Vehicle emission factors of solid nanoparticles in the laboratory and on the road using Portable Emission Measurement Systems (PEMS)

Frontiers in Environmental Science

Volumn 3, Issue DEC, 2015, Pages

  Giechaskiel, Barouch ^a   Riccobono, Francesco ^a   Vlachos, Theodoros ^a   Mendoza Villafuerte, Pablo ^a   Suarez Bertoa, Ricardo ^a   Fontaras, Georgios ^a   Bonnel, Pierre ^a   Weiss, Martin ^a  

^a JOINT RESEARCH CENTRE   (Italy)

Author keywords

Cold start; Nucleation mode; Particle number; PMP; RDE; Real Driving Emissions; Regeneration; WLTC tests

Indexed keywords

EID: 84994307260     PISSN: None     EISSN: 2296665X     Source Type: Journal    
DOI: 10.3389/fenvs.2015.00082     Document Type: Article

References (99)

1. Aakko, P., and Nylund, N. (2003). Particle Emissions at Moderate and Cold Temperatures using Different Fuels. SAE Technical Paper doi: 10.4271/2014-01-2826
2. Andersson, J., May, J., Favre, C., Bosteels, D., de Vries, S., Heaney, M., et al. (2014). On-road and chassis dynamometer evaluations of emissions from two Euro 6 diesel vehicles. SAE Int. J. Fuel Lubr. 7, 919-934.
3. Armas, O., Garcia-Contreras, R., and Ramos, A. (2013). Emissions of light duty vehicle tested under urban and extra-urban real-world driving conditions with diesel, animal fat biodiesel and GTL fuels. SAE Technical Paper 2013-24-0176.
4. Barrios, C., Domínguez-Sáez, A., Rubio, J., and Pujadas, M. (2012). Factors influencing the number distribution and size of the particles emitted from a modern diesel vehicle in real urban traffic. Atmos. Environ. 56, 16-25. doi: 10.1016/j.atmosenv.2012.03.078
5. Beddows, D., and Harrison, R. (2008). Comparison of average particle number emission factors for heavy and light duty vehicles derived from rolling chassis dynamometer and field studies. Atmos. Environ. 42, 7954-7966. doi: 10.1016/j.atmosenv.2008.06.021
6. Bergmann, M., Kirchner, U., Vogt, R., and Benter, T. (2009). On-road and laboratory investigation of low-level PM emissions of a modern diesel particulate filter equipped diesel passenger car. Atmos. Environ. 43, 1908-1916. doi: 10.1016/j.atmosenv.2008.12.039
7. Bonnel, P., Brunella, A., Carriero, M., Fumagalli, I., Kubelt, J., Manfredi, U., et al. (2006). European Project on Portable Emissions Measurement Systems: EU PEMS. Ispra: EU Report EUR 22143 EN.
8. Bonnel, P., Kubelt, J., and Provenza, A. (2011). Heavy-Duty Engines Conformity Testing Based on PEMS - Lessons Learned from the European Pilot Program. Ispra: EU Report 24921.
9. Boulter, P., and McCrae, I. (2007). The Links Between Micro-Scale Traffic, Emission and Air Pollution Models. Transport Research Laboratory Project Report PPR 269.
10. Braisher, M., Stone, R., and Price, P. (2010). Particle number emissions from a range of european vehicles. SAE Technical Paper doi: 10.4271/2010-01-0786
11. Casati, R., Scheer, V., Vogt, R., and Benter, T. (2007). Measurement of nucleation and soot mode particle emission from a diesel passenger car in real world and laboratory in situ dilution. Atmos. Environ. 41, 2125-2135. doi: 10.1016/j.atmosenv.2006.10.078
12. Chan, T., Meloche, E., Kubsh, J., Brezny, R., Rosenblatt, D., and Rideout, G. (2013). Impact of ambient temperature on gaseous and particle emissions from a direct injection gasoline vehicle and its implications on particle filtration. SAE Int. J. Fuel Lubr. 6, 350-371. doi: 10.4271/2013-01-0527
13. Clark, N., Kern, J., Atkinson, C., and Nine, R. (2002). Factors affecting heavy-duty diesel vehicle emissions. J. Air Waste Manag. Assoc. 52, 84-94. doi: 10.1080/10473289.2002.10470755
14. EC (2007). Regulation (EC) No 715/2007 of the European parliament and of the council of 20 June 2007 "on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro5 and Euro6) and on access to vehicle repair and maintenance information." Off. J. Eur. Union L 171, 1-16.
15. EC (2009). Regulation (EC) no 595/2009 of the European parliament and of the Council of 18 June 2009 "on type-approval of motor vehicles and engines with respect to emissions from heavy-duty vehicles (EuroVI) and on access to vehicle repair and maintenance information and amending Regulation (EC) no. 715/2007 and directive 2007/46/EC and repealing directives 80/1269/EEC, 2005/55/EC and 2005/78/EC". Off. J. Eur. Union L 188, 1-13.
16. EC (2011). Commission Regulation (EU) No 582/2011 of 25 May 2011 "implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy-duty vehicles (EuroVI) and amending Annexes I and III to directive 2007/46/ECof the European parliament and of the council". Off. J. Eur. Union L 167, 1-168.
17. EC (2012). Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions. Cars 2020: Action Plan for a competitive and sustainable automotive industry in Europe. (2012), COM. Available online at: http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=COM:2012:0636:FIN:EN:PDF
18. EEA (2014). Air Quality in Europe - 2014. Copenhagen: EEA Report No, 5/2014.
19. EMEP/EEA (2013). Air Pollutant Emission Inventory Guidebook. Copenhagen: European Monitoring and Evaluation Programme/European Environment Agency, 2013.
20. EPA (2008). Determination of PEMS Measurement Allowances for Gaseous Emissions Regulated Under the Heavy-Duty Diesel Engine in-use Testing Program. United States Environmental Protection Agency, Revised Final report. Available online at: http://www.epa.gov/otaq/regs/hd-hwy/inuse/420r08005.pdf
21. EPA (2009). Integrated Science Assessment for Particulate Matter (Final Report). Washington, DC: U.S. Environmental Protection Agency. EPA/600/R-08/139F, 2009.
22. EPA (2014). Emission Adjustments for Temperature, Humidity, Air Conditioning, and Inspection and Maintenance for on-road Vehicles in MOVES2014. Washington, DC. Report EPA-420-R-14-012.
23. Fierz, M., Burtscher, H., Steigmeier, P., and Kasper, M. (2008). Field measurement of particle size and number concentration with the diffusion size classifier (DISC). SAE Technical Paper 2008-01-1179.
24. Fontaras, G., Franco, V., Dilara, P., Martini, G., and Manfredi, U. (2014). Development and review of Euro 5 passenger car emission factors based on experimental results over various driving cycles. Sci. Total Environ. 468-469, 1034-1042. doi: 10.1016/j.scitotenv.2013.09.043
25. Franco, V., Kousoulidou, M., Muntean, M., Ntziachristos, L., Hausberger, S., and Dilara, P. (2013). Road vehicle emission factors development: a review. Atmos. Environ. 70, 84-97. doi: 10.1016/j.atmosenv.2013.01.006
26. Franco, V., Sanchez, F., German, J., and Mock, P. (2014). Real-World Exhaust Emissions from Modern Diesel Cars. A meta-Analysis of PEMS Emissions Data from EU (Euro 6) and US (Tier 2 bin 5/ULEV ii) Diesel Passenger Cars. Berlin: ICCT-The International Council on Clean Transportation.
27. Giechaskiel, B., Arndt, M., Schindler, W., Bergmann, A., Silvis, W., and Drossinos, Y. (2012b). Sampling of non-volatile vehicle exhaust particles: a simplified guide. SAE Int. J. Engines 5, 379-399. doi: 10.4271/2012-01-0443
28. Giechaskiel, B., Carriero, M., Martini, G., Bergmann, A., Pongratz, H., and Jörgl, H. (2010b). Comparison of particle number measurements from the full dilution tunnel, the tailpipe and partial flow systems. SAE Int. J. Fuel Lubr. 2, 512-530.
29. Giechaskiel, B., Cresnoverh, M., Jörgl, H., and Bergmann, A. (2010a). Calibration and accuracy of a particle number measurement system. Meas. Sci. Technol. 21, 045102. doi: 10.1088/0957-0233/21/4/045102
30. Giechaskiel, B., Dilara, P., and Andersson, J. (2008a). Particle Measurement Programme (PMP) light-duty inter-laboratory exercise: repeatability and reproducibility of the particle number method. Aerosol Sci. Technol. 42, 528-543. doi: 10.1080/02786820802220241
31. Giechaskiel, B., Dilara, P., Sandbach, E., and Andersson, J. (2008b). Particle Measurement Programme (PMP) light-duty inter-laboratory exercise: comparison of different particle number measurement systems. Meas. Sci. Technol. 19:095401. doi: 10.1088/0957-0233/19/9/095401
32. Giechaskiel, B., Mamakos, A., Andersson, J., Dilara, P., Martini, G., Schindler, W., et al. (2012a). Measurement of automotive non-volatile particle number emissions within the European legislative framework: a review. Aerosol Sci. Technol. 46, 719-749. doi: 10.1080/02786826.2012.661103
33. Giechaskiel, B., Manfredi, U., and Martini, G. (2014c). Engine exhaust solid sub-23 nm particles: I. literature survey. SAE Int. J. Fuels Lubr. 7, 950-964. doi: 10.4271/2014-01-2834
34. Giechaskiel, B., Maricq, M., Ntziachristos, L., Dardiotis, C., Wang, X., Axmann, H., et al. (2014a). Review of motor vehicle particulate matter emissions sampling and measurement: from smoke and filter mass to particle number. J. Aerosol Sci. 67, 48-86. doi: 10.1016/j.jaerosci.2013.09.003
35. Giechaskiel, B., Massimo, C., Bonnel, P., Schindler, W., Scheder, D., Bassoli, C., et al. (2011). PEMS feasibility of particulate mass and number measurement with portable emission measurement systems (PEMS) for in-use testing. SAE Technical Paper 2011-24-0199.
36. Giechaskiel, B., Munoz-Bueno, R., Rubino, L., Manfredi, U., Dilara, P., De Santi, G., et al. (2007b). Particle measurement programme (PMP): particle size and number emissions before, during and after regeneration events of a euro 4 DPF equipped light-duty diesel vehicle. SAE Technical Paper 2007-01-1944.
37. Giechaskiel, B., Ntziachristos, L., Samaras, Z., Casati, R., Scheer, V., and Vogt, R. (2005). Formation potential of vehicle exhaust nucleation mode particles onroad and in the laboratory. Atmos. Environ. 39, 3191-3198. doi: 10.1016/j.atmosenv.2005.02.019
38. Giechaskiel, B., Ntziachristos, L., Samaras, Z., Casati, R., Volker, S., and Rainer, V. (2007a). Effect of speed and speed transition on the formation of nucleation mode particles from a light-duty diesel vehicle. SAE Technical Paper 2007-01-1110.
39. Giechaskiel, B., Riccobono, F., and Bonnel, P. (2014b). Feasibility Study on the Extension of the Real Driving Emissions (RDE) Procedure to Particle Number (PN): Experimental Evaluation of Portable Emission Measurement Systems (PEMS) with Diffusion Chargers (DCs) to Measure Particle Number (PN) Concentration. JRC Report 26997, Ispra.
40. Giechaskiel, B., Riccobono, F., and Bonnel, P. (2015). Feasibility Study on the Extension of the Real Driving Emissions (RDE) Procedure to Particle Number (PN): Chassis Dynamometer Evaluation of Portable Emission Measurement Systems (PEMS) to Measure Particle Number (PN) Concentration: Phase II. Ispra: EU Report 27451.
41. Giechaskiel, B., Wang, X., Horn, H., Spielvogel, J., Gerhart, C., Southgate, J., et al. (2009). Calibration of condensation particle counters for legislated vehicle number emission measurements. Aerosol Sci. Technol. 43, 1164-1173. doi: 10.1080/02786820903242029
42. Hallquist, Å., Jerksjö, M., Fallgren, H., Westerlund, J., and Sjödin., Å (2013). Particle and gaseous emissions from individual diesel and CNG buses. Atmos. Chem. Phys. 13, 5337-5350. doi: 10.5194/acp-13-5337-2013
43. HEI (2013). Understanding the Health Effects of Ambient Ultrafine Particles. HEI Perspectives 3. Health Effects Institute Review Panel on Ultrafine Particles.
44. Huang, C., Lou, D., Hu, Z., Feng, H., Chen, Y., Chen, C., et al. (2013). A PEMS study of the emissions of gaseous pollutants and ultrafine particles from gasoline- and diesel-fueled vehicles. Atmos. Environ. 77, 703-710. doi: 10.1016/j.atmosenv.2013.05.059
45. Isella, L., Giechaskiel, B., and Drossinos, Y. (2008). Diesel-exhaust aerosol dynamics from the tailpipe to the dilution tunnel. J. Aerosol Sci. 39, 737-758. doi: 10.1016/j.jaerosci.2008.04.006
46. Jackson, E., Qu, Y., Holmén, B., and Aultman-Hall, L. (2006). Driver and road type effects on light-duty gas and particulate emissions. Transport. Res. Rec. J. Transport. Res. Board 1987, 118-127. doi: 10.3141/1987-13
47. Ježek, I., Drinovec, L., Ferrero, L., Carriero, M., and Moènik, G. (2015). Determination of car on-road black carbon and particle number emission factors and comparison between mobile and stationary measurements. Atmos. Meas. Tech. 8, 43-55. doi: 10.5194/amt-8-43-2015
48. Johnson, K. C., Durbin, T. D., Jung, H., Chaudhary, A., Cocker, D. R., Herner, J. D., et al. (2009b). Evaluation of the European PMP methodologies during on-road and chassis dynamometer testing for DPF equipped heavy-duty diesel vehicles. Aerosol Sci. Technol. 43, 962-969. doi: 10.1080/02786820903074810
49. Johnson, K., Durbin, T., Cocker, D., Miller, W., Bishnu, D., Maldonado, H., et al. (2009a). On-road comparison of a portable emission measurement system with a mobile reference laboratory for a heavy-duty diesel vehicle. Atmos. Environ. 43, 2877-2883. doi: 10.1016/j.atmosenv.2009.03.019
50. Johnson, K., Durbin, T., Jung, H., Cocker, D. R. III, Bishnu, D., and Giannelli, R. (2011). Quantifying in-use PM measurements for heavy duty diesel vehicles. Environ. Sci. Technol. 45, 6073-6079. doi: 10.1021/es104151v
51. Keogh, D., and Sonntag, D. (2011). Challenges and approaches for developing ultrafine particle emission inventories for motor vehicle and bus fleets. Atmosphere 2, 36-56. doi: 10.3390/atmos2020036
52. Keogh, D., Kelly, J., Mengersen, K., Jayaratne, R., Ferreira, L., and Morawska, L. (2010). Derivation of motor vehicle tailpipe particle emission factors suitable for modelling urban fleet emissions and air quality assessments. Environ. Sci. Pollut. Res. 17, 724-739. doi: 10.1007/s11356-009-0210-9
53. Khalek, I., Kittelson, D., and Brear, F. (1999). The influence of dilution conditions on diesel exhaust particle size distribution measurements. SAE Technical Paper 1999-01-1142.
54. Kittelson, D., Johnson, J., Watts, W., Wei, Q., Drayton, M., and Paulsen, D. (2000). Diesel aerosol sampling in the atmosphere. SAE Technical Paper 2000-01-2212.
55. Kittelson, D., Watts, W., and Johnson, J. (2006a). On-road and laboratory evaluation of combustion aerosols. Part 1: summary of diesel engine results. J. Aerosol Sci. 37, 913-930. doi: 10.1016/j.jaerosci.2005.08.005
56. Kittelson, D., Watts, W., Johnson, J., Schauer, J., and Lawson, D. (2006b). On-road and laboratory evaluation of combustion aerosols Part 2: summary of spark ignition engine results. J. Aerosol Sci. 37, 931-949. doi: 10.1016/j.jaerosci.2005.08.008
57. Kumar, P., Morawska, L., Birmili, W., Paasonen, P., Hu, M., Kulmala, M., et al. (2014). Ultrafine particles in cities. Environ. Int. 66, 1-10. doi: 10.1016/j.envint.2014.01.013
58. Li, T., Chen, X., and Yan, Z. (2013). Comparison of fine particles emissions of light-duty gasoline vehicles from chassis dynamometer tests and on-road measurements. Atmos. Environ. 68, 82-91. doi: 10.1016/j.atmosenv.2012.11.031
59. Liu, Z., Ge, Y., Johnson, K., Shah, A., Tan, J., Wang, C., et al. (2011). Real-world operation conditions and on-road emissions of Beijing diesel buses measured by using portable emission measurement system and electric low-pressure impactor. Sci. Total Environ. 409, 1476-1480. doi: 10.1016/j.scitotenv.2010.12.042
60. Mamakos, A., Bonnel, P., Perujo, A., and Carriero, M. (2013a). Assessment of portable emission measurement systems (PEMS) for heavy-duty diesel engines with respect to particulate matter. J. Aerosol Sci. 57, 54-70. doi: 10.1016/j.jaerosci.2012.10.004
61. Mamakos, A., Dardiotis, C., and Martini, G. (2012). Assessment of Particle Number Limits for Petrol Vehicles. Ispra: EU Report 25592 EN.
62. Mamakos, A., Martini, G., and Manfredi, U. (2013b). Assessment of the legislated particle number measurement procedure for a Euro5 and a Euro6 compliant diesel passenger cars under regulated and unregulated conditions. J. Aerosol Sci. 55, 31-47. doi: 10.1016/j.jaerosci.2012.07.012
63. Maricq, M., Podsiadlik, D., and Chase, R. (1999). Examination of the size-resolved and transient nature of motor vehicle particle emissions. Environ. Sci. Technol. 33, 1618-1626. doi: 10.1021/es9808806
64. Martini, G., Giechaskiel, B., and Dilara, P. (2009). Future European emission standards for vehicles: the importance of the UN-ECE particle measurement program. Biomarkers 14, 29-33. doi: 10.1080/13547500902965393
65. May, J., Bosteels, D., and Favre, C. (2014). An assessment of emissions from light-duty vehicles using PEMS and chassis dynamometer testing. SAE Int. J. Engines 7, 1326-1335. doi: 10.4271/2014-01-1581
66. Mellios, G., Hausberger, S., Keller, M., Samaras, Z., and Ntziachristos, L. (2011). Parameterisation of Fuel Consumption and CO2 Emissions of Passenger Cars and Light Commercial Vehicles for Modelling Purposes. JRC Report 24927, Ispra.
67. Mendoza-Villafuerte, P., Perujo, A., Bonnel, P., Carriero, M., Forni, F., and Riccobono, F. (2015). EU-PEMS PM Pilot Program: Testing, Data Analysis and Results. JRC Report 27326, Ispra.
68. Merkisz, J., Pielecha, J., and Gis, W. (2009). Gaseous and particle emissions results from light duty vehicle with diesel particle filter. SAE Technical Paper 2009-01-2630.
69. Mock, P., German, J., Bandivadekar, A., Riemersma, I., Ligterink, N., and Lambrecht, U. (2013). From Laboratory to Road: A Comparison of Official and 'Real-World' Fuel Consumption and CO2 Values for Cars in Europe and the United States. ICCT White Paper. Berlin: The International Council on Clean Transportation.
70. Morawska, L., Ristovski, Z., Jayaratne, E., Keogh, D., and Ling, X. (2008). Ambient nano and ultrafine particles from motor vehicle emissions: characteristics, ambient processing and implications on human exposure. Atmosp. Environ. 42, 8113-8138. doi: 10.1016/j.atmosenv.2008.07.050
71. Ntziachristos, L., and Galassi, M. (2014). Emission Factors for New and Upcoming Technologies in Road Transport. JRC Report 26952, Ispra.
72. Ntziachristos, L., Mamakos, A., Samaras, Z., Rexeis, M., and Hausberger, S. (2006). Diesel particle exhaust emissions from light duty vehicles and heavy duty engines. SAE Technical Paper 2006-01-0866.
73. Oberdörster, G. (2000). Toxicology of ultrafine particles: in vivo studies. Philos. Trans. R. Soc. A 258, 2719-2740. doi: 10.1098/rsta.2000.0680
74. Oberdörster, G., Sharp, Z., Atudorei, V., Elder, A., Gelein, R., Kreyling, W., et al. (2004). Translocation of inhaled ultrafine particles to the brain. Inhal. Toxicol. 16, 437-445. doi: 10.1080/08958370490439597
75. Pant, P., and Harrison, R. (2013). Estimation of the contribution of road traffic emissions to particulate matter concentrations from field measurements: a review. Atmos. Environ. 77, 78-97. doi: 10.1016/j.atmosenv.2013.04.028
76. Peckham, M., Finch, A., Cambell, B., Price, P., and Davies, M. (2011). Study of Particle Number Emissions from a Turbocharged Gasoline Direct Injection (GDI) Engine Including Data from a Fast Response Particle Size Spectrometer. SAE Technical Paper 2011-01-1224.
77. Pelkmans, L., and Debal, P. (2006). Comparison of on-road emissions with emissions measured on chassis dynamometer test cycles. Transport. Res. D 11, 233-241. doi: 10.1016/j.trd.2006.04.001
78. Perujo, A., and Mendoza-Villafuerte, P. (2015). PEMS Emissions Testing of Heavy Duty Vehicles/Engines: Assessment of PEMS Procedures in Fulfilment of Article 14(3) to Regulation (EU) 582/2011. JRC Report 27251, Ispra.
79. Pope, C. A. III. (2000). Epidemiology of fine particulate air pollution and human health: biologic mechanisms and who's at risk? Environ. Health Perspect. 108, 713-723. doi: 10.2307/3454408
80. Ristimäki, J., Keskinen, J., Virtanen, A., Maricq, M., and Aakko, P. (2005). Cold temperature PM emissions measurement: method evaluation and application to light duty vehicles. Environ. Sci. Technol. 39, 9424-9430. doi: 10.1021/es050578e
81. Rönkkö, T., Virtanen, A., Vaaraslahti, K., Keskinen, J., Pirjola, L., and Lappi, M. (2006). Effect of dilution conditions and driving parameters on nucleation mode particles in diesel exhaust: laboratory and on-road study. Atmos. Environ. 40, 2893-2901. doi: 10.1016/j.atmosenv.2006.01.002
82. Rubino, L., Bonnel, P., Hummel, R., Krasenbrink, A., Manfredi, U., De Santi, G., et al. (2007). PEMS light duty vehicles application: experiences in downtown milan. SAE Technical Paper 2007-24-0113.
83. Sager, T., and Castranova, V. (2009). Surface area of particle administered versus mass in determining the pulmonary toxicity of ultrafine and fine carbon black: comparison to ultrafine titanium dioxide. Part. Fibre Toxicol. 6:15. doi: 10.1186/1743-8977-6-15
84. Sundvor, I., Castell Balaguer, N., Viana, M., Querol, X., Reche, C., Amato, F., et al. (2012). Road Traffic's Contribution to Air Quality in European Cities. Bilthoven: The European Topic Centre on Air Pollution and Climate Change Mitigation, ETC/ACM Technical Paper, 2012/14.
85. Tietge, U., Zacharof, N., Mock, P., Franco, V., German, J., Bandivadekar, A., et al. (2015). From laboratory to road: a 2015 update of official and "real-world" fuel consumption and CO2 values for passenger cars in Europe. ICCT white paper.
86. UN/ECE, Regulation 49. (2013). Addendum 48: Regulation No. 49, Revision 6. UNECE - United Nations - Economic Commissions for Europe. Available online at: http://www.unece.org/fileadmin/DAM/trans/main/wp29/wp29regs/2013/R049r6e.pdf
87. UN/ECE (2015). Addendum 82: Regulation No. 83, Revision 5. UNECE - United Nations - Economic Commission for Europe. Available online at: http://www.unece.org/fileadmin/DAM/trans/main/wp29/wp29regs/R083r5e.pdf.
88. Vlachos, T., Bonnel, P., Perujo, A., Weiss, M., Mendoza-Villafuerte, P., and Riccobono, F. (2014). In-use emissions testing with portable emissions measurement systems (PEMS) in the current and future European vehicle emissions legislation: overview, underlying principles and expected benefits. SAE Int. J. Commer. Veh. 7, 199-215. doi: 10.4271/2014-01-1549
89. Vogt, R., Scheer, V., Casati, R., and Bender, T. (2003). On-road measurement of particle emission in the exhaust plume of a diesel passenger car. Environ. Sci. Technol. 37, 4070-4076. doi: 10.1021/es0300315
90. Wang, J., Storey, J., Domingo, N., Huff, S., Thomas, J., and West, B. (2006). Studies of diesel engine particle emissions during transient operations using an engine exhaust particle sizer. Aerosol Sci. Technol. 40, 1002-1015. doi: 10.1080/02786820600919408
91. Wehner, B., Uhrner, U., von Löwis, S., Zallinger, M., and Wiedensohler, A. (2009). Aerosol number size distributions within the exhaust plume of a diesel and a gasoline passenger car under on-road conditions and determination of emission factors. Atmos. Environ. 43, 1235-1245. doi: 10.1016/j.atmosenv.2008.11.023
92. Weiss, M., Bonnel, P., Hummel, R., Manfredi, U., Colombo, R., Lanappe, G., et al. (2011b). Analyzing On-Road Emissions of Light-Duty Vehicles with Portable Emission Measurement Systems (PEMS). JRC report 24697, Ispra.
93. Weiss, M., Bonnel, P., Hummel, R., Provenza, A., and Manfredi, U. (2011a). On-road emissions of light-duty vehicles in Europe. Environ. Sci. Technol. 45, 8575-8581. doi: 10.1021/es2008424
94. Weiss, M., Bonnel, P., Hummel, R., and Steininger, N. (2013). A Complementary Emissions Test for Light-Duty Vehicles: Assessing the Technical Feasibility of Candidate Procedures. Conclusions of the Real Driving Emissions - Light Duty Vehicles (RDE-LDV) Working Group. JRC Report 25572, Ispra.
95. Weiss, M., Bonnel, P., Provenza, A., Lambrecht, U., Alessandrini, S., Carriero, M., et al. (2012): Will Euro 6 reduce the NOx emissions of new diesel cars? Preliminary conclusions from on-road emissions tests with Portable Emission Measurement Systems (PEMS). Atmos. Environ. 62, 657-665. doi: 10.1016/j.atmosenv.2012.08.056.
96. WHO (2013). Review of Evidence on Health Aspects of Air Pollution - REVIHAAP Project. WHO Technical Report, World Health Organization, Regional Office for Europe, Copenhagen, Denmark.
97. Witze, P., and Green, R. (2005). Comparison of single and dual spray fuel injectors during cold start of a PFI spark ignition engine using visualization of liquid fuel films and pool fires. SAE Technical Paper 2005-01-3863.
98. Zacharof, N., Fontaras, G., Tsiakmakis, S., Ciuffo, B., Codrea, C., and Anagnostopoulos, K. (2015). Review of in use Factors Affecting the Fuel Consumption and CO2 Emissions of Passenger Cars. Ispra: EU Report.
99. Zheng, Z., Durbin, T., Xue, J., Johnson, K., Li, Y., Hu, S., et al. (2014). Comparison of particle mass and solid particle number (SPN) emissions from a heavy-duty diesel vehicle under on-road driving conditions and a standard testing cycle. Environ. Sci. Technol. 48, 1779-1786. doi: 10.1021/es403578b