Feasibility of depth profiling of Zn-based coatings by laser ablation inductively coupled plasma optical emission and mass spectrometry using infrared Nd:YAG and ArF* lasers

Spectrochimica Acta - Part B Atomic Spectroscopy

Volumn 60, Issue 3, 2005, Pages 307-318

  Hrdlička, Aleš ^a   Otruba, Vítězslav ^a   Novotný, Karel ^a   Günther, Detlef ^b   Kanický, Viktor ^a  

^a MASARYK UNIVERSITY   (Czech Republic)

^b LABORATORY OF INORGANIC CHEMISTRY   (Switzerland)

Author keywords

Atomic emission spectrometry; Depth profiling; Inductively coupled plasma; Laser ablation; Mass spectrometry; Zinc coated sheet

Indexed keywords

AUGER ELECTRON SPECTROSCOPY; ENERGY DISPERSIVE SPECTROSCOPY; INDUCTIVELY COUPLED PLASMA; LASER ABLATION; LIGHT EMISSION; MASS SPECTROMETRY; NEODYMIUM LASERS; ZINC;

ATOMIC EMISSION SPECTROMETRY; DEPTH PROFILING; TOTAL REFLECTION X-RAY FLUORESCENCE SPECTROMETRY (TXRF); ZINC COATED SHEETS;

COATINGS;

EID: 16444369449     PISSN: 05848547     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.sab.2005.02.001     Document Type: Conference Paper

References (35)

1. C. Wang, F. Jiang, and F. Wang The characterization and corrosion resistance of cerium chemical conversion coatings for 304 stainless steel Corros. Sci. 46 2004 75 89
2. R. Balkova, J. Zemek, V. Cech, J. Vanek, and R. Přikryl XPS study of siloxane plasma polymer films Surf. Coat. Technol. 174-175 2003 1159 1163
3. S.-T. Lin, Y.-L. Kuo, and C. Lee Characteristics of sputtered TaBx thin films as diffusion barriers between copper and silicon Appl. Surf. Sci. 220 2003 349 358
4. S. Oswald, and S. Baunack Comparison of depth profiling techniques using ion sputtering from the practical point of view Thin Solid Films 425 2003 9 19
5. R. Klockenkamper, H.W. Becker, H. Bubert, H. Jenett, and A. von Bohlen Depth profiles of a shallow implanted layer in a Si wafer determined by different methods of thin-layer analysis Spectrochim. Acta, Part B: Atom. Spectrosc. 57 2002 1593 1599
6. J. Gao, E. Liu, D.L. Butler, and A. Zeng Compositional depth profile analysis of coatings on hard disks by X-ray photoelectron spectroscopy and imaging Surf. Coat. Technol. 176 2003 93 102
7. J. Pisonero, C. Perez, R. Pereiro, N. Bordel, and A. Sanz-Medel In-depth profile analysis by radiofrequency glow discharge optical emission spectrometry using pressure as variable parameter J. Anal. At. Spectrom. 16 2001 370 375
8. J. Pisonero, J.M. Costa, R. Pereiro, N. Bordel, and A. Sanz-Medel Characterization of a simple glow discharge coupled to a time of flight mass spectrometer for in-depth profile analysis J. Anal. At. Spectrom. 17 2002 1126 1131
9. C. Deraed, and G. Backhaus High-frequency glow-discharge spectroscopy for surface analysis LaborPraxis 24 2000 40 44
10. V. Hoffmann, R. Dorka, L. Wilken, V.-D. Hodoroaba, and K. Wetzig Present possibilities of thin-layer analysis by GDOES Surf. Interface Anal. 35 2003 575 582
11. E. Vander Putten, F. Dehairs, L. Andre, and W. Baeyens Quantitative in situ microanalysis of minor and trace elements in biogenic calcite using infrared laser ablation- inductively coupled plasma mass spectrometry: a critical evaluation Anal. Chim. Acta 378 1999 261 272
12. J.D. Robertson, H. Neff, and B. Higgins Microanalysis of ceramics with PIXE and LA-ICP-MS Nucl. Instrum. Meth. B 189 2002 378 381
13. S.F. Durrant Laser ablation inductively coupled plasma mass spectrometry: achievements, problems, prospects J. Anal. At. Spectrom. 14 1999 1385 1403
14. H.E. Bauer, F. Leis, and K. Niemax Laser induced breakdown spectrometry with echelle spectrometer and intensified charge coupled device detection Spectrochim. Acta, Part B: Atom. Spectrosc. 53 1998 1815 1825
15. D. Bleiner, P. Lienemann, A. Ulrich, H. Vonmont, and A. Wichser Spatially resolved quantitative profiling of compositionally graded perovskite layers using laser ablation-inductively coupled plasma mass spectrometry J. Anal. At. Spectrom. 18 2003 1146 1153
16. A. Jurado-López, and M.D. Luque de Castro Laser-induced breakdown spectrometry in the jewellery industry: Part I. Determination of the layer thickness and composition of gold-plated pieces J. Anal. At. Spectrom. 17 2002 544 547
17. A. Jurado-López, and M.D. Luque de Castro Laser-induced breakdown spectrometry in the jewellery industry: Part II. Quantitative characterisation of goldfilled interface Talanta 59 2003 409 415
18. A. Yariv Quantum electronics 1989 J. Wiley & Sons New York
19. W. Koechner Solid-state laser engineering 1992 Springer-Verlag Berlin
20. L. St.-Onge A mathematical framework for modeling the compositional depth profiles obtained by pulsed laser ablation J. Anal. At. Spectrom. 17 2002 1083 1089
21. A.J.G. Mank, and P.R.D. Mason A critical assessment of laser ablation ICP-MS as an analytical tool for depth analysis in silica-based glass samples J. Anal. At. Spectrom. 14 1999 1143 1153
22. O.V. Borisov, X. Mao, and R.E. Russo Effects of crater development on fractionation and signal intensity during laser ablation inductively coupled plasma mass spectrometry Spectrochim. Acta, Part B: Atom. Spectrosc. 55 2000 1693 1704
23. D. Bleiner, A. Plotnikov, C. Vogt, K. Wetzig, and D. Günther Depth profile analysis of various titanium based coatings on steel and tungsten carbide using laser ablation inductively coupled plasma-time of flight mass spectrometry Fresenius' J. Anal. Chem. 368 2000 221 226
24. S.M. Eggins, L.P.J. Kinsley, and J.M.G. Shelley Deposition and element fractionation processes during atmospheric pressure laser sampling for analysis by ICP-MS Appl. Surf. Sci. 127-129 1998 278 286
25. D. Günther, and C.H. Heinrich Enhanced sensitivity in laser ablation inductively coupled plasma mass spectrometry using He-Ar mixtures as aerosol carrier J. Anal. At. Spectrom. 14 1999 1363 1368
26. J.M. Vadillo, C.C. García, S. Palanco, and J.J. Laserna Nanometric range depth-resolved analysis of coated steels using laser-induced breakdown spectrometry with a 308 nm collimated beam J. Anal. At. Spectrom. 13 1998 793 797
27. X. Liu, D. Du, and G. Mourou Laser ablation and micromachining with ultrashort laser pulses IEEE J. Quantum Electron. 33 1997 1706 1716
28. M. von Allmen, and A. Blatter Laser-Beam Interactions with Materials 1995 Springer Verlag Berlin 102
29. K. Shimizu, H. Habazaki, P. Skeldon, G.E. Thompson, and R.K. Marcus Influence of interfacial depth on depth resolution during GDOES depth profiling analysis of thin alumina films Surf. Interface Anal. 31 2001 869 873
30. M.P. Mateo, J.M. Vadillo, and J.J. Laserna Irradiance-dependent depth profiling of layered materials using laser-induced plasma spectrometry J. Anal. At. Spectrom. 16 2001 1317 1321
31. A. Plotnikov, C. Vogt, V. Hoffmann, C. Taeschner, and K. Wetzig Application of laser ablation inductively coupled plasma quadrupole mass spectrometry (LA-ICP-QMS) for depth profile analysis J. Anal. At. Spectrom. 16 2001 1290 1295
32. F. Präßler, V. Hoffmann, J. Schumann, and K. Wetzig Comparison of depth resolution for direct current and radiofrequency modes in glow discharge optical emission spectrometry J. Anal. At. Spectrom. 10 1995 677 680
33. D. Günther, R. Frischknecht, C.A. Heinrich, and H.J. Kahlert Capabilities of an argon fluoride 193 nm excimer laser ablation inductively coupled plasma mass spectrometry microanalysis of geological materials J. Anal. At. Spectrom. 12 1997 939 944
34. V. Kanický, H.-R. Kuhn, and D. Günther Depth profile studies of ZrTiN coatings by laser ablation inductively coupled plasma mass spectrometry Anal. Bioanal. Chem. 380 2004 218 226
35. Z. Weiss, Analysis of Zn based coatings on steel, GD-Emission spectrometry systems, Application report 98-7P, LECO Pilsen CZ.