-
1
-
-
8744254433
-
A literature review of poly(Lactic acid)
-
Garlotta D (2001) A literature review of poly(lactic acid). J Polym Environ 9(2):63-84
-
(2001)
J Polym Environ
, vol.9
, Issue.2
, pp. 63-84
-
-
Garlotta, D.1
-
2
-
-
27944493618
-
Fundamental solution and single-chain properties of polylactides
-
Dorgan JR, Janzen J, Knauss DM, Hait SB, Limoges BR, Hutchinson MH (2005) Fundamental solution and single-chain properties of polylactides. J Polym Sci B Polym Phys 43(21):3100-3111. doi:10.1002/polb.20577
-
(2005)
J Polym Sci B Polym Phys
, vol.43
, Issue.21
, pp. 3100-3111
-
-
Dorgan, J.R.1
Janzen, J.2
Knauss, D.M.3
Hait, S.B.4
Limoges, B.R.5
Hutchinson, M.H.6
-
3
-
-
84958025559
-
A comparison of the rheological and mechanical properties of isotactic, syndiotactic, and heterotactic poly(Lactide)
-
Chile L-E, Mehrkhodavandi P, Hatzikiriakos SG (2016) A comparison of the rheological and mechanical properties of isotactic, syndiotactic, and heterotactic poly(lactide). Macromolecules 49(3):909-919. doi:10.1021/acs.macromol.5b02568
-
(2016)
Macromolecules
, vol.49
, Issue.3
, pp. 909-919
-
-
Chile, L.-E.1
Mehrkhodavandi, P.2
Hatzikiriakos, S.G.3
-
4
-
-
1542365430
-
Structural effect of linear and star-shaped poly(L-lactic acid) on physical properties
-
Kim ES, Kim BC, Kim SH (2004) Structural effect of linear and star-shaped poly(L-lactic acid) on physical properties. J Polym Sci B Polym Phys 42(6):939-946. doi:10.1002/polb. 10685
-
(2004)
J Polym Sci B Polym Phys
, vol.42
, Issue.6
, pp. 939-946
-
-
Kim, E.S.1
Kim, B.C.2
Kim, S.H.3
-
5
-
-
84859008710
-
Wall slip and melt fracture of poly(Lactides)
-
Othman N, Jazrawi B, Mehrkhodavandi P, Hatzikiriakos SG (2012) Wall slip and melt fracture of poly(lactides). Rheol Acta 51(4):357-369. doi:10.1007/s00397-011-0613-7
-
(2012)
Rheol Acta
, vol.51
, Issue.4
, pp. 357-369
-
-
Othman, N.1
Jazrawi, B.2
Mehrkhodavandi, P.3
Hatzikiriakos, S.G.4
-
6
-
-
80051661837
-
Solution and melt viscoelastic properties of controlled microstructure poly(Lactide)
-
Othman N, Acosta-Ramirez A, Mehrkhodavandi P, Dorgan JR, Hatzikiriakos SG (2011) Solution and melt viscoelastic properties of controlled microstructure poly(lactide). J Rheol 55(5):987-1005. doi:10.1122/1.3609853
-
(2011)
J Rheol
, vol.55
, Issue.5
, pp. 987-1005
-
-
Othman, N.1
Acosta-Ramirez, A.2
Mehrkhodavandi, P.3
Dorgan, J.R.4
Hatzikiriakos, S.G.5
-
7
-
-
0035248944
-
Melt rheology of high L-content poly(Lactic acid)
-
Palade LI, Lehermeier HJ, Dorgan JR (2001) Melt rheology of high L-content poly(lactic acid). Macromolecules 34(5):1384-1390. doi:10.1021/ma001173b
-
(2001)
Macromolecules
, vol.34
, Issue.5
, pp. 1384-1390
-
-
Palade, L.I.1
Lehermeier, H.J.2
Dorgan, J.R.3
-
9
-
-
0000859364
-
Melt rheology of poly(Lactic acid): Entanglement and chain architecture effects
-
Dorgan JR, Williams JS, Lewis DN (1999) Melt rheology of poly(lactic acid): Entanglement and chain architecture effects. J Rheol 43(5):1141-1155. doi:10.1122/1.551041
-
(1999)
J Rheol
, vol.43
, Issue.5
, pp. 1141-1155
-
-
Dorgan, J.R.1
Williams, J.S.2
Lewis, D.N.3
-
10
-
-
0028515833
-
Chain entanglement, mechanical-properties and drawability of poly(Lactide)
-
Grijpma DW, Penning JP, Pennings AJ (1994) Chain entanglement, mechanical-properties and drawability of poly(lactide). Colloid Polym Sci 272(9):1068-1081. doi:10.1007/ bf00652375
-
(1994)
Colloid Polym Sci
, vol.272
, Issue.9
, pp. 1068-1081
-
-
Grijpma, D.W.1
Penning, J.P.2
Pennings, A.J.3
-
11
-
-
27944446131
-
Melt rheology of variable L-content poly(Lactic acid)
-
Dorgan JR, Janzen J, Clayton MP, Hait SB, Knauss DM (2005) Melt rheology of variable L-content poly(lactic acid). J Rheol 49(3):607-619. doi:10.1122/1.1896957
-
(2005)
J Rheol
, vol.49
, Issue.3
, pp. 607-619
-
-
Dorgan, J.R.1
Janzen, J.2
Clayton, M.P.3
Hait, S.B.4
Knauss, D.M.5
-
12
-
-
0034746458
-
RIS metropolis Monte Carlo studies of poly(L-lactic), poly(L,D-lactic) and polyglycolic acids
-
Blomqvist J (2001) RIS metropolis Monte Carlo studies of poly(L-lactic), poly(L,D-lactic) and polyglycolic acids. Polymer 42(8):3515-3521. doi:10.1016/s0032-3861(00)00704-7
-
(2001)
Polymer
, vol.42
, Issue.8
, pp. 3515-3521
-
-
Blomqvist, J.1
-
13
-
-
0032971504
-
Rheological properties of amorphous and semicrystalline polylactic acid polymers
-
Fang Q, Hanna MA (1999) Rheological properties of amorphous and semicrystalline polylactic acid polymers. Ind Crop Prod 10(1):47-53. doi:10.1016/s0926-6690(99)00009-6
-
(1999)
Ind Crop Prod
, vol.10
, Issue.1
, pp. 47-53
-
-
Fang, Q.1
Hanna, M.A.2
-
14
-
-
84866442889
-
Melt strength and rheological properties of biodegradable poly(Lactic acid) modified via alkyl radical-based reactive extrusion processes
-
Dean KM, Petinakis E, Meure S, Yu L, Chryss A (2012) Melt strength and rheological properties of biodegradable poly(lactic acid) modified via alkyl radical-based reactive extrusion processes. J Polym Environ 20(3):741-747. doi:10.1007/s10924-012-0461-2
-
(2012)
J Polym Environ
, vol.20
, Issue.3
, pp. 741-747
-
-
Dean, K.M.1
Petinakis, E.2
Meure, S.3
Yu, L.4
Chryss, A.5
-
15
-
-
82455192716
-
High-viscosity polylactide prepared by in situ reaction of carboxyl-ended polyester and solid epoxy
-
Zhang JL, Li G, Su YZ, Qi RR, Ye DD, Yu J, Huang SW (2012) High-viscosity polylactide prepared by in situ reaction of carboxyl-ended polyester and solid epoxy. J Appl Polym Sci 123(5):2996-3006. doi:10.1002/app.34951
-
(2012)
J Appl Polym Sci
, vol.123
, Issue.5
, pp. 2996-3006
-
-
Zhang, J.L.1
Li, G.2
Su, Y.Z.3
Qi, R.R.4
Ye, D.D.5
Yu, J.6
Huang, S.W.7
-
16
-
-
0034578737
-
Thermal and rheological properties of commercial-grade poly(Lactic acid)s
-
Dorgan JR, Lehermeier H, Mang M (2000) Thermal and rheological properties of commercial-grade poly(lactic acid)s. J Polym Environ 8(1):1-9. doi:10.1023/ a:1010185910301
-
(2000)
J Polym Environ
, vol.8
, Issue.1
, pp. 1-9
-
-
Dorgan, J.R.1
Lehermeier, H.2
Mang, M.3
-
17
-
-
84930640846
-
Biopolymer blends based on poly (Lactic acid): Shear and elongation rheology/structure/blowing process relationships
-
Al-Itry R, Lamnawar K, Maazouz A (2015) Biopolymer blends based on poly (lactic acid): shear and elongation rheology/structure/blowing process relationships. Polymers 7(5): 939-962. doi:10.3390/polym7050939
-
(2015)
Polymers
, vol.7
, Issue.5
, pp. 939-962
-
-
Al-Itry, R.1
Lamnawar, K.2
Maazouz, A.3
-
18
-
-
84957727592
-
Reactive modification and compatibilization of poly(Lactide) and poly(butylene adipate-co-terephthalate) blends with epoxy functionalizedpoly(lactide) for blown film applications
-
Schneider J, Manjure S, Narayan R (2016) Reactive modification and compatibilization of poly(lactide) and poly(butylene adipate-co-terephthalate) blends with epoxy functionalizedpoly(lactide) for blown film applications. J Appl Polym Sci 133(16):43310. doi:10.1002/app. 43310
-
(2016)
J Appl Polym Sci
, vol.133
, Issue.16
, pp. 43310
-
-
Schneider, J.1
Manjure, S.2
Narayan, R.3
-
19
-
-
84865512703
-
Rheology and crystallization of long-chain branched poly(L-lactide)s with controlled branch length
-
Wang LY, Jing XB, Cheng HB, Hu XL, Yang LX, Huang YB (2012) Rheology and crystallization of long-chain branched poly(L-lactide)s with controlled branch length. Ind Eng Chem Res 51(33):10731-10741. doi:10.1021/ie300524j
-
(2012)
Ind Eng Chem Res
, vol.51
, Issue.33
, pp. 10731-10741
-
-
Wang, L.Y.1
Jing, X.B.2
Cheng, H.B.3
Hu, X.L.4
Yang, L.X.5
Huang, Y.B.6
-
20
-
-
84936772133
-
Superior performance of fully biobased poly(Lactide) via stereocomplexation-induced phase separation: Structure versus property
-
Ma PM, Shen TF, Xu PW, Dong WF, Lemstra PJ, Chen MQ (2015) Superior performance of fully biobased poly(lactide) via stereocomplexation-induced phase separation: structure versus property. ACS Sustain Chem Eng 3(7):1470-1478. doi:10.1021/acssuschemeng. 5b00208
-
(2015)
ACS Sustain Chem Eng
, vol.3
, Issue.7
, pp. 1470-1478
-
-
Ma, P.M.1
Shen, T.F.2
Xu, P.W.3
Dong, W.F.4
Lemstra, P.J.5
Chen, M.Q.6
-
21
-
-
84855847136
-
Deformationmediated superstructures and cavitation of poly (L-lactide): In-situ small-angle X-ray scattering study
-
Zhang X, Schneider K, Liu G, Chen J, Brüning K, Wang D, Stamm M (2012) Deformationmediated superstructures and cavitation of poly (L-lactide): in-situ small-angle X-ray scattering study. Polymer 53(2):648-656. doi:10.1016/j.polymer.2011.12.002
-
(2012)
Polymer
, vol.53
, Issue.2
, pp. 648-656
-
-
Zhang, X.1
Schneider, K.2
Liu, G.3
Chen, J.4
Brüning, K.5
Wang, D.6
Stamm, M.7
-
22
-
-
84899407407
-
Cavitation during deformation of semicrystalline polymers
-
Pawlak A, Galeski A, Rozanski A (2014) Cavitation during deformation of semicrystalline polymers. Prog Polym Sci 39(5):921-958. doi:10.1016/j.progpolymsci.2013.10.007
-
(2014)
Prog Polym Sci
, vol.39
, Issue.5
, pp. 921-958
-
-
Pawlak, A.1
Galeski, A.2
Rozanski, A.3
-
23
-
-
76149089223
-
Strain-induced molecular ordering in polylactide upon uniaxial stretching
-
Stoclet G, Seguela R, Lefebvre JM, Elkoun S, Vanmansart C (2010) Strain-induced molecular ordering in polylactide upon uniaxial stretching. Macromolecules 43(3):1488-1498. doi:10.1021/ma9024366
-
(2010)
Macromolecules
, vol.43
, Issue.3
, pp. 1488-1498
-
-
Stoclet, G.1
Seguela, R.2
Lefebvre, J.M.3
Elkoun, S.4
Vanmansart, C.5
-
24
-
-
15944374794
-
Nonlinear mechanooptical behavior of uniaxially stretched poly(Lactic acid): Dynamic phase behavior
-
Mulligan J, Cakmak M (2005) Nonlinear mechanooptical behavior of uniaxially stretched poly(lactic acid): dynamic phase behavior. Macromolecules 38(6):2333-2344
-
(2005)
Macromolecules
, vol.38
, Issue.6
, pp. 2333-2344
-
-
Mulligan, J.1
Cakmak, M.2
-
25
-
-
79959481523
-
Thermal and strain-induced chain ordering in lactic acid stereocopolymers: Influence of the composition in stereomers
-
Stoclet G, Seguela R, Lefebvre JM, Li S, Vert M (2011) Thermal and strain-induced chain ordering in lactic acid stereocopolymers: influence of the composition in stereomers. Macromolecules 44(12):4961-4969. doi:10.1021/ma200469t
-
(2011)
Macromolecules
, vol.44
, Issue.12
, pp. 4961-4969
-
-
Stoclet, G.1
Seguela, R.2
Lefebvre, J.M.3
Li, S.4
Vert, M.5
-
26
-
-
84897036811
-
In-situ SAXS study of the plastic deformation behavior of polylactide upon cold-drawing
-
Stoclet G, Lefebvre JM, Seguela R, Vanmansart C (2014) In-situ SAXS study of the plastic deformation behavior of polylactide upon cold-drawing. Polymer 55(7):1817-1828. doi:10. 1016/j.polymer.2014.02.010
-
(2014)
Polymer
, vol.55
, Issue.7
, pp. 1817-1828
-
-
Stoclet, G.1
Lefebvre, J.M.2
Seguela, R.3
Vanmansart, C.4
-
27
-
-
26844455272
-
Crystallization, structure and properties of plasticized poly (L-lactide)
-
Kulinski Z, Piorkowska E (2005) Crystallization, structure and properties of plasticized poly (L-lactide). Polymer 46(23):10290-10300. doi:10.1016/j.polymer.2005.07.101
-
(2005)
Polymer
, vol.46
, Issue.23
, pp. 10290-10300
-
-
Kulinski, Z.1
Piorkowska, E.2
-
28
-
-
0242658917
-
Strength and toughness of crystalline polymer systems
-
Galeski A (2003) Strength and toughness of crystalline polymer systems. Prog Polym Sci 28(12):1643-1699. doi:10.1016/j.progpolymsci.2003.09.003
-
(2003)
Prog Polym Sci
, vol.28
, Issue.12
, pp. 1643-1699
-
-
Galeski, A.1
-
29
-
-
0020776792
-
Craze fibril formation and breakdown
-
Kramer EJ (1984) Craze fibril formation and breakdown. Polym Eng Sci 24(10):761-769. doi:10.1002/pen.760241006
-
(1984)
Polym Eng Sci
, vol.24
, Issue.10
, pp. 761-769
-
-
Kramer, E.J.1
-
30
-
-
38349122132
-
Enthalpy relaxation and embrittlement of poly(L-lactide) during physical aging
-
Pan PJ, Zhu B, Inoue Y (2007) Enthalpy relaxation and embrittlement of poly(L-lactide) during physical aging. Macromolecules 40(26):9664-9671. doi:10.1021/ma071737c
-
(2007)
Macromolecules
, vol.40
, Issue.26
, pp. 9664-9671
-
-
Pan, P.J.1
Zhu, B.2
Inoue, Y.3
-
32
-
-
33746308758
-
Plasticization of poly(L-lactide) with poly(propylene glycol)
-
Kulinski Z, Piorkowska E, Gadzinowska K, Stasiak M (2006) Plasticization of poly(l-lactide) with poly(propylene glycol). Biomacromolecules 7(7):2128-2135
-
(2006)
Biomacromolecules
, vol.7
, Issue.7
, pp. 2128-2135
-
-
Kulinski, Z.1
Piorkowska, E.2
Gadzinowska, K.3
Stasiak, M.4
-
33
-
-
84855461489
-
Effect of crystallization on barrier properties of formulated polylactide
-
Courgneau C, Domenek S, Lebosse R, Guinault A, Averous L, Ducruet V (2012) Effect of crystallization on barrier properties of formulated polylactide. Polym Int 61(2):180-189. doi:10.1002/pi.3167
-
(2012)
Polym Int
, vol.61
, Issue.2
, pp. 180-189
-
-
Courgneau, C.1
Domenek, S.2
Lebosse, R.3
Guinault, A.4
Averous, L.5
Ducruet, V.6
-
34
-
-
0030567019
-
Effect of molecular weight and crystallinity on poly (Lactic acid) mechanical properties
-
Perego G, Cella GD, Bastioli C (1996) Effect of molecular weight and crystallinity on poly (lactic acid) mechanical properties. J Appl Polym Sci 59(1):37-43. doi:10.1002/(SICI)1097-4628(19960103)59:1<37::AID-APP6>3.0.CO;2-N
-
(1996)
J Appl Polym Sci
, vol.59
, Issue.1
, pp. 37-43
-
-
Perego, G.1
Cella, G.D.2
Bastioli, C.3
-
35
-
-
20444421237
-
The effect of crystallinity on the deformation mechanism and bulk mechanical properties of PLLA
-
Renouf-Glauser AC, Rose J, Farrar DF, Cameron RE (2005) The effect of crystallinity on the deformation mechanism and bulk mechanical properties of PLLA. Biomaterials 26(29): 5771-5782. doi:10.1016/j.biomaterials.2005.03.002
-
(2005)
Biomaterials
, vol.26
, Issue.29
, pp. 5771-5782
-
-
Renouf-Glauser, A.C.1
Rose, J.2
Farrar, D.F.3
Cameron, R.E.4
-
36
-
-
79954580221
-
Influence of crystal polymorphism on mechanical and barrier properties of poly(L-lactic acid)
-
Cocca M, Di Lorenzo ML, Malinconico M, Frezza V (2011) Influence of crystal polymorphism on mechanical and barrier properties of poly(L-lactic acid). Eur Polym J 47: 1073-1080
-
(2011)
Eur Polym J
, vol.47
, pp. 1073-1080
-
-
Cocca, M.1
Di Lorenzo, M.L.2
Malinconico, M.3
Frezza, V.4
-
37
-
-
85032013556
-
-
Accessed 28 April 2016
-
Corbion. PLA polymers. http://www.corbion.com/bioplastics/products/pla-polymers. Accessed 28 April 2016
-
PLA Polymers
-
-
-
38
-
-
85031996151
-
-
NatureWorks (2016) Food and beverage packaging. http://www.natureworksllc.com/Prod uct-and-Applications/Films
-
(2016)
Food and Beverage Packaging
-
-
-
39
-
-
84966693638
-
Palm oil deodorizer distillate as toughening agent in polylactide packaging films
-
Ruellan A, Ducruet V, Gratia A, Saelices Jimenez L, Guinault A, Sollogoub C, Chollet G, Domenek S (2016) Palm oil deodorizer distillate as toughening agent in polylactide packaging films. Polym Int 65(6):683-690. doi:10.1002/pi.5114
-
(2016)
Polym Int
, vol.65
, Issue.6
, pp. 683-690
-
-
Ruellan, A.1
Ducruet, V.2
Gratia, A.3
Saelices Jimenez, L.4
Guinault, A.5
Sollogoub, C.6
Chollet, G.7
Domenek, S.8
-
40
-
-
33748575870
-
Plasticization of semi-cristalline poly(L-lactide) with poly(propylene glycol)
-
Piorkowska E, Kulinski Z, Galeski A, Masirek R (2006) Plasticization of semi-cristalline poly(L-lactide) with poly(propylene glycol). Polymer 47(20):7178-7188
-
(2006)
Polymer
, vol.47
, Issue.20
, pp. 7178-7188
-
-
Piorkowska, E.1
Kulinski, Z.2
Galeski, A.3
Masirek, R.4
-
41
-
-
79957840290
-
Analysis of the structure-properties relationships of different multiphase systems based on plasticized poly (Lactic acid)
-
Courgneau C, Domenek S, Guinault A, Averous L, Ducruet V (2011) Analysis of the structure-properties relationships of different multiphase systems based on plasticized poly (lactic acid). J Polym Environ 19(2):362-371. doi:10.1007/s10924-011-0285-5
-
(2011)
J Polym Environ
, vol.19
, Issue.2
, pp. 362-371
-
-
Courgneau, C.1
Domenek, S.2
Guinault, A.3
Averous, L.4
Ducruet, V.5
-
42
-
-
84943180726
-
Industrial vegetable oil by-products increase the ductility of polylactide
-
Ruellan A, Guinault A, Sollogoub C, Chollet G, Ait-Mada A, Ducruet V, Domenek S (2015) Industrial vegetable oil by-products increase the ductility of polylactide. Express Polym Lett 9(12):1087-1103. doi:10.3144/expresspolymlett.2015.98
-
(2015)
Express Polym Lett
, vol.9
, Issue.12
, pp. 1087-1103
-
-
Ruellan, A.1
Guinault, A.2
Sollogoub, C.3
Chollet, G.4
Ait-Mada, A.5
Ducruet, V.6
Domenek, S.7
-
44
-
-
16344373620
-
Tensile and impact behavior of polypropylene/low density polyethylene blends
-
Strapasson R, Amico SC, Pereira MFR, Sydenstricker THD (2005) Tensile and impact behavior of polypropylene/low density polyethylene blends. Polym Test 24(4):468-473. doi:10.1016/j.polymertesting.2005.01.001
-
(2005)
Polym Test
, vol.24
, Issue.4
, pp. 468-473
-
-
Strapasson, R.1
Amico, S.C.2
Pereira, M.3
Sydenstricker, T.4
-
45
-
-
0141761312
-
Study of the influence of plasticizers on the thermal and mechanical properties of poly(3-hydroxybutyrate) compounds
-
Baltieri RC, Mei LHI, Bartoli J (2003) Study of the influence of plasticizers on the thermal and mechanical properties of poly(3-hydroxybutyrate) compounds. Macromol Symp 197: 33-44
-
(2003)
Macromol Symp
, vol.197
, pp. 33-44
-
-
Baltieri, R.C.1
Mei, L.2
Bartoli, J.3
-
46
-
-
0347656848
-
Mechanical, physical, and barrier properties of poly(Lactide) films
-
Auras RA, Harte B, Selke S, Hernandez R (2003) Mechanical, physical, and barrier properties of poly(lactide) films. J Plast Film Sheet 19(2):123-135
-
(2003)
J Plast Film Sheet
, vol.19
, Issue.2
, pp. 123-135
-
-
Auras, R.A.1
Harte, B.2
Selke, S.3
Hernandez, R.4
-
47
-
-
75149143490
-
Comparative study on development of structural hierarchy in constrained annealed simultaneous and sequential biaxially stretched polylactic acid films
-
Ou X, Cakmak M (2010) Comparative study on development of structural hierarchy in constrained annealed simultaneous and sequential biaxially stretched polylactic acid films. Polymer 51(3):783-792. doi:10.1016/j.polymer.2009.11.058
-
(2010)
Polymer
, vol.51
, Issue.3
, pp. 783-792
-
-
Ou, X.1
Cakmak, M.2
-
48
-
-
0035814210
-
An analysis of the correlation between structural anisotropy and dimensional stability for drawn poly(Lactic acid) films
-
Smith PB, Leugers A, Kang SH, Hsu SL, Yang XZ (2001) An analysis of the correlation between structural anisotropy and dimensional stability for drawn poly(lactic acid) films. J Appl Polym Sci 82(10):2497-2505. doi:10.1002/app.2100
-
(2001)
J Appl Polym Sci
, vol.82
, Issue.10
, pp. 2497-2505
-
-
Smith, P.B.1
Leugers, A.2
Kang, S.H.3
Hsu, S.L.4
Yang, X.Z.5
-
49
-
-
77955306839
-
Crystallinity and dimensional stability of biaxial oriented poly(Lactic acid) films
-
Tsai CC, Wu RJ, Cheng HY, Li SC, Siao YY, Kong DC, Jang GW (2010) Crystallinity and dimensional stability of biaxial oriented poly(lactic acid) films. Polym Degrad Stab 95(8): 1292-1298. doi:10.1016/j.polymdegradstab.2010.02.032
-
(2010)
Polym Degrad Stab
, vol.95
, Issue.8
, pp. 1292-1298
-
-
Tsai, C.C.1
Wu, R.J.2
Cheng, H.Y.3
Li, S.C.4
Siao, Y.Y.5
Kong, D.C.6
Jang, G.W.7
-
50
-
-
84859968979
-
Water barrier properties in biaxially drawn poly(Lactic acid) films
-
Delpouve N, Stoclet G, Saiter A, Dargent E, Marais S (2012) Water barrier properties in biaxially drawn poly(lactic acid) films. J Phys Chem B 116(15):4615-4625. doi:10.1021/ jp211670g
-
(2012)
J Phys Chem B
, vol.116
, Issue.15
, pp. 4615-4625
-
-
Delpouve, N.1
Stoclet, G.2
Saiter, A.3
Dargent, E.4
Marais, S.5
-
51
-
-
55049110075
-
Influence of biaxial stretching mode on the crystalline texture in polylactic acid films
-
Ou X, Cakmak M (2008) Influence of biaxial stretching mode on the crystalline texture in polylactic acid films. Polymer 49:5344-5352
-
(2008)
Polymer
, vol.49
, pp. 5344-5352
-
-
Ou, X.1
Cakmak, M.2
-
52
-
-
84930638161
-
Isotropically small crystalline lamellae induced by high biaxialstretching rate as a key microstructure for super-tough polylactide film
-
Jariyasakoolroj P, Tashiro K, Wang H, Yamamoto H, Chinsirikul W, Kerddonfag N, Chirachanchai S (2015) Isotropically small crystalline lamellae induced by high biaxialstretching rate as a key microstructure for super-tough polylactide film. Polymer 68:234-245. doi:10.1016/j.polymer.2015.05.006
-
(2015)
Polymer
, vol.68
, pp. 234-245
-
-
Jariyasakoolroj, P.1
Tashiro, K.2
Wang, H.3
Yamamoto, H.4
Chinsirikul, W.5
Kerddonfag, N.6
Chirachanchai, S.7
-
53
-
-
84937391923
-
Plasticization of poly(Lactide)
-
Jiménez A, Peltzer M, Ruseckaite RA, The Royal Society of Chemistry, London
-
Ruellan A, Ducruet V, Domenek S (2015) Plasticization of poly(lactide). In: Jiménez A, Peltzer M, Ruseckaite RA (eds) Poly(lactic acid) science and technology: processing, properties, additives and applications. The Royal Society of Chemistry, London, pp. 124-170. doi:10.1039/9781782624806-00124
-
(2015)
Poly(Lactic Acid) Science and Technology: Processing, Properties, Additives and Applications
, pp. 124-170
-
-
Ruellan, A.1
Ducruet, V.2
Domenek, S.3
-
54
-
-
79959857927
-
Research progress in toughening modification of poly(Lactic acid)
-
Liu HZ, Zhang JW (2011) Research progress in toughening modification of poly(lactic acid). J Polym Sci B Polym Phys 49(15):1051-1083. doi:10.1002/polb.22283
-
(2011)
J Polym Sci B Polym Phys
, vol.49
, Issue.15
, pp. 1051-1083
-
-
Liu, H.Z.1
Zhang, J.W.2
-
55
-
-
0042381402
-
Crystallization and phase separation in blends of high stereoregular poly(Lactide) with poly(ethylene glycol)
-
Hu Y, Hu YS, Topolkaraev V, Hiltner A, Baer E (2003) Crystallization and phase separation in blends of high stereoregular poly(lactide) with poly(ethylene glycol). Polymer 44: 5681-5689
-
(2003)
Polymer
, vol.44
, pp. 5681-5689
-
-
Hu, Y.1
Hu, Y.S.2
Topolkaraev, V.3
Hiltner, A.4
Baer, E.5
-
56
-
-
0031273348
-
Biodegradable polymer blends of poly(Lactic acid) and poly(ethylene glycol)
-
Sheth M, Kumar RA, Davé V, Gross RA, McCarthy SP (1997) Biodegradable polymer blends of poly(lactic acid) and poly(ethylene glycol). J Appl Polym Sci 66:1495-1505
-
(1997)
J Appl Polym Sci
, vol.66
, pp. 1495-1505
-
-
Sheth, M.1
Kumar, R.A.2
Davé, V.3
Gross, R.A.4
McCarthy, S.P.5
-
57
-
-
0032651787
-
Plasticizing polylactide—the effect of different plasticizers on the mechanical properties
-
Jacobsen S, Fritz HG (1999) Plasticizing polylactide—the effect of different plasticizers on the mechanical properties. Polym Eng Sci 39(7):1303-1310. doi:10.1002/pen.11517
-
(1999)
Polym Eng Sci
, vol.39
, Issue.7
, pp. 1303-1310
-
-
Jacobsen, S.1
Fritz, H.G.2
-
58
-
-
0035917761
-
Poly(Lactic acid): Plasticization and properties of biodegradable multiphase systems
-
Martin O, Averous L (2001) Poly(lactic acid): plasticization and properties of biodegradable multiphase systems. Polymer 42(14):6209-6219
-
(2001)
Polymer
, vol.42
, Issue.14
, pp. 6209-6219
-
-
Martin, O.1
Averous, L.2
-
59
-
-
0142027967
-
Thermal and mechanical properties of plasticized poly(L-lactic acid)
-
Baiardo M, Frisoni G, Scandola M, Rimelen M, Lips D, Ruffieux K, Wintermantel E (2003) Thermal and mechanical properties of plasticized poly(L-lactic acid). J Appl Polym Sci 90(7):1731-1738. doi:10.1002/app.12549
-
(2003)
J Appl Polym Sci
, vol.90
, Issue.7
, pp. 1731-1738
-
-
Baiardo, M.1
Frisoni, G.2
Scandola, M.3
Rimelen, M.4
Lips, D.5
Ruffieux, K.6
Wintermantel, E.7
-
60
-
-
33745055533
-
Thermo-mechanical characterization of plasticized PLA: Is the miscibility the only significant factor?
-
Pillin I, Montrelay N, Grohens Y (2006) Thermo-mechanical characterization of plasticized PLA: is the miscibility the only significant factor? Polymer 47(13):4676-4682
-
(2006)
Polymer
, vol.47
, Issue.13
, pp. 4676-4682
-
-
Pillin, I.1
Montrelay, N.2
Grohens, Y.3
-
61
-
-
84942294702
-
Solubility factors as screening tools of biodegradable toughening agents of polylactide
-
Ruellan A, Guinault A, Sollogoub C, Ducruet V, Domenek S (2015) Solubility factors as screening tools of biodegradable toughening agents of polylactide. J Appl Polym Sci 132: 42476. doi:10.1002/APP.42476
-
(2015)
J Appl Polym Sci
, vol.132
, pp. 42476
-
-
Ruellan, A.1
Guinault, A.2
Sollogoub, C.3
Ducruet, V.4
Domenek, S.5
-
62
-
-
0038673422
-
Film extrusion and film weldability of poly (Lactic acid) plasticized with triacetine and tributyl citrate
-
Ljungberg N, Andersson T, Wesslén B (2003) Film extrusion and film weldability of poly (lactic acid) plasticized with triacetine and tributyl citrate. J Appl Polym Sci 88:3239-3247
-
(2003)
J Appl Polym Sci
, vol.88
, pp. 3239-3247
-
-
Ljungberg, N.1
Ersson, T.2
Wesslén, B.3
-
63
-
-
0031273349
-
Citrate esters as plasticizers for poly(Lactic acid)
-
Labrecque LV, Kumar RA, Davé V, Gross RA, McCarthy SP (1997) Citrate esters as plasticizers for poly(lactic acid). J Appl Polym Sci 66:1507-1513
-
(1997)
J Appl Polym Sci
, vol.66
, pp. 1507-1513
-
-
Labrecque, L.V.1
Kumar, R.A.2
Davé, V.3
Gross, R.A.4
McCarthy, S.P.5
-
64
-
-
41949105418
-
Fabrication and characterization of poly(Lactic acid)/acetyl tributyl citrate/carbon black as conductive polymer composites
-
Yu J, Wang N, Ma X (2008) Fabrication and characterization of poly(lactic acid)/acetyl tributyl citrate/carbon black as conductive polymer composites. Biomacromolecules 9(3): 1050-1057
-
(2008)
Biomacromolecules
, vol.9
, Issue.3
, pp. 1050-1057
-
-
Yu, J.1
Wang, N.2
Ma, X.3
-
65
-
-
47149100163
-
Polylactide (PLA) designed with desired end-use properties: 1. PLA compositions with low molecular weight ester-like plasticizers and related performances
-
Murariu M, Ferreira ADS, Alexandre M, Dubois P (2008) Polylactide (PLA) designed with desired end-use properties: 1. PLA compositions with low molecular weight ester-like plasticizers and related performances. Polym Adv Technol 19:636-646
-
(2008)
Polym Adv Technol
, vol.19
, pp. 636-646
-
-
Murariu, M.1
Ferreira, A.2
Alexandre, M.3
Dubois, P.4
-
66
-
-
57849169339
-
Thermal, mechanical and rheological properties of poly (Lactic acid)/epoxidized soybean oil blends
-
Ali F, Chang Y-W, Kang SC, Yoon JY (2009) Thermal, mechanical and rheological properties of poly (lactic acid)/epoxidized soybean oil blends. Polym Bull 62(1):91-98. doi:10. 1007/s00289-008-1012-9
-
(2009)
Polym Bull
, vol.62
, Issue.1
, pp. 91-98
-
-
Ali, F.1
Chang, Y.-W.2
Kang, S.C.3
Yoon, J.Y.4
-
67
-
-
63849180235
-
Mechanical and rheological properties of epoxidized soybean oil plasticized poly(Lactic acid)
-
Xu YQ, Qu JP (2009) Mechanical and rheological properties of epoxidized soybean oil plasticized poly(lactic acid). J Appl Polym Sci 112(6):3185-3191. doi:10.1002/app.29797
-
(2009)
J Appl Polym Sci
, vol.112
, Issue.6
, pp. 3185-3191
-
-
Xu, Y.Q.1
Qu, J.P.2
-
68
-
-
84868223040
-
Preparation and characterization of poly(Lactic acid)/starch composites toughened with epoxidized soybean oil
-
Xiong Z, Yang Y, Feng J, Zhang X, Zhang C, Tang Z, Zhu J (2012) Preparation and characterization of poly(lactic acid)/starch composites toughened with epoxidized soybean oil. Carbohydr Polym 92(1):810-816. doi:10.1016/j.carbpol.2012.09.007
-
(2012)
Carbohydr Polym
, vol.92
, Issue.1
, pp. 810-816
-
-
Xiong, Z.1
Yang, Y.2
Feng, J.3
Zhang, X.4
Zhang, C.5
Tang, Z.6
Zhu, J.7
-
69
-
-
76649117724
-
Properties of epoxidized palm oil plasticized polytlactic acid
-
Al-Mulla EAJ, Yunus W, Ibrahim NAB, Ab Rahman MZ (2010) Properties of epoxidized palm oil plasticized polytlactic acid. J Mater Sci 45(7):1942-1946. doi:10.1007/s10853-009-4185-1
-
(2010)
J Mater Sci
, vol.45
, Issue.7
, pp. 1942-1946
-
-
Al-Mulla, E.1
Yunus, W.2
Ibrahim, N.3
Ab Rahman, M.Z.4
-
70
-
-
84868100923
-
Mechanical, thermal and morphological properties of poly(Lactic acid)/epoxidized palm olein blend
-
Silverajah VSG, Ibrahim NA, Zainuddin N, Yunus W, Abu Hassan H (2012) Mechanical, thermal and morphological properties of poly(lactic acid)/epoxidized palm olein blend. Molecules 17(10):11729-11747. doi:10.3390/molecules171011729
-
(2012)
Molecules
, vol.17
, Issue.10
, pp. 11729-11747
-
-
Silverajah, V.1
Ibrahim, N.A.2
Zainuddin, N.3
Yunus, W.4
Abu Hassan, H.5
-
71
-
-
84861672701
-
A comparative study on the mechanical, thermal and morphological characterization of poly(Lactic acid)/ epoxidized palm oil blend
-
Silverajah VSG, Ibrahim NA, Yunus W, Abu Hassan H, Woei CB (2012) A comparative study on the mechanical, thermal and morphological characterization of poly(lactic acid)/ epoxidized palm oil blend. Int J Mol Sci 13(5):5878-5898. doi:10.3390/ijms13055878
-
(2012)
Int J Mol Sci
, vol.13
, Issue.5
, pp. 5878-5898
-
-
Silverajah, V.1
Ibrahim, N.A.2
Yunus, W.3
Abu Hassan, H.4
Woei, C.B.5
-
73
-
-
84885445803
-
PLA/PHBV films with improved mechanical and gas barrier properties
-
Boufarguine M, Guinault A, Miquelard-Garnier G, Sollogoub C (2013) PLA/PHBV films with improved mechanical and gas barrier properties. Macromol Mater Eng 298(10): 1065-1073. doi:10.1002/mame.201200285
-
(2013)
Macromol Mater Eng
, vol.298
, Issue.10
, pp. 1065-1073
-
-
Boufarguine, M.1
Guinault, A.2
Miquelard-Garnier, G.3
Sollogoub, C.4
-
74
-
-
84937434223
-
Reactive extrustion of PLA-based materials: From synthesis to reactive melt-blending
-
The Royal Society of Chemistry, London
-
Raquez JM, Ramy-Ratiarison R, Murariu M, Dubois P (2015) Reactive extrustion of PLA-based materials: from synthesis to reactive melt-blending. In: Poly(lactic acid) science and technology: processing, properties, additives and applications. The Royal Society of Chemistry, London, pp. 101-123. doi:10.1039/9781782624806-00124
-
(2015)
Poly(Lactic Acid) Science and Technology: Processing, Properties, Additives and Applications
, pp. 101-123
-
-
Raquez, J.M.1
Ramy-Ratiarison, R.2
Murariu, M.3
Dubois, P.4
-
75
-
-
84855794247
-
New development on plasticized poly(Lactide): Chemical grafting of citrate on PLA by reactive extrusion
-
Hassouna F, Raquez J-M, Addiego F, Toniazzo V, Dubois P, Ruch D (2012) New development on plasticized poly(lactide): chemical grafting of citrate on PLA by reactive extrusion. Eur Polym J 48(2):404-415. doi:10.1016/j.eurpolymj.2011.12.001
-
(2012)
Eur Polym J
, vol.48
, Issue.2
, pp. 404-415
-
-
Hassouna, F.1
Raquez, J.-M.2
Addiego, F.3
Toniazzo, V.4
Dubois, P.5
Ruch, D.6
-
76
-
-
84971422227
-
Sustainable biobased blends from the reactive extrusion of polylactide and acrylonitrile butadiene styrene
-
Vadori R, Misra M, Mohanty AK (2016) Sustainable biobased blends from the reactive extrusion of polylactide and acrylonitrile butadiene styrene. J Appl Polym Sci 133(45):43771. doi:10.1002/app.43771
-
(2016)
J Appl Polym Sci
, vol.133
, Issue.45
, pp. 43771
-
-
Vadori, R.1
Misra, M.2
Mohanty, A.K.3
-
77
-
-
77955337661
-
Structure-properties of super-tough PLA alloy with excellent heat resistance
-
Hashima K, Nishitsuji S, Inoue T (2010) Structure-properties of super-tough PLA alloy with excellent heat resistance. Polymer 51(17):3934-3939. doi:10.1016/j.polymer.2010.06.045
-
(2010)
Polymer
, vol.51
, Issue.17
, pp. 3934-3939
-
-
Hashima, K.1
Nishitsuji, S.2
Inoue, T.3
-
78
-
-
84867801130
-
Thermal, mechanical and rheological properties of polylactide toughened by expoxidized natural rubber
-
Zhang C, Wang W, Huang Y, Pan Y, Jiang L, Dan Y, Luo Y, Peng Z (2013) Thermal, mechanical and rheological properties of polylactide toughened by expoxidized natural rubber. Mater Des 45:198-205. doi:10.1016/j.matdes.2012.09.024
-
(2013)
Mater Des
, vol.45
, pp. 198-205
-
-
Zhang, C.1
Wang, W.2
Huang, Y.3
Pan, Y.4
Jiang, L.5
Dan, Y.6
Luo, Y.7
Peng, Z.8
-
79
-
-
84956642083
-
Design of highly tough poly(L-lactide)-based ternary blends for automotive applications
-
Bouzouita A, Samuel C, Notta-Cuvier D, Odent J, Lauro F, Dubois P, Raquez JM (2016) Design of highly tough poly(l-lactide)-based ternary blends for automotive applications. J Appl Polym Sci 133(19):43402. doi:10.1002/app.43402
-
(2016)
J Appl Polym Sci
, vol.133
, Issue.19
, pp. 43402
-
-
Bouzouita, A.1
Samuel, C.2
Notta-Cuvier, D.3
Odent, J.4
Lauro, F.5
Dubois, P.6
Raquez, J.M.7
-
80
-
-
82455192722
-
Thermal, mechanical, and morphological properties of polylactic acid toughened with an impact modifier
-
Taib RM, Ghaleb ZA, Mohd Ishak ZA (2012) Thermal, mechanical, and morphological properties of polylactic acid toughened with an impact modifier. J Appl Polym Sci 123(5): 2715-2725. doi:10.1002/app.34884
-
(2012)
J Appl Polym Sci
, vol.123
, Issue.5
, pp. 2715-2725
-
-
Taib, R.M.1
Ghaleb, Z.A.2
Mohd Ishak, Z.A.3
-
81
-
-
70249150761
-
Plasticization of poly(Lactide) with blends of tributyl citrate and low molecular weight poly (D,L-lactide)-b-poly(ethylene glycol) copolymers
-
Lemmouchi Y, Murariu M, Dos Santos AM, Amass AJ, Schacht E, Dubois P (2009) Plasticization of poly(lactide) with blends of tributyl citrate and low molecular weight poly (D,L-lactide)-b-poly(ethylene glycol) copolymers. Eur Polym J 45(10):2839-2848. doi:10. 1016/j.eurpolymj.2009.07.006
-
(2009)
Eur Polym J
, vol.45
, Issue.10
, pp. 2839-2848
-
-
Lemmouchi, Y.1
Murariu, M.2
Dos Santos, A.M.3
Amass, A.J.4
Schacht, E.5
Dubois, P.6
-
82
-
-
0242460020
-
On the molecular mobility of gases
-
Graham T (1864) On the molecular mobility of gases. J Chem Soc London 17:334-339
-
(1864)
J Chem Soc London
, vol.17
, pp. 334-339
-
-
Graham, T.1
-
83
-
-
0000136704
-
Free volume theory
-
Neogi P (ed), Marcel Dekker, New York
-
Duda JL, Zielinski JM (1996) Free volume theory. In: Neogi P (ed) Diffusion in polymers, vol 32. Marcel Dekker, New York, pp. 143-171
-
(1996)
Diffusion in Polymers
, vol.32
, pp. 143-171
-
-
Duda, J.L.1
Zielinski, J.M.2
-
84
-
-
0002582987
-
Molecular simulations of sorption and diffusion in amorphous polymers
-
Neogi P (ed), Marcel Dekker, New York
-
Theodorou DN (1996) Molecular simulations of sorption and diffusion in amorphous polymers. In: Neogi P (ed) Diffusion in polymers, vol 32. Marcel Dekker, New York, pp. 67-142
-
(1996)
Diffusion in Polymers
, vol.32
, pp. 67-142
-
-
Theodorou, D.N.1
-
85
-
-
84875796409
-
Hopping of water in a glassy polymer studied via transition path sampling and likelihood maximization
-
Xi L, Shah M, Trout BL (2013) Hopping of water in a glassy polymer studied via transition path sampling and likelihood maximization. J Phys Chem B 117(13):3634-3647
-
(2013)
J Phys Chem B
, vol.117
, Issue.13
, pp. 3634-3647
-
-
Xi, L.1
Shah, M.2
Trout, B.L.3
-
86
-
-
56449104753
-
Biodegradable polymers for food packaging: A review
-
Siracusa V, Rocculi P, Romani S, Dalla Rosa M (2008) Biodegradable polymers for food packaging: a review. Trends Food Sci Technol 19(12):634-643. doi:10.1016/j.tifs.2008.07. 003
-
(2008)
Trends Food Sci Technol
, vol.19
, Issue.12
, pp. 634-643
-
-
Siracusa, V.1
Rocculi, P.2
Romani, S.3
Dalla Rosa, M.4
-
87
-
-
33846378917
-
Potential perspectives of bio-nanocomposites for food packaging applications
-
Sorrentino A, Gorrasi G, Vittoria V (2007) Potential perspectives of bio-nanocomposites for food packaging applications. Trends Food Sci Technol 18:84-95
-
(2007)
Trends Food Sci Technol
, vol.18
, pp. 84-95
-
-
Sorrentino, A.1
Gorrasi, G.2
Vittoria, V.3
-
88
-
-
84885021996
-
Bio-nanocomposites for food packaging applications
-
Rhim JW, Park HM, Ha CS (2013) Bio-nanocomposites for food packaging applications. Prog Polym Sci 38(10-11):1629-1652. doi:10.1016/j.progpolymsci.2013.05.008
-
(2013)
Prog Polym Sci
, vol.38
, Issue.10-11
, pp. 1629-1652
-
-
Rhim, J.W.1
Park, H.M.2
Ha, C.S.3
-
89
-
-
84885020514
-
Multifunctional nanostructured PLA materials for packaging and tissue engineering
-
Arrnentano I, Bitinis N, Fortunati E, Mattioli S, Rescignano N, Verdejo R, Lopez-Manchado MA, Kenny JM (2013) Multifunctional nanostructured PLA materials for packaging and tissue engineering. Prog Polym Sci 38(10-11):1720-1747. doi:10.1016/j.progpolymsci.2013. 05.010
-
(2013)
Prog Polym Sci
, vol.38
, Issue.10-11
, pp. 1720-1747
-
-
Arrnentano, I.1
Bitinis, N.2
Fortunati, E.3
Mattioli, S.4
Rescignano, N.5
Verdejo, R.6
Lopez-Manchado, M.A.7
Kenny, J.M.8
-
90
-
-
0141886022
-
Recent innovations in barrier technologies for plastic packaging—a review
-
Lange J, Wyser Y (2003) Recent innovations in barrier technologies for plastic packaging—a review. Packag Technol Sci 16(4):149-158. doi:10.1002/pts.621
-
(2003)
Packag Technol Sci
, vol.16
, Issue.4
, pp. 149-158
-
-
Lange, J.1
Wyser, Y.2
-
91
-
-
0001105616
-
Permeability and diffusion data
-
Brandrup J, Immergut EH, Grulke EA (eds), Wiley, New York
-
Pauly S (1999) Permeability and diffusion data. In: Brandrup J, Immergut EH, Grulke EA (eds) Polymer handbook, vol 2. Wiley, New York, pp. 543-569
-
(1999)
Polymer Handbook
, vol.2
, pp. 543-569
-
-
Pauly, S.1
-
92
-
-
84886352723
-
Characteristics and applications of PLA
-
Kalia S, Averous L, Wiley, Hoboken/Scrivener, Salem
-
Domenek S, Courgneau C, Ducruet V (2011) Characteristics and applications of PLA. In: Kalia S, Averous L (eds) Biopolymers: biomedical and environmental applications. Wiley, Hoboken/Scrivener, Salem, pp. 183-223
-
(2011)
Biopolymers: Biomedical and Environmental Applications
, pp. 183-223
-
-
Domenek, S.1
Courgneau, C.2
Ducruet, V.3
-
93
-
-
79951942776
-
Processing and shelf life issues of selected food packaging materials and structures from renewable resources
-
Mensitieri G, Di Maio E, Buonocore G, Nedi I, Oliviero M, Sansone L, Iannace S (2010) Processing and shelf life issues of selected food packaging materials and structures from renewable resources. Trends Food Sci Technol 22:72-80. doi:10.1016/j.tifs.2010.10.001
-
(2010)
Trends Food Sci Technol
, vol.22
, pp. 72-80
-
-
Mensitieri, G.1
Di Maio, E.2
Buonocore, G.3
Nedi, I.4
Oliviero, M.5
Sansone, L.6
Iannace, S.7
-
94
-
-
64249136674
-
Processing and characterization of poly(Lactic acid) films plasticized with commercial adipates
-
Martino VP, Jiménez A, Ruseckaite RA (2009) Processing and characterization of poly(lactic acid) films plasticized with commercial adipates. J Appl Polym Sci 112:2010-2018
-
(2009)
J Appl Polym Sci
, vol.112
, pp. 2010-2018
-
-
Martino, V.P.1
Jiménez, A.2
Ruseckaite, R.A.3
-
95
-
-
84895064435
-
An effect of lactic acid oligomers on the barrier properties of polylactide
-
Ambrosio-Martin J, Fabra MJ, Lopez-Rubio A, Lagaron JM (2014) An effect of lactic acid oligomers on the barrier properties of polylactide. J Mater Sci 49(8):2975-2986. doi:10.1007/ s10853-013-7929-x
-
(2014)
J Mater Sci
, vol.49
, Issue.8
, pp. 2975-2986
-
-
Ambrosio-Martin, J.1
Fabra, M.J.2
Lopez-Rubio, A.3
Lagaron, J.M.4
-
96
-
-
35548982560
-
Novel pet nanocomposites of interest in food packaging applications and comparative barrier performance with biopolyester nanocomposites
-
Sanchez-Garcia MD, Gimenez E, Lagaron JM (2007) Novel pet nanocomposites of interest in food packaging applications and comparative barrier performance with biopolyester nanocomposites. J Plast Film Sheet 23(2):133-148. doi:10.1177/8756087907083590
-
(2007)
J Plast Film Sheet
, vol.23
, Issue.2
, pp. 133-148
-
-
Sanchez-Garcia, M.D.1
Gimenez, E.2
Lagaron, J.M.3
-
97
-
-
84875216485
-
Plasma-polymer coatings onto different biodegradable polyesters surfaces
-
Belard L, Poncin-Epaillard F, Dole P, Averous L (2013) Plasma-polymer coatings onto different biodegradable polyesters surfaces. Eur Polym J 49(4):882-892. doi:10.1016/j. eurpolymj.2012.11.022
-
(2013)
Eur Polym J
, vol.49
, Issue.4
, pp. 882-892
-
-
Belard, L.1
Poncin-Epaillard, F.2
Dole, P.3
Averous, L.4
-
98
-
-
84902557372
-
Thermoplastic nanobiocomposites for rigid and flexible food packaging applications
-
Chiellini E, Woodhead Publishing, Cambridge
-
Lagaron JM, Sanchez G (2008) Thermoplastic nanobiocomposites for rigid and flexible food packaging applications. In: Chiellini E (ed) Environmentally compatible food packaging. Woodhead Publishing, Cambridge, pp. 62-89
-
(2008)
Environmentally Compatible Food Packaging
, pp. 62-89
-
-
Lagaron, J.M.1
Sanchez, G.2
-
99
-
-
84946073556
-
Thermal and barrier properties of stretched and annealed polylactide films
-
Dong T, Yu ZF, Wu JX, Zhao ZL, Yun XY, Wang Y, Jin Y, Yang JJ (2015) Thermal and barrier properties of stretched and annealed polylactide films. Polym Sci Ser A 57(6): 738-746. doi:10.1134/s0965545x15060073
-
(2015)
Polym Sci Ser A
, vol.57
, Issue.6
, pp. 738-746
-
-
Dong, T.1
Yu, Z.F.2
Wu, J.X.3
Zhao, Z.L.4
Yun, X.Y.5
Wang, Y.6
Jin, Y.7
Yang, J.J.8
-
100
-
-
77954531120
-
Barrier properties of poly(Lactic acid) and its morphological changes induced by aroma compound sorption
-
Colomines G, Ducruet V, Courgneau C, Guinault A, Domenek S (2010) Barrier properties of poly(lactic acid) and its morphological changes induced by aroma compound sorption. Polym Int 59(6):818-826. doi:10.1002/pi.2793
-
(2010)
Polym Int
, vol.59
, Issue.6
, pp. 818-826
-
-
Colomines, G.1
Ducruet, V.2
Courgneau, C.3
Guinault, A.4
Domenek, S.5
-
101
-
-
70350474667
-
Structure versus properties relationship of poly(Lactic acid). I. Effect of crystallinity on barrier properties
-
Drieskens M, Peeters R, Mullens J, Franco D, Lemstra PJ, Hristova-Bogaerds DG (2009) Structure versus properties relationship of poly(lactic acid). I. Effect of crystallinity on barrier properties. J Polym Sci B Polym Phys 47(22):2247-2258
-
(2009)
J Polym Sci B Polym Phys
, vol.47
, Issue.22
, pp. 2247-2258
-
-
Drieskens, M.1
Peeters, R.2
Mullens, J.3
Franco, D.4
Lemstra, P.J.5
Hristova-Bogaerds, D.G.6
-
102
-
-
84858439606
-
Impact of crystallinity of poly(Lactide) on helium and oxygen barrier properties
-
Guinault A, Sollogoub C, Ducruet V, Domenek S (2012) Impact of crystallinity of poly(lactide) on helium and oxygen barrier properties. Eur Polym J 48(4):779-788
-
(2012)
Eur Polym J
, vol.48
, Issue.4
, pp. 779-788
-
-
Guinault, A.1
Sollogoub, C.2
Ducruet, V.3
Domenek, S.4
-
103
-
-
78049241197
-
Gas transport properties and crystalline structure of poly(Lactic acid) membranes
-
Sawada H, Takahashi Y, Miyata S, Kanehashi S, Sato S, Nagai K (2010) Gas transport properties and crystalline structure of poly(lactic acid) membranes. Trans Mater Res Soc Jpn 35:241-246
-
(2010)
Trans Mater Res Soc Jpn
, vol.35
, pp. 241-246
-
-
Sawada, H.1
Takahashi, Y.2
Miyata, S.3
Kanehashi, S.4
Sato, S.5
Nagai, K.6
-
104
-
-
78049232703
-
Analysis of permeability; solubility and diffusivity of carbon dioxide; oxygen; and nitrogen in crystalline and liquid crystalline polymers
-
Kanehashi S, Kusakabe A, Sato S, Nagai K (2010) Analysis of permeability; solubility and diffusivity of carbon dioxide; oxygen; and nitrogen in crystalline and liquid crystalline polymers. J Membr Sci 365(1-2):40-51. doi:10.1016/j.memsci.2010.08.035
-
(2010)
J Membr Sci
, vol.365
, Issue.1-2
, pp. 40-51
-
-
Kanehashi, S.1
Kusakabe, A.2
Sato, S.3
Nagai, K.4
-
105
-
-
84898622786
-
Significantly improving oxygen barrier properties of polylactide via constructing parallel-aligned Shish-Kebab-like crystals with well-interlocked boundaries
-
Bai HW, Huang CM, Xiu H, Zhang Q, Deng H, Wang K, Chen F, Fu Q (2014) Significantly improving oxygen barrier properties of polylactide via constructing parallel-aligned Shish-Kebab-like crystals with well-interlocked boundaries. Biomacromolecules 15(4):1507-1514. doi:10.1021/bm500167u
-
(2014)
Biomacromolecules
, vol.15
, Issue.4
, pp. 1507-1514
-
-
Bai, H.W.1
Huang, C.M.2
Xiu, H.3
Zhang, Q.4
Deng, H.5
Wang, K.6
Chen, F.7
Fu, Q.8
-
106
-
-
78651412809
-
Study of the thermal stabilization mechanism of biodegradable poly(L-lactide)/silica nanocomposites
-
Wen X, Zhang KY, Wang Y, Han LJ, Han CY, Zhang HL, Chen S, Dong LS (2011) Study of the thermal stabilization mechanism of biodegradable poly(L-lactide)/silica nanocomposites. Polym Int 60(2):202-210. doi:10.1002/pi.2927
-
(2011)
Polym Int
, vol.60
, Issue.2
, pp. 202-210
-
-
Wen, X.1
Zhang, K.Y.2
Wang, Y.3
Han, L.J.4
Han, C.Y.5
Zhang, H.L.6
Chen, S.7
Dong, L.S.8
-
107
-
-
79958056032
-
Effect of an organo-modified montmorillonite on PLA crystallization and gas barrier properties
-
Picard E, Espuche E, Fulchiron R (2011) Effect of an organo-modified montmorillonite on PLA crystallization and gas barrier properties. Appl Clay Sci 53(1):58-65. doi:10.1016/j. clay.2011.04.023
-
(2011)
Appl Clay Sci
, vol.53
, Issue.1
, pp. 58-65
-
-
Picard, E.1
Espuche, E.2
Fulchiron, R.3
-
108
-
-
35348962571
-
Effect of nucleation and plasticization on the crystallization of poly(Lactic acid)
-
Li H, Huneault MA (2007) Effect of nucleation and plasticization on the crystallization of poly(lactic acid). Polymer 48:6855-6866
-
(2007)
Polymer
, vol.48
, pp. 6855-6866
-
-
Li, H.1
Huneault, M.A.2
-
109
-
-
0028972331
-
The solution-diffusion model: A review
-
Wijmans JG, Baker RW (1995) The solution-diffusion model: a review. J Membr Sci 107(1-2):1-21
-
(1995)
J Membr Sci
, vol.107
, Issue.1-2
, pp. 1-21
-
-
Wijmans, J.G.1
Baker, R.W.2
-
110
-
-
61349124919
-
Permeability of polymer/clay nanocomposites: A review
-
Choudalakis G, Gotsis AD (2009) Permeability of polymer/clay nanocomposites: A review. Eur Polym J 45(4):967-984. doi:10.1016/j.eurpolymj.2009.01.027
-
(2009)
Eur Polym J
, vol.45
, Issue.4
, pp. 967-984
-
-
Choudalakis, G.1
Gotsis, A.D.2
-
111
-
-
0037032736
-
New nanocomposite materials based on plasticized poly(L-lactide) and organo-modified montmorillonites: Thermal and morphological study
-
Paul MA, Alexandre M, Degee P, Henrist C, Rulmont A, Dubois P (2003) New nanocomposite materials based on plasticized poly(L-lactide) and organo-modified montmorillonites: thermal and morphological study. Polymer 44(2):443-450. doi:10.1016/s0032-3861(02)00778-4
-
(2003)
Polymer
, vol.44
, Issue.2
, pp. 443-450
-
-
Paul, M.A.1
Alexandre, M.2
Degee, P.3
Henrist, C.4
Rulmont, A.5
Dubois, P.6
-
112
-
-
0036461139
-
Poly(Lactic acid) nanocomposites with various organoclays. I. Thermomechanical properties, morphology, and gas permeability
-
Chang J-H, An YU, Sur GS (2003) Poly(lactic acid) nanocomposites with various organoclays. I. Thermomechanical properties, morphology, and gas permeability. J Polym Sci B Polym Phys 41(1):94-103
-
(2003)
J Polym Sci B Polym Phys
, vol.41
, Issue.1
, pp. 94-103
-
-
Chang, J.-H.1
An, Y.U.2
Sur, G.S.3
-
113
-
-
0242668762
-
New polylactide/layered silicate nanocomposites. III. High-performance biodegradable materials
-
Sinha Ray S, Yamada K, Okamoto M, Ogami A, Ueda K (2003) New polylactide/layered silicate nanocomposites. III. High-performance biodegradable materials. Chem Mater 15(7): 1456-1465
-
(2003)
Chem Mater
, vol.15
, Issue.7
, pp. 1456-1465
-
-
Sinha Ray, S.1
Yamada, K.2
Okamoto, M.3
Ogami, A.4
Ueda, K.5
-
114
-
-
51249096958
-
Permeability of polylactide nanocomposite films for water vapour, oxygen and carbon dioxide
-
Zenkiewicz M, Richert J (2008) Permeability of polylactide nanocomposite films for water vapour, oxygen and carbon dioxide. Polym Test 27:835-840
-
(2008)
Polym Test
, vol.27
, pp. 835-840
-
-
Zenkiewicz, M.1
Richert, J.2
-
115
-
-
84953265692
-
Effects of clay platelets and natural nanotubes on mechanical properties and gas permeability of poly (Lactic acid) nanocomposites
-
Guo YC, Yang K, Zuo XH, Xue Y, Marmorat C, Liu Y, Chang CC, Rafailovich MH (2016) Effects of clay platelets and natural nanotubes on mechanical properties and gas permeability of poly (lactic acid) nanocomposites. Polymer 83:246-259. doi:10.1016/j.polymer.2015.12. 012
-
(2016)
Polymer
, vol.83
, pp. 246-259
-
-
Guo, Y.C.1
Yang, K.2
Zuo, X.H.3
Xue, Y.4
Marmorat, C.5
Liu, Y.6
Chang, C.C.7
Rafailovich, M.H.8
-
116
-
-
84925624462
-
Evaluation of crystallinity and gas barrier properties of films obtained from PLA nanocomposites synthesized via “in situ” polymerization of L-lactide with silane-modified nanosilica and montmorillonite
-
Ortenzi MA, Basilissi L, Farina H, Di Silvestro G, Piergiovanni L, Mascheroni E (2015) Evaluation of crystallinity and gas barrier properties of films obtained from PLA nanocomposites synthesized via “in situ” polymerization of L-lactide with silane-modified nanosilica and montmorillonite. Eur Polym J 66:478-491. doi:10.1016/j.eurpolymj.2015. 03.006
-
(2015)
Eur Polym J
, vol.66
, pp. 478-491
-
-
Ortenzi, M.A.1
Basilissi, L.2
Farina, H.3
Di Silvestro, G.4
Piergiovanni, L.5
Mascheroni, E.6
-
117
-
-
84944179338
-
Synergistic effect of lactic acid oligomers and laminar graphene sheets on the barrier properties of polylactide nanocomposites obtained by the in situ polymerization pre-incorporation method
-
Ambrosio-Martin J, Lopez-Rubio A, Fabra MJ, Lopez-Manchado MA, Sorrentino A, Gorrasi G, Lagaron JM (2016) Synergistic effect of lactic acid oligomers and laminar graphene sheets on the barrier properties of polylactide nanocomposites obtained by the in situ polymerization pre-incorporation method. J Appl Polym Sci 133(2). doi:10.1002/app.42661
-
(2016)
J Appl Polym Sci
, vol.133
, Issue.2
-
-
Ambrosio-Martin, J.1
Lopez-Rubio, A.2
Fabra, M.J.3
Lopez-Manchado, M.A.4
Sorrentino, A.5
Gorrasi, G.6
Lagaron, J.M.7
-
118
-
-
84871347311
-
Effect of incorporation of graphene oxide and graphene nanoplatelets on mechanical and gas permeability properties of poly(Lactic acid) films
-
Pinto AM, Cabral J, Pacheco Tanaka DA, Mendes AM, Magalhaes FD (2013) Effect of incorporation of graphene oxide and graphene nanoplatelets on mechanical and gas permeability properties of poly(lactic acid) films. Polym Int 62(1):33-40. doi:10.1002/pi.4290
-
(2013)
Polym Int
, vol.62
, Issue.1
, pp. 33-40
-
-
Pinto, A.M.1
Cabral, J.2
Pacheco Tanaka, D.A.3
Mendes, A.M.4
Magalhaes, F.D.5
-
119
-
-
84976240521
-
PLA/functionalized-gum arabic based bionanocomposite films for high gas barrier applications
-
Tripathi N, Katiyar V (2016) PLA/functionalized-gum arabic based bionanocomposite films for high gas barrier applications. J Appl Polym Sci 133(21):43458. doi:10.1002/app.43458
-
(2016)
J Appl Polym Sci
, vol.133
, Issue.21
, pp. 43458
-
-
Tripathi, N.1
Katiyar, V.2
-
120
-
-
16344384008
-
Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field
-
Azizi S, My AS, Alloin F, Dufresne A (2005) Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field. Biomacromolecules 6(2):612-626
-
(2005)
Biomacromolecules
, vol.6
, Issue.2
, pp. 612-626
-
-
Azizi, S.1
My, A.S.2
Alloin, F.3
Dufresne, A.4
-
121
-
-
84883871662
-
Influence of chemical surface modification of cellulose nanowhiskers on thermal, mechanical, and barrier properties of poly(Lactide) based bionanocomposites
-
Espino-Perez E, Bras J, Ducruet V, Guinault A, Dufresne A, Domenek S (2013) Influence of chemical surface modification of cellulose nanowhiskers on thermal, mechanical, and barrier properties of poly(lactide) based bionanocomposites. Eur Polym J 49(10):3144-3154. doi:10. 1016/j.eurpolymj.2013.07.017
-
(2013)
Eur Polym J
, vol.49
, Issue.10
, pp. 3144-3154
-
-
Espino-Perez, E.1
Bras, J.2
Ducruet, V.3
Guinault, A.4
Dufresne, A.5
Domenek, S.6
-
122
-
-
84916620535
-
Green process for chemical functionalization of nanocellulose with carboxylic acids
-
Espino-Perez E, Domenek S, Belgacem N, Sillard C, Bras J (2014) Green process for chemical functionalization of nanocellulose with carboxylic acids. Biomacromolecules 15(12): 5441-4560. doi:10.1021/bm5013458
-
(2014)
Biomacromolecules
, vol.15
, Issue.12
, pp. 5441-14560
-
-
Espino-Perez, E.1
Domenek, S.2
Belgacem, N.3
Sillard, C.4
Bras, J.5
-
123
-
-
84941671071
-
Nanocomposites with functionalised polysaccharide nanocrystals through aqueous free radical polymerisation promoted by ozonolysis
-
Espino-Perez E, Gilbert RG, Domenek S, Brochier-Salon MC, Belgacem MN, Bras J (2016) Nanocomposites with functionalised polysaccharide nanocrystals through aqueous free radical polymerisation promoted by ozonolysis. Carbohydr Polym 135:256-266. doi:10.1016/j. carbpol.2015.09.005
-
(2016)
Carbohydr Polym
, vol.135
, pp. 256-266
-
-
Espino-Perez, E.1
Gilbert, R.G.2
Domenek, S.3
Brochier-Salon, M.C.4
Belgacem, M.N.5
Bras, J.6
-
124
-
-
77956880036
-
On the use of plant cellulose nanowhiskers to enhance the barrier properties of polylactic acid
-
Sanchez-Garcia M, Lagaron J (2010) On the use of plant cellulose nanowhiskers to enhance the barrier properties of polylactic acid. Cellulose 17(5):987-1004
-
(2010)
Cellulose
, vol.17
, Issue.5
, pp. 987-1004
-
-
Sanchez-Garcia, M.1
Lagaron, J.2
-
125
-
-
36149000955
-
Morphology and barrier properties of solvent cast composites of thermoplastic biopolymers and purified cellulose fibers
-
Sanchez-Garcia MD, Gimenez E, Lagaron JM (2008) Morphology and barrier properties of solvent cast composites of thermoplastic biopolymers and purified cellulose fibers. Carbohydr Polym 71(2):235-244. doi:10.1016/j.carbpol.2007.05.041
-
(2008)
Carbohydr Polym
, vol.71
, Issue.2
, pp. 235-244
-
-
Sanchez-Garcia, M.D.1
Gimenez, E.2
Lagaron, J.M.3
-
126
-
-
58549089523
-
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
-
Fukuzumi H, Saito T, Wata T, Kumamoto Y, Isogai A (2009) Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation. Biomacromolecules 10(1):162-165. doi:10.1021/bm801065u
-
(2009)
Biomacromolecules
, vol.10
, Issue.1
, pp. 162-165
-
-
Fukuzumi, H.1
Saito, T.2
Wata, T.3
Kumamoto, Y.4
Isogai, A.5
-
127
-
-
77956451538
-
Three-layer sheets based on gelatin and poly(Lactic acid), part 1: Preparation and properties
-
Martucci JF, Ruseckaite RA (2010) Three-layer sheets based on gelatin and poly(lactic acid), part 1: preparation and properties. J Appl Polym Sci 118(5):3102-3110. doi:10.1002/app. 32751
-
(2010)
J Appl Polym Sci
, vol.118
, Issue.5
, pp. 3102-3110
-
-
Martucci, J.F.1
Ruseckaite, R.A.2
-
128
-
-
84856875476
-
Transparent films based on PLA and montmorillonite with tunable oxygen barrier properties
-
Svagan AJ, Akesson A, Cardenas M, Bulut S, Knudsen JC, Risbo J, Plackett D (2012) Transparent films based on PLA and montmorillonite with tunable oxygen barrier properties. Biomacromolecules 13(2):397-405. doi:10.1021/bm201438m
-
(2012)
Biomacromolecules
, vol.13
, Issue.2
, pp. 397-405
-
-
Svagan, A.J.1
Akesson, A.2
Cardenas, M.3
Bulut, S.4
Knudsen, J.C.5
Risbo, J.6
Plackett, D.7
-
129
-
-
30744435601
-
Forced assembly of polymer nanolayers thinner than the interphase
-
Liu RYF, Ranade AP, Wang HP, Bernal-Lara TE, Hiltner A, Baer E (2005) Forced assembly of polymer nanolayers thinner than the interphase. Macromolecules 38(26):10721-10727. doi:10.1021/ma051649x
-
(2005)
Macromolecules
, vol.38
, Issue.26
, pp. 10721-10727
-
-
Liu, R.1
Ranade, A.P.2
Wang, H.P.3
Bernal-Lara, T.E.4
Hiltner, A.5
Baer, E.6
-
130
-
-
33847735444
-
Gas solubility of carbon dioxide in poly(Lactic acid) at high pressures: Thermal treatment effect
-
Oliveira NS, Dorgan J, Coutinho JAP, Ferreira A, Daridon JL, Marrucho IM (2007) Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: thermal treatment effect. J Polym Sci B Polym Phys 45(5):616-625
-
(2007)
J Polym Sci B Polym Phys
, vol.45
, Issue.5
, pp. 616-625
-
-
Oliveira, N.S.1
Dorgan, J.2
Coutinho, J.3
Ferreira, A.4
Daridon, J.L.5
Marrucho, I.M.6
-
131
-
-
33750002490
-
Gas permeation properties of poly(Lactic acid) revisited
-
Bao L, Dorgan JR, Knauss D, Hait S, Oliveira NS, Maruccho IM (2006) Gas permeation properties of poly(lactic acid) revisited. J Membr Sci 285(1-2):166-172. doi:10.1016/j. memsci.2006.08.021
-
(2006)
J Membr Sci
, vol.285
, Issue.1-2
, pp. 166-172
-
-
Bao, L.1
Dorgan, J.R.2
Knauss, D.3
Hait, S.4
Oliveira, N.S.5
Maruccho, I.M.6
-
132
-
-
70449486122
-
Polylactides: Properties and prospects of an environmentally benign plastic from renewable resources
-
Dorgan JR, Lehermeier HJ, Palade L-I, Cicero J (2001) Polylactides: properties and prospects of an environmentally benign plastic from renewable resources. Macromol Symp 175:55-66
-
(2001)
Macromol Symp
, vol.175
, pp. 55-66
-
-
Dorgan, J.R.1
Lehermeier, H.J.2
Palade, L.-I.3
Cicero, J.4
-
133
-
-
0035885494
-
Gas permeation properties of poly(Lactic acid)
-
Lehermeier HJ, Dorgan JR, Way JD (2001) Gas permeation properties of poly(lactic acid). J Membr Sci 190:243-251
-
(2001)
J Membr Sci
, vol.190
, pp. 243-251
-
-
Lehermeier, H.J.1
Dorgan, J.R.2
Way, J.D.3
-
134
-
-
55049141883
-
Characterization and gas transport properties of poly(Lactic acid) blend membranes
-
Komatsuka T, Kusakabe A, Nagai K (2008) Characterization and gas transport properties of poly(lactic acid) blend membranes. Desalination 234(1-3):212-220
-
(2008)
Desalination
, vol.234
, Issue.1-3
, pp. 212-220
-
-
Komatsuka, T.1
Kusakabe, A.2
Nagai, K.3
-
135
-
-
84901203081
-
Correlation between interlamellar amorphous structure and gas permeability in poly(Lactic acid) films
-
Sato S, Nyuui T, Matsuba G, Nagai K (2014) Correlation between interlamellar amorphous structure and gas permeability in poly(lactic acid) films. J Appl Polym Sci 131(16):40626. doi:10.1002/app.40626
-
(2014)
J Appl Polym Sci
, vol.131
, Issue.16
, pp. 40626
-
-
Sato, S.1
Nyuui, T.2
Matsuba, G.3
Nagai, K.4
-
136
-
-
0031126418
-
Water vapor permeability of biodegradable polymers
-
Shogren R (1997) Water vapor permeability of biodegradable polymers. J Polym Environ 5(2):91-95
-
(1997)
J Polym Environ
, vol.5
, Issue.2
, pp. 91-95
-
-
Shogren, R.1
-
137
-
-
0031194879
-
Water transport in polylactic acid (PLA), PLA/polycaprolactone copolymers, and PLA/polyethylene glycol blends
-
Siparsky G, Voorhees K, Dorgan J, Schilling K (1997) Water transport in polylactic acid (PLA), PLA/polycaprolactone copolymers, and PLA/polyethylene glycol blends. J Polym Environ 5(3):125-136
-
(1997)
J Polym Environ
, vol.5
, Issue.3
, pp. 125-136
-
-
Siparsky, G.1
Voorhees, K.2
Dorgan, J.3
Schilling, K.4
-
138
-
-
33645370775
-
The stability of poly(Lactic acid) packaging films as influenced by humidity and temperature
-
Holm VK, Ndoni S, Risbo J (2006) The stability of poly(lactic acid) packaging films as influenced by humidity and temperature. J Food Sci 71:E40-E44
-
(2006)
J Food Sci
, vol.71
, pp. E40-E44
-
-
Holm, V.K.1
Ndoni, S.2
Risbo, J.3
-
139
-
-
33644507437
-
Water vapor permeability of poly(Lactide)s: Effects of molecular characteristics and cristallinity
-
Tsuji H, Okino R, Daimon H, Fujie K (2006) Water vapor permeability of poly(lactide)s: effects of molecular characteristics and cristallinity. J Appl Polym Sci 99:2245-2252
-
(2006)
J Appl Polym Sci
, vol.99
, pp. 2245-2252
-
-
Tsuji, H.1
Okino, R.2
Daimon, H.3
Fujie, K.4
-
140
-
-
4744360239
-
An overview of polylactides as packaging materials
-
Auras R, Harte B, Selke S (2004) An overview of polylactides as packaging materials. Macromol Biosci 4:835-864
-
(2004)
Macromol Biosci
, vol.4
, pp. 835-864
-
-
Auras, R.1
Harte, B.2
Selke, S.3
-
141
-
-
0037432869
-
Enhanced thermal stability of poly(Lactide)s in the melt by enantiomeric polymer blending
-
Tsuji H, Fukui I (2003) Enhanced thermal stability of poly(lactide)s in the melt by enantiomeric polymer blending. Polymer 44(10):2891-2896. doi:10.1016/s0032-3861(03)00175-7
-
(2003)
Polymer
, vol.44
, Issue.10
, pp. 2891-2896
-
-
Tsuji, H.1
Fukui, I.2
-
142
-
-
84879876754
-
Non-Fickian diffusion of water in polylactide
-
Davis EM, Minelli M, Baschetti MG, Elabd YA (2013) Non-Fickian diffusion of water in polylactide. Ind Eng Chem Res 52(26):8664-8673. doi:10.1021/ie302342m
-
(2013)
Ind Eng Chem Res
, vol.52
, Issue.26
, pp. 8664-8673
-
-
Davis, E.M.1
Minelli, M.2
Baschetti, M.G.3
Elabd, Y.A.4
-
143
-
-
55549098516
-
Tensile, water vapor barrier and antimicrobial properties of PLA/nanoclay composite films
-
Rhim J-W, Hong S-I, Ha C-S (2009) Tensile, water vapor barrier and antimicrobial properties of PLA/nanoclay composite films. LWT Food Sci Technol 42(2):612-617
-
(2009)
LWT Food Sci Technol
, vol.42
, Issue.2
, pp. 612-617
-
-
Rhim, J.-W.1
Hong, S.-I.2
Ha, C.-S.3
-
144
-
-
84905915911
-
Structural dependence of the molecular mobility in the amorphous fractions of polylactide
-
Delpouve N, Delbreilh L, Stoclet G, Saiter A, Dargent E (2014) Structural dependence of the molecular mobility in the amorphous fractions of polylactide. Macromolecules 47(15): 5186-5197. doi:10.1021/ma500839p
-
(2014)
Macromolecules
, vol.47
, Issue.15
, pp. 5186-5197
-
-
Delpouve, N.1
Delbreilh, L.2
Stoclet, G.3
Saiter, A.4
Dargent, E.5
-
145
-
-
77955723594
-
Water vapor permeability of poly(L-lactide)/poly(D-lactide) stereocomplexes
-
Tsuji H, Tsuruno T (2010) Water vapor permeability of poly(L-lactide)/poly(D-lactide) stereocomplexes. Macromol Mater Eng 295(8):709-715. doi:10.1002/mame.201000071
-
(2010)
Macromol Mater Eng
, vol.295
, Issue.8
, pp. 709-715
-
-
Tsuji, H.1
Tsuruno, T.2
-
146
-
-
84955197212
-
Biodegradable poly(Lactic-acid)/poly (trimethylene-carbonate)/laponite composite film: Development and application to the packaging of mushrooms (Agaricus bisporus)
-
Liu D, Li HL, Zhou GX, Yuan ML, Qin YY (2015) Biodegradable poly(lactic-acid)/poly (trimethylene-carbonate)/laponite composite film: development and application to the packaging of mushrooms (Agaricus bisporus). Polym Adv Technol 26(12):1600-1607. doi:10. 1002/pat.3587
-
(2015)
Polym Adv Technol
, vol.26
, Issue.12
, pp. 1600-1607
-
-
Liu, D.1
Li, H.L.2
Zhou, G.X.3
Yuan, M.L.4
Qin, Y.Y.5
-
147
-
-
84928570236
-
Reducing water vapor permeability of poly(Lactic acid) film and bottle through layer-by-layer deposition of green-processed cellulose nanocrystals and chitosan
-
Halasz K, Hosakun Y, Csoka L (2015) Reducing water vapor permeability of poly(lactic acid) film and bottle through layer-by-layer deposition of green-processed cellulose nanocrystals and chitosan. Int J Polym Sci 2015:1-6. doi:10.1155/2015/954290
-
(2015)
Int J Polym Sci
, vol.2015
, pp. 1-6
-
-
Halasz, K.1
Hosakun, Y.2
Csoka, L.3
-
148
-
-
32944461943
-
Sorption of ethyl acetate and d-limonene in poly(Lactide) polymers
-
Auras R, Harte B, Selke S (2006) Sorption of ethyl acetate and d-limonene in poly(lactide) polymers. J Sci Food Agric 86(4):648-656
-
(2006)
J Sci Food Agric
, vol.86
, Issue.4
, pp. 648-656
-
-
Auras, R.1
Harte, B.2
Selke, S.3
-
149
-
-
1542751994
-
Quality changes in orange juice packed in materials based on polylactate
-
Haugaard V, Weber C, Danielsen B, Bertelsen G (2002) Quality changes in orange juice packed in materials based on polylactate. Eur Food Res Technol 214(5):423-428
-
(2002)
Eur Food Res Technol
, vol.214
, Issue.5
, pp. 423-428
-
-
Haugaard, V.1
Weber, C.2
Danielsen, B.3
Bertelsen, G.4
-
150
-
-
77956610612
-
Scalping of four aroma compounds by one common (LDPE) and one biosourced (PLA) packaging materials during high pressure treatments
-
Mauricio-Iglesias M, Peyron S, Chalier P, Gontard N (2011) Scalping of four aroma compounds by one common (LDPE) and one biosourced (PLA) packaging materials during high pressure treatments. J Food Eng 10:9-15
-
(2011)
J Food Eng
, vol.10
, pp. 9-15
-
-
Mauricio-Iglesias, M.1
Peyron, S.2
Chalier, P.3
Gontard, N.4
-
151
-
-
84865630584
-
Plasticization of poly(Lactide) by sorption of volatile organic compounds at low concentration
-
Salazar R, Domenek S, Courgneau C, Ducruet V (2012) Plasticization of poly(lactide) by sorption of volatile organic compounds at low concentration. Polym Degrad Stab 97(10): 1871-1880
-
(2012)
Polym Degrad Stab
, vol.97
, Issue.10
, pp. 1871-1880
-
-
Salazar, R.1
Domenek, S.2
Courgneau, C.3
Ducruet, V.4
-
152
-
-
84886737448
-
Interactions of flavoured oil in-water emulsions with polylactide
-
Salazar R, Domenek S, Ducruet V (2014) Interactions of flavoured oil in-water emulsions with polylactide. Food Chem 148:138-146
-
(2014)
Food Chem
, vol.148
, pp. 138-146
-
-
Salazar, R.1
Domenek, S.2
Ducruet, V.3
-
153
-
-
84865623739
-
Chemistry and thermodynamics properties of lactic acid and lactide and solvent miscibility
-
Auras R, Lim LT, Selke S, Tsuji H, Wiley, Hoboken
-
Jin Z, Tian Y, Wang Y (2010) Chemistry and thermodynamics properties of lactic acid and lactide and solvent miscibility. In: Auras R, Lim LT, Selke S, Tsuji H (eds) Poly(lactic acid): synthesis, structures, properties, processing, and applications. Wiley, Hoboken, pp. 19-25
-
(2010)
Poly(Lactic Acid): Synthesis, Structures, Properties, Processing, and Applications
, pp. 19-25
-
-
Jin, Z.1
Tian, Y.2
Wang, Y.3
-
154
-
-
84901192863
-
Mechanical response of poly(Lactic acid)-based packaging under liquid exposure
-
Widiastuti I, Sbarski I, Masood SH (2014) Mechanical response of poly(lactic acid)-based packaging under liquid exposure. J Appl Polym Sci 131(16):40600. doi:10.1002/app.40600
-
(2014)
J Appl Polym Sci
, vol.131
, Issue.16
, pp. 40600
-
-
Widiastuti, I.1
Sbarski, I.2
Masood, S.H.3
|