Piezoelectric ceramics and composites via rapid prototyping techniques

Rapid Prototyping Journal

Volumn 4, Issue 1, 1998, Pages 37-49

  Bandyopadhyay, A ^a   Panda, R K ^a   McNulty, T F ^a   Mohammadi, F ^a   Danforth, S C ^a   Safari, A ^a  

^a RUTGERS UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; COMPOSITE MATERIALS; DEPOSITION; LEAD COMPOUNDS; RAPID PROTOTYPING;

FUSED DEPOSITION;

PIEZOELECTRIC MATERIALS;

EID: 0031706409     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/13552549810200285     Document Type: Article

References (33)

1. Agarwala, M.K., Bandyopadhyay, A., van Weeren, R., Whalen, P., Safari, A. and Danforth, S.C. (1996), "Fused deposition of ceramics: rapid fabrication of structural ceramic components," American Ceramic Bulletin, Vol. 11, pp. 60-5.
2. Agarwala, M.K., van Weeren, R., Vaidyanathan, R., Bandyopadhyay, A., Carrasquilo, G., Jamalabad, V., Langarana, N., Safari, A., Garofilini, S.H., Danforth, S.C., Burlew, J., Donaldson, R., Whalen, P. and Ballard, C. (1995), "Structural ceramics by fused deposition of ceramics," in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Volume 1995, edited by The University of Texas at Austin, Austin, Texas, pp. 1-8.
3. Bandyopadhyay, A., Panda, R.K., Janas, V.F., Danforth, S.C. and Safari, A. (1996a), "Processing of piezocomposites via solid freeform fabrication techniques," in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, D.L. and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Volume 1996, edited by The University of Texas at Austin, Austin, Texas, pp. 265-72.
4. Bandyopadhyay, A., Panda, R., Janas, V.F., Agarwala, M.K., Danforth, S.C. and Safari, A. (1997)," Processing of piezocomposites by fused deposition technique," Journal of the American Ceramic Society, Vol. 80, pp. 1366-72.
5. Bandyopadhyay, A., Panda, R.K., Janas, V.F., Agarwala, M.K., van Weeren, R., Danforth, S.C. and Safari, A. (1996b), " Processing of piezocomposites by fused deposition technique," in Kulwicki, B., Amin, A. and Safari, A. (Eds), Proceedings of the 10th IEEE International Conference on Applications of Ferroelectrics, Brunswick, NJ, pp. 999-1003.
6. Brown, L.F. (1992), "Ferroelectric polymers: current and future ultrasonic applications," in Proceedings 1992 IEEE Ultrasonics Symposium, Institute of Electrical and Electronic Engineers, Piscataway, NJ, pp. 539-50.
7. Cady, W.G. (1946), Piezoelectricity, McGraw-Hill, New York, NY.
8. Cawley, J.D., Wei, P., Liu, Z.E., Newman, W.S., Mathewson, B.B. and Heuer, A.H. (1995), "Al203 ceramics made by CAM-LEM technology," in Marcus, H.L., Beaman, J.J., Barlow, J.W., Bourell, and Crawford, R.H. (Eds), Proceedings of the Solid Freeform Fabrication Symposium, Volume 1995, The University of Texas at Austin, Austin, Texas, pp. 9-16.
9. Danforth, S.C. and Safari, A. (1996), "Solid free form fabrication: novel manufacturing opportunities for electroceramics," in Kulwicki, B., Amin, A. and Safari, A. (Eds), Proceedings of 10th IEEE International Symposium on Application of Ferroelectrics, Brunswick, NJ.
10. Furukawa, T. (1990), " Recent advances in ferroelectric polymers," Ferroelectrics, Vol. 104, pp. 229-40.
11. Gentilman, R.L., Fiore, D.F., Pham, H.T., French, K.W and Bowen, L.J. (1994), " Fabrication and properties of 1-3 PZT-polymer composites," in Bhalla, A.S., Nair, K.M. Lloyd, I.K., Yanagida, H. and Payne, D.A. (Eds), Ceramic Transactions, Vol. 43, Ferroic Materials: Design, Preparation, and Characteristics, American Ceramic Society, Westerville, OH, p. 239.
12. Gentilman, R.L., Fiore, D.F., Pham-Nguyen, H.T., Serwatka, W. and Bowen, L.J. (1995), "Manufacturing of 1-3 Piezocomposite SonoPanelTM," SPIE Proceedings, 2447, Society of Photo-Optical Engineers, Bellingham, WA, p. 274.
13. Griffin, C.W., Daufenbach, J. and McMillin, S. (1994), "Desktop manufacturing: LOM versus pressing," American Ceramic Society Bulletin, Vol. 73 No. 8, pp. 109-13.
14. Gururaja, T.R. (1994), "Piezoelectrics transducers for medical ultrasonic imaging," American Ceramic Society Bulletin, Vol. 73 No. 5, pp. 50-55.
15. Gururaja, T.R., Safari, A., Newnhan, R.E. and Cross, L.E. (1987), "Piezoelectric ceramic-polymer composites for transducer applications," in Levinson, L.M. (Ed.), Electronic Ceramics, Marcell-Dekker, New York, NY, pp. 92-145.
16. Janas, V.F. and Safari, A. (1995), "Overview of fine-scale piezoelectric ceramic/polymer composite processing," Journal of the American Ceramic Society, Vol. 78 No. 11, pp. 2945-55.
17. Klicker, K.A., Biggers, J.V. and Newnham, R.E. (1981), "Composites of PZT and epoxy for hydrostatic transducer applications," Journal of the American Ceramic Society, Vol. 64 No. 1, p. 5.
18. Lubitz, K., Wolff, A. and Preu, G. (1992), "New piezoelectric composites for ultrasonic transducers," Ferroelectrics, Vol. 133, p. 21.
19. McNulty, T.F., Janas, V.F. and Safari, A. (1995), "Novel 1-3 piezoelectric ceramic/polymer composites using the honeycomb support method," Journal of the American Ceramic Society, Vol. 78 No. 11, p. 2913.
20. Miyashita, M., Takano, K. and Toda, T. (1980), "Preparation and properties of PZT ceramics with ladder type structure," Ferroelectrics, Vol. 28, pp. 397-400.
21. Murcus, H.L., Beaman, J., Burlow, J.W. and Bourell, D.L. (1990), JOM, Vol. 42 No. 2, pp. 8-10.
22. Newnham, R.E., Skinner, D.P. and Cross, L.E. (1978), "Connectivity and piezoelectric-pyroelectric composites," Materials Research Bulletin, Vol. 13, pp. 525-36.
23. Park, S.-E. and Shrout, T.R. (1996), "Characteristics of relaxor-based piezoelectric single crystals for ultrasonic transducers," in Levy, M., Schneider, S.C. and McAvoy, B.R. (Eds), IEEE Ultrasonics Symposium Proceedings, San Antonio, TX, pp. 935-42.
24. Pilgrim, S.M., Newnham, R.E. and Rohlfing, L.L. (1987), "An extension of the composite nomenclature scheme," Materials Research Bulletin, Vol. 22, pp. 677-84.
25. Rittenmyer, K., Shrout, T.R., Schulze, W.A. and Newnham, R.E. (1982), "Piezoelectric 3-3 composite ferroelectrics," Ferroelectrics, Vol. 41, pp. 189-95.
26. Sachs, E., Cima, M., Bredt, J. and Curodeau, A. (1992), "CAD-casting: the direct fabrication of ceramic shells and cores by three dimensional printing," Manufacturing Review, Vol. 5 No. 2, pp 118-26.
27. Safari, A. (1994), "Development of piezoelectric composites for transducers," Journal of Physics III, Vol. 4 No. 7, pp. 1129-49.
28. Safari, A., Janas, V.F. and Panda, R.K. (1996), "Fabrication of fine-scale 1-3 Pb(ZrxTi1-x)03 ceramic/polymer composites using a modified lost mold method," SPIE Proceedings, 2721, Society of Photo-Optical Engineers, Bellingham, WA, p. 251.
29. Savakus, H.P., Klicker, K.A. and Newnham, R.E. (1981), "PZT-epoxy piezoelectric transducers: a simplified fabrication procedure," Materials Research Bulletin, Vol. 16, p 677.
30. Shrout, T., Schulze, W.A. and Biggers, J.V. (1979), "Simplified fabrication of PZT/polymer composites," Materials Research Bulletin, Vol. 14, pp. 1553-59.
31. Skinner, D.P., Newnham, R.E. and Cross, L.E. (1978), "Flexible composite transducers," Materials Research Bulletin, Vol. 13, pp. 599-607.
32. Waller, D.J. and Safari, A. (1992), "Piezoelectric lead zirconate titanate ceramic fiber/polymer composites," Journal of the American Ceramic Society, Vol. 75 No. 6, pp. 1648-55.
33. Yoshikawa, S., Selvaraj, U., Moses, P., Jiang, Q. and Shrout, T. (1994), "Pb(Zr, Ti)03 [PZT] fibers-fabrication and properties," Ferroelectrics, Vol. 154, p. 325.