Bond behavior between basalt fiber-reinforced polymer sheet and concrete substrate under the coupled effects of freeze-thaw cycling and sustained load

Journal of Composites for Construction

Volumn 17, Issue 4, 2013, Pages 530-542

  Shi, Jiawei ^a   Zhu, Hong ^a   Wu, Zhishen ^a   Seracino, Rudolf ^b   Wu, Gang ^a  

^a China   (China)

^b North Carolina State University   (United States)

Author keywords

Basalt fiber reinforced polymer; Bond; Coupled effects; Durability; Freeze thaw cycling; Sustained load

Indexed keywords

COUPLED EFFECT; DIGITAL IMAGE CORRELATIONS; EXPERIMENTAL INVESTIGATIONS; FIBER REINFORCED POLYMERS; FIBER-REINFORCED POLYMER SHEETS; FREEZE-THAW CYCLING; FREEZE-THAW RESISTANCE; SUSTAINED LOADS;

BONDING; CONCRETE BLOCKS; CONCRETES; DEBONDING; EPOXY RESINS; FIBER REINFORCED PLASTICS; FREEZING; INTERFACES (MATERIALS); POLYMERS; RESINS; TESTING;

DURABILITY;

EID: 84880320190     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)CC.1943-5614.0000349     Document Type: Article

References (32)

1. American Concrete Institute (ACI). (2008). " Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures." ACI 440.2R0-08, Farmington Hills, MI.
2. ASTM. (2003). " Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing." C666/C666M-03, West Conshohocken, PA.
3. Chajes, M. J., Thomson, T. A., and, Farshman, C. A. (1995). " Durability of concrete beams externally reinforced with composite fabrics." Constr. Build. Mater. CBUMEZ 0950-0618, 9 (3), 141-148. 10.1016/0950-0618(95) 00006-2
4. Chen, J. F., and, Teng, J. G. (2001). " Anchorage strength models for FRP and steel plates bonded to concrete." J. Struct. Eng. JSENDH 0733-9445, 127 (7), 784-791. 10.1061/(ASCE)0733-9445(2001)127:7(784)
5. Chinese Standard GB 50608. (2010). " Technical code for infrastructure application of FRP composites." GB 50608-2010, China Architecture and Building Press, Beijing (in Chinese).
6. Chinese Standard GB/T 50082. (2009). " Standard for test methods of long-term performance and durability of ordinary concrete." GB/T 50082-2009, China Architecture and Building Press, Beijing (in Chinese).
7. Czaderski, C., Soudki, K., and, Motavalli, M. (2010). " Front and side view image correlation measurements on FRP to concrete pull-off bond tests." J. Compos. Constr. JCCOF2 1090-0268, 14 (4), 451-463. 10.1061/(ASCE)CC.1943-5614.0000106
8. Dai, J. G., Ueda, T., and, Sato, Y. (2005). " Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method." J. Compos. Constr. JCCOF2 1090-0268, 9 (1), 52-62. 10.1061/(ASCE)1090-0268(2005)9:1(52)
9. Dai, Y. Q., Sun, Z. Y., Wu, G., and, He, X. Y. (2010). " Whole-field deformation measurement of concrete structure based on digital image correlation." J. Southeast Univ., 40 (4), 829-834 (in Chinese).
10. Davalos, J. F., Kodkani, S. S., Ray, I., and, Boyajian, D. M. (2005). " A fracture mechanic approach for interface durability of bonded FRP to concrete." Proc., 7th Int. Symp. on FRP Reinforcement for Concrete Structures (FRPRCS-7) American Concrete Institute (ACI), Farmington Hills, MI, 1465-1479.
11. Diab, H., and, Wu, Z. S. (2007). " Nonlinear constitutive model for time-dependent behavior of FRP-concrete interface." Compos. Sci. Technol. CSTCEH 0266-3538, 67 (11-12), 2323-2333. 10.1016/j.compscitech.2007.01.018
12. Dutta, K. (1988). " Structural fiber composite materials for cold regions." J. Cold Reg. Eng. JCRGEI 0887-381X, 2 (3), 124-134. 10.1061/(ASCE)0887-381X(1988)2:3(124)
13. Fava, G., Mazzotti, C., Poggi, C., and, Savoia, M. (2007). " Durability of FRP-concrete bonding exposed to aggressive environment." Proc., 8th Int. Symp. on FRP Reinforcement for Concrete Structures (FRPRCS-8) (CD-ROM), American Concrete Institute (ACI), Farmington Hills, MI.
14. Gao, B., Kim, J. K., and, Leng, C. K. Y. (2004). " Experimental study on RC beams with FRP strips bonded with rubber modified resins." Compos. Sci. Technol. CSTCEH 0266-3538, 64 (16), 2557-2564. 10.1016/j. compscitech.2004.05.016
15. Green, M. F., Bisby, L. A., Beaudoin, Y., and, Labossière, P. (2000). " Effect of freeze-thaw cycles on the bond durability between fiber reinforced polymer plate reinforcement and concrete." Can. J. Civ. Eng. CJCEB8 0315-1468, 27 (5), 949-959. 10.1139/l00-031
16. Japan Society of Civil Engineers (JSCE). (2001). " Recommendations for upgrading of concrete structures with use of continuous fiber sheets." Concrete engineering series, K. Maruyama., ed., Vol. 41, Japan Society of Civil Engineers (JSCE), Tokyo, Japan.
17. Jia, J., Boothby, T. E., Bakis, C. E., and, Brown, T. L. (2005). " Durability evaluation of glass fiber reinforced-polymer-concrete bonded interfaces." J. Compos. Constr. JCCOF2 1090-0268, 9 (4), 348-359. 10.1061/(ASCE)1090-0268(2005)9:4(348)
18. Karbhari, V. M. (2007). Durability of composites for civil structural applications, Woodhead Publishing in Materials and CRC Press, Cambridge, UK.
19. Li, J. Y., Deng, Z. G., and, Cao, J. G. (2001). " Quantitative design on the frost resistance of concrete." Durability study and application of concrete in key civil engineering, China Building Material Industry Press, Beijing, 265-272 (in Chinese).
20. Mei, X. (2005). " Study on the toughening and durability of adhesive materials used of strengthening concrete structure with CFRP." Master's thesis, Tsinghua, Univ., Beijing (in Chinese).
21. Mukhopadhyaya, P., Swamy, R. N., and, Lynsdale, C. J. (1998). " Influence of aggressive exposure conditions on the behaviour of adhesive bonded concrete-GFRP joints." Constr. Build. Mater. CBUMEZ 0950-0618, 12 (8), 427-446. 10.1016/S0950-0618(98)00030-0
22. Nardone, F., Ludovico, M., Basalo, F., Prota, A., and, Nanni, A. (2012). " Tensile behavior of epoxy based FRP composites under extreme service conditions." Compos. B Eng. 1359-8368, 43 (3), 1468-1474. 10.1016/j.compositesb.2011.08.042
23. Pan, J. L., and, Leung, C. K. Y. (2009). " Effect of concrete composition on interfacial parameters governing FRP debonding from the concrete substrate." Adv. Struct. Eng. 1369-4332, 12 (5), 627-637. 10.1260/136943309789867908
24. Silva, M. A. G., and, Biscaia, H. (2008). " Degradation of bond between FRP and RC beams." Compos. Struct. COMSE2 0263-8223, 85 (2), 166-174. 10.1016/j.compstruct.2007.10.014
25. Strandlund, S. (2011). " Freeze-thawing of polyester e-glass as an evaluation of an ASTM international test standard proposal." Master's thesis, Univ. of Mississippi, Oxford, MS.
26. Subramaniam, K. V., Ali-Ahmad, M., and, Ghosn, M. (2008). " Freeze-thaw degradation of FRP-concrete interface: Impact on cohesive fracture response." Eng. Fract. Mech. EFMEAH 0013-7944, 75 (13), 3924-3940. 10.1016/j.engfracmech.2007.12.016
27. Tam, S., and, Sheikh, S. A. (2008). " Behavior of fibre reinforced polymer (FRP) and FRP bond under freeze-thaw cycles and sustained load." Fourth Int. Conf. on FRP Composites in Civil Engineering (CICE2008) (CD-ROM), International Institute for FRP in Construction (IIFC), Winnipeg, MB, Canada.
28. Wu, Z. S., and, Islam, S. M. (2009). " A three-parameter bond strength model for FRP-concrete interface." J. Reinforc. Plast. Compos. 0731-6844, 28 (19), 2309-2323. 10.1177/0731684408091961
29. Wu, Z. S., Kim, Y. J., Diab, H., and, Wang, X. (2010). " Recent developments in long-term performance of FRP composites and FRP-concrete interface." Adv. Struct. Eng. 1369-4332, 13 (5), 891-903. 10.1260/1369-4332.13.5.891
30. Wu, Z. S., Yuan, H., and, Niu, H. (2002). " Stress transfer and fracture propagation in different kinds of adhesive joints." J. Eng. Mech. JENMDT 0733-9399, 128 (5), 562-573. 10.1061/(ASCE)0733-9399(2002)128:5(562)
31. Yun, Y. C., and, Wu, Y. F. (2011). " Durability of CFRP-concrete joints under freeze-thaw cycling." Cold Reg. Sci. Technol. CRSTDL 0165-232X, 65 (3), 401-412. 10.1016/j.coldregions.2010.11.008
32. Zhou, Y. W., Wu, Y. F., and, Yun, Y. C. (2010). " Analytical modeling of the bond-slip relationship at FRP-concrete interfaces for adhesively-bonded joints." Compos. B Eng. 1359-8368, 41 (6), 423-433. 10.1016/j.compositesb.2010.06.004