Cam-phasing optimization using Artificial Neural Networks as surrogate models-fuel consumption and NOx emissions

SAE Technical Papers

Volumn , Issue , 2006, Pages

  Wu, Bin ^a   Prucka, Robert G ^a   Filipi, Zoran S ^a   Kramer, Denise M ^b   Ohl, Gregory L ^b  

^a UNIVERSITY OF MICHIGAN   (United States)

^b CENTRO RICERCHE FIAT   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

CAMS; FUELS; NEURAL NETWORKS; NITROGEN OXIDES;

EXPONENTIAL INCREASE; HARDWARE EXPERIMENT; HIGH-FIDELITY SIMULATIONS; MULTI-DIMENSIONAL SPACE; OPTIMIZATION FRAMEWORK; OPTIMIZATION PROBLEMS; TRADITIONAL APPROACHES; VARIABLE VALVE TIMING;

ENGINE CYLINDERS;

EID: 85072429349     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2006-01-1512     Document Type: Conference Paper

References (51)

1. Ahmad, T., and Theobald, M.A., "A survey of variable-valve- actuation technology" SAE Technical Paper No. 891674, 1989.
2. Hannibal, W., Flierl, R., Stiegler L., and Meyer R., "Overview of Current Continuously Variable Valve Lift Systems for Four-Stoke Spark-Ignition Engines and the Criteria for Their Design Ratings" SAE Technical Paper No. 2004-01-1263, 2004.
3. Flierl, R., and Fluting, M., "The Third Generation of Valvetrains-New Fully Variable Valvetrains for Throttle-Free Load Control" SAE Technical Paper No. 2000-01-1227, 2000.
4. Nakamura, M., Hara, S., Yamada, Y., Takeda, K., Okamoto, N., and Hibi, T., "A Continuous Variable Valve Event and Lift Control Device (VEL) for Automotive Engines" SAE Technical Paper No. 2001-01-0244, 2001.
5. Nishizawa, K., Mitsuishi, S., Mori, K., and Yamamoto, s., "Development of Second Generation of Gasline P-ZEV Technology" SAE Technical Paper No. 2001-01-1310, 2001.
6. Hong, H., Parvate-Patil, G.B., and Gordon, B., "Review and Analysis of Variable Valve Timing Strategies-Eight Ways to Approach" Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. 218, No. 10, 2004, pp 1179-1200.
7. Gray, C., "A review of variable engine valve timing" SAE Technical Paper No. 880386, 1988.
8. Dresner, T., and Barkan P., "A review of variable valve timing benefits and modes of operation" SAE Technical Paper No. 891676, 1989.
9. Asmus, T.W., "Perspectives on applications of variable valve timing" SAE Technical Paper No. 910445, 1991.
10. Ma, T.H., "Effect of variable engine valve timing on fuel economy" SAE Technical Paper No. 880390, 1988.
11. Bohac, S., and Assanis, D., "Effects of Exhaust Valve Timing on Gasoline Engine Performance and Hydrocarbon Emissions" SAE Technical Paper No. 2004-01-3058, 2004.
12. Roepke, K., and Fischer, M., "Efficient Layout and Calibration of Variable Valve Trains" SAE Technical Paper 2001-01-0668, 2001.
13. Flint, S., and Causey P., "Use of Experimental Design and Two Stage Modeling in Calibration Generation for Variable Camshaft Timing Engines" Design of Experiments (DOE) in der Motorenentwicklung, Expert Verlag, ISBN 3-8169-2271-6, 2003, pp 57-77.
14. Morton, T., Connors, R., Maloney, P., and Sampson, D., "Model-Based Optimal Calibration of a Dual Independent Variable Valve-Timing Engine" Design of Experiments (DOE) in der Motorenentwicklung, Expert Verlag, ISBN 3-8169-2271-6, 2003, pp 77-85.
15. Rask, E., and Sellnau, M., "Simulation-Based Engine Calibration: Tools, Techniques, and Applications" SAE Technical Paper No. 2004-01-1264, 2004.
16. Fu, H., Chen, X., Mustafa, E., Trigui, N., Richardson, S., and Shilling. I., "Analytical Investigation of Cam Strategies for SI Engine Part-Load Operation" SAE Technical Paper No. 2004-01-0997, 2004.
17. Kramer, U., and Philips, P., "Phasing Strategy for an Engine with Twin Variable Cam Timing" SAE Technical Paper No. 2002-01-1101, 2002.
18. Wu, B., Prucka, R. G., Filipi, Z.S., Kramer, D.M., and Ohl, G.L., "Cam-Phasing Optimization Using Artificial Neural Networks as Surrogate Models-Maximizing Torque Output" SAE Technical Paper No. 2005-01-3757, SAE Transactions-Journal of Engines, 2005.
19. Mehrotra, K., Mohan, C. K., and Ranka S., Elements of Artificial Neural Networks, the MIT Press, Cambridge, Massachusetts, ISBN 0-262-13328-8, 1997.
20. He, Y., and Rutland, C. J., "Modeling of a Turbocharged DI Diesel Engine Using Artificial Neural Networks" SAE Technical Paper No. 2002-01-2772, 2002.
21. He, Y., and Rutland, C. J., "Application of Artificial Neural Networks in Engine Modeling" International Journal of Engine Research, Vol. 5, No. 4, 2004, pp. 281-296.
22. Brahma, I., and Rutland C. J., "Optimization of Diesel Engine Operating Parameters Using Neural Networks" SAE Technical Paper No. 2003-01-3228, 2003.
23. Grimaldi, C. N., and Mariani, F., "On-board Diagnosis of Internal Combustion Engines: a New Model Definition and Experimental Validation" SAE Technical Paper No. 970211, 1997.
24. Grimaldi, C. N., and Mariani, F., "OBD Engine Fault Detection Using a Neural Approach" SAE Technical Paper No. 2001-01-0559, 2001.
25. Krug, C., Liebl, J., Munk, F., Kammer, A., and Reuss, H.-C., "Physical Modelling and Use of Modern System Identification for Real-Time Simulation of Spark Ignition Engines in All Phases of Engine Development" SAE Technical Paper No. 2004-01-0421, 2004.
26. Winsel, T., Ayeb, M., Theuerkauf, H. J., Pischinger, S., Schernus, C., and Lutkemeyer, G., "HiL-Calibration of SI Engine Cold Start and Warm-up Using Neural Real-Time Model" SAE Technical Paper No. 2004-01-1362, 2004.
27. Ayeb, M., Lichtenthäler, D., Winsel, T., and Theuerkauf, H. J., "SI engine modeling using neural networks" SAE Technical Paper No. 980790, 1998.
28. Rishavy, E. A., Hamilton, S. C., Ayers, J. A., and Keane, M. A., "Engine Control Optimization for Best Fuel Economy with Emission Constraints" SAE Technical Paper 770075, 1977.
29. Auiler, J. E., Zbrozek, J. D., and Blumberg, P. N., "Optimization of Automotive Engine Calibration for Better Fuel Economy-Methods and Applications" SAE Technical Paper 770076, 1977.
30. Baker, R. E., and Daby, E. E., "Engine Mapping Methodology" SAE Technical Paper 770077, 1977.
31. Cassidy, J. F., "A Computerized On-Line Approach to Calculating Optimum Engine Calibrations" SAE Technical Paper 770078, 1977.
32. Voigt, K. U., "Model Based On-Line Optimization for Modern Engine Management Systems, SAE Technical Paper 931668, 1993.
33. Schmitz, G., Oligschlager, U., and Eifler, G., "Automated system for optimized calibration of engine management systems" SAE Technical Paper 940151, 1994.
34. Hochschwarzer, H., Kriegler, W., and Schon M., "Fully Automatic Determination and Optimization of Engine Control Characteristics" SAE Technical Paper 920255, 1992.
35. Kampelmuhler, F. T., Paulitsch, R., and Gschweitl, K., "Automatic ECU-Calibration-An Alternative to Conventional Methods" SAE Technical Paper 930395, 1993.
36. McKay, M.D., Beckman, R.J., and Conover, W.J., "A comparison of three methods for selecting values of input variables in the analysis of output from a computer code." Technometrics, Vol. 21, No. 2, May 1979, pp. 239-245. (Pubitemid 9452235)
37. Lunani, M., Sudjianto, A., and Johnson, P.L., "Generating efficient training samples for neural networks using Latin Hypercube sampling." Proceedings of the 1995 Artificial Neural Networks in Engineering (ANNIE'95), St. Louis, MO, USA, Nov. 12-15, 1995, pp. 209-214.
38. Wu, B., Filipi, Z., Kramer, D.M., Ohl, G.L., Prucka, M.J., and DiValentin, E., "Using Neural Networks to Compensate Altitude Effects on the Air Flow Rate in Variable Valve Timing Engines." SAE Technical Paper No. 2005-01-0066, SAE Transactions-Journal of Engines, 2005.
39. Bozza, F., Gimelli, A., and Tuccillo, R., "The Control of a VVA-Equipped SI Engine Operation by Means of 1D Simulation and Mathematical Optimization" SAE Technical Paper No. 2002-01-1107, 2002.
40. Bozza, F., Gimelli, A., Senatore, A., and Caraceni, A., "A theoretical comparison of various VVA systems for performance and emission improvement of SI-engines" SAE Technical Paper No. 2001-01-0670, 2001.
41. Sellnau, M., and Rask, E., "Two-Step Variable Valve Actuation for Fuel Economy, Emissions, and Performance" SAE Technical Paper No. 2004-01-1264, 2004.
42. WAVE V5 Engine Reference Manual, Ricardo Software, Ricardo, Inc., November, 2002.
43. WAVE V5 Basic Reference Manual, Ricardo Software, Ricardo, Inc., November, 2002.
44. Tabaczynski, R.J., Trinker, F.H., and Shannon, B.A., "Further refinement and validation of a turbulent flame propagation model for spark-ignition engines" Combustion and Flame, Vol. 39, No. 2, 1980, pp. 111-121.
45. Poulos, S.G., and Heywood, J.B., "The effect of chamber geometry on spark-ignition engine combustion" SAE Technical Paper No. 830334, 1983.
46. Filipi, Z., and Assanis, D.N., "Quasi-dimensional computer simulation of the turbocharged spark-ignition engine and its use for 2- and 4-valve engine matching studies" SAE Technical Paper No. 910075, SAE Transactions, Vol. 100, Sec. 3, 1991.
47. Filipi, Z., "Investigation of Variable Valve Area Strategies for a Turbocharged SI-Engine" Proceedings of the IMechE 1994-6, 5th International Conference on Turbocharging and Turbochargers, London, 1994, pp. 93-102.
48. Filipi, Z.S., and Assanis, D.N., "The Effect of Stroke-to-Bore Ratio on Combustion, Heat Transfer and Performance of a Homogeneous-Charge Spark-Ignited Engine of Given Displacement" International Journal of Engine Research, Volume 1, No. 2, JER0500, London, 2000, pp. 191-208.
49. Engineous Software, www.engineous.com
50. Wu, B., Filipi, Z. S., Assanis, D. A., Kramer, D.M., Ohl, G.L., Prucka, M.J., and DiValentin, E., "Using artificial neural networks for representing the air flow rate through a 2.4 liter VVT engine." SAE Technical Paper No. 2004-01-3054, SAE Transactions-Journal of Engines, 2004.
51. Demuth, H., and Beale, M., Neural Network Toolbox User's Guide (Version 4), Mathworks Inc., 2002.