Microstructural evidence for seismic and aseismic slips along clay-bearing, carbonate faults

Journal of Geophysical Research: Solid Earth

Volumn 122, Issue 5, 2017, Pages 3895-3915

  Smeraglia, Luca ^a   Bettucci, Andrea ^a   Billi, Andrea ^b   Carminati, Eugenio ^a,b   Cavallo, Andrea ^c   Di Toro, Giulio ^d,e,f   Natali, Marco ^a   Passeri, Daniele ^a   Rossi, Marco ^a   Spagnuolo, Elena ^e  

^a SAPIENZA UNIVERSITY OF ROME   (Italy)

^b Istituto Nazionale delle Ricerche   (Italy)

^c Multidisciplinary technology laboratory   (Italy)

^d UNIVERSITY OF MANCHESTER   (United Kingdom)

^e ISTITUTO NAZIONALE DI GEOFISICA E VULCANOLOGIA   (Italy)

^f UNIVERSITY OF PADOVA   (Italy)

Author keywords

carbonate fault; clay; deformation mechanisms; earthquake; rotary experiments; seismic cycle

Indexed keywords

CARBONATE; CLAY; DEFORMATION MECHANISM; EARTHQUAKE; MICROMECHANICS; MICROSTRUCTURE; RHEOLOGY; SEISMICITY; SLIP;

EID: 85019685587     PISSN: 21699313     EISSN: 21699356     Source Type: Journal    
DOI: 10.1002/2017JB014042     Document Type: Article

References (88)

1. Agosta, F., and A. Aydin (2006), Architecture and deformation mechanism of a basin-bounding normal fault in Mesozoic platform carbonates, central Italy, J. Struct. Geol., 28, 1445–1467.
2. Aharonov, E., and R. Katsman (2009), Interaction between pressure solution and clays in stylolite development: Insights from modeling, Am. J. Sci., 309, 607–632.
3. Anzidei, M., and S. Pondrelli (Eds.) (2016), The Amatrice seismic sequence: Preliminary data and results, Ann. Geophys., 59.
4. Balsamo, F., L. Aldega, N. De Paola, I. Faoro, and F. Storti (2014), The signature and mechanics of earthquake ruptures along shallow creeping faults in poorly lithified sediments, Geology, 42, 435–438, doi:10.1130/G35272.1.
5. 36Cl exposure dating, J. Geophys. Res. Solid Earth, 118, 4948–4974, doi:10.1002/jgrb.50299.
6. Ben-Zion, Y., and C. G. Sammis (2013), Shear heating during distributed fracturing and pulverization of rocks, Geology, 41, 139–142.
7. Billi, A. (2003), Solution slip and separations on strike-slip fault zones: Theory and application to the Mattinata fault, Italy, J. Struct. Geol., 25, 703–715.
8. Billi, A., et al. (2006), First results from the CROP-11 deep seismic profile, central Apennines, Italy: Evidence of mid-crustal folding, J. Geol. Soc. London, 163, 583–586, doi:10.1144/0016-764920-002.
9. Boulton, C., L. Yao, D. R. Faulkner, J. Townend, V. G. Toy, R. Sutherland, S. Ma, and T. Shimamoto (2017), High-velocity frictional properties of alpine fault rocks: Mechanical data, microstructural analysis, and implications for rupture propagation, J. Struct. Geol., doi:10.1016/j.jsg.2017.02.003.
10. Bullock, R. J., N. De Paola, R. E. Holdsworth, and J. Trabucho-Alexandre (2014), Lithological controls on the deformation mechanisms operating within carbonate-hosted faults during the seismic cycle, J. Struct. Geol., 58, 22–42.
11. Bullock, R. J., N. De Paola, and R. E. Holdsworth (2015), An experimental investigation into the role of phyllosilicate content on earthquake propagation during seismic slip in carbonate faults, J. Geophys. Res. Solid Earth, 120, 3187–3207, doi:10.1002/2015JB011914.
12. Cavinato, G. P., C. Carusi, M. Dall'asta, E. Miccadei, and T. Piacentini (2002), Sedimentary and tectonic evolution of Plio-Pleistocene alluvial and lacustrine deposits of Fucino Basin (central Italy), Sediment. Geol., 148, 29–59, doi:10.1016/S0037-0738(01)00209-3.
13. Chen, J., A. Niemeijer, L. Yao, and S. Ma (2017), Water vaporization promotes coseismic fluid pressurization and buffers temperature rise, Geophys. Res. Lett., 44, 2177–2185, doi:10.1002/2016GL071932.
14. Chen, X., A. S. Madden, B. R. Bickmore, and Z. E. Reches (2013), Dynamic weakening by nanoscale smoothing during high-velocity fault slip, Geology, 41, 739–742.
15. Chiaraluce, L., et al. (2017), The 2016 Central Italy seismic sequence: A first look at the Mainshocks, aftershocks, and source models, Seismol. Res. Lett., doi:10.1785/0220160221.
16. Ciccotti, M., R. Almagro, and F. Mulargia (2004), Static and dynamic moduli of the seismogenic layer in Italy, Rock Mech. Rock Eng., 37, 229–238.
17. Collettini, C., A. Niemeijer, C. Viti, and C. Marone (2009), Fault zone fabric and fault weakness, Nature, 462, 907–910.
18. Collettini, C., C. Viti, T. Tesei, and S. Mollo (2013), Thermal decomposition along natural carbonate faults during earthquakes, Geology, 41, 927–930.
19. Collettini, C., B. M. Carpenter, C. Viti, F. Cruciani, S. Mollo, T. Tesei, F. Trippetta, L. Valoroso, and L. Chiaraluce (2014), Fault structure and slip localization in carbonate-bearing normal faults: An example from the northern Apennines of Italy, J. Struct. Geol., 67, 154–166, doi:10.1016/j.jsg.2014.07.017.
20. Cosentino, D., P. Cipollari, P. Marsili, and D. Scrocca (2010), Geology of the central Apennines; a regional review, J. Virtual Explor., 36, doi:10.3809/jvirtex.2010.00223.
21. De Paola, N., N. Hirose, T. Mitchell, G. Di Toro, C. Viti, and T. Shimamoto (2011), Fault lubrication and earthquake propagation in thermally unstable rocks, Geology, 39, 35–38, doi:10.1130/G31398.1.
22. Demurtas, M., M. Fondriest, F. Balsamo, L. Clemenzi, F. Storti, A. Bistacchi, and G. Di Toro (2016), Structure of a normal seismogenic fault zone in carbonates: The Vado di Corno fault, Campo Imperatore, central Apennines (Italy), J. Struct. Geol., 90, 185–206, doi:10.1016/j.jsg.2016.08.004.
23. Dieterich, J. (1994), A constitutive law for rate of earthquake production and its application to earthquake clustering, J. Geophys. Res., 99, 2601–2618, doi:10.1029/93JB02581.
24. Di Toro, G., et al. (2010), From field geology to earthquake simulation: A new state-of-the-art tool to investigate rock friction during the seismic cycle (SHIVA), Rend. Lincei, 21, 95–114, doi:10.1007/s12210-010-0097-x.
25. Doglioni, C. (1991), A proposal of kinematic modelling for W-dipping subductions—Possible applications to the Tyrrhenian-Apennines system, Terra Nova, 3(4), 423–434.
26. Ferri, F., G. Di Toro, T. Hirose, and T. Shimamoto (2010), Evidence of thermal pressurization in high-velocity friction experiments on smectite-rich gouges, Terra Nova, 22, 347–353.
27. Fiore, S., F. J. Huertas, F. Huertas, and J. Linares (1995), Morphology of kaolinite crystals synthesized under hydrothermal conditions, Clays Clay Miner., 43, 353–360.
28. Fondriest, M., S. A. F. Smith, G. Di Toro, D. Zampieri, and S. Mittempergher (2012), Fault zone structure and seismic slip localization in dolostones, an example from the Southern Alps, Italy, J. Struct. Geol., 45, 52–67, doi:10.1016/j.jsg.2012.06.014.
29. Fondriest, M., S. A. F. Smith, T. Candela, S. B. Nielsen, K. Mair, and G. Di Toro (2013), Mirror-like faults and power dissipation during earthquakes, Geology, 41, 1175–1178, doi:10.1130/G34641.1.
30. Fondriest, M., S. Aretusini, G. Di Toro, and S. A. Smith (2015), Fracturing and rock pulverization along an exhumed seismogenic fault zone in dolostones: The Foiana Fault Zone (Southern Alps, Italy), Tectonophysics, 654, 56–74.
31. Fondriest, M., M. L. Doan, F. Aben, F. Fusseis, T. M. Mitchell, M. Voorn, M. Secco, and G. Di Toro (2017), Static versus dynamic fracturing in shallow carbonate fault zones, Earth Planet. Sci. Lett., 461, 8–19.
32. Galli, P., F. Galadini, and D. Pantosti (2008), Twenty years of paleoseismology in Italy, Earth-Sci. Rev., 88, 89–117, doi:10.1016/j.earscirev.2008.01.001.
33. Gerbi, C., S. E. Johnson, D. Shulman, and K. Klepeis (2016), Influence of microscale weak zones on bulk strength, Geochem., Geophys., Geosyst., 17, 4064–4077, doi:10.1002/2016GC006551.
34. Gratier, J. P., J. Richard, F. Renard, S. Mittempergher, M. L. Doan, G. Di Toro, J. Hadizadeh, and A. M. Boullier (2011), Aseismic sliding of active faults by pressure solution creep: Evidence from the San Andreas fault Observatory at Depth, Geology, 39, 1131–1134, doi:10.1130/G32073.
35. Gratier, J. P., F. Renard, and B. Vial (2014), Postseismic pressure solution creep: Evidence and time-dependent change from dynamic indenting experiments, J. Geophys. Res. Solid Earth, 119, 2764–2779, doi:10.1002/2013JB010768.
36. Gudmundsson, A. (2004), Effects of Young's modulus on fault displacement, C. R. Geosci., 336, 85–92, doi:10.1016/j.crte.2003.09.018.
37. Hadizadeh, J., S. Mittempergher, J. P. Gratier, F. Renard, G. Di Toro, J. Richard, and H. A. Babaie (2012), A microstructural study of fault rocks from the SAFOD: Implications for the deformation mechanisms and strength of the creeping segment of the San Andreas fault, J. Struct. Geol., 42, 246–260, doi:10.1016/j.jsg.2012.01.011.
38. Hainzl, S., G. B. Brietzke, and G. Zöller (2010), Quantitative earthquake forecasts resulting from static stress triggering, J. Geophys. Res., 115, B11311, doi:10.1029/2010JB007473.
39. Harris, R. A. (2017), Large earthquakes and creeping faults, Rev. Geophys., 55, 169–198, doi:10.1002/2016RG000539.
40. Hausegger, S., W. Kurz, R. Rabitsch, E. Kiechl, and F. J. Brosch (2010), Analysis of the internal structure of a carbonate damage zone: Implications for the mechanisms of fault breccia formation and fluid flow, J. Struct. Geol., 32, 1349–1362.
41. Heaton, T. H. (1990), Evidence for and implications of self healing pulses of slip in earthquake rupture, Phys. Earth Planet. Int., 64, 1–20.
42. Hirono, T., J. Kameda, H. Kanda, W. Tanikawa, and T. Ishikawa (2014), Mineral assemblage anomalies in the slip zone of the 1999 Taiwan Chi-Chi earthquake: Ultrafine particles preserved only in the latest slip zone, Geophys. Res. Lett., 41, 3052–3059, doi:10.1002/2014GL059805.
43. Hua, H., L. Onyebueke, and A. Abatan (2010), Characterizing and modeling mechanical properties of nanocomposites review and evaluation, J. Miner. Mater. Charact. Eng., 9, 275–319.
44. Hurley, D.C., M. Kopycinska-Müller, E.D. Langlois, and N. Barbosa III (2006), Mapping substrate/film adhesion with contact-resonance-frequency atomic force microscopy. Appl. Phys. Lett., 89, 021911.
45. Johanson, I. A., and R. Bürgmann (2005), Creep and quakes on the northern transition zone of the San Andreas fault from GPS and InSAR data, Geophys. Res. Lett., 32, L14306, doi:10.1029/2005GL023150.
46. Kahraman, S., and M. Alber (2006), Estimating unconfined compressive strength and elastic modulus of a fault breccia mixture of weak blocks and strong matrix, Int. J. Rock Mech. Min. Sci., 43, 1277–1287.
47. Kameda, J., Y. Yamamoto, and G. Kimura (2010), Smectite swelling in the Miura–Boso accretionary prism: Possible cause for incipient décollement zone formation, Tectonophysics, 494, 75–84.
48. Li, Q., T. E. Tullis, D. Goldsby, and R. W. Carpick (2011), Frictional ageing from interfacial bonding and the origins of rate and state friction, Nature, 480, 233–236, doi:10.1038/nature10589.
49. w 6.2 Norcia earthquake and its possible relationship with strong seismic hazards, Geophys. Res. Lett., 44, 1320–1328, doi:10.1002/2016GL071958.
50. Meyers, M. A., and K. K. Chawla (2009), Mechanical Behavior of Materials, vol. 2, pp. 1–851, Cambridge Univ. Press, Cambridge, U. K.
51. Morewood, N. C., and G. P. Roberts (2000), The geometry, kinematics and rates of deformation within an en echelon normal fault segment boundary, central Italy, J. Struct. Geol., 22, 1027–1047, doi:10.1016/S0191-8141(00)00030-4.
52. Omori, Y., H. Ikei, Y. Kugimiya, and T. Masuda (2015), Nanometre-scale faulting in quartz under an atomic force microscope, J. Struct. Geol., 79, 75–79.
53. Parlak, Z., and F. L. Degertekin (2008), Contact stiffness of finite size subsurface defects for atomic force microscopy: Three-dimensional finite element modeling and experimental verification, J. Appl. Phys., 103, 114,910–114,918.
54. Passchier, C. W., and R. A. J. Trouw (2005), Microtectonics, pp. 1–353, Springer, Berlin.
55. Passeri, D., A. Bettucci, M. Germano, M. Rossi, A. Alippi, S. Orlanducci, M.L. Terranova, and M. Ciavarella (2005), Effect of tip geometry on local indentation modulus measurement via atomic force acoustic microscopy technique. Rev. Sci. Instrum., 76, 093904.
56. Passeri, D., A. Bettucci, M. Germano, M. Rossi, A. Alippi, A. Fiori, E. Tamburri, S. Orlanducci, M. L. Terranova, and J. J. Vlassak (2007), Local indentation modulus characterization via two contact resonance frequencies atomic force acoustic microscopy, Microelectron. Eng., 84, 490–494.
57. Passeri, D., M. Rossi, and J. J. Vlassak (2013), On the tip calibration for accurate modulus measurement by contact resonance atomic force microscopy, Ultramicroscopy, 128, 32–41, doi:10.1016/j.ultramic.2013.02.003.
58. Passeri, D., M. Reggente, M. Rossi, S. Nunziante Cesaro, V. Guglielmotti, J. J. Vlassak, A. M. De Francesco, R. Scarpelli, M. Hatipoglu, and D. Ajò (2016), Contact resonance atomic force microscopy (CR-AFM) in applied mineralogy: The case of natural and thermally treated diaspore, Eur. J. Mineral., 28, 273.
59. Prasad, M., M. Kopycinska, U. Rabe, and W. Arnold (2002), Measurement of Young's modulus of clay minerals using atomic force acoustic microscopy, Geophys. Res. Lett., 29, 131–134, doi:10.1029/2001GL014054.
60. w 6.0 Amatrice earthquake (central Italy), Geophys. Res. Lett., 44, 2138–2147, doi:10.1002/2016GL071859.
61. Renard, F., J. P. Gratier, and B. Jamtveit (2000), Kinetics of crack-sealing, intergranular pressure solution, and compaction around active faults, J. Struct. Geol., 22, 1395–1407.
62. Renard, F., D. Dysthe, J. Feder, K. Bjørlikke, and B. Jamtveit (2001), Enhanced pressure solution creep rates induced by clay particles: Experimental evidence in salt aggregates, Geophys. Res. Lett., 28, 1295–1298, doi:10.1029/2000GL012394.
63. Rice, J. R. (2006), Heating and weakening of faults during earthquake slip, J. Geophys. Res., 111, B05311, doi:10.1029/2005JB004006.
64. Rowe, C. D., Å. Fagereng, J. A. Miller, and B. Mapani (2012), Signature of coseismic decarbonation in dolomitic fault rocks of the Naukluft Thrust, Namibia, Earth Planet. Sci. Lett., 333, 200–210.
65. Salvini, F., A. Billi, and D. U. Wise (1999), Strike-slip fault-propagation cleavage in carbonate rocks: The Mattinata fault zone, Southern Apennines, Italy, J. Struct. Geol., 21, 1731–1749.
66. Setti, M., L. Marinoni, and A. Lopez-Galindo (2009), Clay mineral assemblage as indicator of hydrothermalism in the basal part of the CP-3 core (Victoria Land Basin, Antartica), Clay Miner., 44, 389–404.
67. Siman-Tov, S., E. Aharonov, A. Sagy, and S. Emmanuel (2013), Nanograins form carbonate fault mirrors, Geology, 41, 703–706.
68. Smeraglia, L., F. Berra, A. Billi, C. Boschi, E. Carminati, and C. Doglioni (2016a), Origin and role of fluids involved in the seismic cycle of extensional faults in carbonate rocks, Earth Planet. Sci. Lett., 450, 292–305, doi:10.1016/j.epsl.2016.06.042.
69. Smeraglia, L., L. Aldega, A. Billi, C. Carminati, and C. Doglioni (2016b), Phyllosilicate injection along extensional carbonate-hosted faults and implications for co-seismic slip propagation: Case studies from the central Apennines, Italy, J. Struct. Geol., 93, 29–50, doi:10.1016/j.jsg.2016.10.003.
70. Smeraglia, L., A. Billi, E. Carminati, A. Cavallo, and C. Doglioni (2017a), Field- to nano-scale evidence for weakening mechanisms along the fault of the 2016 Amatrice and Norcia earthquakes, Italy, Tectonophysics, doi:10.1016/j.tecto.2017.05.014.
71. Smeraglia, L., A. Billi, E. Carminati, A. Cavallo, G. Di Toro, E. Spagnuolo, and F. Zorzi (2017b), Ultra-thin clay layers facilitate seismic slip in carbonate faults, Sci. Rep., 7, 664.
72. Smith, S. A. F., A. Billi, G. Di Toro, and R. Spiess (2011), Microstructures of principal slip zones in limestones, and implications for the seismic cycle (Tre Monti fault, central Appennines, Italy), Pure and Appl. Geophys., 168, 2365–2393, doi:10.1007/s00024-011-0301-7.
73. Smith, S. A. F., G. Di Toro, S. Kim, J. H. Ree, S. Nielsen, A. Billi, and R. Spiess (2013), Coseismic recrystallization during shallow earthquake slip, Geology, 41, 63–66.
74. Smith, S. A. F., S. Nielsen, and G. Di Toro (2015), Strain localization and the onset of dynamic weakening in calcite fault gouge, Earth and Plan. Sci. Lett., 413, 25–36.
75. Smith, S. A. F., J. Griffiths, M. Fondriest, G. Di Toro, and M. Demurtas (2016), “Coseismic foliations” in gouge and cataclasite: Experimental observations and consequences for interpreting the fault rock record, paper presented at EGU General Assembly Conference, Vienna, Abstract 18, 2531.
76. Solum, J. G., S. H. Hickman, D. A. Lockner, D. E. Moore, B. A. van der Pluijm, A. M. Schleicher, and J. P. Evans (2006), Mineralogical characterization of protolith and fault rocks from the SAFOD main hole, Geophys. Res. Lett., 33, L21314, doi:10.1029/2006GL027285.
77. Terakawa, T., A. Zoporowski, B. Galvan, and S. A. Miller (2010), High-pressure fluid at hypocentral depths in the L'Aquila region inferred from earthquake focal mechanisms, Geology, 38, 995–998.
78. Tesei, T., C. Collettini, C. Viti, and M. R. Barchi (2013), Fault architecture and deformation mechanisms in exhumed analogues of seismogenic carbonate-bearing thrusts, J. Struct. Geol., 55, 167–181.
79. Tesei, T., C. Collettini, M. R. Barchi, B. M. Carpenter, and G. Di Stefano (2014), Heterogeneous strength and fault zone complexity of carbonate-bearing thrusts with possible implications for seismicity, Earth Planet. Sci. Lett., 408, 307–318, doi:10.1016/j.epsl.2014.10.021.
80. Tinti, E., L. Scognamiglio, A. Michelini, and M. Cocco (2016), Slip heterogeneity and directivity of the ML 6.0, 2016, Amatrice earthquake estimated with rapid finite-fault inversion, Geophys. Res. Lett., 43, 10,745–10,752, doi:10.1002/2016GL071263.
81. Tong, X., D. T. Sandwell, and B. Smith-Konter (2013), High-resolution interseismic velocity data along the San Andreas fault from GPS and InSAR, J. Geophys. Res. Solid Earth, 118, 369–389, doi:10.1029/2012JB009442.
82. Ujiie, K., A. Tsutsumi, and J. Kameda (2011), Reproduction of thermal pressurization and fluidization of clay-rich fault gouges by high-velocity friction experiments and implications for seismic slip in natural faults, Geol. Soc. London, Spec. Publ., 359, 267–285, doi:10.1144/SP359.15.
83. Valoroso, L., L. Chiaraluce, D. Piccinini, R. Di Stefano, D. Schaff, and F. Waldhauser (2013), Radiography of a normal fault system by 64,000 high-precision earthquake locations: The 2009 L'Aquila (central Italy) case study, J. Geophys. Res. Solid Earth, 118, 1156–1176, doi:10.1002/jgrb.50130.
84. Wibberley, C. A., and T. Shimamoto (2005), Earthquake slip weakening and asperities explained by thermal pressurization, Nature, 436, 689–692.
85. Violay, M., S. Nielsen, E. Spagnuolo, D. Cinti, G. Di Toro, and G. Di Stefano (2013), Pore fluid in experimental calcite-bearing faults: Abrupt weakening and geochemical signature of co-seismic processes, Earth Planet. Sci. Lett., 361, 74–84.
86. w 6.3 L'Aquila earthquake surface rupture measured using a terrestrial laser scanner, Geophys. Res. Lett., 37, L10309, doi:10.1029/2010GL043099.
87. Yamanaka, K. (1996), UFM observation of lattice defects in highly oriented pyrolytic graphite, Thin Solid Films, 273, 116.
88. Zhang, X., C. J. Spiers, and C. J. Peach (2010), Compaction creep of wet granular calcite by pressure solution at 28°C to 150°C, J. Geophys. Res., 115, B09217, doi:10.1029/2008JB005853.