Self-lubrication mechanism of chlorine implanted TiN coatings

Wear

Volumn 254, Issue 7-8, 2003, Pages 668-679

  Akhadejdamrong, Thananan ^a   Aizawa, Tatsuhiko ^a   Yoshitake, Michiko ^b   Mitsuo, Atsushi ^c   Yamamoto, Takahisa ^d   Ikuhara, Yuichi ^d  

^a UNIVERSITY OF TOKYO   (Japan)

^b NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

^c TOKYO METROPOLITAN INDUSTRIAL TECHNOLOGY RESEARCH INSTITUTE   (Japan)

^d UNIVERSITY OF TOKYO   (Japan)

Author keywords

Chemical modification; Chlorine; Ion implantation; Self lubrication; Shear deformation

Indexed keywords

CHLORINE; COATINGS; FRICTION; ION IMPLANTATION; TITANIUM NITRIDE; WEAR OF MATERIALS;

FRICTION COEFFICIENT;

LUBRICATION;

CHLORINE; DEFORMATION; ION IMPLANTATION; METALLIC COATING; SELF-LUBRICATING MATERIAL; SHEAR STRESS; WEAR;

EID: 0038127175     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0043-1648(03)00249-7     Document Type: Article

References (44)

1. G.R. Fenske, Ion Implantation, ASM Handbook, Friction, Lubrication, and Wear Technology, vol. 18, ASM International, Materials Park, OH, 1992, 850-860.
2. Walter J.L.Skelly D.W.Minnear W.P.Ion implantation of cobolt-tungsten carbide tools for machining titanium Wear 170 1993 79-92
3. Kern K.T.Walter K.C.Griffin A.J.Jr.Lu Y.Nastasi M.Scarborough W.K.Tesmer J.R.Fayeulle, boron and nitrogen implantation of steels Nucl. Instrum. Methods Phys. Res. B 127-128 1997 972-976
4. Qiu X.Hamdi A.Elmoursi A.Malaczynski G.Development of bench test methods for the evaluation of ion-implanted materials: piston/bore application Surf. Coat. Technol. 88 1996 190-196
5. Lucas S.Chevallier J.Nanohardness and transmission electron microscopy study of nitrogen-implanted aluminum Surf. Coat. Technol. 65 1994 128-132
6. Bull S.J.Rice-Evans P.C.Saleh A.Perry A.J.Treglio J.R.Slow positron annihilation studies of defects in metal implanted TiN coatings Surf. Coat. Technol. 91 1997 7-12
7. Manory R.R.Li C.L.Fountzoulas C.Demaree J.D.Hirvonen J.K.Nowak R.Effect of nitrogen ion-implantation on the tribological properties and hardness of TiN films Mater. Sci. Eng. A 253 1998 319-327
8. Perry A.J.Microstructural changes in ion implanted titanium nitride Mater. Sci. Eng. A 253 1998 310-318
9. Sharkeev Y.P.Didenko A.N.Kozlov E.V.High dislocation density structures and hardening produced by high fluency pulsed-ion-beam implantation Surf. Coat. Technol. 654 1994 112-120
10. Perry A.J.Geist D.E.On the residual stress profile developed in titanium nitride by ion implantation Nucl. Instrum. Methods Phys. Res. B 127/128 1997 967-971
11. Sharkeev Y.P.Gritsenko B.P.Fortuna S.V.Perry A.J.Modification of metallic materials and hard coatings using metal ion implantation Vacuum 52 1999 247-254
12. Manory R.R.Perry A.J.Nowak R.Rafaja D.Some effects on ion beam treatments on TiN coatings of commercial quality Surf. Coat. Technol. 114 1999 137-142
13. Eun K.Y.Lee K.-R.Yoon E.-S.Kong H.Effect of polymetric debris on the tribological behavior of diamond-like carbon films Surf. Coat. Technol. 87 1996 569-574
14. 2/metal composite coatings used for dry machining and other industrial applications Surf. Coat. Technol. 123 2000 84-91
15. T. Akhadejdamrong, Self-protection/self-lubrication of ceramic coating by light element ion implantation, Ph.D. Thesis, University of Tokyo, 2002.
16. Mitsuo A.Kanda K.Aizawa T.Friction and wear properties of carbon-ion implanted titanium nitride films Surf. Coat. Technol. 128-129 2000 440-445
17. Akhadejdamrong T.Iwamoto C.Ikuhara Y.Mitsuo A.Aizawa T.Formation of protection layer during oxidation of Al-implanted TiN coating Mater. Trans. 436 2002 1291-1297
18. Mitsuo A.Aizawa T.Improvement of friction and wear performance of titanium nitride films by chlorine ion implantation Mater. Trans. JIM 4012 1999 1361-1366
19. T. Aizawa, A. Mitsuo, Improvement of tribological behavior in thin hard coatings by chlorine ion implantation, in: Proceedings of the 20th ASM Heat Treating Soc. Conference, St. Loius, 2000, pp. 366-372.
20. Aizawa T.Akhadejdamrong T.Iwamoto C.Ikuhara Y.Mitsuo A.Self-lubrication of chlorine-implanted titanium nitride coating J. Am. Ceram. Soc. 851 2002 21-24
21. A. Mitsuo, T. Akhadejdamrong, T. Aizawa, Self-lubrication coating and surface modification, in: Proceedings of the Powder Metallurgy World Congress, vol. 1, Orlando, 2002, pp. 23-36.
22. Mori S.Nanao H.Numata T.Tribo-chemistry. Fundamentals and applications of micro-tribology Materia 4010 2001 850-853
23. S. Kataoka, Lubrication in the low-speed metal forming, Ph.D. Thesis, University of Tokyo, 1995.
24. Sato Y.Hara M.Chlorine induced corrosion of Ni and Ni-Cr alloys at elevated temperature Jpn. J. High Temp. 285 2002 219-225
25. A. Mitsuo, T. Akhadejdamrong, T. Aizawa, Self-lubrication via halogen ion implantation to TiN coating, in: Proceedings of the 53rd Japan Joint Conference on Technol. Plast., Hamamatsu, November 2002, pp. 303-304.
26. T. Akhadejdaomrong, T. Aizawa, M. Yoshitake, A. Mitsuo, Feasibility study of self-lubrication by chlorine implantation, Nucl. Instrum. Methods Phys. Res. B, 2003, in press.
27. Mitsuo A.Aizawa T.Effect of chlorine distribution profiles of tribological properties for chlorine-implanted titanium nitride films Surf. Coat. Technol. 158-159 2002 694-698
28. L.J. Liu, et al., Improvements in tribo-mechanical properties of commercial TiN coatings by argon ion implantation, in: M.A. Nastasi, et al. (Eds.), Beam-solid interactions, Materials Research Society, Pittsburgh, 1993, pp. 469-474.
29. Lu F.H.Chen H.Y.XPS analyses of TiN films on Cu substrates after annealing in the controlled atmosphere Thin Solid Films 355-356 1999 374-379
30. Polyakova I.G.Hübert T.Thermal stability of TiN thin films investigated by DTG/DTA Surf. Coat. Technol. 14 2001 55-61
31. R.S. Cowan, W.O. Winer, Frictional Heating Calculations, ASM Handbook, Friction, Lubrication, and Wear Technology, vol. 18, ASM International, Materials Park, OH, 1992, 39-44.
32. Waldner P.Eriksson G.Thermodynamic modeling of the system titanium-oxygen Calphad 232 1999 189-218
33. 2(1 1 0) surface studied by noncontact AFM Appl. Surf. Sci. 157 2000 212-217
34. 2(1 1 0) Surf. Sci. 396 1998 52-60
35. 2(2 1 0) studied by atomically resolved STM and atomistic simulation Surf. Sci. 448 2000 131-141
36. 2-x). Part II. Experimental evidence Tribol. Trans. 222 1990 209-220
37. Woydt M.Skopp A.Dörfel I.Witke K.Wear engineering oxides/anti-wear oxides Wear 218 1998 84-95
38. Serratos M.Bronson A.The effect of oxygen partial pressure on the stability of Magnèli phases in high temperature corrosive wear Wear 198 1996 267-270
39. F.S. Galasso, illustrated by W. Darby, International Series of Monographs in Solid State Physics, Structure and Properties of Inorganic Solids, vol. 7, Pergamon, New York, 1970, p. 264.
40. 2 single sheet lubrication by molybdenum dithiocaramate Tribol. Int. 3112 1998 737-743
41. 2/metal composite coatings used for dry machining and other industrial applications Surf. Coat. Technol. 123 2000 84-91
42. Derflinger V.Brandle H.Zimmermann H.New hard/lubricant coating for dry machining Surf. Coat. Technol. 113 1999 286-292
43. Huu T.L.Paulmier D.Grabchenko A.Horvath M.Meszaros I.Mamalis A.G.Autolubrication of diamond coatings at high sliding speed Surf. Coat. Technol. 108-109 1998 431-436
44. Shiao S.J.Wang T.Z.Dry self-lubricating composites Composites 27B 1996 459-465