Fatigue resistance of basalt fibers-reinforced laminates

Journal of Composite Materials

Volumn 46, Issue 15, 2012, Pages 1773-1785

  Dorigato, A ^a   Pegoretti, A ^a  

^a UNIVERSITY OF TRENTO   (Italy)

Author keywords

basalt fibers; fatigue; Polymer matrix composites (PMCs)

Indexed keywords

AREAL DENSITIES; BASALT FIBER; DAMPING PROPERTY; E-GLASS; FATIGUE BEHAVIOR; POLYMERMATRIX COMPOSITES (PMCS); STRENGTH VALUES; STRUCTURAL COMPOSITES;

BASALT; CARBON FIBERS; FATIGUE OF MATERIALS; POLYMER MATRIX COMPOSITES; REINFORCED PLASTICS;

LAMINATES;

EID: 84864121169     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998311425620     Document Type: Article

References (72)

1. Gay D, Hoa SV, Tsai SW Composite materials. Design and applications. Boca Raton, FL: CRC Press ; 2003
2. Callister WD Materials science and engineering. 3 rd ed. New York, NY: John Wiley and Sons, 1994. 1994
3. Czigany T. Trends in fiber reinforcements-the future belongs to basalt fiber. Express Polym Lett. 2007 ; 1: 59-59
4. Kruckenberg TM, Paton R Resin transfer molding for aerospace structures. Dordrecht, The Netherlands: Kluwer; 1998
5. McCrum NG, Buckley CP, Bucknall CB Principles of polymer engineering. New York, NY: Oxford University Press ; 1989
6. Vladimir K, Vladimir L. Fibres from stone. Int Textile Bull. 2003 ; 5: 48-52
7. Nolf JM. Basalt fibres-fire blocking textiles. Tech Usage Textil. 2003 ; 49: 38-42
8. Saravanan D. Spinning the rocks-basalt fibres. IE(I) Journal-TX. 2006 ; 86: 39-45
9. Milman SB, Velikanova MG, Kotov LE. Developement and study of load bearing heat insulation. Cryogenics. 1996 ; 36: 127-130
10. Wei B, Cao HL, Song SH. Environmental resistance and mechanical performance of basalt and glass fibers. Mater Sci Eng A-Struct Mater Prop Microstruct Process. 2010 ; 527: 4708-4715
11. Subramanian RV, Austin HF. Silane coupling agents in basalt-reinforced polyester composites. Int J Adhes Adhes. 1980 ; 1: 50-54
12. Dias DP, Thaumaturgo C. Fracture toughness of geo-polymeric concretes reinforced with basalt fibres. Cement Concr Compos. 2005 ; 27: 49-54
13. Hansen T. Basalt lined ash pipe still in service after nearly four decades. Power Eng. 2005 ; 109: 70-71
14. Novitskii AG, Sudakov VV. An unwoven basalt-fibre material for the encasing of fibrous insulation: an alternative to glass cloth. Refractor Indust Ceram. 2004 ; 45: 234-241
15. Tropina LV, Vasyhk CG, Kornyushina VL, Dyaglev VM, Rassadin YM, Makarushina MA. New cloth from basalt fibres. Fiber Chem. 1995 ; 27: 67-68
16. Sezemanas G, Keriene J, Sinica M, Lankaitis A, Mikulskis D. The alkali and temperature resistance of some fibres. Mater Sci. 2005 ; 11: 29-35
17. Landucci G, Rossi F, Nicolella C, Zanelli S. Design and testing of innovative materials for passive fire protection. Fire Safety J. 2009 ; 44: 1103-1109
18. Czigany T, Poloskei K, Karger-Kocsis J. Fracture and failure behavior of basalt fiber mat-reinforced vinylester/epoxy hybrid resins as a function of resin composition and fiber surface treatment. J Mater Sci. 2005 ; 40: 5609-5618
19. Hu H, Zhang MX, Fangueiro R, de Araujo M. Mechanical properties of composite materials made of 3D stitched woven-knitted preforms. J Compos Mater. 2010 ; 44: 1753-1767
20. Sun BZ, Niu ZL, Zhu LT, Gu BH. Mechanical behaviors of 2D and 3D basalt fiber woven composites under various strain rates. J Compos Mater. 2010 ; 44: 1779-1795
21. Carmisciano S, De Rosa IM, Sarasini F, Tamburrano A, Valente M. Basalt woven fiber reinforced vinylester composites: flexural and electrical properties. Mater Des. 2011 ; 32: 337-342
22. Liu Q, Shaw MT, Parnas RS, McDonnell A-M. Investigation of basalt fiber composite aging behavior for applications in transportation. Polym Compos. 2006 ; 27: 475-483
23. Park JM, Shin WG, Yoon DJ. A study of interfacial aspects of epoxy-based composites reinforced with dual basalt and SiC fibres by means of the fragmentation and acoustic emission techniques. Compos Sci Technol. 1999 ; 59: 355-370
24. Liu Q, Shaw MT, Parnas RS, McDonnell A-M. Investigation of basalt fiber composite mechanical properties for applications in transportation. Polym Compos. 2006 ; 27: 41-48
25. He CH, Li YB, Zhang ZG, Sun ZJ. Impact damage modes and residual flexural properties of composites beam. J Reinforc Plast Compos. 2008 ; 27: 1163-1175
26. Wang M, Zhang Z, Li Y, Li M, Sun Z. Chemical durability and mechanical properties of alkali-proof basalt fiber and its reinforced epoxy composites. JReinforc Plast Compos. 2008 ; 27: 393-407
27. Cao SH, Wu ZS, Wang X. Tensile properties of CFRP and hybrid FRP composites at elevated temperatures. JCompos Mater. 2009 ; 43: 315-330
28. Mertiny P, Juss K, El Ghareeb MM. Evaluation of glass and basalt fiber reinforcements for polymer composite pressure piping. J Press Vess-T ASME. 2009 ; 131
29. Dehkordi MT, Nosraty H, Shokrieh MM, Minak G, Ghelli D. Low velocity impact properties of intra-ply hybrid composites based on basalt and nylon woven fabrics. Mater Des. 2010 ; 31: 3835-3844
30. Shokrieh MM, Memar M. Stress corrosion cracking of basalt/epoxy composites under bending loading. Appl Compos Mater. 2010 ; 17: 121-135
31. Tang YS, Wu ZS, Yang CQ, Wu G, Shen S. A new type of smart basalt fiber-reinforced polymer bars as both reinforcements and sensors for civil engineering application. Smart Mater Struct. 2010 ; 19: 115001-115014
32. Wu Z, Wang X, Iwashita K, Sasaki T, Hamaguchi Y. Tensile fatigue behaviour of FRP and hybrid FRP sheets. Compos Part B: Eng. 2010 ; 41: 396-402
33. Ozturk S. The effect of fibre content on the mechanical properties of hemp and basalt fibre reinforced phenol formaldehyde composites. J Mater Sci. 2005 ; 40: 4585-4592
34. Li WD, Cao HL, Chen GR, Shi PF. Preparation and characterization of BF reinforced phenolic resin-based composites. J Adv Mater. 2010 ; 42: 67-73
35. Wang QH, Zhang XR, Pei XQ. Study on the friction and wear behavior of basalt fabric composites filled with graphite and nano-SiO2. Mater Des. 2010 ; 31: 1403-1409
36. Zhang X, Pei X, Wang Q. Friction and wear properties of basalt fiber reinforced/solid lubricants filled polyimide composites under different sliding conditions. J Appl Polym Sci. 2009 ; 114: 1746-1752
37. Cerny M, Glogar P, Sucharda Z, Chlup Z, Kotek J. Partially pyrolyzed composites with basalt fibres-mechanical properties at laboratory and elevated temperatures. Compos Part A-Appl Sci Manufact. 2009 ; 40: 1650-1659
38. Glogar P, Cerny M, Tolde Z. Fracture behaviour of the basalt fibre reinforced composites with polysiloxane-derived matrix. Acta Geodyn Geomater. 2007 ; 4: 27-37
39. Matko S, Anna P, Marosi G, Szep A, Keszei S, Czigany T, et al. Use of reactive surfactants in basalt fiber reinforced polypropylene composites. Macromol Symposia. 2003 ; 202: 255-267
40. Czigany T. Special manufacturing and characteristics of basalt fiber reinforced hybrid polypropylene composites: mechanical properties and acoustic emission study. Compos Sci Technol. 2006 ; 66: 3210-3220
41. Jancar J. Effect of interfacial shear strength on the mechanical response of polycarbonate and PP reinforced with basalt fibers. Compos Interfaces. 2006 ; 13: 853-864
42. Vas LM, Poloskei K, Felhos D, Deak T, Czigany T. Theoretical and experimental study of the effect of fiber heads on the mechanical properties of non-continuous basalt fiber reinforced composites. Express Polym Lett. 2007 ; 1: 109-121
43. Czigany T, Deak T, Tamas P. Discontinuous basalt and glass fiber reinforced PP composites from textile prefabricates: effects of interfacial modification on the mechanical performance. Compos Interfaces. 2008 ; 15: 697-707
44. Kracalik M, Pospisil L, Slouf M, Mikesova J, Sikora A, Simonik J, et al. Recycled poly(ethylene terephthalate) reinforced with basalt fibres: rheology, structure, and utility properties. Polym Compos. 2008 ; 29: 437-442
45. Baets J, Devaux J, Verpoest I. Toughening of basalt fiber-reinforced composites with a cyclic butylene terephthalate matrix by a nonisothermal production method. Adv Poly Technol. 2010 ; 29: 70-79
46. Deak T, Czigany T, Marsalkova M, Militky J. Manufacturing and testing of long basalt fiber reinforced thermoplastic matrix composites. Polym Eng Sci. 2010 ; 50: 2448-2456
47. Deak T, Czigany T, Tamas P, Nemeth C. Enhancement of interfacial properties of basalt fiber reinforced nylon 6 matrix composites with silane coupling agents. Express Polym Lett. 2010 ; 4: 590-598
48. Wittek T, Tanimoto T. Mechanical properties and fire retardancy of bidirectional reinforced composite based on biodegradable starch resin and basalt fibres. Express Polym Lett. 2008 ; 2: 810-822
49. Wittek T, Tanimoto T. Biodegradable starch-based resin reinforced with continuous mineral fibres-processing, characterisation and mechanical properties. Adv Compos Mater. 2009 ; 18: 167-185
50. Chen X, Li Y, Gu N. A novel basalt fiber-reinforced polylactic acid composite for hard tissue repair. Biomed Mater. 2010 ; 5
51. De Rosa I, Marra F, Pulci G, Santulli C, Sarasini F, Tirillò J, et al. Post-impact mechanical characterisation of E-glass/basalt woven fabric interply hybrid laminates. Express Polym Lett. 2011 ; 5: 449-459
52. Wang X, Hu B, Feng Y, Liang F, Mo J, Xiong J, et al. Low velocity impact properties of 3D woven basalt/aramid hybrid composites. Compos Sci Technol. 2008 ; 68: 444-450
53. Deak T, Czigany T. Chemical composition and mechanical properties of basalt and glass fibers: a comparison. Textile Res J. 2009 ; 79: 645-651
54. Weibull W. A statistical distribution function of wide applicability. J Appl Mech. 1951 ; 18: 293-297
55. Gurvich M, Di Benedetto A, Pegoretti A. Evaluation of the statistical parameters of a Weibull distribution. JMater Sci. 1997 ; 32: 3711-3716
56. Gurev VV, Neproshin EI, Mostovoi GE. The effect of basalt fiber production technology on mechanical properties of fiber. Glass Ceramics. 2001 ; 58: 62-65
57. Detassis M, Pegoretti A, Migliaresi C. Effect of temperature and strain rate on interfacial shear stress transfer in carbon/epoxy model composites. Compos Sci Technol. 1995 ; 53: 39-46
58. Park JM, Subramanian RV. Interfacial shear-strength and durability improvement by monomeric and polymeric silanes in basalt fiber epoxy single-filament composite specimens. J Adhes Sci Technol. 1991 ; 5: 459-477
59. Park JM, Subramanian RV, Bayoumi AE. Interfacial shear-strength and durability improvement by monomeric and polymeric silanes in single-filament composite specimens of basalt fiber in brittle phenolic and icocyanate resins. J Adhes Sci Technol. 1994 ; 8: 133-150
60. Hofstee J, Van Keulen F. Elastic stiffness analysis of a thermo-formed plain-weave fabric composite Part II: analytical models. Compos Sci Technol. 2000 ; 60: 1249-1261
61. Vassilopoulos AP, Keller T Fatigue of fiber-reinforced composites. London: Springer ; 2011
62. Mandell JF Fatigue of composite materials. Reifsnider KL, ed. Amsterdam: Elsevier ; 1990
63. Mandell JF, Samborsky DD, Cairns DS Fatigue ofcomposite materials and substructures for wind turbine blades. Albuquerque, NM: Sandia National Laboratories ; 2002
64. Chen H-S, Hwang S-F, Chen H-S. Accelerated fatigue properties of unidirectional carbon/epoxy composite materials. Polym Compos. 2006 ; 27: 138-146
65. Chambers AR, Earl JS, Squires CA, Suhot MA. The effect of voids on the flexural fatigue performance of unidirectional carbon fibre composites developed for wind turbine applications. Int J Fatig. 2006 ; 28: 1389-1398
66. Harris B Fatigue in composites. Cambridge: Woodhead Publishing Ltd ; 2003
67. Akynyede O, Mohan R, Kelkar AD, Sankar J. Static and fatigue behavior of epoxy/fiberglass composites hybridized with alumina nanoparticles. J Compos Mater. 2009 ; 43: 769-781
68. Kelkar AD, Tate JS, Bolick R. Structural integrity of aerospace textile composites under fatigue loading. Mater Sci Eng B. 2006 ; 132: 79-84
69. Tate JS, Kelkar AD, Whitcomb JD. Effect of braid angle on fatigue performance of biaxial braided composites. Int J Fatig. 2006 ; 28: 1239-1247
70. O'Brien TK Mechanics of nondestructive testing. New York, NY: Plenum Press ; 1980
71. Chung DDL Carbon fiber composites. Newton, MA: Butterworth-Heinemann ; 1994
72. Razvan A, Bakis CE, Wagnecz L, Reifsnider KL. Infuence of cyclic load ampliutde on damage accumulation and fracture of composite laminates. J Compos Technol Res. 1988 ; 10: 3-10