-
1
-
-
0022074551
-
Kinematic analysis of workpart fixturing for flexible assembly with automatically reconfigurable fixtures
-
Asada, H. and By, A. B. Kinematic analysis of workpart fixturing for flexible assembly with automatically reconfigurable fixtures. IEEE Trans. Robotics and Automn, 1985, 1(2), 86-93.
-
(1985)
IEEE Trans. Robotics and Automn
, vol.1
, Issue.2
, pp. 86-93
-
-
Asada, H.1
By, A.B.2
-
2
-
-
0030216880
-
Deformable sheet metal fixturing: Principles, algorithms, and simulation
-
Cai, W., Hu, S. J., and Yuan, J. X. Deformable sheet metal fixturing: principles, algorithms, and simulation. Trans. ASME, J. Mfg Sci. Engng, 1996, 118, 318-324.
-
(1996)
Trans. ASME, J. Mfg Sci. Engng
, vol.118
, pp. 318-324
-
-
Cai, W.1
Hu, S.J.2
Yuan, J.X.3
-
4
-
-
0038738021
-
Contact force prediction and force closure analysis of a fixtured rigid workpiece with friction
-
Wang, M. Y. and Pelinescu, D. M. Contact force prediction and force closure analysis of a fixtured rigid workpiece with friction. Trans. ASME, J. Mfg Sci. Engng, 2003, 125(2), 325-332.
-
(2003)
Trans. ASME, J. Mfg Sci. Engng
, vol.125
, Issue.2
, pp. 325-332
-
-
Wang, M.Y.1
Pelinescu, D.M.2
-
5
-
-
0035356992
-
Optimizing fixture layout in a point-set domain
-
Wang, M. Y. and Pelinescu, D. M. Optimizing fixture layout in a point-set domain. IEEE Trans. Robotics and Automn, 2001, 17(3), 312-323.
-
(2001)
IEEE Trans. Robotics and Automn
, vol.17
, Issue.3
, pp. 312-323
-
-
Wang, M.Y.1
Pelinescu, D.M.2
-
6
-
-
0032660572
-
On the dynamic stability of grasping
-
Xiong, C. H., Li, Y. F., Ding, H., and Xiong, Y. L. On the dynamic stability of grasping. Int. J. Robotics Res., 1999, 18(9), 951-958.
-
(1999)
Int. J. Robotics Res.
, vol.18
, Issue.9
, pp. 951-958
-
-
Xiong, C.H.1
Li, Y.F.2
Ding, H.3
Xiong, Y.L.4
-
7
-
-
0036814919
-
Qualitative analysis and quantitative evaluation of fixturing
-
Xiong, C. H., Li, Y. F., Rong, Y., and Xiong, Y. L. Qualitative analysis and quantitative evaluation of fixturing. Robotics and Computer Integrated Mfg, 2002, 18(5-6), 335-342.
-
(2002)
Robotics and Computer Integrated Mfg
, vol.18
, Issue.5-6
, pp. 335-342
-
-
Xiong, C.H.1
Li, Y.F.2
Rong, Y.3
Xiong, Y.L.4
-
8
-
-
0032047386
-
Stability index and contact configuration planning for multifingered grasp
-
Xiong, C. H. and Xiong, Y. L. Stability index and contact configuration planning for multifingered grasp. J. Robotic Systems, 1998, 15(4), 183-190.
-
(1998)
J. Robotic Systems
, vol.15
, Issue.4
, pp. 183-190
-
-
Xiong, C.H.1
Xiong, Y.L.2
-
9
-
-
0026818123
-
Dextrous manipulation with compliance and sliding
-
Kao, I. and Cutkosky, M. R. Dextrous manipulation with compliance and sliding. Int. J. Robotics Res., 1992, 12(1), 20-40.
-
(1992)
Int. J. Robotics Res.
, vol.12
, Issue.1
, pp. 20-40
-
-
Kao, I.1
Cutkosky, M.R.2
-
11
-
-
0032645937
-
Modeling of contact mechanics and friction limit surface for soft fingers with experimental results
-
Xydas, N. and Kao, I. Modeling of contact mechanics and friction limit surface for soft fingers with experimental results. Int. J. Robotics Res., 1999, 18(9), 941-950.
-
(1999)
Int. J. Robotics Res.
, vol.18
, Issue.9
, pp. 941-950
-
-
Xydas, N.1
Kao, I.2
-
12
-
-
0003654667
-
-
CRC Press, Boca Raton, Florida
-
Murray, R. M., Li, Z., and Sastry, S. S. A Mathematical Introduction to Robotic Manipulation, 1994 (CRC Press, Boca Raton, Florida).
-
(1994)
A Mathematical Introduction to Robotic Manipulation
-
-
Murray, R.M.1
Li, Z.2
Sastry, S.S.3
-
13
-
-
0024032089
-
Constructing force-closure grasps
-
Nguyen, V. D. Constructing force-closure grasps. Int. J. Robotics Res., 1988, 7(3), 3-16.
-
(1988)
Int. J. Robotics Res.
, vol.7
, Issue.3
, pp. 3-16
-
-
Nguyen, V.D.1
-
14
-
-
0029491251
-
On computing three-finger force-closure grasps of polygonal objects
-
Ponce, J. and Faverjon, B. On computing three-finger force-closure grasps of polygonal objects. IEEE Trans. Robotics and Automn, 1995, 11(6), 868-881.
-
(1995)
IEEE Trans. Robotics and Automn
, vol.11
, Issue.6
, pp. 868-881
-
-
Ponce, J.1
Faverjon, B.2
-
15
-
-
0034471281
-
A stiffness-based quality measure for compliant grasps and fixtures
-
Lin, Q., Burdick, J. W., and Rimon, E. A stiffness-based quality measure for compliant grasps and fixtures. IEEE Trans. Robotics and Automn, 2000, 17(5), 679-697.
-
(2000)
IEEE Trans. Robotics and Automn
, vol.17
, Issue.5
, pp. 679-697
-
-
Lin, Q.1
Burdick, J.W.2
Rimon, E.3
-
17
-
-
0034828877
-
Manipulation of enveloped object with elasticity at contact points
-
Soft Research Park, Fukuoka, Japan
-
Harada, K., Park, J., and Kaneko, M. Manipulation of enveloped object with elasticity at contact points. In Proceedings of the 4th IEEE International Symposium on Assembly and Task Planning, Soft Research Park, Fukuoka, Japan, 2001, pp. 190-195.
-
(2001)
Proceedings of the 4th IEEE International Symposium on Assembly and Task Planning
, pp. 190-195
-
-
Harada, K.1
Park, J.2
Kaneko, M.3
-
18
-
-
0034472729
-
Hands for deterous manipulation and robust grasping: A difficult road toward simplicity
-
Bicchi, A. Hands for deterous manipulation and robust grasping: a difficult road toward simplicity. IEEE Trans. Robotics and Automn, 2000, 16(6), 652-662.
-
(2000)
IEEE Trans. Robotics and Automn
, vol.16
, Issue.6
, pp. 652-662
-
-
Bicchi, A.1
-
19
-
-
0028467683
-
On the problem of decomposing grasp and manipulation forces in multiple whole-limb manipulation
-
Bicchi, A. On the problem of decomposing grasp and manipulation forces in multiple whole-limb manipulation. Robotics and Autonomous Systems, 1994, 13, 127-147.
-
(1994)
Robotics and Autonomous Systems
, vol.13
, pp. 127-147
-
-
Bicchi, A.1
-
20
-
-
0035560163
-
Analysis of frictional forces in indeterminate enveloping grasps
-
Maui, Hawaii
-
Park, J., Harada, K., and Kaneko, M. Analysis of frictional forces in indeterminate enveloping grasps. In Proceedings of the 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems, Maui, Hawaii, 2001, pp. 1882-1887.
-
(2001)
Proceedings of the 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems
, pp. 1882-1887
-
-
Park, J.1
Harada, K.2
Kaneko, M.3
-
21
-
-
1842541801
-
Force closure of fixturing/grasping with passive contacts
-
Coimbra, Portugal, 30 June-3 July
-
Xiong, C. H., Wang, M. Y., Rong, K., and Xiong, Y. L. Force closure of fixturing/grasping with passive contacts. In Proceedings of the 11th International Conference on Advanced Robotics 2003, Coimbra, Portugal, 30 June-3 July 2003.
-
(2003)
Proceedings of the 11th International Conference on Advanced Robotics 2003
-
-
Xiong, C.H.1
Wang, M.Y.2
Rong, K.3
Xiong, Y.L.4
-
22
-
-
0025376643
-
The geometry of grasping
-
Markenscoff, X., Ni, L., and Papadimitriou, C. H. The geometry of grasping. Int. J. Robotics Res., 1990, 9(1), 61-74.
-
(1990)
Int. J. Robotics Res.
, vol.9
, Issue.1
, pp. 61-74
-
-
Markenscoff, X.1
Ni, L.2
Papadimitriou, C.H.3
-
24
-
-
0034867416
-
Rigid body analysis of power grasps: Bounds of the indeterminate grasp force
-
Seoul, Korea
-
Omata, T. Rigid body analysis of power grasps: bounds of the indeterminate grasp force. In Proceedings of the International Conference on Robotics and Automation, Seoul, Korea, 2001, pp. 2203-2209.
-
(2001)
Proceedings of the International Conference on Robotics and Automation
, pp. 2203-2209
-
-
Omata, T.1
-
25
-
-
0026817586
-
A contact stress model for multifingered grasps of rough objects
-
Sinha, P. R. and Abel, J. M. A contact stress model for multifingered grasps of rough objects. IEEE Trans. Robotics and Automn, 1992, 8(1), 7-22.
-
(1992)
IEEE Trans. Robotics and Automn
, vol.8
, Issue.1
, pp. 7-22
-
-
Sinha, P.R.1
Abel, J.M.2
-
26
-
-
0030214660
-
The application of meta functions to the quasi-static analysis of workpiece displacement within a machining fixture
-
Hockenberger, M. J. and De Meter, E. C. The application of meta functions to the quasi-static analysis of workpiece displacement within a machining fixture. Trans. ASME, J. Mfg Sci. Engng, 1996, 118, 325-331.
-
(1996)
Trans. ASME, J. Mfg Sci. Engng
, vol.118
, pp. 325-331
-
-
Hockenberger, M.J.1
De Meter, E.C.2
-
27
-
-
0011711572
-
Improved algorithm for tolerance-based stiffness optimization of machining fixtures
-
Hurtado, S. F. and Melkote, S. N. Improved algorithm for tolerance-based stiffness optimization of machining fixtures. Trans. ASME, J. Mfg Sci. Engng, 2001, 123, 720-730.
-
(2001)
Trans. ASME, J. Mfg Sci. Engng
, vol.123
, pp. 720-730
-
-
Hurtado, S.F.1
Melkote, S.N.2
-
28
-
-
0032598266
-
An elastic contact model for the prediction of workpiece-fixture contact forces in clamping
-
Li, B. and Melkote, S. N. An elastic contact model for the prediction of workpiece-fixture contact forces in clamping. Trans. ASME, J. Mfg Sci. Engng, 1999, 121, 485-493.
-
(1999)
Trans. ASME, J. Mfg Sci. Engng
, vol.121
, pp. 485-493
-
-
Li, B.1
Melkote, S.N.2
-
29
-
-
0032669538
-
Automatic generation of dynamic clamping forces for machining fixtures
-
Tao, Z. J., Kumar, A. S., and Nee, A. Y. C. Automatic generation of dynamic clamping forces for machining fixtures. Int. J. Prod. Res., 1999, 37(12), 2755-2776.
-
(1999)
Int. J. Prod. Res.
, vol.37
, Issue.12
, pp. 2755-2776
-
-
Tao, Z.J.1
Kumar, A.S.2
Nee, A.Y.C.3
-
30
-
-
0028445577
-
Simulation of mechanical systems with multiple frictional contacts
-
Wang, Y. T. and Kumar, V. Simulation of mechanical systems with multiple frictional contacts. Trans. ASME, J. Mech. Des., 1994, 116, 571-580.
-
(1994)
Trans. ASME, J. Mech. Des.
, vol.116
, pp. 571-580
-
-
Wang, Y.T.1
Kumar, V.2
-
31
-
-
0000172154
-
An elasto-dynamic model of frictional contact and its influence on the dynamics of a workpiece-fixture system
-
Fang, B., DeVor, R. E., and Kapoor, S. G. An elasto-dynamic model of frictional contact and its influence on the dynamics of a workpiece-fixture system. Trans. ASME, J. Mfg Sci. Engng, 2001, 123, 481-489.
-
(2001)
Trans. ASME, J. Mfg Sci. Engng
, vol.123
, pp. 481-489
-
-
Fang, B.1
Devor, R.E.2
Kapoor, S.G.3
-
32
-
-
85040875608
-
-
Cambridge University Press, New York
-
Johnson, K. L. Contact Mechanics, 1985 (Cambridge University Press, New York).
-
(1985)
Contact Mechanics
-
-
Johnson, K.L.1
-
33
-
-
0036038339
-
Geometric variation prediction of automotive assembly
-
Xiong, C. H., Rong, Y., Koganti, R. P., Zaluzec, M. J., and Wang, N. Geometric variation prediction of automotive assembly. Assembly Automn, 2002, 22(3), 260-269.
-
(2002)
Assembly Automn
, vol.22
, Issue.3
, pp. 260-269
-
-
Xiong, C.H.1
Rong, Y.2
Koganti, R.P.3
Zaluzec, M.J.4
Wang, N.5
|