Influence of pyrolysis temperature on fracture response in SiOC based composites reinforced by basalt woven fabric

Journal of the European Ceramic Society

Volumn 34, Issue 14, 2014, Pages 3389-3398

  Chlup, Zdeněk ^a   Černý, Martin ^b   Strachota, Adam ^c   Sucharda, Zbyněk ^b   Halasová, Martina ^a,d   Dlouhý, Ivo ^a  

^a INSTITUTE OF PHYSICS OF MATERIALS   (Czech Republic)

^b INSTITUTE OF ROCK STRUCTURE AND MECHANICS   (Czech Republic)

^c INSTITUTE OF MACROMOLECULAR CHEMISTRY   (Czech Republic)

^d BRNO UNIVERSITY OF TECHNOLOGY   (Czech Republic)

Author keywords

Basalt fibre; CMCs; Fracture behaviour; Polysiloxane; Pyrolysis

Indexed keywords

FRACTURE MECHANICS; FRACTURE TOUGHNESS; PYROLYSIS; REINFORCEMENT; RESINS; SILICONES; WEAVING;

CMCS; COMPOSITE MATRICES; FRACTOGRAPHIC ANALYSIS; FRACTURE BEHAVIOUR; FRACTURE MECHANISMS; POLYSILOXANE; POLYSILOXANE RESINS; PYROLYSIS TEMPERATURE;

BASALT;

EID: 84904728916     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2014.03.003     Document Type: Article

References (41)

1. Calard V., Lamon J. A probabilistic-statistical approach to the ultimate failure of ceramic-matrix composites-part I: experimental investigation of 2d woven sic/sic composites. Compos. Sci. Technol. 2002, 62(3):385-393.
2. Lamon J., Thommeret B., Percevault C. Probabilistic-statistical approach to matrix damage and stress-strain behavior of 2-d woven sic/sic ceramic matrix composites. J. Eur. Ceram. Soc. 1998, 18(13):1797-1808.
3. Goto K., Kagawa Y. Fracture behaviour and toughness of a plane-woven sic fibre-reinforced sic matrix composite. Mater. Sci. Eng. A 1996, 211(1-2):72-81.
4. Mouchon E., Colomban P. Oxide ceramic matrix/oxide fibre woven fabric composites exhibiting dissipative fracture behaviour. Composites 1995, 26(3):175-182.
5. Dong R., Hirata Y., Sueyoshi H., Higo M., Uemura Y. Polymer impregnation and pyrolysis (PIP) method for the preparation of laminated woven fabric/mullite matrix composites with pseudoductility. J. Eur. Ceram. Soc. 2004, 24(1):53-64.
6. Lee S.H., Weinmann M., Aldinger F. Processing and properties of c/si-b-c-n fiber-reinforced ceramic matrix composites prepared by precursor impregnation and pyrolysis. Acta Mater. 2008, 56(7):1529-1538.
7. Lange F.F., Tu W.C., Evans A.G. Processing of damage-tolerant, oxidation-resistant ceramic matrix composites by a precursor infiltration and pyrolysis method. Mater. Sci. Eng. A 1995, 195(0):145-150.
8. Miracle D.B., Donaldson S.L. ASM Handbook, vol. 21 - Composites 2001, ASM International, http://ims.asminternational.org/portal/site/ims/AsmStore/ProductDetails/?vgnextoid=d56253501f0f8110VgnVCM100000701e010aRCRD#details.
9. Alsayed S., Al-Salloum Y., Almusallam T., El-Gamal S., Aqel M. Performance of glass fiber reinforced polymer bars under elevated temperatures. Composites B Eng. 2012, 43(5):2265-2271.
10. Halasova M., Chlup Z., Strachota A., Cerny M., Dlouhy I. Mechanical response of novel sioc glasses to high temperature exposition. J. Eur. Ceram. Soc. 2012, 32(16):4489-4495.
11. Xu T., Ma Q., Chen Z. Mechanical property and microstructure evolutions of cf/sioc composites with increasing annealing temperature in reduced pressure environment. Ceram. Int. 2012, 38(1):605-611.
12. Renlund G.M., Prochazka S., Doremus R.H. Silicon oxycarbide glasses. 1. Preparation and chemistry. J. Mater. Res. 1991, 6(12):2716-2722.
13. Renlund G.M., Prochazka S., Doremus R.H. Silicon oxycarbide glasses. 2. Structure and properties. J. Mater. Res. 1991, 6(12):2723-2734.
14. Chlup Z., Cerny M., Strachota A., Kozak V. Properties of modified polysiloxane based ceramic matrix for long fibre reinforced composite materials. Plast. Rubber Compos. 2011, 40(6-7):380-385.
15. Duan L., Ma Q. Effect of pyrolysis temperature on the pore structure evolution of polysiloxane-derived ceramics. Ceram. Int. 2012, 38(4):2667-2671.
16. Duan L., Ma Q., Chen Z. Preparation and characterization of mesoporous silicon oxycarbide ceramics without free carbon from polysiloxane. J. Eur. Ceram. Soc. 2013, 33(4):841-846.
17. Davis J.B., Lofvander J.P.A., Evans A.G., Bischoff E., Emiliani M.L. Fiber coating concepts for brittle-matrix composites. J. Am. Ceram. Soc. 1993, 76(5):1249-1257.
18. Perez-Rigueiro J., Celemin J., Llorca J., Herrero P. Oxidation of bn/nicalon fiber interfaces in ceramic-matrix composites and its effect on fiber strength. J. Am. Ceram. Soc. 1999, 82(12):3494-3500.
19. Kaya C., Kaya F., Boccaccini A.R., Chawla K.K. Fabrication and characterisation of Ni-coated carbon fibre-reinforced alumina ceramic matrix composites using electrophoretic deposition. Acta Mater. 2001, 49(7):1189-1197.
20. Kaludjerovic B.V., Kljajevic L.M., Lausevic Z.V. The effect of partially carbonized fibers on the mechanical properties of carbon/carbon composites. J. Mater. Process. Technol. 2012, 212(1):157-163.
21. Chlup Z., Cerny M., Strachota A., Dlouhy I., Sandera P. Role of pyrolysis conditions on fracture behaviour of fibre reinforced composites. Mater. Struct. Micromech. Fract. 2011, 465:455-458.
22. Strachota A., Cerny M., Chlup Z., Slouf M., Hromadkova J., Plestil J., et al. Optimization of sol-gel/pyrolysis routes to silicon oxycarbide glasses. J. Non-Cryst. Solids 2012, 358(20):2771-2782.
23. Cerny M., Sucharda Z., Strachota A., Chlup Z., Glogar P. Influence of the organic/inorganic pyrolysis conversion level on mechanical properties of composites with e-glass or basalt fibre reinforcement. Ceramics-Silikaty 2010, 54(4):345-351.
24. Supova M., Svitilova J., Chlup Z., Cerny M., Weishauptova Z., Suchy T., et al. Relation between mechanical properties and pyrolysis temperature of phenol formaldehyde resin for gas separation membranes. Ceramics-Silikaty 2012, 56(1):40-49.
25. Shanan Moore Stevens N., Rezac M.E. Formation of hybrid organic/inorganic composite membranes via partial pyrolysis of poly(dimethyl siloxane). Chem. Eng. Sci. 1998, 53(9):1699-1711.
26. Trick K.A., Saliba T.E. Mechanisms of the pyrolysis of phenolic resin in a carbon/phenolic composite. Carbon 1995, 33(11):1509-1515.
27. Cerny M., Strachota A., Chlup Z., Sucharda Z., Zaloudkova M., Glogar P., et al. Strength, elasticity and failure of composites with pyrolyzed matrices based on polymethylsiloxane resins with optimized ratio of d and t components. J. Compos. Mater. 2013, 47(8):1055-1066.
28. Cerny M., Glogar P., Sucharda Z., Chlup Z., Kotek J. Partially pyrolyzed composites with basalt fibres - mechanical properties at laboratory and elevated temperatures. Composites A Appl. Sci. Manuf. 2009, 40:1650-1659.
29. Chawla N., Chawla K.K., Koopman M., Patel B., Coffin C., Eldridge J.I. Thermal-shock behavior of a Nicalon-fiber-reinforced hybrid glass-ceramic composite. Compos. Sci. Technol. 2001, 61(13):1923-1930.
30. Dlouhy I., Chlup Z., Chawla K., Kulkarni R., Koopman M., Boccaccini A. Effect of static pre-loading on fracture toughness of Nicalon (r) fibre glass matrix composite. Mater. Sci. Eng. A Struct. Mater. Properties Microstruct. Process. 2004, 367(1-2):17-23.
31. Dlouhy I., Kotoul M., Vyslouzil T., Chlup Z., Boccaccini A. Crack resistance curve in glass matrix composite reinforced by long Nicalon (r) fibres. J. Mater. Sci. 2008, 43(12):4022-4030.
32. Cerny M., Glogar P., Golias V., Hruska J., Jakes P., Sucharda Z., et al. Comparison of mechanical properties and structural changes of continuous basalt and glass fibres at elevated temperatures. Ceramics-Silikaty 2007, 51:82-88.
33. 843-1, E. Advanced Technical Ceramics. Mechanical Properties of Monolithic Ceramics at Room Temperature. Determination of Flexural Strength 2007.
34. Cerny M., Glogar P., Manocha L.M. Resonant frequency study of tensile and shear elasticity moduli of carbon fibre reinforced composites (CFRC). Carbon 2000, 38(15):2139-2149.
35. 843-2, E. Advanced Technical Ceramics - Mechanical Properties of Monolithic Ceramics at Room Temperature - Part 2: Determination of Young's Modulus, Shear Modulus and Poisson's Ratio 2006.
36. EN14425-3. Advanced Technical Ceramics - Test Methods for Determination of Fracture Toughness of Monolithic Ceramics - Part 3: Chevron Notched Beam (CNB) Method 2010.
37. Bluhm J.I. Slice synthesis of a three dimensional "work of fracture" specimen. Eng. Fract. Mech. 1975, 7(3):593-604.
38. Boccaccini A.R., Rawlings R.D., Dlouhý I. Reliability of the chevron-notch technique for fracture toughness determination in glass. Mater. Sci. Eng. A 2003, 347(1-2):102-108.
39. Dlouhy I., Boccaccini A.R. Reliability of the chevron notch technique for fracture toughness determination in glass composites reinforced by continuous fibres. Scr. Mater. 2001, 44(3):531-537.
40. Dlouhy I., Chlup Z., Atiq S., Boccaccini A., Bradt R., Munz D., et al. Fracture resistance of hybrid glass matrix composite and its degradation due to thermal ageing and thermal shock. Active Mater. Nanoscale Mater. Composites Glass Fundam. 2005, 14:263-274.
41. Chlup Z., Flasar P., Dlouhy I. Response of inherently brittle materials on higher loading rates. Eng. Fract. Mech. 2010, 77(2):359-366.