A short review on basalt fiber reinforced polymer composites

Composites Part B: Engineering

Volumn 73, Issue , 2015, Pages 166-180

  Dhand, Vivek ^a   Mittal, Garima ^a   Rhee, Kyong Yop ^a   Park, Soo Jin ^b   Hui, David ^c  

^a Kyung Hee University   (South Korea)

^b Inha University   (South Korea)

^c UNO College of Engineering   (United States)

Author keywords

A. Fibers; A. Polymer (textile) fiber; B. Mechanical properties; B. Thermal properties; Basalt

Indexed keywords

BASALT; BIODEGRADATION; COMPOSITE MATERIALS; COST EFFECTIVENESS; FIBER REINFORCED PLASTICS; GLASS FIBERS; MECHANICAL PROPERTIES; NATURAL FIBERS; POLYMERS; REINFORCEMENT;

BASALT FIBER; CHEMICAL RESISTANT; ECO-FRIENDLY; LOW COSTS; PHYSICOCHEMICAL PROPERTY; POLYMER COMPOSITE; POLYMER(TEXTILE) FIBER; REINFORCEMENT MATERIALS;

FIBERS;

BASALT; BIODEGRADABILITY; COMPOSITES; GLASS FIBERS; REINFORCED PLASTIC; TEXTILE FIBERS; THERMAL PROPERTIES;

EID: 85027947092     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2014.12.011     Document Type: Article

References (178)

1. A. Ross Basalt fibers: alternative to glass Compos Technol 12 2006 44 48
2. C. Colombo, L. Vergani, and M. Burman Static and fatigue characterisation of new basalt fibre reinforced composites Compos Struct 94 3 2012 1165 1174
3. D. Pavlovski, B. Mislavsky, and A. Antonov CNG cylinder manufacturers test basalt fibre Reinf Plast 51 4 2007 36 37
4. M.T. Dehkordi, H. Nosraty, M.M. Shokrieh, G. Minak, and D. Ghelli The influence of hybridization on impact damage behavior and residual compression strength of intraply basalt/nylon hybrid composites Mater Des 43 2013 283 290
5. I.D.G. Ary Subagia, Y. Kim, L.D. Tijing, C.S. Kim, and H.K. Shon Effect of stacking sequence on the flexural properties of hybrid composites reinforced with carbon and basalt fibers Compos Part B - Eng 58 2014 251 258
6. M.T. Dehkordi, H. Nosraty, M.M. Shokrieh, G. Minak, and D. Ghelli Low velocity impact properties of intra-ply hybrid composites based on basalt and nylon woven fabrics Mater Des 31 8 2010 3835 3844
7. S.H. Han, H.J. Oh, H.C. Lee, and S.S. Su The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites Compos Part B - Eng 45 1 2012 172 177
8. J.M.F.D. Paivaa, A.D.N.D. Santos, and M.C. Rezende Mechanical and morphological characterizations of carbon fiber fabric reinforced epoxy composites used in aeronautical field Mater Res 12 3 2009 367 374
9. I. Taketa, J. Ustarroz, L. Gorbatikh, S.V. Lomov, and I. Verpoest Interply hybrid composites with carbon fiber reinforced polypropylene and self-reinforced polypropylene Compos Part A - Appl Sci 41 8 2010 927 932
10. L. Hollaway Polymer composites for civil and structural engineering 1993 Springer New York
11. P.D.L.R. García, A.C. Escamilla, and M.N.G. García Bending reinforcement of timber beams with composite carbon fiber and basalt fiber materials Compos Part B - Eng 55 2013 528 536
12. R. Park, and J. Jang Performance improvement of carbon fiber polyethylene fiber hybrid composites J Mater Sci 34 12 1999 2903 2910
13. V. Lopresto, C. Leone, and I.D. Iorio Mechanical characterisation of basalt fibre reinforced plastic Compos Part B - Eng 42 4 2011 717 723
14. B. Wei, H.L. Cao, and S.H. Song Degradation of basalt fibre and glass fibre/epoxy resin composites in seawater Corros Sci 53 1 2011 426 431
15. X. Wang, Z. Wu, G. Wu, H. Zhu, and F. Zen Enhancement of basalt FRP by hybridization for long-span cable-stayed bridge Compos Part B - Eng 44 1 2013 184 192
16. V. Fiore, G.D. Bella, and A. Valenza Glass-basalt/epoxy hybrid composites for marine applications Mater Des 32 4 2011 2091 2099
17. T.M. Borhan Properties of glass concrete reinforced with short basalt fiber Mater Des 42 2012 265 271
18. P. Larrinaga, C. Chastre, H.C. Biscaia, and J.T. San-Jose Experimental and numerical modeling of basalt textile reinforced mortar behavior under uniaxial tensile stress Mater Des 55 2014 66 74
19. P. Banibayat, and A. Patnaik Variability of mechanical properties of basalt fiber reinforced polymer bars manufactured by wet-layup method Mater Des 56 2014 898 906
20. S. Carmisciano, I.M.D. Rosa, F. Sarasini, A. Tamburrano, and M. Valente Basalt woven fiber reinforced vinylester composites: flexural and electrical properties Mater Des 32 2011 337 342
21. Q. Liu, M.T. Shaw, R.S. Parnas, and A.M. McDonnell Investigation of basalt fiber composite mechanical properties for applications in transportation Polym Compos 27 1 2006 41 48
22. J.S. Szabo, and T. Czigany Static fracture and failure behavior of aligned discontinuous mineral fiber reinforced polypropylene composites Polym Test 22 6 2003 711 719
23. S. Das The cost of automotive polymer composites: a review and assessment of DOE's lightweight materials composites research 2001 Oak Ridge National Laboratory p. 1-49
24. V. Manikandan, J.T.W. Jappes, S.M.S. Kumar, and P. Amuthakkannan Investigation of the effect of surface modifications on the mechanical properties of basalt fibre reinforced polymer composites Compos Part B - Eng 43 2 2012 812 818
25. J.H. Lee, K.Y. Rhee, and S.J. Park The tensile and thermal properties of modified CNT-reinforced basalt/epoxy composites Mater Sci Eng A - Struct 527 26 2010 6838 6843
26. Y. Zeng, H.Y. Liu, Y.W. Mai, and X.S. Du Improving interlaminar fracture toughness of carbon fibre/epoxy laminates by incorporation of nano-particles Compos Part B - Eng 43 1 2012 90 94
27. Q. An, A.N. Rider, and E.T. Thostenson Electrophoretic deposition of carbon nanotubes onto carbon-fiber fabric for production of carbon/epoxy composites with improved mechanical properties Carbon 50 11 2012 4130 4143
28. A. Kalam, B.B. Sahari, Y.A. Khalid, and S.V. Wong Fatigue behaviour of oil palm fruit bunch fibre/epoxy and carbon fibre/epoxy composites Compos Struct 71 1 2005 34 44
29. H. Zhang, Z. Zhang, and C. Breidt Comparison of short carbon fibre surface treatments on epoxy composites - I. Enhancement of the mechanical properties Compos Sci Technol 64 13-14 2004 2021 2202
30. S.E. Artemenko, and Y.A. Kadykova Polymer composite materials based on carbon, basalt and glass fibres Fibre Chem 40 1 2008 37 39
31. J. Sim, C. Park, and D.Y. Moon Characteristics of basalt fiber as a strengthening material for concrete structures Compos Part B - Eng 36 6-7 2005 504 512
32. F. Sarasini, J. Tirillo, M. Valente, L. Ferrante, S. Cioffi, and S. Iannace Hybrid composites based on aramid and basalt woven fabrics: impact damage modes and residual properties Mater Des 49 2013 290 302
33. R.E. Farsani, S.M.R. Khalili, Z. Hedayatnasab, and N. Soleimani Influence of thermal conditions on the tensile properties of basalt fiber reinforced polypropylene-clay nanocomposites Mater Des 53 2014 540 549
34. E. Quagliarini, F. Monni, S. Lenci, and F. Bondioli Tensile characterization of basalt fiber rods and ropes: a first contribution Constr Build Mater 34 2012 372 380
35. D. Yeboah, S. Taylor, D. McPolin, and R. Gilfillan Pull-out behaviour of axially loaded Basalt Fibre Reinforced Polymer (BFRP) rods bonded perpendicular to the grain of glulam elements Constr Build Mater 38 2013 962 969
36. G.M. Raftery, and C. Whelan Low-grade glued laminated timber beams reinforced using improved arrangements of bonded-in GFRP rods Constr Build Mater 52 2014 209 220
37. Lapko A, Urbański M. Experimental and theoretical analysis of deflections of concrete beams reinforced with basalt rebar. Arch Civ Mech Eng. http://dx.doi.org/10.1016/j.acme.2014.03.008.
38. M. Pearson, T. Donchev, and J. Salazar Long-term behaviour of prestressed basalt fibre reinforced polymer bars Proc Eng 54 2013 261 269
39. M. Urbanski, A. Lapko, and A. Garbacz Investigation on concrete beams reinforced with basalt rebars as an effective alternative of conventional R/C structures Proc Eng 57 2013 1183 1191
40. H. Zhu, G. Wu, L. Zhang, J. Zhang, and D. Hui Experimental study on the fire resistance of RC beams strengthened with near-surface-mounted high-Tg BFRP bars Compos Part B - Eng 60 2014 680 687
41. M.E.M. Mahroug, A.F. Ashour, and D. Lam Experimental response and code modelling of continuous concrete slabs reinforced with BFRP bars Compos Struct 107 2014 664 674
42. Z. Chlup, M. Černý, A. Strachota, Z. Sucharda, M. Halasová, and I. Dlouhý Influence of pyrolysis temperature on fracture response in SiOC based composites reinforced by basalt woven fabric J Eur Ceram Soc 2014 http://dx.doi.org/10.1016/j.jeurceramsoc.2014.03.003
43. F. Sarasini, J. Tirillò, M. Valente, T. Valente, S. Cioffi, and S. Iannace Effect of basalt fiber hybridization on the impact behavior under low impact velocity of glass/basalt woven fabric/epoxy resin composites Composites Part A 47 2013 109 123
44. 2 Mater Des 31 3 2010 1403 1409
45. M.T. Kim, M.H. Kim, K.Y. Rhee, and S.J. Park Study on an oxygen plasma treatment of a basalt fiber and its effect on the interlaminar fracture property of basalt/epoxy woven composites Compos Part B - Eng 42 3 2011 499 504
46. P. Larrinaga, C. Chastre, J.T. San-José, and L. Garmendia Non-linear analytical model of composites based on basalt textile reinforced mortar under uniaxial tension Compos Part B - Eng 55 2013 518 527
47. F. Sarasini, J. Tirillò, L. Ferrante, M. Valente, T. Valente, and L. Lampani Drop-weight impact behaviour of woven hybrid basalt-carbon/epoxy composites Compos Part B - Eng 59 2014 204 220
48. M.T. Kim, K.Y. Rhee, I. Jung, S.J. Park, and D. Hui Influence of seawater absorption on the vibration damping characteristics and fracture behaviors of basalt/CNT/epoxy multiscale composites Compos Part B - Eng 63 2014 61 66
49. M. Černý, M. Halasová, J. Schwaigstillová, Z. Chlup, Z. Sucharda, and P. Glogar Mechanical properties of partially pyrolysed composites with plain weave basalt fibre reinforcement Ceram Int 40 5 2014 7507 7521
50. S. Sfarra, C.I. Castanedo, C. Santulli, A. Paoletti, D. Paoletti, and F. Sarasini Falling weight impacted glass and basalt fibre woven composites inspected using non-destructive techniques Compos Part B - Eng 45 1 2013 601 608
51. D. Saravanan Spinning the rocks - basalt fibres J Inst Eng India - Part TX 86 2006 39 45
52. http://en.wikipedia.org/wiki/Basalt.
53. I.D.G. Ary Subagia, L.D. Tijing, Y. Kim, C.S. Kim, F.G.-I.V. Vista, and H.K. Shon Mechanical performance of multiscale basalt fiber-epoxy laminates containing tourmaline micro/nano particles Compos Part B - Eng 58 2014 611 617
54. T. Deak, and T. Czigany Chemical composition and mechanical properties of basalt and glass fibers: a comparison Text Res J 79 2009 645 651
55. A. Dorigato, and A. Pegoretti Fatigue resistance of basalt fibers-reinforced laminates J Compos Mater 46 2012 1773 1785
56. W. Mingchao, Z. Zuoguang, L. Yubin, L. Min, and S. Zhijie Chemical durability and mechanical properties of alkali-proof basalt fiber and its reinforced epoxy composites J Reinf Plast Compos 27 2008 393 407
57. M.T. Kim, K.Y. Rhee, S.J. Park, and D. Hui Effects of silane-modified carbon nanotubes on flexural and fracture behaviors of carbon nanotube-modified epoxy/basalt composites Compos B Eng 43 2012 2298 2302
58. T. Czigány Special manufacturing and characteristics of basalt fiber reinforced hybrid polypropylene composites: mechanical properties and acoustic emission study Compos Sci Technol 66 2006 3210 3220
59. Y. Zhang, C. Yu, P.K. Chu, F. Lv, C. Zhang, and J. Ji Mechanical and thermal properties of basalt fiber reinforced poly(butylene succinate) composites Mater Chem Phys 133 2012 845 849
60. A. Akinci, S. Yilmaz, and U. Sen Wear behavior of basalt filled low density polyethylene composites Appl Compos Mater 19 2011 499 511
61. I.M.D. Rosa, F. Marra, G. Pulci, C. Santulli, F. Sarasini, and J. Tirillò Post-impact mechanical characterisation of E-glass/basalt woven fabric interply hybrid laminates eXPRESS Polym Lett 5 2011 449 459
62. I.M.D. Rosa, F. Marra, G. Pulci, C. Santulli, F. Sarasini, and J. Tirillò Post-impact mechanical characterisation of glass and basalt woven fabric laminates Appl Compos Mater 19 2011 475 490
63. X. Wang, B. Hu, Y. Feng, F. Liang, J. Mo, and J. Xiong Low velocity impact properties of 3D woven basalt/aramid hybrid composites Compos Sci Technol 68 2008 444 450
64. G. Belingardi, and R. Vadori Low velocity impact tests of laminate glass-fiber-epoxy matrix composite material plates Int J Impact Eng 27 2002 213 229
65. E. Sevkat, B. Liaw, F. Delale, and B.B. Raju Drop-weight impact of plain-woven hybrid glass-graphite/toughened epoxy composites Compos A Appl Sci Manuf 40 2009 1090 1110
66. O.I. Benevolenski, J.K. Kocsis, K.P. Mieck, and T. Reubmann Instrumented perforation impact response of polypropylene composites with hybrid reinforcement flax/glass and flax/cellulose fibers J Thermoplast Compos Mater 13 2000 481 496
67. G. Belingardi, M.P. Cavatorta, and D.S. Paolino Repeated impact response of hand lay-up and vacuum infusion thick glass reinforced laminates Int J Impact Eng 35 2008 609 619
68. A.K. Bledzki, A. Mamun, and O. Faruk Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites eXPRESS Polym Lett 1 2007 755 762
69. P. Mertiny, K. Juss, and M.M.E. Ghareeb Evaluation of glass and basalt fiber reinforcements for polymer composite pressure piping J Pressure Vessel Technol 131 2009 061407 61414
70. H. Fukuda, and T.W. Chou A probabilistic theory of the strength of short-fibre composites with variable fibre length and orientation J Mater Sci 17 1982 1003 1011
71. P.A. Templeton Strength predictions of injection molding compounds J Reinf Plast Compos 9 1990 210 225
72. D. Kurniawan, B.S. Kim, H.Y. Lee, and J.Y. Lim Atmospheric pressure glow discharge plasma polymerization for surface treatment on sized basalt fiber/polylactic acid composites Compos Part B - Eng 43 3 2012 1010 1014
73. L. Balea, G. Dusserre, and G. Bernhart Mechanical behaviour of plain-knit reinforced injected composites: effect of inlay yarns and fibre type Compos Part B - Eng 56 2014 20 29
74. Z.M. Huang, and S. Ramakrishna Micromechanical modeling approaches for the stiffness and strength of knitted fabric composites: a review and comparative study Composites Part A 31 5 2000 479 501
75. K.H. Leong, P.J. Falzon, M.K. Bannister, and I. Herszberg An investigation of the mechanical performance of weft-knit milano-rib glass/epoxy composites Compos Sci Technol 58 2 1998 239 251
76. O.A. Khondker, K.H. Leong, I. Herszberg, and H. Hamada Impact and compression after-impact performance of weft-knitted glass textile composites Composites Part A 36 5 2005 638 648
77. A.P. Mouritz, C. Baini, and I. Herszberg Mode I interlaminar fracture toughness properties of advanced textile fibreglass composites Composites Part A 30 7 1999 859 870
78. D. Falconnet, P.E. Bourban, S. Pandita, J.A.E. Manson, and I. Verpoest Fracture toughness of weft-knitted fabric composites Composites Part B 33 8 2002 579 588
79. S.D. Pandita, D. Falconnet, and I. Verpoest Impact properties of weft knitted fabric reinforced composites Compos Sci Technol 62 7-8 2002 1113 1123
80. O.A. Khondker, I. Herszberg, and K.H. Leong An investigation of the structure-property relationship of knitted composites J Compos Mater 35 6 2001 489 508
81. M. Abounaim, G. Hoffmann, O. Diestel, and C. Cherif Development of flat knitted spacer fabrics for composites using hybrid yarns and investigation of two-dimensional mechanical properties Text Res J 79 7 2009 596 610
82. K.H. Leong, M. Nguyen, and I. Herszberg The effects of deforming knitted glass fabrics on the basic composite mechanical properties J Mater Sci 34 10 1999 2377 2387
83. C. Martias, Y. Joliff, and C. Favotto Effects of the addition of glass fibers, mica and vermiculite on the mechanical properties of a gypsum-based composite at room temperature and during a fire test Compos Part B - Eng 62 2014 37 53
84. B. Ozturk, F. Arslan, and S. Ozturk Hot wear properties of ceramic and basalt fiber reinforced hybrid friction materials Tribol Int 40 2007 37 48
85. G. Romhány, J.K. Kocsis, and T. Czigány Tensile fracture and failure behavior of thermoplastic starch with unidirectional and cross-ply flax fiber reinforcements Macromol Mater Eng 288 9 2003 699 707
86. G. Dogossy, and T. Czigany Failure mode characterization in maize hull filled polyethylene composites by acoustic emission Polym Test 25 3 2006 353 357
87. T. Czigany, K. Poloskei, and J.K. Kocsis Fracture and failure behavior of basalt fiber mat-reinforced vinylester/epoxy hybrid resins as a function of resin composition and fiber surface treatment J Mater Sci 40 21 2005 5609 5618
88. R.H. Newman, M.J.L. Guen, M.A. Battley, and J.E.P. Carpenter Failure mechanisms in composites reinforced with unidirectional Phormium leaf fibre Composites Part A 41 3 2010 353 359
89. R. Morent, N.D. Geyter, J. Verschuren, K.D. Clerck, P. Kiekens, and C. Leys Non-thermal plasma treatment of textiles Surf Coat Technol 202 2008 3427 3449
90. M. Botev, H. Betchev, D. Bikiaris, and C. Panayiotou Mechanical properties and viscoelastic behavior of basalt fiber-reinforced polypropylene J Appl Polym Sci 74 1999 523 531
91. P.I. Bashtannik, A.I. Kabak, and Y.Y. Yakovchuk The effect of adhesion interaction on the mechanical properties of thermoplastic basalt plastics Mech Compos Mater 39 1 2003 85 88
92. V. Fiore, F. Alagna, G.D. Bella, and A. Valenza On the mechanical behavior of BFRP to aluminum AA6086 mixed joints Compos Part B - Eng 48 2013 79 87
93. Brik VB. Performance evaluation of basalt fibers and composite rebars as concrete reinforcement. Tech Res Report submitted to NCHRP-IDEA Project 45; 1999.
94. Brik VB. Advanced concept concrete using basalt fiber composite reinforcement. Tech Res Report submitted to NCHRP-IDEA Project 25; 1999.
95. T. Alomayri, F.U.A. Shaikh, and I.M. Low Characterisation of cotton fibre-reinforced geopolymer composites Compos Part B - Eng 50 2013 1 6
96. Y. Zhang, W. Sun, and Z. Li Impact behavior and microstructural characteristics of PVA fiber reinforced fly ash-geopolymer boards prepared by extrusion technique J Mater Sci 41 10 2006 2787 2794
97. D.P. Dias, and C. Thaumaturgo Fracture toughness of geopolymeric concretes reinforced with basalt fibres Cement Concr Compos 27 1 2005 49 54
98. W. Li, and J. Xu Mechanical properties of basalt fibre reinforced geopolymeric concrete under impact loading Mater Sci Eng 505 1-2 2009 178 186
99. P.H. Bischoff, and S.H. Perry Compressive behavior of concrete at high strain rates Mater Struct 24 6 1991 425 450
100. W.M. Li, J.Y. Xu, L.J. Shen, and Q. Li Dynamic mechanical properties of basalt fiber reinforced concrete using a split Hopkinson pressure bar Acta Mater Comp Sinica 25 2 2008 135 142
101. J.M.L. Reis Fracture and flexural characterization of natural fiber-reinforced polymer concrete Constr Build Mater 20 9 2006 73 78
102. F.A. Silva, R.D.T. Filho, J.A.M. Filho, and E.M.R. Fairbairn Physical and mechanical properties of durable sisal fibre-cement composites Constr Build Mater 24 5 2010 777 785
103. F.A. Silva, B. Mobasher, and R.D.T. Filho Cracking mechanisms in durable sisal fibre reinforced cement composites Cement Concr Compos 31 10 2009 721 730
104. R.D.T. Filho, D. Romildo, K. Scrivener, G.L. England, and K. Ghavami Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites Cement Concr Compos 22 2 2000 127 143
105. A. Borri, M. Corradi, and E. Speranzini Reinforcement of wood with natural fibers Compos Part B - Eng 53 2013 1 8
106. F.L. Fan, J.Y. Xu, E.L. Bai, and Q. He Experimental study on impact-mechanics properties of basalt fibre reinforced concrete Adv Mater Res 168-170 2011 1910 1914
107. Z.S. Wu, Y.J. Kim, H. Diab, and X. Wang Recent developments in long-term performance of FRP composites and FRP-concrete interface Adv Struct Eng 3 5 2010 891 903
108. Z.S. Wu, X. Wang, K. Iwashita, T. Sasaki, and Y. Hamaguchi Tensile fatigue behaviour of FRP and hybrid FRP sheets Compos B Eng 41 5 2010 396 402
109. S. Marouani, L. Curtil, and P. Hamelin Ageing of carbon/epoxy and carbon/vinylester composites used in the reinforcement and/or the repair of civil engineering structures Compos B Eng 43 2012 2020 2030
110. V.M. Karbhari Durability of composites for civil structural applications 2007 Woodhead Publishing in Materials and CRC Press Cambridge
111. H. Saadatmanesh, M. Tavakkolizadeh, and D. Mostofinejad Environmental effects on mechanical properties of wet lay-up fiber reinforced polymer ACI Mater J 107 3 2010 267 274
112. W. Sun, R. Mu, X. Luo, and C.W. Miao Effect of chloride salt, freeze-thaw cycling and externally applied load on the performance of the concrete Cem Concr Res 32 12 2002 1859 1864
113. J.W. Shi, H. Zhu, Z.S. Wu, R. Seracino, and G. Wu Bond behavior between BFRP sheet and concrete substrate under the coupled effects of freeze-thaw cycling and sustained load J Compos Constr 17 4 2013 530 542
114. J. Rivera, and V.M. Karbhari Cold-temperature and simultaneous aqueous environment related degradation of carbon/vinylester composites Compos B Eng 33 1 2002 17 24
115. P.K. Dutta, and D. Hui Low-temperature and freeze-thaw durability of thick composites Compos B Eng 27 3-4 1996 371 379
116. H.C. Wu, and A. Yan Time-dependent deterioration of FRP bridge deck under freeze/thaw conditions Compos B Eng 42 2011 1226 1232
117. F. Nardone, M. Ludovico, F. Basalo, A. Prota, and A. Nanni Tensile behavior of epoxy based FRP composites under extreme service conditions Compos B Eng 43 3 2012 1468 1474
118. J.W. Shi, H. Zhu, G. Wu, and Z.S. Wu Tensile behavior of FRP and hybrid FRP sheets in freeze-thaw cycling environments Compos Part B - Eng 60 2014 239 247
119. H. Li, G.J. Xian, and H. Zhang Freeze-thaw resistance of unidirectional fiber reinforced epoxy composites J Appl Polym Sci 123 6 2012 3781 3788
120. M.F. Green FRP repair of concrete structures: performance in cold regions Int J Mater Prod Technol 28 1-2 2007 160 177
121. H.M. Diab, and O.A. Farghal Bond strength and effective bond length of FRP sheets/plates bonded to concrete considering the type of adhesive layer Compos Part B - Eng 58 2014 618 624
122. J. Militky, V. Kovacic, and J. Rubnerova Influence of thermal treatment on tensile failure of basalt fibers Eng Fract Mech 69 9 2002 1025 1033
123. X. Wang, and Z. Wu Integrated high-performance thousand-metre scale cable-stayed bridge with hybrid FRP cables Compos Part B - Eng 41 2 2010 166 175
124. J.I. Lim, K.Y. Rhee, H.J. Kim, and D.H. Jung Effect of stacking sequence on the flexural and fracture properties of carbon/basalt/epoxy hybrid composites Carbon Lett 15 2 2014 125 128
125. U.L.D. Vergara, M. Sarrionandia, K. Gondra, and J. Aurrekoetxea Impact behaviour of basalt fibre reinforced furan composites cured under microwave and thermal conditions Compos Part B - Eng 66 2014 156 161
126. B. Sun, D. Hu, and B. Gu Transverse impact damage and energy absorption of 3-D multi-structured knitted composite Compos Part B - Eng 40 6 2009 572 583
127. L. Jin, H. Hu, B. Sun, and B. Gu A simplified microstructure model of bi-axial warp-knitted composite for ballistic impact simulation Compos Part B - Eng 41 5 2010 337 353
128. G. Landucci, F. Rossi, C. Nicolella, and S. Zanelli Design and testing of innovative materials for passive fire protection Fire Saf J 44 8 2009 1103 1109
129. A.P. Mouritz, S. Feih, E. Kandare, and A.G. Gibson Thermal-mechanical modelling of laminates with fire protection coating Compos Part B - Eng 48 2013 68 78
130. J.R. Correia, F.A. Branco, J.G. Ferreira, Y. Bai, and T. Keller Fire protection systems for building floors made of pultruded GFRP profiles: Part 1: Experimental investigations Compos Part B - Eng 41 8 2010 617 629
131. J.P. Firmo, J.R. Correia, and P. França Fire behaviour of reinforced concrete beams strengthened with CFRP laminates: protection systems with insulation of the anchorage zones Compos Part B - Eng 43 3 2012 1545 1556
132. A. Palmieri, S. Matthys, and L. Taerwe Experimental investigation on fire endurance of insulated concrete beams strengthened with near surface mounted FRP bar reinforcement Compos Part B - Eng 43 3 2012 885 895
133. W. Jiang, S.S. Sundarram, D. Wong, J.H. Koo, and W. Li Polyetherimide nanocomposite foams as an ablative for thermal protection applications Compos Part B - Eng 58 2014 559 565
134. E. Nigro, G. Cefarelli, A. Bilotta, G. Manfredi, and E. Cosenza Guidelines for flexural resistance of FRP reinforced concrete slabs and beams in fire Compos Part B - Eng 58 2014 103 112
135. Reddy BR, Ravi KM, Waugh BK. Compositions comprising melt-processed inorganic fibers and methods of using such compositions. US patent 7493968B2; 2009.
136. Reddy BR, Heathman JF. Cement compositions comprising high aspect ratio materials and methods of use in subterranean formations. US patent 8123852B2; 2012.
137. T.D. Hung, P. Louda, D. Kroisová, O. Bortnovsky, and N.T. Xiem New generation of geopolymer composite for fire-resistance Pavla Tesinova, Advances in composite materials - analysis of natural and man-made materials vol. 4 2011 InTech 73 98
138. Q. Wu, K. Chi, Y. Wu, and S. Lee Mechanical, thermal expansion, and flammability properties of co-extruded wood polymer composites with basalt fiber reinforced shells Mater Des 60 2014 334 342
139. O. Medvedyev, and Y. Tsybulya Basalt use in hot gas filtration Filtration 42 1 2005 34 37
140. Y. Tsibulja, G. Rice, and P. Kuziw Volcanic rock fabric filter bags, the guide-book on FSU's cement and concrete industry-2000/01 2001 Leocement Pbl Kiev p. 221-3
141. J. Johnson, and J. Handy Breathing new life into dust collection filters Ceram Ind Mag February 2003 39 41
142. 2 microdust on strength and heat resistance properties of autoclaved aerated concrete Constr Build Mater 50 2014 718 726
143. M. Černý, P. Glogar, Z. Sucharda, Z. Chlup, and J. Kotek Partially pyrolyzed composites with basalt fibres - Mechanical properties at laboratory and elevated temperatures Composites Part A 40 10 2009 1650 1659
144. R.H. Haddad, R.J.A. Saleh, and N.M.A. Akhras Effect of elevated temperature on bond between steel reinforcement and fiber reinforced concrete Fire Saf J 43 5 2008 334 343
145. B. Wei, H. Cao, and S. Song Tensile behavior contrast of basalt and glass fibers after chemical treatment Mater Des 31 9 2010 4244 4250
146. J.M. Park, W.G. Shin, and D.J. Yoon A study of interfacial aspects of epoxy-based composites reinforced with dual basalt and SiC fibres by means of the fragmentation and acoustic emission techniques Compos Sci Technol 59 3 1999 355 370
147. Y. Shan, and K. Liao Environmental fatigue of unidirectional glass-carbon fiber reinforced hybrid composite Composites Part B 32 4 2001 355 363
148. T.K. Tsotsis, S. Keller, K. Lee, J. Bardis, and J. Bish Aging of polymeric composite specimens for 5000 h at elevated pressure and temperature Compos Sci Technol 61 1 2001 75 86
149. M. Berozashvili Continuous reinforcing fibers are being offered for construction, civil engineering and other composites applications Adv Mater Com News Compos Worldwide 21 6 2001 5 6
150. B. Wei, H. Cao, and S. Song Environmental resistance and mechanical performance of basalt and glass fibers Mater Sci Eng A 527 18-19 2010 4708 4715
151. G. Huang Tensile behaviors of quartz Aramid and glass filaments after NaOH treatment Mater Des 29 10 2008 1893 1896
152. C. Scheffler, T. Förster, E. Mäder, G. Heinrich, S. Hempel, and V. Mechtcherine Aging of alkali-resistant glass and basalt fibers in alkaline solutions: evaluation of the failure stress by Weibull distribution function J Non Cryst Solids 355 52-54 2009 2588 2595
153. V.A. Rybin, A.V. Utkin, and N.I. Baklanova Alkali resistance, microstructural and mechanical performance of zirconia-coated basalt fibers Cem Concr Res 53 2013 1 8
154. L. Kumosa, D. Armentrour, and M. Kumosa An evaluation of the critical conditions for the initiation of stress corrosion cracking in unidirectional-glass/polymer composites Compos Sci Technol 61 4 2001 615 623
155. V. Nasir, H. Karimipour, F.T. Behrooz, and M.M. Shokrieh Corrosion behaviour and crack formation mechanism of basalt fibre in sulphuric acid Corros Sci 64 2012 1 7
156. Q. Liu, M.T. Shaw, R.S. Parnas, and A.M. McDonnell Investigation of basalt fibre composite aging behaviour for applications in transportation Polym Compos 27 5 2006 475 483
157. M.M. Shokrieh, and M. Memar Stress corrosion cracking of basalt/epoxy composites under bending loading Appl Compos Mater 17 2 2010 121 135
158. S. Baştürk, H. UyanIk, and Z. Kazanci An analytical model for predicting the deflection of laminated basalt composite plates under dynamic loads Compos Struct 2014 http://dx.doi.org/10.1016/j.compstruct.2014.05.018
159. R.V. Subramanian, and H.F. Austin Silane coupling agents in basalt-reinforced polyester composites Int J Adhes Adhes 1 1 1980 50 54
160. J.S. Wang, J.D. Kim, and H.J. Yoon Mechanical characteristics of fused cast basalt tube encased in steel pipe for protecting steel surface Trans Nonferrous Met Soc China 19 4 2009 935 940
161. S.S. Daood, G. Ord, T. Wilkinson, and W. Nimmo Fuel additive technology - NOx reduction, combustion efficiency and fly ash improvement for coal fired power stations Fuel 2014 http://dx.doi.org/10.1016/j.fuel.2014.04.032
162. S.B. Milman, M.G. Velikanova, and L.E. Kotov Development and study of loadbearing heat insulation Cryogenics 36 2 1996 127 130
163. A. Dorigato, and A. Pegoretti Fatigue resistance of basalt fibers-reinforced laminates J Compos Mater 46 15 2012 1773 1785
164. L.C. Hao, and W.D. Yu Evaluation of thermal protective performance of basalt fibre nonwoven fabrics J Therm Anal Calorim 100 2 2010 551 555
165. http://www.basfiber.com/automotive.
166. http://basaltfm.com/eng/nav/materials.html.
167. http://www.dostkimya.com/en/product-browser/staple-chopped-basalt-fiber/26.
168. A.G. Novitskii, and V.V. Sudakov An unwoven basalt-fibre material for the encasing of fibrous insulation: an alternative to glass cloth Refract Ind Ceram 45 4 2004 234 241
169. M.T. Kim, K.Y. Rhee, H.J. Kim, and D.H. Jung A study on the fracture toughness of seawater-absorbed carbon nanotube/epoxy/basalt composites Carbon Lett 14 3 2013 190 192
170. J. Novák, and K. Prach Artificial sowing of endangered dry grassland species into disused basalt quarries Flora 205 3 2010 179 183
171. J.M.G. Nunes, R.M. Kautzmann, and C. Oliveira Evaluation of the natural fertilizing potential of basalt dust wastes from the mining district of Nova Prata (Brazil) J Clean Prod 2014 http://dx.doi.org/10.1016/j.jclepro.2014.04.032
172. L. Andrić, Z.A. Pavlović, M. Trumić, A. Prstić, and Z. Tanasković Specific characteristics of coating glazes based on basalt Mater Des 39 2012 9 13
173. N.I. Kharbediya, and V.M. Bakhtadze Basalt glaze for coating ceramics Glass Ceram 24 8 1967 463
174. L.I. Dvorkin, and I.K. Galushko Fritted basalt glazes Glass Ceram 28 4 1971 255 258
175. L.I. Dvorkin, and I.K. Galushko Glazes based on basalts Glass Ceram 26 11 1969 36 38
176. A.I. Poznyak, I.A. Levitskii, and S.E. Barantseva Basaltic and granitic rocks as components of ceramic mixes for interior wall tiles Glass Ceram 69 7-8 2012 262 266
177. M.T. Kim, and K.Y. Rhee Flexural behavior of carbon nanotube-modified epoxy/basalt composites Carbon Lett 12 3 2011 177 179
178. M.T. Kim, K.Y. Rhee, H.J. Kim, and D.H. Jung Effect of moisture absorption on the flexural properties of basalt/CNT/epoxy composites Carbon Lett 13 3 2012 187 189