Methods to monitor and quantify (self-) healing in polymers and polymer systems

Self-Healing Polymers: From Principles to Applications

Volumn , Issue , 2013, Pages 335-359

  Bose, Ranjita K ^a   Lafont, Ugo ^a   Vega, Jesús M ^a   Garcia, Santiago J ^a   van der Zwaag, Sybrand ^a  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

Extrinsic healing; Healing efficiency; Intrinsic healing; Kinetics; Mechanical properties; Polymers

Indexed keywords

ENZYME KINETICS; MECHANICAL PROPERTIES;

EXTRINSIC HEALING; INTRINSIC HEALING; POLYMER SYSTEMS;

POLYMERS;

EID: 85018809291     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527670185.ch14     Document Type: Chapter

References (57)

1. Wu, X., Schlangen, E., and Van Der Zwaag, S. (2012) Linking crack tip morphology to tear toughness of hot rolled AA7050 alloys using X-ray computed tomography. Adv. Eng. Mater., 14 (7), 449-456.
2. Miccichè, F., Fischer, H., Varley, R., and van der Zwaag, S. (2008) Moisture induced crack filling in barrier coatings containing montmorillonite as an expandable phase. Surf. Coat. Technol., 202 (14), 3346-3353.
3. Atkins, S., Teems, L., Rowe, W., Selby, P., and Vaughters, R. (1998) Use of C-SAM acoustical microscopy in package evaluations and failure analysis. Microelectron. Reliabil., 38 (5), 773-785.
4. Mookhoek, S.D., Mayo, S.C., Hughes, A.E., Furman, S.A., Fischer, H.R., and Zwaag, S.V.D. (2010) Applying SEMbased X-ray microtomography to observe self-healing in solvent encapsulated thermoplastic materials. Adv. Eng. Mater., 12 (3), 228-234.
5. Blaiszik, B.J., Kramer, S.L.B., Olugebefola, S.C., Moore, J.S., Sottos, N.R., and White, S.R. (2010) Self-healing polymers and composites. Annu. Rev. Mater. Res., 40 (1), 179-211.
6. Andersson, H.M., Keller, M.W., Moore, J.S., Sottos, N.R., and White, S.R. (2007) Self healing polymers and composites, in Self Healing Materials. An Alternative Approach to 20 Centuries of Materials Science (ed. S. van der Zwaag), Springer, Dordrecht, pp. 19-44.
7. Chen, X., Dam, M.A., Ono, K., Mal, A., Shen, H., Nutt, S.R., Sheran, K., and Wudl, F. (2002) A thermally re-mendable cross-linked polymeric material. Science, 295 (5560), 1698-1702.
8. Toohey, K.S., Hansen, C.J., Lewis, J.A., White, S.R., and Sottos, N.R. (2009) Delivery of two-part self-healing chemistry via microvascular networks. Adv. Funct. Mater., 19 (9), 1399-1405.
9. Peterson, A.M., Jensen, R.E., and Palmese, G.R. (2010) Room-temperature healing of a thermosetting polymer using the diels-alder reaction. ACS Appl. Mater. Interfaces, 2 (4), 1141-1149.
10. Brown, E., Sottos, N., and White, S. (2002) Fracture testing of a self-healing polymer composite. Exp. Mech., 42 (4), 372-379.
11. Brown, E.N., White, S.R., and Sottos, N.R. (2004) Microcapsule induced toughening in a self-healing polymer composite. J. Mater. Sci., 39 (5), 1703-1710.
12. Kessler, M.R., Sottos, N.R., and White, S.R. (2003) Self-healing structural composite materials. Compos. A Appl. Sci. Manuf., 34 (8), 743-753.
13. White, S.R., Sottos, N.R., Geubelle, P.H., Moore, J.S., Kessler, M.R., Sriram, S.R., Brown, E.N., and Viswanathan, S. (2001) Autonomic healing of polymer composites. Nature, 409 (6822), 794-797.
14. Rule, J.D., Brown, E.N., Sottos, N.R., White, S.R., and Moore, J.S. (2005) Wax-protected catalyst microspheres for efficient self-healing materials. Adv. Mater., 17 (2), 205-208.
15. Tuncaboylu, D.C., Sahin, M., Argun, A., Oppermann, W., and Okay, O. (2012) Dynamics and large strain behavior of self-healing hydrogels with and without surfactants. Macromolecules, 45 (4), 1991-2000.
16. Murphy, E.B. (2011) The return of photoelastic stress measurements: utilizing birefringence to monitor damage and repair in healable materials. J. Mater. Chem., 21 (5), 1438-1446.
17. Maes, F., Montarnal, D., Cantournet, S., Tournilhac, F., Corte, L., and Leibler, L. (2012) Activation and deactivation of self-healing in supramolecular rubbers. Soft Matter, 8 (5), 1681-1687.
18. Yuan, Y.C., Rong, M.Z., Zhang, M.Q., and Yang, G.C. (2009) Study of factors related to performance improvement of self-healing epoxy based on dual encapsulated healant. Polymer, 50 (24), 5771-5781.
19. Kavitha, A.A., and Singha, N.K. (2009) Click chemistry" in tailor-made polymethacrylates bearing reactive furfuryl functionality: a new class of self-healing polymeric material. ACS Appl. Mater. Interfaces, 1 (7), 1427-1436.
20. Aubert, J.H. (2003) Note: thermally removable epoxy adhesives incorporating thermally reversible diels-alder adducts. J. Adhes., 79 (6), 609-616.
21. Lafont, U., van Zeijl, H., and van der Zwaag, S. (2012) Influence of crosslinkers on the cohesive and adhesive self-healing ability of polysulfide-based thermosets. ACS Appl. Mater. Interfaces, doi: 10.1021/am301879z
22. Qiu, J., van de Ven, M.F.C., Wu, S.P., Yu, J.Y., and Molenaar, A.A.A. (2011) Investigating self healing behaviour of pure bitumen using Dynamic Shear Rheometer. Fuel, 90 (8), 2710-2720.
23. Brown, E.N. (2011) Use of the tapered double-cantilever beam geometry for fracture toughness measurements and its application to the quantification of self-healing. J. Strain Anal. Eng. Des., 46 (3), 167-186.
24. Mauldin, T.C., Leonard, J., Earl, K., Lee, J.K., and Kessler, M.R. (2012) Modified rheokinetic technique to enhance the understanding of microcapsule-based self-healing polymers. ACS Appl. Mater. Interfaces, 4 (3), 1831-1837.
25. Döhler, D., Michael, P., and Binder, W.H. (2012) Autocatalysis in the room temperature copper(I)-catalyzed alkyne-azide "click" cycloaddition of multivalent poly(acrylate)s and poly(isobutylene)s. Macromolecules, 45 (8), 3335-3345.
26. Peterson, A.M., Jensen, R.E., and Palmese, G.R. (2009) Reversibly cross-linked polymer gels as healing agents for epoxy-amine thermosets. ACS Appl. Mater. Interfaces, 1 (5), 992-995.
27. Liu, Q. (2012). Induction healing of porous asphalt concrete (Delft, Delft University of Technology).
28. Trask, R.S., and Bond, I.P. (2006) Biomimetic self-healing of advanced composite structures using hollow glass fibres. Smart Mater. Struct., 15 (3), 704-710.
29. Kalista, S.J., Jr., Ward, T.C., and Oyetunji, Z. (2007) Self-healing of poly(ethylene-comethacrylic acid) copolymers following projectile puncture. Mech. Adv. Mater. Struct., 14 (5), 391-397.
30. Varley, R.J., and Van der Zwaag, S. (2008) Development of a quasi-static test method to investigate the origin of self-healing in ionomers under ballistic conditions. Polym. Test., 27 (1), 11-19.
31. Varley, R.J., and van der Zwaag, S. (2010) Autonomous damage initiated healing in a thermo-responsive ionomer. Polym. Int., 59 (8), 1031-1038.
32. Edwards, S.A., and Roy Choudhury, N. (2004) Variations in surface gloss on rubber-modified thermoplastics: relation to morphological and rheological behavior. Polym. Eng. Sci., 44 (1), 96-112.
33. Zheludkevich, M. (2009) Self-healing anticorrosion coatings, in Self-Healing Materials (ed. S.K. Ghosh), Wiley-VCH Verlag GmbH, p. 101.
34. Ghosh, B., and Urban, M.W. (2009) Self-repairing oxetane-substituted chitosan polyurethane networks. Science, 323 (5920), 1458-1460.
35. Ryntz, R., Abell, B., Pollano, G., Nguyen, L., and Shen, W. (2000) Scratch resistance behavior of model coating systems. J. Coat. Technol., 72 (904), 47-53.
36. Osterhold, M., and Wagner, G. (2002) Methods for characterizing the mar resistance. Prog. Org. Coat., 45 (4), 365-371.
37. Odom, S.A., Caruso, M.M., Finke, A.D., Prokup, A.M., Ritchey, J.A., Leonard, J.H., White, S.R., Sottos, N.R., and Moore, J.S. (2010) Restoration of conductivity with TTF-TCNQ chargetransfer salts. Adv. Funct. Mater., 20 (11), 1721-1727.
38. Caruso, M.M., Schelkopf, S.R., Jackson, A.C., Landry, A.M., Braun, P.V., and Moore, J.S. (2009) Microcapsules containing suspensions of carbon nanotubes. J. Mater. Chem., 19 (34), 6093-6096.
39. Blaiszik, B.J., Kramer, S.L.B., Grady, M.E., Mc Ilroy, D.A., Moore, J.S., Sottos, N.R., and White, S.R. (2012) Autonomic restoration of electrical conductivity. Adv. Mater., 24 (3), 398-401.
40. Losego, M.D., Grady, M.E., Sottos, N.R., Cahill, D.G., and Braun, P.V. (2012) Effects of chemical bonding on heat transport across interfaces. Nat. Mater., 11 (6), 502-506.
41. Liu, Q., Wang, X., Yu, B., Zhou, F., and Xue, Q. (2012) Self-healing surface hydrophobicity by consecutive release of hydrophobic molecules from mesoporous silica. Langmuir, 28 (13), 5845-5849.
42. Wang, X., Liu, X., Zhou, F., and Liu, W. (2011) Self-healing superamphiphobicity. Chem. Commun., 47 (8), 2324-2326.
43. Dikic, T., Ming, W., van Benthem, R.A.T.M., Esteves, A.C.C., and de With, G. (2012) Self-replenishing surfaces. Adv. Mater., 24 (27), 3701-3704.
44. Hsiao, E., Barthel, A.J., and Kim, S.H. (2011) Effects of nanoscale surface texturing on self-healing of boundary lubricant film via lateral flow. Tribol. Lett., 44 (2), 287-292.
45. Valefi, M., de Rooij, M., Schipper, D.J., and Winnubst, L. (2012) Effect of temperature on friction and wear behaviour of CuO-zirconia composites. J. Eur. Ceram. Soc., 32 (10), 2235-2242.
46. Hsiao, E., Kim, D., and Kim, S.H. (2009) Effects of Ionic side groups attached to polydimethylsiloxanes on lubrication of silicon oxide surfaces. Langmuir, 25 (17), 9814-9823.
47. Sauvant-Moynot, V., Gonzalez, S., and Kittel, J. (2008) Self-healing coatings: an alternative route for anticorrosion protection. Prog. Org. Coat., 63 (3), 307-315.
48. Cho, S.H., White, S.R., and Braun, P.V. (2009) Self-healing polymer coatings. Adv. Mater., 21 (6), 645-649.
49. Shchukin, D.G., Zheludkevich, M., Yasakau, K., Lamaka, S., Ferreira, M.G.S., and Mohwald, H. (2006) Layer-by-layer assembled nanocontainers for selfhealing corrosion protection. Adv. Mater., 18 (13), 1672-1678.
50. Garcia, S.J., Fischer, H.R., White, P.A., Mardel, J., Gonzalez-Garcia, Y., Mol, J.M.C., and Hughes, A.E. (2011) Self-healing anticorrosive organic coating based on an encapsulated water reactive silyl ester: synthesis and proof of concept. Prog. Org. Coat., 70 (2-3), 142-149.
51. Mehta, N.K., and Bogere, M.N. (2009) Environmental studies of smart/ self-healing coating system for steel. Prog. Org. Coat., 64 (4), 419-428.
52. González-García, Y., García, S.J., Hughes, A.E., and Mol, J.M.C. (2011) A combined redox-competition and negative-feedback SECM study of self-healing anticorrosive coatings. Electrochem. Commun., 13 (10), 1094-1097.
53. Jorcin, J.B., Scheltjens, G., Van Ingelgem, Y., Tourwé, E., Van Assche, G., De Graeve, I., Van Mele, B., Terryn, H., and Hubin, A. (2010) Investigation of the self-healing properties of shape memory polyurethane coatings with the "odd random phase multisine" electrochemical impedance spectroscopy. Electrochim. Acta, 55 (21), 6195-6203.
54. Lamaka, S.V., Zheludkevich, M.L., Yasakau, K.A., Montemor, M.F., Cecílio, P., and Ferreira, M.G.S. (2006) TiOx self-assembled networks prepared by templating approach as nanostructured reservoirs for self-healing anticorrosion pre-treatments. Electrochem. Commun., 8 (3), 421-428.
55. Lamaka, S.V., Zheludkevich, M.L., Yasakau, K.A., Montemor, M.F., and Ferreira, M.G.S. (2007) High effective organic corrosion inhibitors for 2024 aluminium alloy. Electrochim. Acta, 52 (25), 7231-7247.
56. Gonzalez-Garcia, Y., Mol, J.M.C., Muselle, T., De Graeve, I., Van Assche, G., Scheltjens, G., Van Mele, B., and Terryn, H. (2011) SECM study of defect repair in self-healing polymer coatings on metals. Electrochem. Commun., 13 (2), 169-173.
57. White, S.R., and Geubelle, P.H. (2010) Self-healing materials: get ready for repair-and-go. Nat. Nanotechnol., 5 (4), 247-248.