Transformation-toughened ceramic multilayers with compositional gradients

Journal of the American Ceramic Society

Volumn 81, Issue 1, 1998, Pages 21-32

  Yoo, Jaedeok ^a,b   Cho, Kyung Mox ^a,b,c   Bae, Won Sang ^a,c   Cima, Michael ^a,b   Suresh, Subra ^a,b  

^a Massachusetts Institute of Technology Cambridge   (United States)

^b AMERICAN CERAMIC SOCIETY   (United States)

^c Pusan National University   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; BENDING STRENGTH; CALCULATIONS; COMPOSITION; MATERIALS TESTING; MICROSTRUCTURE; PHASE TRANSITIONS; PROCESSING; RESIDUAL STRESSES; THERMAL EXPANSION; X RAY DIFFRACTION ANALYSIS; ZIRCONIA;

COMPOSITIONAL GRADIENT; PLATE THEORY FORMULATION; SURFACE COMPRESSION; THERMOMECHANICAL CHARACTERISTICS; THREE DIMENSIONAL PRINTING; ZIRCONIA TOUGHENED ALUMINA MULTILAYER;

MULTILAYERS;

EID: 0031649588     PISSN: 00027820     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1151-2916.1998.tb02291.x     Document Type: Article

References (38)

1. A. Mortensen and S. Suresh, "Functionally Graded Metals and Metal Ceramic Composites: Part I, Processing," Int. Mater. Rev., 40 [6] 239-65 (1996).
2. S. Suresh and A. Mortensen, "Functionally Graded Metals and Metal Ceramic Composites: Part II. Thermomechanical Behavior," Int. Mater. Res., in press.
3. B. H. Rabin and I. Shiota (Eds.), "Functionally Graded Materials," MRS Bull., [Jan.] 14-55 (1995).
4. M. Niini, T. Hirai, and R. Watanabe, "Functionally Gradient Materials for Aerospace Thermal Barrier Materials," J. Jpn. Soc. Compos. Mater., 13 [6] 257-64 (1987).
5. L. B. Freund, "The Stress Distribution and Curvature of a General Compositionally Graded Semiconductor Layer," J. Cryst. Growth, 123, 341-44 (1993).
6. S. Suresh, A. E. Giannakopoulos, and M. Olsson, "Elastoplastic Analysis of Thermal Cycling: Layered Materials with Sharp Interfaces," J. Mech. Phys. Solids, 42 [6] 979-1018 (1994).
7. A. E. Giannakopoulos, S. Suresh, M. Finot, and M. Olsson, "Elastoplastic Analysis of Thermal Cycling: Layered Materials with Compositional Gradients," Acta Metall. Mater., 43 [4] 1335-54 (1995).
8. M. Finot and S. Suresh, Multi-Therm, software for thermomechanical analysis of multilayered and graded materials, Version 1.4, copyright MIT, Cambridge, MA.
9. M. Finot and S. Suresh, "Small and Large Deformation of Thick and Thin-Film Multilayers: Effects of Layer Geometry, Plasticity, and Compositional Gradients," J. Mech. Phys. Solids, 44 [5] 683-721 (1996).
10. Y. L. Shen and S. Suresh, "Elastoplastic Deformation of Multilayered Materials during Thermal Cycling," J. Mater. Res., 10 [5] 1200-15 (1995).
11. R. L. Williamson, B. H. Rabin, and J. T. Drake, "Finite Element Analysis of Thermal Residual Stresses at Graded Ceramic Metal Interfaces. Part I. Model Description and Geometrical Effects," J. Appl. Phys., 74 [2] 1310-20 (1993).
12. J. T. Drake, R. L. Williamson, and B. H. Rabin, "Finite Element Analysis of Thermal Residual Stresses at Graded Ceramic Metal Interfaces. Part II. Interface Optimization for Residual Stress Reduction," J. Appl. Phys., 74 [2] 1321-26 (1993).
13. D. J. Green, R. H. J. Hannink, and M. V. Swain, Transformation Toughening of Ceramics. CRC Press, Boca Raton, FL, 1989.
14. N. Claussen, "Microstructural Design of Zirconia-Toughened Ceramics (ZTC)"; pp. 321-51 in Advances in Ceramics, Vol. 12, Science and Technology of Zirconia II. Edited by N. Claussen, M. Rühle, and A. H. Heuer. American Ceramic Society, Columbus, OH, 1984.
15. W. R. Cannon, "Transformation Toughened Ceramics for Structural Applications," Treatise Mater. Sci. Technol. 29, 195-228 (1989).
16. N. Claussen and M. Rühle, "Design of Transformation Toughened Ceramics"; pp. 137-63 in Advances in Ceramics, Vol. 3, Science and Technology of Zirconia. Edited by A. H. Heuer and L. W. Hobbs. American Ceramic Society, Columbus, OH, 1981.
17. A. G. Evans, "Toughening Mechanisms in Zirconia Alloys"; pp. 193-212 in Advances in Ceramics, Vol. 12, Science and Technology of Zirconia II. Edited by N. Claussen, M. Rühle, and A. H. Heuer. American Ceramic Society, Columbus, OH, 1984.
18. D. J. Green, F. F. Lange, and M. R. James, "Residual Surface Stresses"; pp. 240-50 in Advances in Ceramics, Vol. 12, Science and Technology of Zirconia II. Edited by N. Claussen, M. Rühle, and A. H. Heuer. American Ceramic Society, Columbus, OH, 1984.
19. D. J. Green, "A Technique for Introducing Compression into Zirconia Ceramics," J. Am. Ceram. Soc., 66, C-178 (1983).
20. A. V. Virkar, J. L. Huang, and R. A. Cutler, "Strengthening of Oxide Ceramics by Transformation-Induced Stresses," J. Am. Ceram. Soc., 70, 164-70 (1987).
21. R. A. Cutler, J. D. Bright, A. V. Virkar, and D. K. Shetty, "Strength Improvement in Transformation-Toughened Alumina by Selective Phase Transformation," J. Am. Ceram. Soc., 70, 714-18 (1987).
22. E. M. Sachs, M. J. Cima, P. Williams, D. Brancazio, and J. Cornie, "Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model," J. Eng. Ind., 114, 481-88 (1992).
23. M. J. Cima and E. M. Sachs, "Three-Dimensional Printing: Form, Materials, and Performance"; pp. 187-94 in Proceedings of the Solid Freeform Fabrication Symposium (Austin, TX, August 12-14, 1991). Edited by J. J. Beaman, H. L. Marcus, D. L. Bourell, J. W. Barlow, and T. Crawford. University of Texas, Austin, TX, 1991.
24. E. Sachs, M. J. Cima, J. Bredt, and A. Curodeau, "CAD-Casting: The Direct Fabrication of Ceramic Shells and Cores by Three-Dimensional Printing," Manuf. Rev., 5 [2] 117-26 (1992).
25. S. Michaels, E. M. Sachs, and M. J. Cima, "Metal Parts Generation by Three Dimensional Printing"; pp. 244-50 in Proceedings of the Solid Freeform Fabrication Symposium (Austin, TX, August 3-5, 1992). Edited by J. J. Beaman, H. L. Marcus, D. L. Burrell, and J. W. Barlow. University of Texas, Austin, TX, 1992.
26. B. M. Wu, S. W. Borland, R. A. Giordano, L. G. Cima, E. M. Sachs, and M. J. Cima, "Solid Free Form Fabrication of Drug Delivery Devices," J. Controlled Release, 40, 77-87 (1996).
27. J. Yoo, M. J. Cima, S. Khanuja, and E. Sachs, "Structural Ceramic Components by 3D Printing"; pp. 40-50 in Proceedings of the Solid Freeform Fabrication Symposium (Austin, TX, August 9-11, 1993). Edited by J. J. Beaman, H. L. Marcus, D. L. Bourell, J. W. Barlow, and T. Crawford. University of Texas, Austin, TX, 1993.
28. J. Yoo, M. Cima, E. Sachs, and S. Suresh, "Fabrication and Microstructural Control of Advanced Ceramic Components by Three-Dimensional Printing"; pp. 755-62 in Ceramic Engineering and Science Proceedings, Proceedings of the 19th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures (Cocoa Beach, FL, January, 1995). Edited by G. N. Pfendt. American Ceramic Society, Westerville, OH, 1995.
29. B. Giritlioglu, "The Effect of Print Style on Mechanical and Microstructural Properties of Structural Ceramics Fabricated via Three Dimensional Printing"; M.S. Thesis. Massachusetts Institute of Technology, Cambridge, MA, 1996.
30. S. P. Timoshenko and J. N. Goodier, Theory of Elasticity 3rd ed. McGraw-Hill, New York, 1960.
31. 2 System by X-ray Diffraction," J. Am. Ceram. Soc., 68, C-119-C121 (1984).
32. J. Yoo and M. Cima, "Solid Freeform Fabrication Methods for Building FGM with Three-Dimensional Compositional Gradients"; in Functionally Graded Materials. Edited by Y. Miyamoto and R. Ford. Chapman and Hall, London, U.K., in press.
33. M. Schwartz, Handbook of Structural Ceramics. McGraw-Hill, New York, 1992.
34. G. R. Anstis, P. Chantikul, B. R. Lawn, and D. B. Marshall, "A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements," J. Am. Ceram. Soc., 64, 533-38 (1981).
35. M. Cima, J. Yoo, S. Khanuja, M. Rynderson, D. Nammour, B. Giritlioglu, J. Grau, and E. Sachs, "Structural Ceramic Components by 3D Printing"; pp. 479-88 in Proceedings of the Solid Freeform Fabrication Symposium (Austin, TX, August 7-9, 1995). Edited by J. J. Beaman, H. L. Marcus, D. L. Bourell, J. W. Barlow and T. Crawford. University of Texas, Austin, TX, 1995.
36. D. B. Marshall, "Strength Characteristics of Transformation-Toughened Zirconia," J. Am Ceram. Soc., 69 [3] 173-80 (1986).
37. R. M. McMeeking, "Effective Transformation Strain in Binary Composites," J. Am. Ceram. Soc., 69, C-301-C-302 (1986).
38. D. J. Green, F. F. Lange, and M. R. James, "Factors Influencing Residual Stresses Due to a Stress-Induced Phase Transformation," J. Am. Ceram. Soc., 66, 623-29 (1983).