Planar nanogrinding of a fine grained WC-Co composite for an optical surface finish

International Journal of Advanced Manufacturing Technology

Volumn 26, Issue 7-8, 2005, Pages 766-773

  Yin, Ling ^a,b   Pickering, J P ^a   Ramesh, K ^a   Huang, H ^a,c   Spowage, A C ^a   Vancoille, E Y J ^a  

^a SINGAPORE INSTITUTE OF MANUFACTURING TECHNOLOGY   (Singapore)

^b TIANJIN UNIVERSITY   (China)

^c UNIVERSITY OF WESTERN AUSTRALIA   (Australia)

Author keywords

Diamond tools; Nanogrinding; Nanometre surface roughness; Planar mirrors; Submicron flatness; WC Co composite

Indexed keywords

ATOMIC FORCE MICROSCOPY; FINISHING; GRINDING (MACHINING); INTERFEROMETRY; NANOSTRUCTURED MATERIALS; SCANNING ELECTRON MICROSCOPY; SURFACE ROUGHNESS; SURFACE TREATMENT;

DIAMOND TOOLS; NANOGRINDING; NANOMETER SURFACE ROUGHNESS; PLANAR MIRRORS; SUBMICRON FLATNESS; WC-CO COMPOSITES;

METALLIC MATRIX COMPOSITES;

EID: 26644441467     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-004-2056-0     Document Type: Article

References (46)

1. Yin L, Spowage A, Ramesh K, et al. (2004) Influence of microstructure on ultraprecision grinding of cemented carbides. Int J Mach Tools Manuf 44:533-543
2. Suzuki H, Horiuchi O, Shibutani H, et al. (2001) Precision grinding of micro aspherical surface. In: Inasaki I (ed) Initiative of precision engineering at the beginning of a millennium. Kluwer, Boston, pp 361-365
3. Suzuki H, Higuchi T, Horiuchi O, et al. (2001) Precision cutting of micro none-axi-symmetric asperical surface with 3-axes controlled diamond tool. Proceedings of the 2nd euspen International Conference, Turin, Italy, pp 844-847
4. Suzuki H, Kitajima T, Okuyama S, et al. (1998) Precision grinding of micro aspherical surface - feasibility study of 250 μm aspherical grinding. Proceedings of the ASPE 1998 Annual Meeting, St. Louis, pp 149-152
5. Susuki H (1999) Study on precision cutting of none-axi-symmetric aspherical surface (1st report) - form generation by 3-axes controlled shaper with diamond tool. J Japan Soc Precis Eng 65(11):1611-1616
6. Hegeman JBJW, De Hosson JThM, de With G (2001) Grinding of WCCo hardmetals. Wear 248:187-196
7. Koshy P, Jain VK, Lal GK (1997) Grinding of cemented carbide with electrical spark assistance. J Mater Process Technol 72:61-68
8. Luo SY, Liao YS, Chou CC, et al. (1997) Analysis of the wear of a resin-bonded diamond wheel in the grinding of tungsten carbide. J Mater Process Technol 69:289-296
9. Luo SY, Liao YS, Chou CC, et al. (2001) Performance of power filled resin-bonded diamond wheels in the vertical dry grinding of tungsten carbide. J Mater Process Technol 118:329-336
10. Metzger JL, Torrance A (1990) Dry versus wet grinding of carbide. Ind Diamond Rev 6:296-303
11. Van J, Tamaki J, Syoji K. et al. (2003) Development of a novel ductile-machining system for fabrication axisymmetrical aspherical surfaces on brittle materials. Key Engineering Materials 238/239:43-48
12. Brinksmeier E, Preuß W (1997) Complex surfaces-applications and generation by diamond machining. Proceedings of the 1997 ASPE Annual Meeting, Norfolk, Virginia, USA, pp 33-36
13. Liu K. Li XP (2001) Ductile cutting of tungsten carbide. J Mater Process Technol 113:348-354
14. Liu K, Li XP, Rahman M, et al. (2003) CBN tool wear in ductile cutting of tungsten carbide. Wear 255:1344-1351
15. Golini D, Dumas P, Kordonski W (1998) Precision optics fabrication using magnetorherological finishing. Proceedings of the ASPE 1998 Annual Meeting, St. Louis, p 597
16. Pollicove H, Golini D (2003) Deterministic manufacturing processes for precision optical surfaces. Key Eng Mater 238/239:53-58
17. Jacobs SD, Arrasmith SR, Kozhinova IA, et al. (1999) MRF: computer-controlled Optics manufacturing. Ceram Bull 78(12):42-48
18. Ohmori H, Dai Y, Lin W, et al. (2003) Force characteristics and deformation behaviors of sintered SIC during an ELID grinding process. Key Eng Mater 238/239:65-70
19. Suzuki T, Ohmori H, Dai Y, et al. (2003) Ultraprecision fabrication of glass ceramic aspherical mirrors by ELID-grinding with a nano-level positioning hydrostatic drive system. Key Eng Mater 238/239:49-52
20. Uehara Y, Ohmoru H, Yamagata Y. et al. (2003) Grinding characteristics of solid immersion mirrors with the ELID grinding method. Key Eng Mater 238/239:83-88
21. Lim J-D, Lee E-S (1999) A study of the mirror-like grinding of sintered carbide with optimum in-process electrolytic dressing. Int J Adv Manuf Technol 15:615-623
22. Gatzen HH, Maetzig JC, Ruhbach LP (1997) Ultraprecision grinding of high aspect ratio microparts. Proceedings of the 1997 ASPE Annual Meeting, Norfolk, Virginia, pp 454-457
23. Zhong Z, Nakagawa T (1992) New grinding methods for aspheric mirrors with large curvature radii. Ann CIPR 41(1):335-338
24. Yin L, Vancoille EYJ, Lee LC, et al. (2003) High-precision low-damage grinding of a polycrystalline SiC. Key Eng Mater 238/239:59-64
25. Yin L, Vancoille EYJ, Lee LC, et al. (2004) High-quality grinding of polycrystalline silicon carbide spherical surfaces. Wear 256:197-207
26. Stephenson DJ, Vaselovac D, Manley S. et al. (2001) Ultra-precision grinding of hard steels. Precis Eng 25(4):336-345
27. Tönshoff HK, Denkena B, Friemuth T, et al. (2003) Precision grinding of components for aerostatic micro guidance. Precis Eng 27:185-188
28. Kuriyagawa T, Zahmaty MSS, Syoji K (1996) A new grinding method for aspheric ceramic mirrors. J Mater Process Technol 62:387-392
29. Gatzen HH, Maetzig JC (1997) Nanogrinding. Precis Eng 21:134-139
30. Komanduri R (1996) On material removal mechanisms in (wishing of advanced ceramics and glasses. Ann CIRP 45(1):509-513
31. Komanduri R, Lucca DA, Tani Y (1997) Technological advances in fine abrasive processes. Ann CIRP 46(2):546-596
32. Yin L, Huang H (2004) Ceramic response to high speed grinding. Mach Sci Technol 8(1):21-37
33. Yin L, Ives LK, Jahanmir S (2004) Effects of fluids on the simulated clinical-dental machining of a glass ceramics. J Amer Ceram Soc 87(1):173-175
34. Yin L, Huang H, Chen WK (2004) Influences of nano scale abrasive suspensions on the polishing of fiber optic connectors. Int J Adv Manuf Technol. in press
35. Yin L, Jahanmir S, Ives LK (2003) Abrasive machining of porcelain and zirconia with a dental handpiece. Wear 255:975-989
36. Yin L, Ives LK, Jahanmir S, et al. (2001) Abrasive machining of glass-infiltrated alumina with diamond burs. Mach Sci Technol 5(1):209-233
37. Dong X, Yin L, Jahanmir S, et al. (2000) Abrasive machining of glass-ceramics with a dental handpiece. Mach Sci Technol 4(2):209-233
38. Huang H, Yin L, Zhou L (2003) High speed grinding of silicon carbide with resin bond diamond wheels. J Mater Process Technol 141(3):329-336
39. Taniguchi N (1996) Nanotechnology-integrated processing systems for ultra-precision and ultra-fine produces. Oxford Science Publications, Oxford
40. Corbett J, McKeown PA, Peggs GN, et al. (2000) Nanotechnology: international development and emerging products. Ann CIRP 49(2):523-545
41. McKeown P (1987) High precision manufacturing in an advanced industrial economy. Proceedings of the Fourth International Precision Engineering Seminar, Carnfield, UK, pp 1-19
42. McKeown P (1996) Viewpoint - from micro- to nano-machining - towards the nanometre era. Sens Rev 16(2):4-10
43. Zhou L, Shimizu J. Shinohara K, et al. (2003) Three-dimensional kinematical analyses for surface grinding of large scale substrate. Precis Eng 27:175-184
44. Yin L, Vancoille EYJ, Ramesh K, et al. (2004) Ultraprecision grinding of tungsten carbide for spherical mirrors. Proc Inst Mech Engrs Part B: J Eng Manuf 218(4):419-429
45. Tso P-L, Teng C-C (1999) Influence of kinematic characteristics on grinding ultra-precision substrates. ASME Manuf Sci Eng MED 10:423-429
46. Zarudi I, Zhang LC (2002) A revisit to some wheel-workpiece interaction problems in surface grinding. Int J Mach Tools Manuf 42:905-913