High-strength conducting polymers prepared by electrochemical polymerization in boron trifluoride diethyl etherate solution, Adv. Mater., 11(13): 1145-1146.
42. Qu, L. T., Shi, G. Q., Crystalline oligopyrene nanowires with multicolored emission, Chem. Comm., 2004, 4(24): 2800-2801.
43. He, Y. H., Yuan, J. Y., Shi, G. Q., Fabrication of gold nanocrystal-coated polypyrrole nanotubules, J. Mater. Chem., 2005, 15(8): 859-862.
44. Barthet, C., Armes, S. P., Lascelles, S. F. et al., Synthesis and characterization of micro-sized polyaniline-coated polystyrene latexes, Langmuir, 1998, 14(8): 2032-2041.
45. Okubo, M., Fujii, S., Minami, H., Production of electrically conductive, core/shell polystyrene/polyaniline composite particles by chemical oxidative seeded dispersion polymerization, Colloid Polym. Sci., 2001, 279(2): 139-145.
46. Caruso, F., Hollow capsule processing through colloidal templating and self-assembly, Chem. Eur. J., 2000, 6(3): 413-419.
47. Stejskal, J., Kratochvil, P., Armes, S. P. et al., Polyaniline dispersions: stabilization by colloidal silica particles, Macromolecules, 1996, 29(21): 6814-6819.
48. Jun, J. B., Kim, J. W., Lee, J. W. et al., Spherical polarization body: Synthesis of monodisperse micron-sized polyaniline composite particles, Macromol. Rapid Comm., 2001, 22(12): 937-940.
49. Marinakos, S. M., Shultz, D. A., Feldheim, D. L., Gold nanoparticles as templates for the synthesis of hollow nanometer-sized conductive polymer capsules, Adv. Mater., 1999, 11(1): 34-37.
50. Cairns, D. B., Armes, S. P., Bremer L. G. B., Synthesis and characterization of submicrometer-sized polypyrrole-polystyrene composite particles, Langmuir, 1999, 15(23): 8052-8058.
51. Cairns, D. B., Armes, S. P., Chehimi, M. M. et al., X-ray photoelectron spectroscopy characterization of submicrometer-sized polypyrrole - Polystyrene composites, Langmuir, 1999, 15(23): 8059-8066.
52. Khan, M. A., Armes, S. P., Synthesis and characterization of micrometer-sized poly(3,4 ethylenedioxythiophene)-coated polystyrene latexes, Langmuir, 1999, 15(10): 3469-3475.
53. Hao, L. Y., Zhu, C. L., Chen, C. N. et al., Fabrication of silica core-conductive polymer polypyrrole shell composite particles and polypyrrole capsule on monodispersed silica templates, Synth. Met., 2003, 139(2): 391-396.
54. Gangopadhyay, R., De, A., Conducting polymer nanocomposites: A brief overview, Chem. Mater., 2000, 12(3): 608-622.
55. Park, M. K., Onishi, K., Locklin, J. et al., Self-assembly and characterization of polyaniline and sulfonated polystyrene multilayer-coated colloidal particles and hollow shells, Langmuir, 2003, 19(20): 8550-8554.
56. Braun, P. V., Wiltzius, P., Microporous materials-Electrochemically grown photonic crystals, Nature, 1999, 402(6762): 603-604.
57. Lee, Y. C., Kuo, T. J., Hsu, C. J. et al., Fabrication of 3D macroporous structures of II-VI and III-V semiconductors using electrochemical deposition, Langmuir, 2002, 18(25): 9942-9946.
58. Sumida, T., Wada, Y., Kitamura, T. et al., Electrochemical preparation of macroporous polypyrrole films with regular arrays of interconnected spherical voids, Chem. Commun., 2000, 0(17): 1613-1614.
59. Cassagneau, T., Caruso, F., Semiconducting polymer inverse opals prepared by electropolymerization, Adv. Mater., 2002, 14(1): 34-38.
60. Wang, D. Y., Caruso, F., Fabrication of polyaniline inverse opals via templating ordered colloidal assemblies, Adv. Mater., 2001, 13(5): 350-353.
61. Noll, J. D., Nicholson, M. A., Van Patten, P. G. et al., Template electropolymerization of polypyrrole nanostructures on highly ordered pyrolytic graphite stage and pit defects, J. Electrochem. Soc., 1998, 145(10): 3320-3328.
62. Myrick, M. L., Noll, J. D., Nicholson, M. A., Modeling of growth morphology of underpotential electropolymerization of pyrrole on graphite, J. Electrochem. Soc., 1998, 145(1): 179-185.
63. Hou, H. Q., Jun, Z., Reuning, A. et al., Poly(p-xylylene) nanotubes by coating and removal of ultrathin polymer template fibers, Macromolecules, 2002, 35(7): 2429-2431.
64. Fan, J. H., Wan, M. X., Zhu, D. B. et al., Synthesis and properties of carbon nanotube-polypyrrole composites, Synth. Met., 1999, 102(1-3): 1266-1267.
65. Chen, G. Z., Shaffer, M. S. P., Coleby, D. et al., Carbon nanotube and polypyrrole composites: Coating and doping, Adv. Mater., 2000, 12(7): 522-525.
66. Downs, C., Nugent, J., Ajayan, P. M. et al., Efficient polymerization of aniline at carbon nanotube electrodes, Adv. Mater., 1999, 11(12): 1028-1031.
67. Gao, M., Huang, S. M., Dai, L. M. et al., Aligned coaxial nanowires of carbon nanotubes sheathed with conducting polymers, Angew. Chem. Int. Edit., 2000, 39(20): 3664-3667.
68. McConnell, G. A., Gast, A. P., Huang, J. S. et al., Disorder-order transition in soft sphere polymer micelles, Phys. Rev. Lett., 1993, 71(13): 2102-2105.
69. Wei, Z. X., Zhang, L. J., Yu, M. et al., Self-assembling sub-micrometer-sized tube junctions and dendrites of conducting polymers, Adv. Mater., 2003, 15(16): 1382-1385.
70. Wei, Z. X., Zhang, Z. M., Wan, M. X., Formation mechanism of self-assembled polyaniline micro/nanotubes, Langmuir, 2002, 18(3): 917-921.
71. Huang, Z. M., Shi, G. Q., Zhang, J. X. et al., Template-free electrosynthesis of aligned poly(p-phenylene) microtubules, Chinese Science Bulletin, 2003, 48(5): 434-436.
72. Jang, J., Yoon, H., Facile fabrication of polypyrrole nanotubes using reverse microemulsion polymerization, Chem. Commun., 2003, 3(6): 720-721.
73. Qu, L. T., Shi, G. Q., Hollow microstructures of polypyrrole doped by poly(styrene sulfonic acid), Journal of Polymer Science: Part A: Polymer Chemistry, 2004, 42(13): 3170-3177.
74. Qu, L. T., Shi, G. Q., Yuan, J. Y. et al., Preparation of polypyrrole microstructures by direct electrochemical oxidation of pyrrole in an aqueous solution of camphorsulfonic acid, J. Electroanal. Chem., 2004, 561(1-2): 149-156.
75. Qu, L. T., Shi, G. Q., Chen, F. E. et al., Electrochemical growth of polypyrrole microcontainers, Macromolecules, 2003, 36(4): 1063-1067.
76. Yuan, J. Y., Zhang, D. Q., Qu, L. T., Direct electrochemical generation of conducting polymer microcontainers on silicon substrate, Polym. Int., 2004, 53(12): 2125-2129.
77. Liu, J., Wan, M. X., Synthesis, characterization and electrical properties of microtubules of polypyrrole synthesized by a template-free method, J. Mater. Chem., 2001, 11(2): 404-407.
78. Mcconnell, G. A., Lin, M. Y., Gast, A. P., Long-range order in polymeric micelles under steady shear, Macromolecules, 1995, 28(20): 6754-6764.
79. McConnell, G. A., Gast, A. P., Melting of ordered arrays and shape transitions in highly concentrated diblock copolymer solutions, Macromolecules, 1997, 30(3): 435-444.
80. McConnell, G. A., Gast, A. P., Predicting disorder-order phase transitions in polymeric micelles, Phys. Rev. E, 1996, 54(5): 5447-5455.
81. Jenekhe, S. A., Chen, X. L., Self-assembly of ordered microporous materials from rod-coil block copolymers, Science, 1999, 283(5400): 372-375.
82. Bjornholm, T., Hassenkam, T., Greve, D. R. et al., Polythiophene nanowires, Adv. Mater., 1999, 11(14): 1218-1221.
83. Kosonen, H., Ruokolainen, J., Knaapila, M. et al., Nanoscale conducting cylinders based on self-organization of hydrogen-bonded polyaniline supramolecules, Macromolecules, 2000, 33(23): 8671-8675.
84. Holdcroft, S., Patterning p-Conjugated Polymers, Adv. Mater., 2001, 13(23): 1753-1765.
85. Xia, Y. N., Whitesides, G. M., Soft Lithography, Angew. Chem. Int. Ed., 1998, 37(5): 550-575.
86. Okazaki, S., Resolution limits of optical lithography, J. Vac. Sci. Technol. B, 1991, 9(6): 2829-2833.
87. Jeong, H. J., Markle, D. A., Owen, G. et al., The future of optical lithography, Solid State Technol., 1994, 37(4): 39-47.
88. Levenson, M. D., Extending optical lithography to the gigabit era, Solid State Technol., 1995, 38(2): 57-66.
89. Geppert, L., Semiconductor lithography for the next millennium, IEEE Spectrum, 1996, 33(4): 33-38.
90. Huber, T. E., Luo, L., Far-infrared propagation in metal wire microstructures, Appl. Phys. Lett., 1997, 70(19): 2502-2504.
91. Hoyer, P., Baba, N., Masuda, H., Small quantum-sized cds particles assembled to form a regularly nanostructured porous film, Appl. Phys. Lett., 1995, 66(20): 2700-2702.
92. Masuda, H., Fukuda, K., Ordered metal nanohole arrays made by a 2-stage replication of honeycomb structures of anodic alumina, Science, 1995, 268(5216): 1466-1468.
93. Hoyer, P., Semiconductor nanotube formation by a two-stage template process, Adv. Mater., 1996, 8(10): 857-859.
94. Lehmann, H. W., Widmer, R., Ebnoether, M. et al., Fabrication of submicron crossed square wave gratings by dry etching and thermoplastic replication techniques, J. Vac. Sci. Technol. B, 1983, 1(4): 1207-1210.
95. Schlereth, K. H., Bötther, H., Embossed grating lead chalcogenide distributed-feedbaclasers, J. Vac. Sci. Technol. B, 1992, 10(1): 114-117.
96. Emmelius, M., Pawlowski, G., Vollmann, H. W., Materials for optical data storage, Angew. Chem. Int. Ed., 1989, 28(11): 1445-1471.
97. Chou, S. Y., Krauss, P. R., Renstrom, P. J., Imprint of sub-25 nm vias and trenches in polymers, Appl. Phys. Lett., 1995, 67(21): 3114-3116.
98. Chou, S. Y., Krauss, P. R., Renstrom, P. J., Imprint lithography with 25-nanometer resolution, Science, 1996, 272(5258): 85-87.
99. Haverkorn, H. C., Rijsewijk, P. E., Legierse, J. et al., Manufacture of laservision video discs by a photopolymerization process, Philips Tech. Rev., 1982, 40: 287-297.
100. Kloosterboer, J. G., Lippits, G. J. M., Meinders, H. C., Photopolymerizable lacquers for laservision video discs, Philips Tech. Rev., 1982, 40: 298-309.
101. Terris, B. D., Mamin, H. J., Best, M. E. et al., Nanoscale replication for scanning probe data storage, Appl. Phys. Lett., 1996, 69(27): 4262-4264.
102. Rebhan, U., Endert, H., Zaal, G., Micromanufacturing benefits from excimer-laser development, Laser Focus World, 1994, 30(11): 91-96.
103. Weiss, S. A., Think small-lasers compete in micromachining, Photon Spectra, 1995, 29(10): 108-114.
104. Roberts, M. A., Rossier, J. S., Bercier, P. et al., UV laser machined polymer substrates for the development of microdiagnostic systems, Anal. Chem., 1997, 69(11): 2035-2042.
105. Kim, D. Y., Tripathy, S. K., Li, L. et al., Laser-induced holographic surface-relief gratings on nonlinear-optical polymer-films, Appl. Phys. Lett., 1995, 66(10): 1166-1168.
106. Mullenborn, M., Dirac, H., Petersen, J. W., Silicon nanostructures produced by laser direct etching, Appl. Phys. Lett., 1995, 66(22): 3001-3003.
107. Kramer, N., Niesten, M., Schonenberger, C., Resistless high-resolution optical lithography on silicon, Appl. Phys. Lett., 1995, 67(20): 2989-2991.
108. Döring, M., Ink-jet printing, Philips Tech. Rev., 1982, 40(7): 192-198.
109. Anczurowski, E., Oliver, J., Marchessault, R. H., New papers for new printers, Chem.Tech., 1986, 16(5): 304-310.
110. Blanchard, A. P., Kaiser, R. J., Hood, L. E., High-density oligonucleotide arrays, Biosens. Bioelectron., 1996, 11(6-7): 687-690.
111. Lemmo, A. V., Fisher, J. T., Geysen, H. M. et al., Characterization of an inkjet chemical microdispenser for combinatorial library synthesis, Anal. Chem., 1997, 69(4): 543-551.
112. Kumar, A., Whitesides, G. M., Features of gold having micrometer to centimeter dimensions can be formed through a combination of stamping with an elastomeric stamp and an alkanethiol "ink" followed by chemical etching, Appl. Phys. Lett., 1993, 63(14): 2002-2004.
113. Xia, Y. N., Kim, E., Zhao, X. M. et al., Complex optical surfaces formed by replica molding against elastomeric masters, Science, 1996, 273(5273): 347-349.
114. Zhao, X. M., Xia, Y. N., Whitesides, G. M., Fabrication of three-dimensional micro-structures: Microtransfer molding, Adv. Mater., 1996, 8(10): 837-840.
115. Kim, E., Xia, Y. N., Whitesides, G. M., Polymer microstructures formed by molding in capillaries, Nature, 1995, 376(6541): 581-584.
116. Kim, E., Xia, Y. N., Zhao, X. M. et al., Solvent-assisted microcontact molding: A convenient method for fabricating three-dimensional structures on surfaces of polymers, Adv. Mater., 1997, 9(8): 651-654.
117. Yuan, J. Y., Qu, L. T., Shi, G. Q. et al., Linear attangement of polypyrrole microcontainers, 2004, (8): 994-995.
118. Qin, D., Xia, Y. N., Rogers, J. A., Jackman, R. J. et al., Microfabrication, microstructures and microsystems. Microsystem technology in chemistry and life science, Topics in Current Chemistry, 1997, 194: 1-20.
119. Choi, S. J., Park, S. M., Electrochemical growth of nanosized conducting polymer wires on gold using molecular templates, Adv. Mater., 2000, 12(20): 1547-1549.
120. Jérôme, C., Jérôme, R., Electrochemical synthesis of polypyrrole nanowires, Angew. Chem. Int. Ed., 1998, 37(18): 2488-2490.
121. Huang, L. M., Wang, Z. B., Wang, H. T. et al., Polyaniline nanowires by electropolymerization from liquid crystalline phases, J. Mater. Chem., 2002, 12(2): 388-391.
122. Goren, M., Qi, Z. G., Lennox, R. B., Selective templated growth of polypyrrole strands on lipid tubule edges, Chem. Mater., 2000, 12(5): 1222-1228.
123. Shiratori, S. S., Mon, S., Ikezaki, K., Wire bonding over insulating substrates by electropolymerization of polypyrrole using a scanning micro-needle, Sensors and Actuators B, 1998, 49(1-2): 30-33.
124. Kondo, T., Ishii, A., Munekata, H., Nanoscale polydiacetylene wire structures prepared by molecular beam deposition on semiconductor substrates, Physica. E, 1998, 2(1-4): 991-995.