Technologies and approaches to reducing the fuel consumption of medium- and heavy-duty vehicles

Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles

Volumn , Issue , 2010, Pages 1-250

[No Author Info available]

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMOBILES; DIESEL ENGINES; FUELS; GARBAGE TRUCKS; TRACTORS (TRUCK); TRANSPORTATION; TRUCK TRAILERS; VEHICLES;

CONSUMPTION STANDARDS; FEDERAL AGENCY; HEAVY DUTY VEHICLES; SPECIFIC FUEL CONSUMPTION; TRACTOR TRAILER; TRANSPORTATION FUELS; VARIOUS TECHNOLOGIES; VEHICLE TYPES;

FUEL ECONOMY;

EID: 85032846936     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.17226/12845     Document Type: Book

References (272)

1. DOE, EIA. 2009. Annual Energy Outlook 2010 (Preliminary). Washington, D.C., December.
2. TIAX, LLC. 2009. Assessment of Fuel Economy Technologies for Mediumand Heavy-Duty Vehicles. Final Report. Report to the National Academy of Sciences. Cambridge, Mass. September.
3. TRB (Transportation Research Board). 2002. Special Report 267: Regulation of Weights, Lengths, and Widths of Commercial Motor Vehicles. Washington, D.C.: TRB.
4. DOC (U.S. Department of Commerce), Census Bureau. 2005. 2002 Economic Census, Industry Product Analysis. Washington, D.C. March.
5. DOE, EIA (U.S. Department of Energy, Energy Information Administration). 2009a. Annual Energy Review 2008. Report No. DOE/EIA-0384(2008). Washington, D.C.
6. DOE, EIA. 2009b. Annual Energy Outlook 2009. Report No. DOE/EIADOE/EIA-0383(2009). Washington, D.C. March.
7. DOE, EIA. 2009c. Annual Energy Outlook 2010 (Preliminary). Washington, D.C. December.
8. Davis, S., S. Diegel, and R.G. Boundy. 2009. Transportation Energy Data Book, Edition 28, Table 5.7. Knoxville, Tenn.: U.S. Department of Energy, Energy Efficiency and Renewable Energy. Report No. ORNL-6984.
9. Federal Highway Administration, Highway Statistics Summary to 1995, Table VM-201A, and Highway Statistics (annual releases), Table VM-1. Washington D.C.
10. ICCT (Northeast States Center for a Clean Air Future/International Council on Clean Transportation). 2009. Setting the Stage for Regulation of Heavy-Duty Vehicle Fuel Economy and GHG Emissions: Issues and Opportunities. February.
11. NRC (National Research Council). 2008. Review of the 21st Century Truck Partnership. Washington, D.C.: The National Academies Press.
12. ANL (Argonne National Laboratory). 2009. Evaluation of Fuel Consumption Potential of Medium and Heavy Duty Vehicles Through Modeling and Simulation.
13. ATA (American Trucking Associations, Inc.). 2007a. Top 100 private carriers 2007. Transport Topics. Available at http://www.ttnews.com/tt100. archive.
14. ATA. 2007b. Top 100 for-hire fleets 2007. Transport Topics. Available at http://www.ttnews.com/tt100.archive.
15. ATA. 2009. Top 100 commercial fleets 2009. Light and Medium Truck. July. Available at http://www.lmtruck.com/lmt100/index.asp.
16. Bradley, M.J., and Associates LLC. 2009. Setting the Stage for Regulation of Heavy-Duty Vehicle Fuel Economy and GHG Emissions: Issues and Opportunities. Washington, D.C.: International Council on Clean Transportation. February.
17. Chapin, C.E. 1981. Road load measurement and dynamometer simulation using coastdown techniques. SAE Paper 810828. Warrendale, Pa.: SAE International.
18. Clark, N.N., M. Gautam, W.S. Wayne, R.D. Nine, G.J. Thompson, D.W. Lyons, H. Maldonado, M. Carlock, and A. Agrawal. 2003. Creation and evaluation of a medium heavy-duty truck test cycle. SAE Transactions:Journal of Fuels & Lubricants, Vol. 112, Part 4, pp. 2654-2667.
19. Clark, N.N., M. Gautam, W. Riddle, R.D. Nine, and W.S. Wayne. 2004. Examination of a heavy-duty diesel truck chassis dynamometer schedule. SAE Paper 2004-01-2904. SAE Powertrain Conference, Tampa, Fla., Oct.
20. Clark, N.N., M. Gautam, W.S. Wayne, D.W. Lyons, and G.J. Thompson. 2007. Heavy-duty vehicle chassis dynamometer testing for emissions inventory, air quality modeling, source apportionment and air toxics emissions inventory. Coordinating Research Council, Inc. Report No. E-55/59, Available at http://www.crcao.com/reports/recentstudies2007/E-55-59/E-55_59_Final_Report_23AUG2007.pdf. Accessed July 8, 2009.
21. CRC (Coordinating Research Council), March 2002. Qualification of the Heavy Heavy-Duty Diesel Truck Schedule and Development of Test Procedures. Final Report, CRC Project E-55-2.
22. Davies, C., J. Findsen, and L. Pedraza 2005. Assessment of the Greenhouse Gas Emission Benefits of Heavy Duty Natural Gas Vehicles in the United States. Final Report, September 22. Prepared for the U.S. Department of Transportation, Center for Climate Change and Environmental Forecasting, Washington, D.C.
23. Davis, S., and S. Diegel. 2007. Transportation Energy Data Book Edition 26. Oak Ridge, Tenn.: Oak Ridge National Laboratory.
24. DOE/EERE (U.S. Department of Energy/Office of Energy Efficiency and Renewable Energy). 2009. 2008 Vehicle Technologies Market Report.
25. Golden, Colo.: National Renewable Energy Laboratory. July. Available at http://www.nrel.gov/docs/fy09osti/46018.pdf.
26. EPA (U.S. Environmental Protection Agency). 2004. The MOVES Approach to Model Emission Model. Presentation to the Coordinating Research Council's 14th On-Road Vehicle Emission Workshop, San Diego, Calif., March 29-31. Available at http://www.epa.gov/otaq/ models/ngm/may04/crc0304a.pdf.
27. EPA (U.S. Environmental Protection Agency). 2009. SmartWay Truck Emissions Test Protocol Workshop. Drive Cycle Development. Available at http://www.epa.gov/SmartWayshipper/transport/documents/ tech/drive-cycle-development.pdf. Accessed September 22, 2009.
28. Frey, C., and J. Zheng. 2002. Probabilistic analysis of driving cycle-based highway vehicle emission factors. Environmental Science and Technology, Vol. 35 (23), October 30, pp. 5184-5191.
29. Gautam, M., N.N. Clark, W. Riddle, R. Nine, W.S. Wayne, H. Maldonado, A. Agrawal, and M. Carlock. 2002. Development and initial use of a heavy duty diesel truck test schedule for emissions characterization. SAE Transactions: Journal of Fuels & Lubricants, Vol. 111, pp. 812-825.
30. Gaylard, A.P. 2009. The appropriate use of CF in the automotive design process. SAE Paper 2009-01-1162. Presented at the SAE World Congress and Exhibition, Detroit, Mich. April.
31. Gaylard, Adrian Philip. The appropriate use of CFD in the Automotive Design Process, SAE 2009-01-1162. April 2009.
32. Graboski, M.S., R.L. McCormick, J. Yanowitz, and L. Ryan. 1998. Heavyduty diesel vehicle testing for the northern front range air quality study. Fort Collins, Colo.: February.
33. Larrick, R.P., and J.B. Soll. 2008. The MPG illusion. Science, Vol. 320, June 20. Metro Magazine. 2009. 2009 Fact Book.
34. Nam, E. 2009. Drive cycle development and real-world data in the United States: Why drive cycles are important. Presentation by the U.S. Environmental Protection Agency at WLTP meeting Geneva, January 15.
35. Nine, R.D., N.N. Clark, and P. Norton. 2000. Effect of emissions on multiple driving test schedules performed on two heavy duty vehicles. SAE Paper 2000-01-2818. Fall Fuels and Lubricants Meeting and Exposition, Baltimore, Md. October.
36. SAE (Society of Automotive Engineers) Standards, Procedures, and Recommended Practices. Warrendale, Pa.: SAE International.Various years:SAE J1082. Fuel Economy Measurement Road Test Procedure. February 2008.
37. SAE 1252. SAE Wind Tunnel Text Procedure for Trucks and Buses. Warrendale, Penn.: SAE International. July 1981; update in progress.
38. SAE J1263. Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques. January 2009.
39. SAE J1264. Joint Rccc/SAE Fuel Consumption Test Procedure (Short Term In-Service Vehicle), Type I. October 1986; update in progress.
40. SAE J1321. Joint Tmc/SAE Fuel Consumption Test Procedure-Type II. October 1986; update in progress SAE J1376. Fuel Economy Measurement Test (Engineering Type) for Trucks and Busses. July 1982.
41. SAE J1711. Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles. March 1999; update in progress.
42. SAE J2263. Road Load Measurement Using Onboard Anemometry and Coastdown Techniques. December 2008.
43. SAE J2264. Chassis Dynamometer Simulation of Road Load Using Coastdown Techniques. April 1995; update in progress.
44. SAE J2452. Stepwise Coastdown Methodology for Measuring Tire Rolling Resistance. June 1999; update in progress.
45. SAE J2711 Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles. September 2002.
46. Thompson, G.J., N.N. Clark, R.J. Atkinson, Z. Luzader, F.L. Vanscoy, V. Baker, and J. Chandler. 2004 Development of an interface method for implementing road grade in chassis dynamometer testing. American Society of Mechanical Engineers (ASME) Paper ICEF2004-896. Internal Combustion Engine Division 2004, ASME Fall Technical Conference, October 24-27, Long Beach, Calif.
47. TMA (Truck Manufacturers Association). 2007. Test, Evaluation, and Demonstration of Practical Devices/Systems to Reduce Aerodynamic Drag of Tractor/Semitrailer Combination Unit Trucks. Contract Number DE-FC26-04NT42117. National Energy Technology Laboratory, Morgantown, W.Va. April.
48. Walkowicz, K. 2006. Testing and evaluation of the GM/Allison Hybrid System in the King County Metro Transit Fleet. Presentation to the APTA Bus and Paratransit Conference, Seattle, Wash., May.
49. Wang, W., M. Gautam, X. Sun, R. Bata, N.N. Clark, G.M. Palmer, and D.W. Lyons. 1994. Emission comparisons of twenty-six heavy duty vehicles operated on conventional and alternative fuels. SAE Transactions, J. Commercial Vehicles, Vol. 102, Section 2, pp. 31-40.
50. Wang, W., D.W. Lyons, R. Bata, N.N. Clark, and M. Gautam. 1995. Inuse emissions tests of alternatively fueled heavy-duty vehicles with a transportable chassis dynamometer. Proc. Inst. Mech. Eng., Part D., J. Automobile Engineering, Vol. 209.
51. Wayne, W.S., N.N. Clark, A.B.M.S. Khan, M. Gautam, G.J. Thompson, and D.W. Lyons. 2008. Regulated and non-regulated emissions and fuel economy from conventional diesel, hybrid-electric diesel and natural gas transit buses. Journal of the Transportation Research Forum, Vol. 47, No. 3, October, pp. 105-126.
52. CRC (Coordinating Research Council). 1973. Heavy-Duty Vehicle Driving Pattern and Use Survey. Columbia, S.C.: Wilbur Smith and Associates. May.
53. CRC. 1974. Heavy-Duty Vehicle Driving Pattern and Use Survey:Part II-Los Angeles Basin. Columbia, S.C.: Wilbur Smith and Associates. February.
54. CRC. 1977. Truck Driving Pattern and Use Survey-Phase II. Columbia, S.C.: Wilbur Smith and Associates. June.
55. EPA (U.S. Environmental Protection Agency). 2006a. Fuel Economy Labeling of Motor Vehicles: Revisions to Improve Calculation of Fuel Economy Estimates, Final technical support document. 40 CFR Parts 86 and 600 [EPA-HQ-OAR-2005-0169; FRL-8257-5]. Federal Register: Dec. 27, 2006 (Vol. 71, No. 248): Rules and Regulations:Pp. 77871-77969.
56. EPA. 2006b. Regulatory Announcement: EPA Issues New Test Methods for Fuel Economy Window Stickers. EPA fact sheet, document number EPA420-F-06-069. Available at http://www.epa.gov/fueleconomy/ 420f06069.htm.
57. Greene, D., and J. DeCicco. 2000. Engineering and economic analyses of automotive fuel economy potential in the United States. Annual Review of Energy and the Environment. Vol. 25, pp. 477-535. November.
58. Merrion, D. 2002. Heavy Duty Diesel Emissions, Fifty Years, 1960-2010. Proceedings of the 2002 Fall Technical Conference of the ASME Internal Combustion Engine Division, New Orleans, La., Sept. 8-11. New York: American Society of Mechanical Engineers.
59. Morita, K., K. Shimamura, S. Yamaguchi, K. Furumachi, N. Osaki, S. Nakamura, K. Narusawa, K-J. Myong, and T. Kawai. 2008. Development of a fuel economy and exhaust emissions test method with HILS for heavy-duty HEVs. SAE Paper 2008-01-1318. Also in SAE International Journal of Engines.
60. NHTSA (National Highway Traffic Safety Administration, U.S. Department of Transportation). 1990. Laboratory Test Procedure for Federal Motor Vehicle Safety Standards and Regulations No. 121D, Air Brake Systems-Dynamometer, TP-121D-01. May. Available at http://www. nhtsa.dot.gov/cars/rules/import/fmvss/index.html#SN121.
61. NHTSA. 2004. Laboratory Test Procedure for FMVSS, No. 121, Air Brake Systems, TP-121V-05. March 12.
62. Sato, S. 2007. Fuel Economy Test Procedure for Heavy Duty Vehicles, Japanese Test Procedures, Presented at the IEA/International Transport Forum Workshop on Standards and Other Policy Instruments on Fuel Efficiency for HDVs, Paris France, June 21-22.
63. Alamgir, M., and A.M. Sastry. 2008. Efficient batteries for transportation applications. Paper No. 08CNVG-0036. Presented at SAE International, Convergence Transportation Electronics Conference 2008, Detroit, Mich. Available at http://amsl.engin.umich.edu/publications/08SAE_Alamgir_Sastry.pdf.
64. Allison Transmission. 2008. Superior Fuel Efficiency. Allison Transmission Brochure SA5704EN. Indianapolis, Ind.
65. Allison Transmission. 2009. Allison fuel efficiency improvements. Power-Point presentation provided to the committee by Allison Transmission. July.
66. Allison Transmission. 2009. Field Test Data on Class 8 Distribution Tractors. Excel spreadsheet summary provided to the committee by Allison Transmission. July.
67. Altoona Bus Research and Testing Center, Online Bus Database. Available at http://www.altoonabustest.com/.
68. Anderson, S.R., D.M. Lamberson, T.J. Blohm, and W. Turner. 2005. Hybrid route vehicle fuel economy. Advanced Hybrid Vehicle Powertrains 2005. SAE Paper 2005-01-1164. Warrendale, Pa.: SAE International.
69. Andrew, M. 2006. Lithium-ion: Enabling a spectrum of alternate fuel vehicles. Presentation by Johnson Controls-Saft to the Zero-Emission Vehicles (ZEV) Technology Symposium, Sacramento, Calif., Sept. 25-27.
70. ANL (Argonne National Laboratory). 2008. EnerDel/Argonne Advanced High-Power Battery for Hybrid Electric Vehicles. August. Available at http://www.transportation.anl.gov/batteries/enerdel.html.
71. ANL. 2009. Evaluation of Fuel Consumption Potential of Medium and Heavy Duty Vehicles Through Modeling and Simulation.
72. Baseley, S.J., C. Ehret, E. Greif, and M. Kliffken. 2007. Hydraulic hybrid systems for commercial vehicles. SAE Paper 2007-01-4150. Warrendale, Pa.: SAE International.
73. Chu, L., W. Wang, and Q. Wang. 2003 Energy management strategy and parametric design for hybrid electric military vehicle. SAE Paper 2003-01-0086. Warrendale, Pa.: SAE International.
74. Coryell, R. 2008. PACCAR-Eaton Hybrid Collaboration: Taking HD Hybrid from Concept to Commercialization. Presented at the NESCCAF/ICCT Workshop on Improving the Fuel Economy of Heavy-Duty Fleets II, San Diego, Calif. Feb. 20.
75. Delprat, S., T.M. Guerra, and J.Rimaux. 2001. Optimal Control of a Parallel Powertrain. Presented at the International Electric Vehicle Symposium (EVS18), Berlin. October.
76. DOE, EERE. 2009. 2008 Vehicle Technologies Market Report. Golden, Colo.: National Renewable Energy Laboratory. July. Available at http:// www.nrel.gov/docs/fy09osti/46018.pdf.
77. Eaton EPRI press release. Available at http://www.reuters.com/article/ pressRelease/idUS195396+19-Mar-2009+BW20090319.
78. Eaton-HTUF (Hybrid Truck User's Forum) Conference. 2009. Eaton hybrid hydraulic technology & development. Slide 3. Atlanta. October 27-29.
79. Eaton. 2009. Series Hybrid Hydraulic. Available at http://www.eaton. com/EatonCom/ProductsServices/Hybrid/SystemsOverview/Series Hydraulic/index.htm.
80. EPA (U.S. Environmental Protection Agency). 2004. Hydraulic Hybrid Technology-A Proven Approach. EPA brochure 420-F-04-024. March. Available at http://www.epa.gov/oms/technology/420f04024.pdf.
81. EPA. 2009. Region 9: Air Programs. Hydraulic Hybrid Vehicles. Available at http://www.epa.gov/region09/air/hydraulic-hybrid/.
82. EPRI (Electric Power Research Institute). 2008. Plug-In Hybrid Trouble Truck: An EPRI/Utility Alliance with Eaton Corporation and Ford Motor Company. Palo Alto, Calif.: EPRI. Available at http://mydocs.epri. com/docs/public/000000000001016496.pdf.
83. FTA (Federal Transit Administration). 2005. Analysis of Electric Drive Technologies for Transit Applications: Battery-Electric, Hybrid-Electric, and Fuel Cells. U.S. Department of Transportation, Report FTA-MA-26-7100-05.1. August. Available at http://www.navc.org/Electric_Drive_Bus_Analysis.pdf.
84. Freightliner vehicle specification information provided by the Columbia Truck Center, a Freightliner dealership in Columbia, S.C., July 2009. Freightliner Business Class Data Book PRL-72E.013.
85. GM BMW DaimlerChrysler. 2006. Hybrid Kooperation. Internationales Wiener Motorensymposium.
86. Gotting, G. 2007. Hydraulic Launch Assist HLA System. Eaton. Presented to the Houston Advanced Research Center.
87. Hanson, R., R. Reitz, D. Splitter, and S. Kokjohn. 2010. An experimental investigation of fuel reactivity controlled PCCI combustion in a heavy-duty engine. SAE Paper 2009-01-0864. Warrendale, Pa.: SAE International.
88. ICCT (International Council on Clean Transportation). 2008. Japan's "Top Runner" Fuel Economy Standards for Heavy-Duty Vehicles. Washington, D.C.: ICCT. February 11.
89. Kalhammer, F., B. Kopf, D. Swan, V. Roan, and M. Walsh. 2007. Status and Prospects for Zero Emissions Vehicle Technology. Report of the ARB Independent Expert Panel 2007. Prepared for the State of California Air Resources Board (ARB), Sacramento, Calif. April 13.
90. Karbowski, D. 2007. Plug-in Vehicle Control Strategy: From Global Optimization to Real Time Application. Presented at the International Electric Vehicle Symposium, EVS23, Anaheim, Calif. December 2-5.
91. Karbowski, K., F. von Pechmann, S. Pagerit, J. Kwon, and A. Rousseau. 2009. Fair comparison of powertrain configurations for plug-in hybrid operation using global optimization. SAE Paper 2009-01-1383. Presented at the SAE World Congress, Detroit, April.
92. Kepner, R.P. 2002. Hydraulic power assist-A demonstration of hydraulic hybrid vehicle regenerative braking in a road vehicle application. SAE Paper 2002-01-3128. Warrendale, Pa.: SAE International.
93. Kim, Y.J., and Z.S. Filipi. 2007. Simulation study of a series hydraulic hybrid propulsion system for a light truck. SAE Paper 2007-01-4151. Warrendale, Pa.: SAE International.
94. Kruiswyk, R. 2008. Annual Progress Report 2008 Vehicle Program:Advanced Combustion Engine Technologies. Prepared for the U.S. Department of Energy by Caterpillar. Washington, D.C.: U.S. Department of Energy.
95. Lin, C.-C., H. Peng, J.W. Grizzle, and J.-M. Kang. 2003. Power management strategy for a parallel hybrid electric truck. IEEE Transactions on Control Systems Technology, 11(6): 839-849.
96. Lin, C., et al. 2003. Control system development for an advanced-technology medium-duty hybrid electric truck. SAE Paper 2003-01-3369. Warrendale, Pa.: SAE International.
97. Liu, J., and H. Peng. 2008. Modeling and control of power-split vehicle, IEEE Transactions on Control Systems Technology, 16(6): 1242-1251.
98. Malikopoulos, A.A. 2009. Convergence properties of a computational learning model for unknown Markov chains. Journal of Dynamic Systems, Measurement and Control, 131(4).
99. NESCCAF/ICCT, Southwest Research Institute, and TIAX. 2009. Reducing Heavy-Duty Long Haul Combination Truck Fuel Consumption and CO2 Emissions. ICCT. October.
100. NHTSA (National Highway Traffic Safety Administration) 2009. Average Fuel Economy Standards Passenger Cars and Light Trucks Model Year 2011. Docket No. NHTSA-2009-0062. Washington, D.C.: U.S. Department of Transportation. March.
101. NRC (National Research Council). 1992. Automotive Fuel Economy: How Far Should We Go? Washington D.C.: National Academy Press.
102. NRC. 2008. Review of the 21st Century Truck Partnership. Washington, D.C.: The National Academies Press.
103. NRC. 2010. Transitions to Alternative Transportation Technologies: Plug-in Hybrid Electric Vehicles. Washington, D.C.: The National Academies Press.
104. NREL (National Renewable Energy Laboratory). 2004. Milestone Report 20040901. Golden, Colo.: NREL.
105. Ogawa, T., H. Yoshihara, S. Wakao, K. Kondo, and M. Kondo. 2008. Design estimation of the hybrid power source railway vehicle based on the multiobjective optimization by the dynamic programming. IEEE Transactions on Electrical and Electronic Engineering, 3(1): 48-55.
106. Patton, K.J., A.M. Sullivan, R.B. Rask, and M.A. Theobald. 2002. General Motors Corporation aggregating technologies for reduced fuel consumption:A review of the technical content in the 2002 National Research Council report on CAFE. SAE Paper 2002-01-0628. Warrendale, Pa.:SAE International.
107. Perez, L.V., G.R. Bossio, D. Moitre, and G.O. Garcia. 2006. Optimization of power management in an hybrid electric vehicle using dynamic programming. Mathematics and Computers in Simulation, Vol. 73, Special Issue, pp. 244-254.
108. Pesaran, A., T. Markel, M. Zolot, and S. Sprik. 2005. Ultracapacitors and Batteries in Hybrid Vehicles. Presented at Advanced Capacitors, San Diego, Calif. July 11-13. National Renewable Energy Laboratory document NREL/PR-540-40630. Available at http://www.nrel. gov/vehiclesandfuels/energystorage/pdfs/38484.pdf.
109. Pisu, P., and G. Rizzoni. 2007. A comparative study of supervisory control strategies for hybrid electric vehicles, IEEE Transactions on Control Systems Technology,15(3): 506-518.
110. Rodatz, P., G. Paganelli, A. Sciarretta, and L.Guzzella. 2005. Optimal power management of an experimental fuel cell/supercapacitor-powered hybrid vehicle. Control Engineering Practice, 13(1): 41-53.
111. SAE (Society of Automotive Engineers). 2004. Analysis of the performance and emissions of different bus technologies on the city of San Francisco Routes. SAE Paper 2004-01-2605. Warrendale, Pa.: SAE International.
112. Sciarretta, A., M. Back, and L. Guzzella. 2004. Optimal control of parallel hybrid electric vehicles. IEEE Transactions on Control Systems Technology, 12(3): 352-363.
113. Scordia, J., M. Desbois-Renaudin, R. Trigui, B. Jeanneret, F. Badin, and C. Plasse. 2005. Global optimisation of energy management laws in hybrid vehicles using dynamic programming. International Journal of Vehicle Design, 39(4): 349-367.
114. Snyder, K.A., X.G. Yang, and T.J. Miller. 2009 Hybrid vehicle battery technology-The transition from NiMH to Li-Ion. SAE Paper 2009-01-1385. Warrendale, Pa.: SAE International.
115. Stein, R., C. House, and T. Leone. 2009. Optimal use of E85 in a turbocharged direct injection engine. SAE Paper 2009-01-01490. Warrendale, Pa.: SAE International.
116. Tavares, Fernando, Rajit Johri, and Zoran Filipi. 2009. Simulation study of advanced variable displacement engine coupled to power-split hydraulic hybrid powertrain. ICES2009-76113. Proceedings of the ASME Internal Combustion Engine Division 2009 Spring Technical Conference ICES2009 May 3-6, Milwaukee, Wisc.
117. TIAX. 2009. Assessment of Fuel Economy Technologies for Medium- and Heavy-Duty Vehicles. Report prepared for the National Academy of Sciences by TIAX LLC, Cupertino, Calif. July 31.
118. Vuk, C. 2006. Electric Turbo Compounding. A Technology Whose Time Has Come. Presented at the Diesel Engine-Efficiency and Emissions Research (DEER) Conference, August 20-24, Detroit, Mich.
119. Vyas, A, C. Saricks, and F. Stodolsky. 2002. The Potential Effect of Future Energy-Efficiency and Emissions-Improving Technologies on Fuel Consumption of Heavy Trucks. Argonne National Laboratory (ANL) Report ANL/ESD/02-4. Argonne, Ill.: ANL.
120. Wu, B., C.-C. Lin, Z. Filipi, H. Peng, and D. Assanis. 2004. Optimal Power Management for a Hydraulic Hybrid Delivery Truck. Available at http:// www-personal.umich.edu/~hpeng/VSD_from_AVEC_HHV.pdf.
121. Wu, Y.-Y., B.-C. Chen, and K.D. Huang. 2008. The effects of control strategy and driving pattern on the fuel economy and exhaust emissions of a hybrid electric bus. SAE Paper 2008-01-0306. Warrendale, Pa.: SAE International.
122. Zhao et al. (eds.) 2003. Homogeneous Charge Compression Ignition (HCCI) Engines: Key Research and Development Issues. Warrendale, Pa.: SAE International.
123. Al-Qadi, I. 2007a. New generation of wide-base tire and its impact on trucking operations, environment, and pavements. Transportation Research Board 86th Annual Meeting, Paper No. 07-2432, January 21-25, Washington, D.C.
124. Al-Qadi, I. 2007b. Impact of wide-based tires on pavement and trucking operation. Presented at the International Workshop on the Use of Wide-Base Tires, Federal Highway Administration, Turner-Fairbank Highway Research Center, October 25-26, McLean, Virginia.
125. Bachman, L., A. Erb, and C. Bynum. 2005. Effect of single wide tires and trailer aerodynamics on fuel economy and NOx emissions of Class 8 line-haul tractor-trailers. SAE Paper 2005-01-3551. Warrendale, Pa.:SAE International.
126. Bachman, L., A. Erb, B. Anthony, C. Bynum, B. Shoffner, H. De La Fuente, and C. Ensfield. 2006. Fuel economy improvements and NOx reduction by reduction of parasitic losses: Effect of engine design. SAE Paper 2006-01-3474. Warrendale, Pa.: SAE International.
127. Baker, H., R. Cornwell, E. Koehler, and J. Patterson. 2009. Review of Low Carbon Technologies for Heavy Goods Vehicles. Prepared by Ricardo for the U.S. Department of Transportation. RD.09/18261.6. June.
128. Bennett, S. 2008. Smart routing to save fuel. Light & Medium Truck Magazine. August.
129. Bonnet, C., and H. Fritz. 2000. Fuel consumption reduction in a platoon: Experimental results with two electronically coupled trucks at close spacing. SAE Paper 2000-01-3056. Warrendale, Pa.: SAE International.
130. Bradley, C., and S. Nelson. 2009. Truck Tires and Rolling Resistance:Modeling and Impact on Fuel Consumption. Presentation by Michelin Tire North America to the committee, February 4.
131. Bradley, M.J., and Associates LLC. 2009. Setting the Stage for Regulation of Heavy-Duty Vehicle Fuel Economy and GHG Emissions: Issues and Opportunities. Washington, D.C.: International Council on Clean Transportation. February.
132. Browand, F., J. McArthur, and C. Radovich. 2004. Fuel Savings Achieved in the Field Test of Two Tandem Trucks. California PATH Research Report UCB-ITS-PRR-2004-20.
133. Capps, G., O. Franzese, B. Knee, M.B. Lascurain, and P. Otaduy. 2008. Class-8 Heavy Truck Duty Cycle Project Final Report. Report No. ORNL/TM-2008/122. Oak Ridge, Tenn.: Oak Ridge National Laboratory. December.
134. CARB (California Air Resources Board). 2008. Final Regulation Order to Reduce Greenhouse Gas Emissions from Heavy-Duty Vehicles. Available at http://www.arb.ca.gov/regact/2008/ghghdv08/ghgfro.pdf.
135. Caterpillar. 2006. Understanding Tractor-Trailer Performance. Brochure. Available at http://ohe.cat.com/cda/files/867819/7/LEGT6380.pdf. Peoria, Ill.: Caterpillar.
136. CIA (Central Intelligence Agency). 2007. CIA World Fact Book.
137. Cooper, K. 2004. Commercial vehicle aerodynamic drag reduction: Historical perspective as a guide. Pp. 9-28 in The Aerodynamics of Heavy Vehicles: Trucks, Buses, and Trains (R. McCallen, F. Browand, and J. Ross, eds). New York: Springer.
138. DOE (U.S. Department of Energy). 2006. 21st Century Truck Partnership Roadmap and Technical White Papers. Doc. No. 21CTP-003. Washington, D.C.: DOE. December.
139. DOE. 2008. Areas of Loss in Typical On-Highway Vehicles, and/or Review. Washington, D.C.: DOE.
140. ECD (European Council Directive 89/297/EEC). 1989 Underride Protection for Unprotected Road Users. April13. Available at http://eur-lex.europa. eu/LexUriServ/LexUriServ.do?uriCELEX:31989L0297:EN:NOT.
141. Englar, R. 2005. The application of pneumatic aerodynamic technology to improve drag reduction, performance, safety, and control of advanced automotive vehicles. Proceedings of the 2004 NASA/ONR Circulation Control Workshop, Part 2, pp. 957-995. June. Available from http://ntrs. nasa.gov/search.jsp?R421681&id4&asfalse&orfalse&qsNe%3D 25%26Ns%3DHarvestDate%257c0%26N%3D255%2B32.
142. EPA (U.S. Environmental Protection Agency). 2009. Websites for the EPA SmartWay Program, including http://www.epa.gov/smartway/ transport/what-smartway/tractor-trailer-tech.htm (accessed 13/09/09) and http://www.epa.gov/smartway/transport/what-smartway/tractortrailer- markuse.htm (accessed September 13, 2009).
143. FleetOwner. 2009. Superlight trucks are coming. FleetOwner Web Magazine. June 25. Available at http://fleetowner.com/trucking_around_ world/building-lighter-trucks-0625/.
144. Fritz, H. 1999. Longitudinal and lateral control of heavy duty trucks for automated vehicle following in mixed traffic: Experimental results from the CHAUFFEUR Project. Proceedings of the 1999 IEEE International Conference on Control Applications. Kohala Coast-Island of Hawaii, State of Hawaii, August.
145. Fritz, H., A. Gern, H. Schiemenz, and C. Bonnet. 2004. CHAUFFEUR Assistant-A Driver Assistance System for Commercial Vehicles Based on Fusion of Advanced ACC and Lane Keeping. IEEE 2004 Intelligent Vehicles Symposium. Parma, Italy. June.
146. Goodyear (Goodyear Tire and Rubber Company). 2003. Radial Truck Tire and Retread Manual. Manual No. 700-862-932-505.
147. Hellstrom, E., M. Ivarsson, J. Aslund, and L. Nielson. 2007. Look Ahead Control for Heavy Trucks to Minimize Trip Time and Fuel Consumption. Presented at the Fifth IFAC (International Federation of Automatic Control) Symposium on Advances in Automotive Control, Aptos, Calif., August 20-22.
148. Hendricks, T., and M. O'Keefe. 2002. Heavy Vehicle Auxiliary Load Electrification for the Essential Power System Program: Benefits, Tradeoffs, and Remaining Challenges. Golden, Colo.: National Renewable Energy Laboratory.
149. IFEU (Institut für Energieund Umweltforschung, Heidelberg GmbH). 2003. Energy Savings by Lightweighting. Heidelberg, Germany: IFEU.
150. Johannesson, L., M. Asbogard, and B. Egardt. 2007. Assessing the potential of predictive control for hybrid vehicle powertrains using stochastic dynamic programming. IEEE Transactions on Intelligent Transportation Systems, Vol. 8, No. 1. March.
151. Kenworth. 2008. White paper on fuel economy. Paper No. WP-FE08.
152. Kenworth Truck Company. August. Available at http://www.kenworth. com/FuelEconomyWhitePaper.pdf.
153. Kessels, J. 2007. Electronic Horizon: Energy Management Using Telematics Information. Presented at the IEEE 2007 Vehicle Power and Propulsion Conference, September.
154. Kim, T., C. Manzie, and H. Watson. 2008. Fuel economy benefits of lookahead capability in a mild hybrid configuration. Proceedings of the 17th World Congress of IFAC, Seoul, Korea, July.
155. Knee, B., O. Franzese, N. Wood, M. Arant, D. Hall, S. Nelson, R. Hathaway, M. Keil, P. Pollock, D. Pape, S. Yeakel, and J. Petrolino. 2008. Heavy Truck Rollover Characterization (Phase A) Final Report. National Transportation Research Center, Inc., Knoxville, Tenn.
156. Kohut, N., K. Hedrick, and F. Borrelli. 2009. Integrating Traffic Data and Model Predictive Control to Improve Fuel Economy. Presented at the 12th 2009 IFAC Symposium on Transportation Systems, Redondo Beach, Calif., September.
157. Kreeb, R., and S. Brady. 2006. Tractor-Trailer Dynamic Alignment and Research. Report No. FMCSA-PSV-06-002. February.
158. LaClair, T. 2005. Rolling Resistance. Pp. 475-532 in The Pneumatic Tire (J.D. Walter and A.N. Gent, eds.). Washington, D.C.: U.S. Department of Transportation, National Highway Traffic Safety Administration.
159. Lattermann, F., K. Neiss, S. Terwen, and T. Connolly. 2004. The predictive cruise control: A system to reduce fuel consumption of heavy duty trucks. SAE Paper 2004-01-2616. Warrendale, Pa.: SAE International.
160. Lu, X., S. Shladover, and J. Hedrick. 2004. Heavy-duty truck control: Short inter-vehicle distance following. Proceedings of the 2004 American Control Conference, Boston, Mass., June.
161. Melson, J. 2007. Progress in Tires. Presentation by Michelin at the International Workshop on the Use of Wide-Base Tires, Federal Highway Administration, Turner-Fairbank Highway Research Center, McLean, Virginia, October 25-26.
162. MNA (Michelin Tires North America). 2007. International Workshop on the Use of Wide-Base Tires, Federal Highway Administration, Turner-Fairbank Highway Research Center, McLean, Virginia. October.
163. Murphy, S. 2004. How to choose a GPS fleet management system: What features are right for you? Management Quarterly, Vol. 45.
164. Navistar. 2009. MaxxForce 9 & 10. Brochure No. CGE 634 3/2009. Available at http://www.navistar.com/InternationalTrucks/PageContent/ 2010Emissions/pdf/MaxxForce9.pdf.
165. NESCCAF/ICCT, Southwest Research Institute, and TIAX. 2009. Reducing Heavy-Duty Long Haul Combination Truck Fuel Consumption and CO2 Emissions. Washington, D.C.: International Council on Clean Transportation (ICCT). October.
166. NHTSA (U.S. Department of Transportation, National Highway Traffic Safety Administration). 2009a. The Effects of Varying the Levels of Nitrogen in the Inflation Gas of Tires on Laboratory Test Performance. Report No. DOT HS 811 094. Washington, D.C.: U.S. Department of Transportation. March.
167. NHTSA. 2009b. Notice of Proposed Rulemaking, Tire Fuel Efficiency Consumer Information Program, 49 CFR Part 575 [Docket No. NHTSA-2008-0121]. RIN 2127-AK45. June.
168. Nose Cone. 2009. Nose Cone Manufacturing Co. See http://www.nosecone. com/aptruck.htm. Accessed September 16, 2009.
169. NRC (National Research Council). 2006. Transportation Research Board Special Report 286: Tires and Passenger Car Fuel Economy. Washington, D.C.: The National Academies Press.
170. NRC. 2008. Review of the 21st Century Truck Partnership. Washington, D.C.: The National Academies Press.
171. NREL (National Renewable Energy Laboratory). 2002. Milestone Report MP-540. Prepared for the U.S. Department of Energy by NREL. Golden, Colo.: NREL.
172. NREL. 2004. Milestone Report 20040901. Prepared for the U.S. Department of Energy by NREL. Golden, Colo.: NREL.
173. Ogburn, M., L. Ramroth, and A. Lovins. 2008. Transformational Trucks:Determining the Energy Efficiency Limits of a Class-8 Tractor-Trailer. Snowmass, Colo.: Rocky Mountain Institute. July. Available at http:// www.rmi.org/rmi/Library/T08-08_TransformationalTrucksEnergy Efficiency.
174. O'Keefe, M., and K. Vertin. 2002. Analysis of Hybrid Electric Propulsion Systems for Transit Buses. Report No. NREL/MP 540-32858. Golden, Colo.: National Renewable Energy Laboratory. October.
175. Peterbilt, Inc. 2009. Images from "Peterbilt Model 389" (http://www. peterbilt.com/trad389.2.aspx) and "Peterbilt Model 387" (http://www. peterbilt.com/aero387.2.aspx). Accessed October 10, 2009.
176. Rajagopalan, A., and G. Washington. 2002. Intelligent control of hybrid electric vehicles using GPS information. SAE Paper 2002-01-1936. Warrendale, Pa.: SAE International.
177. Rini, N. 2005. Carbon Fiber SMC for Class 8 Vehicle Hoods, FY 2005 Progress Report for High-Strength Weight Reduction Materials. Prepared by Volvo for the U.S. Department of Energy, Washington, D.C.
178. SAE (Society of Automotive Engineers). 2000. Recommended Practice J1343, Information Relating to Duty Cycles and Average Power Requirements of Truck and Bus Engine Accessories. Warrendale, Pa.: SAE International. August. SAE Recommended practices SAE J1252, SAE J1263, and SAE J1321.
179. Schuring, D. 1977. A new look at the definition of tire rolling loss. Presentation at the Tire Rolling Losses and Fuel Economy-An R&D Planning Workshop, SAE Conf. Proc. P-74, 31-37. Warrendale, Pa.:SAE International.
180. Smith, M., and C. Eberle. 2003. Heavy Vehicle Mass Reduction Goals and Manufacturing Challenges. Presentation at the U.S. Department of Energy Workshop on Tooling Technology for Low Volume Vehicle Production, October 28, 2003, Seattle, Wash.
181. Strimer C., D. Carder, M. Gautam, and G. Thompson. 2005. Impact of vehicle weight on truck behavior and emissions, using on-board measurement. SAE Paper 2005-01-3788. Warrendale, Pa.: SAE International.
182. Sturdy-Light. 2009. Vango Rolling Tarp Systems. Bristol, Tenn.: Sturdy-Light. Available at http://www.sturdy-lite.com/files/vangospg.php. Accessed August 25, 2009.
183. TIAX. 2009. Assessment of Fuel Economy Technologies for Medium- and Heavy-Duty Vehicles. Report prepared for the National Academy of Sciences by TIAX LLC, Cupertino, Calif., July 31.
184. TMA (Truck Manufacturers Association). 2007. Test, Evaluation, and Demonstration of Practical Devices/Systems to Reduce Aerodynamic Drag of Tractor/Semitrailer Combination Unit Trucks. Prepared for the National Energy Technology Laboratory (NTEL) under contract number DE-FC26-04NT42117. Morgantown, W. Va.: NTEL. April.
185. TMC (Technology and Maintenance Council). No date. A guide to improving commercial fleet fuel efficiency. TMC Fuel Economy Digest. Available at http://tmc.truckline.com.
186. Transport Topics. 2009. Financial and Operating Information for America's 100 Largest For-Hire and Private Fleets. Available at http://www.ttnews. com/tt100/TT100_web_FH09.pdf. Accessed September 14, 2009.
187. Volvo. 2009. Volvo Trucks Website: http://www.volvo.com/trucks/na/ens/ products/vn/vn.htm. Accessed September 13, 2009.
188. Walker, J. 2008. SENTIENCE: Using Electronic Horizon Data to Improve Hybrid Vehicle Fuel Economy. Road Transport Information and Control, RTIC 2008 and ITS United Kingdom Members' Conference, May.
189. Wall, E., et al. 2006. Progress Report for High Strength Weight Reduction Materials, FY 2006. Washington, D.C.: U.S. Department of Energy. March.
190. Wood, R. 2006. A Discussion of a Heavy Truck Advanced Aerodynamic Trailer System. Presented at the International Forum for Road Transport Technology (IFRTT) 9th International Symposium on Heavy Vehicle Weights and Dimensions, June 18-22, 2006. Pennsylvania State University, State College, Penn. Available at http://www.mne. psu.edu/ifrtt/ConferenceProceedings/ISHVWD_9_2006/docs/pdfs/session% 209/s9-4%20140.pdf.
191. Wood, R. 2009. Aerodynamic Yaw, Drag and Fuel Economy. SOLUSSolutions and Technologies LLC and Old Dominion University. August.
192. Woodrooffe, J., O. Page, D. Blower, and P. Green. 2008. Commercial Medium Tire Debris Study. Report prepared by Virginia Polytechnic Institute and State University for the U.S. Department of Transportation, National Highway Traffic Safety Administration (NHTSA). Report number DOT HS 811 060. Washington, D.C.: NHTSA.
193. American Bus Association. 2006. Commercial Bus Emissions Characterization & Idle Reduction: Idle & Urban Cycle Test Results. Prepared by the U.S. Department of Energy, U.S. Environmental Protection Agency, and U.S. Federal Highway Administration. Available at http://www.buses. org/files/download/motorcoach_idling_study.pdf.
194. AHUA (American Highway Users Alliance). 2004. Unclogging America's Arteries, 1999-2004. Available at www.highways.org.
195. American Transportation Research Institute. 2008. An Analysis of the Operational Costs of Trucking. Total Cost Summary. P. 18, Table 4. Arlington, Va.
196. Baker, H., R. Cornwell, E. Koehler, and J. Patterson. 2009. Review of Low Carbon Technologies for Heavy Goods Vehicles-Annex 1. Prepared for the U.S. Department of Transportation by Ricardo PLC, West Sussex, U.K. June.
197. Barnitt, R. 2008. BAE/Orion Hybrid Electric Buses at New York City Transit: A Generational Comparison. Technical Report NREL/TP-540-42217. March. Available at http://www1.eere.energy.gov/vehiclesandfuels/ avta/pdfs/heavy/bae-orion_he_buses.pdf.
198. Barth, M., and K. Boriboonsomsin. 2008. Real-world CO2 impacts of traffic congestion. Transportation Research Record. Submitted March 31, 2008. Washington, D.C.
199. Battelle Memorial Institute. 2005. Traffic Operations and Truck Size and Weight Regulations, Working Paper 6. Prepared for the U.S. Federal Highway Administration. February. Columbus, Ohio.
200. Bus Engineering. 2008. Comparison of WMATA's newest bus fleet. April 16.
201. Calstart HTUF Dialog, October 2008. Available at http://www.calstart. org/HomePage.aspx?aspxerrorpath/Homepage.aspx/programs/htuf/ hybrid_dialog_search.php.
202. CARB (California Air Resources Board). 2008. Final Regulation Order to Reduce Greenhouse Gas Emissions from Heavy-Duty Vehicles. Available at http://www.arb.ca.gov/regact/2008/ghghdv08/ghgfro.pdf.
203. Christidis, Panavotis, and Guillaume Leduc. 2009. Longer and Heavier Vehicles for Freight Transport. JRCC52005. European Commission Joint Research Center, Institute for Prospective Technology Studies.
204. Cooper, C. 2009. Reducing Heavy-Duty Long Haul Combination Truck Fuel Consumption and CO2 Emissions. Boston: NESCCAF.
205. Dennis, Scott M. 1988. The Intermodal Competition Model. Association of American Railroads. September.
206. DOE (U.S. Department of Energy), Energy Information Administration (EIA). 2009. Assumptions to the Annual Energy Outlook 2009. Available at http://www.eia.doe.gov/oiaf/aeo/assumption/transportation. html.
207. EPA (U.S. Environmental Protection Agency). 2006. Motor Coach Idling Field Observation Study for Washington, DC, Metro Area. Transportation and Regional Programs Division and SmartWay Transport Partnership Group, Office of Transportation and Air Quality, U.S. Environmental Protection Agency. Available at http://epa.gov/smartway/ documents/420s06004.pdf.
208. Federal Motor Carrier Safety Administration. 2007. Commercial Vehicle Facts. November. Available at http://www.fmcsa.dot.gov/facts-research/ facts-figures/analysis-statistics/cmvfacts.htm.
209. Federal Motor Carrier Safety Administration. 2008. A Motor Carrier's Guide to Improving Highway Safety. October.
210. Freight Wing, Inc. No date. Freight Wing Trailer Aerodynamics. Available at http://www.freightwing.com/.
211. IFEU (Institut für Energieund Umweltforschung, Heidelberg GmbH). 2003. Energy Savings by Lightweighting. Heidelberg, Germany: IFEU.
212. Jones, J., F. Nix, and C. Schwier. 1990. The Impact of Changes in Road User Charges on Canadian Railways. Prepared for Transport Canada by the Canadian Institute of Guided Ground Transport, Kingston, Ontario. September.
213. Lowe, M., et al., Center on Globalization Governance and Competiveness, Duke University. 2009. Manufacturing Climate Solutions, Carbon Reducing Technologies and U.S. Jobs. June 10. Available at http://www. cggc.duke.edu/environment/climatesolutions/greeneconomy_Ch9_HybridDrivetrainsforTrucks.pdf.
214. NESCCAF, ICCT, Southwest Research Institute, and TIAX. 2009. Reducing Heavy-Duty Long Haul Combination Truck Fuel Consumption and CO2 Emissions. Washington, D.C.: International Council on Clean Transportation (ICCT). October.
215. Parry, I. 2006. How Should Heavy-Duty Trucks Be Taxed? Washington, D.C.: Resources for the Future. April.
216. Ranganathan, S. 2006. Hybrid Buses Costs and Benefits. Washington, D.C.:Environmental and Energy Study Institute. Available at http://www.eesi. org/files/eesi_hybrid_bus_032007.pdf.
217. Research and Markets. 2009. Lithium-Ion and Nickel-Metal Hydride Batteries, Lithium, Rare Earth Lanthanum and the Future of Hybrid Electric Vehicles, Plug-in Hybrid Electric Vehicles and Electric Vehicles 2009-2020. Brochure. Available at www.researchandmarkets.com/. Accessed November 2, 2009.
218. Schrank, D., and T. Lomax. 2005. The 2005 Urban Mobility Report. Texas Transportation Institute, Texas A&M University System. Available at http://mobility/tamu.edu.
219. Schubert, R., and M. Kromer. 2008. Heavy-Duty Truck Retrofit Technology:Assessment and Regulatory Approach. Prepared by TIAX, LLC, for the Union of Concerned Scientists, September 12.
220. TTI (Texas Transportation Institute). 2007. 2007 Annual Urban Mobility Report, Appendix A. College Station, Tex: TTI.
221. TIAX LLC. 2009. Assessment of Fuel Economy Technologies for Mediumand Heavy-Duty Vehicles. Final Report for the National Academy of Sciences. Sept. 16.
222. Transport Canada. 2009. Freight Wing Fleet Trial Program on Aerodynamic Fairings. Modified June 26. Available at http://www.tc.gc.ca/programs/ environment/ecofreight/casestudies/freightwing-eng.htm.
223. TRB (Transportation Research Board). 2000. Highway Capacity Manual. Washington, D.C.: TRB.
224. TRB. 2009. Transportation Energy Data Book. Edition 28-2009, Table 5.14. Washington, D.C.: TRB.
225. Walsh, J. 2009. Mack delivers hybrid refuse truck to New York City. Press release, May 28.
226. Zaloshnja, E., and T. Miller. 2006. Unit Costs of Medium and Heavy Truck Crashes. Final Report. Prepared for the Federal Motor Carrier Safety Administration. December. Available from National Technical Information Service, Springfield, Va. Also available at www.ai.volpe.dot.gov/.
227. Barth, Matthew, and Kanok Boriboonsomsin. 2008. Real-world CO2 impacts of traffic congestion. Transportation Research Record, submitted March 31, 2008.
228. Cambridge Systematics. 2009. Moving Cooler: An Analysis of Transportation Strategies for Reducing Greenhouse Gas Emissions. Washington, D.C.: Urban Land Institute. July.
229. Cambridge Systematics. 2010a. Mid-Atlantic Rail Operations Study. Prepared for the I-95 Corridor Coalition. Forthcoming.
230. Cambridge Systematics. 2010b. Transportation's Role in Reducing Greenhouse Gas Emissions. Prepared for the Federal Highway Administration. Forthcoming.
231. CARB (California Air Resources Board). No date. Heavy-Duty Vehicle Greenhouse Gas Measure. Available at http://www.arb.ca.gov/cc/hdghg/ hdghg.htm.
232. CARB. 2005. Proposal to Reduce Idling Emissions from On-Road Heavy-Duty Diesel Vehicles. Available at www.arb.ca.gov/msprog/truckidling/ workshop-03-23-2005.ppt.
233. CARB. 2008. The Carl Moyers Program Guidelines: Approved Revision 2008. April 22.
234. CARB. 2009. Facts About Heavy-Duty Vehicle Greenhouse Gas Emission Reduction Regulation: Reducing Climate Change Emissions from Tractor-Trailers. June 30.
235. Corbett, J.J., and J.J. Winebrake. 2007. Sustainable movement of goods:Energy and environmental implications of trucks, trains, ships, and planes, Environmental Management (November): 8-12.
236. DOE (U.S. Department of Energy). 2008. Energy Market and Economic Impacts of S. 2191, the Lieberman-Warner Climate Security Act of 2007. Energy Information Administration. Available at http://www.eia. doe.gov/ oiaf/service:rpts.htm.
237. DOT (U.S. Department of Transportation). 2000. The U.S. Department of Transportation's Transportation Comprehensive Truck Size and Weight Study. August. Available at http://www.fhwa.dot.gov/reports/tswstudy/TSWfinal.htm.
238. EEA (Energy and Environmental Analysis). 2008.Market-Based Approaches to Fuel Economy: Summary of Policy Options. Prepared for National Energy Technology Laboratory, U.S. Department of Energy.
239. EPA (U.S. Environmental Protection Agency). No date. Federal Excise Tax Exemption. Available at http://www.epa.gov/smartway/transport/whatsmartway/ idling-reduction-fet.htm.
240. EPA. 2004. A Glance at Clean Freight Strategies: Idle Reduction. February. Available at http://nepis.epa.gov/Exe/ZyPURL.cgi?DockeyP1000S9K. txt.
241. EPA. 2009a. Federal Tax Credits for Energy Efficiency. Updated September 14. Available at http://www.energystar.gov/index.cfm?ctax_credits. tx_index#s3.
242. EPA. 2009b. Innovative Financing: SmartWay Clean Diesel Finance Program. August. Available at http://www.epa.gov/otaq/smartway/ transport/what-smartway/financing-clean-diesel-info.htm.
243. FHWA (Federal Highway Administration). No date. Corridor: Interstate 70 (I-70): Dedicated Truck Lanes-Missouri to Ohio. Available at http:// www.corridors.dot.gov/i70.htm.
244. FHWA. 1997. Federal Highway Cost Allocation Study.
245. FHWA. 2005. I-71 0 Major Corridor Study, Final Report. March.
246. Freight Best Practice. 2009. Examples of Cost Savings. Available at www. freightbestpractice.org/examples-of-cost-savings.
247. Greszler, A. 2009. Heavy duty vehicle fleet technologies for reducing carbon dioxide: An industry perspective. Pp. 101-116 in Reducing Climate Impacts in the Transportation Sector, D. Sperling and J.S. Cannon, eds. Springer.
248. Hourdakis, J., and P.G. Michalopoulos. 2001. Evaluation of Ramp Control Effectiveness in Two Twin Cities Freeways, Transportation Research Board 2002 Annual Meeting, Washington, D.C.
249. Latty, J. 2009. JCL Driver Training, Southport, Merseyside, England. Available at www.jcldrivertraining.co.uk.
250. Leavitt, W. 2005. Idle cash. FleetOwner. April.
251. Maccubbin, R., B. Staples, F. Kabir, C. Lowrance, M. Mercer, B. Phillips, and S. Gordon. 2008. Intelligent Transportation Systems Benefits, Costs, Deployment, and Lessons Learned: 2008 Update. Report No. FHWA-JPO-08-032. Federal Highway Administration, U.S. Department of Transportation.
252. McKinnon, A. 2005. The economic and environmental benefits of increasing Maximum Truck Weight: The British Experience. Transportation Research Part D: Transport and Environment 10(1): 77-95.
253. Miller, E. 2009. EPA exempts 70 idle-reduction devices from federal excise tax for first time. Transport Topics, February 2, p. 4.
254. NESCCAF/ICCT, Southwest Research Institute, and TIAX. 2009. Reducing Heavy-Duty Long Haul Combination Truck Fuel Consumption and CO2 Emissions. Washington, D.C.: International Council on Clean Transportation (ICCT). October.
255. RTAC (Roads and Transportation Association of Canada). 1986. Vehicle Weights and Dimensions Study-Technical Steering Committee Report. December.
256. TIAX LLC. 2009. Assessment of Fuel Economy Technologies for Mediumand Heavy-Duty Vehicles. Final Report for the National Academy of Sciences. Sept. 16.
257. Transport for London. 2006. Central London Congestion Charging: Impacts Monitoring, Fourth Annual Report. June.
258. TRB (Transportation Research Board). 1990a. Special Report 225: Truck Weight Limits: Issues and Options. Washington, D.C.: TRB.
259. TRB. 1990b. Special Report 227: New Trucks for Greater Productivity and Less Road Wear: An Evaluation of the Turner Proposal. Washington, D.C.: TRB.
260. TRB. 2002. Special Report 267: Regulation of Weights, Lengths, and Widths of Commercial Motor Vehicles. Washington, D.C.: TRB.
261. TRB. 2000. Highway Capacity Manual. Washington, D.C.: TRB.
262. Tunnell, M. 2008. Energy and Emissions Impacts of Operating Higher Productivity Vehicles: Update: 2008. American Trucking Research Institute. March.
263. Winebrake, J.J., J.J. Corbett, A. Falzarano, J.S. Hawker, K. Korfmacher, S. Ketha, and S. Zilora. 2008. Assessing energy, environmental, and economic tradeoffs in intermodal freight transportation. Journal of the Air and Waste Management Association 58(8): 1004-1013.
264. Woodrooffe, J., B. Belzowski, J. Reese, and P. Sweatman. 2009. Analysis of the Potential Benefits of Larger Trucks for U.S. Businesses Operating Private Fleets. Prepared for the National Private Truck Council. University of Michigan Transportation Research Institute. May.
265. Bradley, M.J. and Associates LLC. 2009. Setting the Stage for Regulation of Heavy-Duty Vehicle Fuel Economy and GHG Emissions: Issues and Opportunities. Washington D.C.: International Council on Clean Transportation. February.
266. Davis, S., S. Diegel, and R.G. Boundy. 2009. Transportation Energy Data Book, Edition 28. Rept. No. ORNL-6984. Knoxville, Tenn.: U.S. Department of Energy, Energy Efficiency and Renewable Energy.
267. DOC (U.S Department of Commerce), Census Bureau. 2005. 2002 Economic Census, Industry Product Analysis. March. Washington, D.C.
268. DOE, EIA (U.S. Department of Energy, Energy Information Administration). 2009a. Annual Energy Review 2008. DOE/EIA-0384(2008). Washington, D.C.: EIA.
269. DOE, EIA. 2009b. Annual Energy Outlook 2009. DOE/EIA-DOE/EIA-0383(2009). March. Washington, D.C.: EIA.
270. Federal Highway Administration, Highway Statistics Summary to 1995, Table VM-201A and Highway Statistics (annual releases), Table VM-1. Washington D.C.
271. NESCCAF, ICCT, SwRI. 2009. Regulation of Heavy-Duty Vehicle Fuel Economy and GHG Emissions: Issues and Opportunities. October. Available at www.nescaum.org/.../heavy-duty-truck-ghg_report_final-200910.pdf.
272. TIAX, LLC. 2009. Assessment of Fuel Economy Technologies for Medium- and Heavy- Duty Vehicles. Final Report. Report to the National Academy of Sciences. Cambridge, Mass. September.