Assessment of portable emission measurement systems (PEMS) for heavy-duty diesel engines with respect to particulate matter

Journal of Aerosol Science

Volumn 57, Issue , 2013, Pages 54-70

  Mamakos, Athanasios ^a   Bonnel, Pierre ^a   Perujo, Adolfo ^a   Carriero, Massimo ^a  

^a JOINT RESEARCH CENTRE   (Italy)

Author keywords

In service conformity; Moving average window; PEMS; PM

Indexed keywords

AIR POLLUTION CONTROL EQUIPMENT; DIESEL ENGINES; DYNAMOMETERS; PARTICULATE EMISSIONS; PROMETHIUM;

ACCURATE QUANTIFICATIONS; AFTER-TREATMENT TECHNOLOGY; EMISSION MEASUREMENT SYSTEMS; ENGINE DYNAMOMETER TESTING; HEAVY-DUTY DIESEL ENGINE; MOVING AVERAGES; PEMS; REFERENCE MEASUREMENT SYSTEM;

REAL TIME SYSTEMS;

AEROSOL; ASSESSMENT METHOD; DIESEL ENGINE; EXHAUST EMISSION; GRAVIMETRY; REAL TIME; VOLATILE ORGANIC COMPOUND;

ACCURACY; ANALYTICAL EQUIPMENT; ARTICLE; CARBON FOOTPRINT; CONTROLLED STUDY; DIESEL ENGINE; DYNAMOMETER; GRAVIMETRY; INSTRUMENTATION; LABORATORY TEST; MEASUREMENT; PARTICULATE MATTER; PORTABLE EMISSION MEASUREMENT SYSTEM; PRIORITY JOURNAL; SENSOR; TECHNOLOGY;

EID: 84871525497     PISSN: 00218502     EISSN: 18791964     Source Type: Journal    
DOI: 10.1016/j.jaerosci.2012.10.004     Document Type: Article

References (59)

1. Andersson, J., Mamakos, A., Giechaskiel, B., Carriero, M. & Martini, G. (2010) Particle measurement programme (PMP) heavy-duty inter-laboratory correlation exercise (ILCE_HD). Final Report. JRC Scientific and Technical Report EUR 24561 EN.
2. Arndt, M., Schindler, W. & Silvis, W. (2011). Gas adsorption effects in particulate filters. In: 15th ETH Conference on Combustion Generated Particles, Zurich, June 26th-29th, 2011.
3. Bachman, L.J., Erb, A. & Bynum, C.L. (2005). Effect of single wide tires and trailer aerodynamics on fuel economy and NOx emissions of Class 8 line-haul tractor-trailers. SAE Technical Paper 2005-01-3551.
4. 3 vapors. Journal of Geophysical Research 1999, 104:23709-23718.
5. Bell G.A. On the production and reproduction of sound by light: the photophone. American Journal of Science 1880, 20:305-324.
6. Bergmann M., Kirchner U., Vogt R., Benter T. On-road and laboratory investigation of low-level PM emissions of a modern diesel particulate filter equipped diesel passenger car. Atmospheric Environment 2009, 43:1908-1916.
7. Bonnel, P., Carriero, M., Forni, F., Alessandrini, S., Montigny, F., Demircioglu, H., & Giechaskiel, B. (2010). EU-PEMS PM evaluation program - first report. JRC Scientific and Technical Reports. EUR 24543 EN.
8. Bonnel, P., Kubelt, J., & Provenza, A. (2011). Heavy-Duty engines conformity testing based on pems - lessons learned from the European pilot program. JRC Scientific and Technical Report EUR 24921 EN.
9. Booker, D.R., Giannelli, R.A., & Hu, J. (2007). Road test of an on-board particulate matter mass measurement system. SAE Technical Paper 2007-01-1116.
10. Boucher T.L., Khalek I.A., Laroo C.A., Bishnu D.K. Determination of the PEMS measurement allowance for PM emissions regulated under the heavy-duty diesel engine in-use testing program. SAE International Journal of Engines 2012, 5:1371-1386.
11. Campbell, B., Peckham, M., Symonds, J., Parkinson, J., & Finch, A. (2006). Transient gaseous and particulate emissions measurements on a diesel passenger car including a dpf regeneration event. SAE Technical Paper 2006-01-1079.
12. Chase R.,.E., Duszkiewicz, G.,.J., Richert, J.,.F., Lewis, D., Maricq, M.,.M. & Xu, N. (2004). PM measurement artefact: organic vapour deposition on different filter media. SAE Technical Papers 2004-01-0967.
13. Dilara, P., Franco, V., Kousoulidou, M., Ntziachristos, L., Geivanidis, S. & Samaras, Z. (2010). Validation of the COPERT road emission inventory model with real-use data. In: 19th International Emission Inventory Conference. Emission Inventories - Informing Emerging Issues. San Antonio, TX. September 27-30 2010.
14. Directive 2004/26/EC. (2004). Directive 2004/26/EC of the European Parliament and of them Council of 21 April 2004 Amending Directive 97/68/EC on the Approximation of the Laws of the Member States Relating to Measures Against the Emission of Gaseous and Particulate Pollutants from Internal Combustion Engines to be Installed in Non-Road Mobile Machinery. Available for download at: http://ec.europa.eu/enterprise/sectors/mechanical/documents/legislation/emissions-non-road/index_en.htm.
15. Durán A., de Lucas A., Carmona M., Ramos M.J., Armas O. Accuracy of the European standard method to measure the amount of dpm emitted to the atmosphere. Fuel 2002, 81:2053-2060.
16. Durbin T.D., Johnson K., Cocker D.R., Miller J.W., Maldonado H., Shah A., Ensfield C., Weaver C., Akard M., Harvey N., Symon J., Lanni T., Bachalo W.D., Payne G., Smallwood G., Linke M. Evaluation and comparison of portable emissions measurement systems and federal reference methods for emissions from a back-up generator and a diesel truck operated on a Chassis dynamometer. Environmental Science and Technology 2007, 41:6199-6204.
17. Durbin, T.D., Jung, H., Johnson, K., & Cocker, D.R. (2009). PM PEM's pre-measurement allowance - on-road evaluation and investigation. Final Report presented for the Measurement Allowance steering Committee, January 2009.
18. EC (2007). Regulation (EC) No 715/2007 of the European Parliament and of the Council of 20 June 2007 on Type Approval of Motor Vehicles with Respect to Emissions from Light Passenger and Commercial Vehicles (Euro 5 and Euro 6) and on Access to Vehicle Repair and Maintenance Information. Available at: http://ec.europa.eu/enterprise/sectors/automotive/documents/directives/motor-vehicles/index_en.htm.
19. EC (2008). Commission Regulation (EC) No 692/2008 of 18 July 2008 Implementing and Amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on Type-Approval of Motor Vehicles with Respect to Emissions from Light Passenger and Commercial Vehicles (Euro 5 and Euro 6) and on Access to Vehicle Repair and Maintenance Information. Available at: http://ec.europa.eu/enterprise/sectors/automotive/documents/directives/motor-vehicles/index_en.htm.
20. EC (2009). Regulation (EC) No 595/2009 of the European Parliament and of the Council of 18 June 2009 on Type-Approval of Motor Vehicles and Engines with Respect to Emissions from Heavy Duty Vehicles (Euro VI) and on Access to Vehicle Repair and Maintenance Information and Amending Regulation (EC) No 715/2007 and Directive 2007/46/EC and Repealing Directives 80/1269/EEC, 2005/55/EC and 2005/78/EC. Available at: http://ec.europa.eu/enterprise/sectors/automotive/documents/directives/motor-vehicles/index_en.htm.
21. EEA (2010). European Union emission inventory report 1990-2008 under the UNECE convention on long-range transboundary air pollution (LRTAP). Environmental Protection Agency Technical report No 7/2010. Copenhagen, Denmark. Available for download at: http://www.eea.europa.eu/publications/european-union-emission-inventory-report.
22. Federal Register. (2003). Proposed settlement agreement. Federal Register 68:113, June 12, 2013, pp 35211-35212.
23. Federal Register (2005). Control of emissions of air pollution from new motor vehicles: in-use testing for heavy-duty diesel engines and vehicles. Federal Register, June 14, 2005, vol. 70, No. 113.
24. Gautam, M., Stedman, D., Carder, D., Shade, B., Clark, N., Thompson, G., Wayne, S., Bishop, G., Schuchmann, B., Pope, D., Vescio, N., Full, G., McClintock, P., & Rau, D. (2010). Correlation of the real-time particulate matter emissions measurements of a ESP remote sensing device (RSD) and a Dekati Electronic Tailpipe Sensor (ETaPS) with gravimetrically measured pm from a total exhaust dilution tunnel system. ICAT Grant No. 06-02: Final Report. Available for download at: http://www.arb.ca.gov/research/apr/past/icat06-02.pdf.
25. Giechaskiel, B., Carriero, M., Bonnel, P., Schindler, W., Scheder, D., Bassoli, C., & Niemela, V. (2011). Feasibility of particulate mass and number measurement with portable emission measurement systems (PEMS) for in-use testing. SAE Technical Paper 2011-24-0199.
26. Giechaskiel, B., Carriero, M., Martini, G., Krasenbrink, A., & Scheder, D. (2009). Calibration and validation of various commerical particle number measurement systems. SAE Technical Paper 2009-01-1115.
27. Giechaskiel, B., Ntziachristos, L., Samaras, Z., Casati, R., Scheer, V., & Vogt, R. (2007). Effect of speed and speed-transition on the formation of nucleation mode particles from a light duty diesel vehicle. SAE Technical Paper 2007-01-1110.
28. ISO 16183 (2002). Heavy duty engines - measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions. ISO/TC 22/SC 5/WG 2 N 195E, 2002-02-07.
29. Jetter, J., Maeshiro, S., Hatcho, S., & Klebba, R. (2000). Development of an on-board analyzer for use on advanced low emission vehicles. SAE Technical Paper 2000-01-1140.
30. Jung H., Kittelson D.,.B. Characterization of aerosol surface instruments in transition regime. Aerosol Science and Technology 2005, 39:902-911.
31. Kaufman, S.L., Medved, A., Pöcher, A., Hill, N., Caldow, R., & Quant, F.R. (2002). An electrical aerosol detector based on the corona-jet charger. In: 21st AAAR Conference, October 7-11, 2002, Paper No. P12-07, Charlotte, NC.
32. Khalek, I.,.A. (2007). 2007 Diesel particulate measurement research. Final Report of Project E-66-Phase 2. March 2006. Available at download at: http://www.crcao.org/reports/recentstudies2006/E-66-Phase%202-Final%20Report-IAK-R5.pdf.
33. Khalek, I.A., Ulman, T.L., Shimpi, S.A., Jackson, C.C., Dharmawardhana, B., Silvis, W.M. Kreft, N., Harvey, R.N. Munday, D., Yamagishi, Y., Graze, R., Smitherman, J., & Adkins, J.. (2002). Performance of partial flow sampling systems relative to full flow CVS for determination of particulate emissions under steady-state and transient diesel engine operation. SAE Technical Paper 2002-01-1718.
34. Khan M.,.Y., Johnson K.,.C., Durbin T.,.D., Jung H., Cocker D.,.R., Bishnu D., Giannelli R. Characterization of PEMS-PM for in-use measurements conducted during validation testing for the PM-PEMS measurement allowance programme. Atmospheric Environment 2012, 55:311-318.
35. Kirchner, U., Vogt, R., & Maricq, M. (2010). Investigation of Euro-5/6 level particle number emissions of european diesel light duty vehicles. SAE Technical Paper 2010-01-0789.
36. Kittelson D.B. Engines and nanoparticles: a review. Journal of Aerosol Science 1998, 29:575-588.
37. MacDonald, J.S., Plee, S.L., D'Arcy, J.B., & Schreck, R.M. (1980). Experimental measurements of the independent effects of dilution ratio and filter temperature on diesel exhaust particulate samples. SAE Technical Paper 800185.
38. Mader B.T., Pankow J.F. Gas/solid partitioning of semivolatile organic compounds (SOCs) to air filters. 3. An analysis of gas adsorption artefacts in measurements of atmospheric SOCs and organic carbon (OC) when using teflon membrane filters and quartz fiber filters. Environmental Science and Technology 2001, 35:3422-3432.
39. Mamakos, A., Carriero, M., Bonnel, P., Demircioglu, H., Douglas, K., Alessandrini, S., Forni., F., Montigny, F., & Lesueur, D. (2011a). EU-PEMS PM evaluation program - second report - study on post DPF PM/PN emissions. JRC Scientific and Technical Report EUR 24793 EN.
40. Mamakos, A., Carriero, M., Bonnel, P., Demircioglu, H., Douglas, K., Alessandrini, S., Forni., F., Montigny, F., & Lesueur, D. (2011b). EU-PEMS PM evaluation program - third report - further study on post DPF PM/PN emissions. JRC Scientific and Technical Report EUR 24883 EN.
41. McNaught A.D., Wilkinson A. Compendium of Chemical Terminology 1997, Blackwell Science Inc. 2nd edition.
42. Ntziachristos, L., Giechaskiel, B., Pistikopoulos, P., Samaras, Z., Mathis, U., Mohr, M., Ristimäki, J., Keskinen, J., Mikkanen, P., Casati, R., Scheer, V., & Vogt, R. (2004a). Performance evaluation of a novel sampling and measurement system for exhaust particle characterization. SAE Technical Paper 2004-01-1439.
43. Ntziachristos L., Giechaskiel B., Ristimäki J., Keskinen J. Use of a corona charger for the characterisation of automotive exhaust aerosol. Journal of Aerosol Science 2004, 35:943-963.
44. Ntziachristos, L., & Tikkanen, J. (2009). Pegasor particle sensor (PPS) potential solution for on-board diagnosis of particle filter operation - first results and development potential. In: American Filtration & Separations Society 2009 Topical Conference, Emission Solutions in Transportation; October 5-8, 2009, Ann Arbor, MI.
45. Olfert J.,.S., Symonds J.,.P.,.R., Collings N. The effective density and fractal dimension of particles emitted from a light-duty diesel vehicle with a diesel oxidation catalyst. Journal of Aerosol Science 2007, 2007:69-82.
46. Reichel, S., Pischinger, F.,.F., & Lepperhoff, G. (1983). Influence of particles in diluted diesel engine exhaust gas. SAE Technical Paper 831333.
47. Rubino, L., Bonnel, P., Hummel, R., Krasenbrink, A., & De Santi, G. (2007). PEMS light duty vehicles application: experience in downtown Milan. SAE Technical Paper 2007-24-0113.
48. Schindler, W., Haisch, C., Beck, H.A., Niessner, R., Jacob, E., & Rothe, D. (2004). A photoacoustic sensor system for time resolved quantification of diesel soot emissions. SAE Technical Paper 2004, 2004-01-0968.
49. Seinfeld J., Pandis S. Atmospheric Chemistry and Physics: From Air Pollution to Climate Change 2006, Willey-Interscience, New York, 579. 2nd edition.
50. Silvis, W.M., Marek, G., Kreft, N., & Schindler, W. (2002). Diesel particulate measurement with partial flow sampling systems: a new probe and tunnel design that correlates with full flow tunnels. SAE Technical Paper 2002-01-0054.
51. Swanson J., Kittelson D., Watts W., Gladis D., Twigg M. Influence of storage and release on particle emissions from new and used CRTs. Atmospheric Environment 2009, 43:3998-4004.
52. UNECE (2010). Regulation 83: agreement concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions. Available at: http://www.unece.org/trans/main/wp29/wp29regs81-100.html.
53. UNECE (2011). Regulation 49: agreement concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions. Addendum 48: Regulation No. 49, Revision 5. Available at 9. http://www.unece.org/trans/main/wp29/wp29regs41-60.html.
54. USEPA (2000). National air pollutant emission trends, 1900-1998. United States Environmental Protection Agency report EPA 454/R-00-002. Available for download at http://www.epa.gov/ttn/chief/trends/trends98/index.html.
55. USEPA (2008). Determination of PEMS measurement allowances for gaseous emissions regulated under the heavy-duty diesel engine in-use testing programme. Revised Final Report. February 2008. Available at: http://www.epa.gov/otaq/regs/hd-hwy/inuse/420r08005.pdf.
56. Vojtisek Lom, M. & Allsop, J.E. (2001). Development of heavy-duty diesel portable on-board mass exhaust emissions monitoring system with NOx, CO2, and qualitative PM capabilities. SAE Technical Paper 2001-01-3641.
57. Vouitsis E., Ntziachristos L., Samaras Z. Particulate matter mass measurements for low emitting diesel powered vehicles what's next?. Progress in Energy and Combustion Science 2003, 29:635-636.
58. Wei, Q., Akard, M., Porter, S., & Nakamura, H. (2009). The effect of drive cycles on pm emission characteristics from a gasoline vehicle. SAE Technical Paper 2009-01-1119.
59. Weiss M., Bonnel P., Hummel R., Provenza A., Manfredi U. On-road emissions of light-duty vehicles in Europe. Environmental Science and Technology 2011, 41:8575-8581.