Structural identification of constructed systems: Approaches, methods, and technologies for effective practice of St-Id

Structural Identification of Constructed Systems: Approaches, Methods, and Technologies for Effective Practice of St-Id

Volumn , Issue , 2013, Pages 1-234

  Çatbaş, F Necati ^a   Kijewski Correa, Tracy ^b   Aktan, A Emin ^c  

^a UNIVERSITY OF CENTRAL FLORIDA   (United States)

^b UNIVERSITY OF NOTRE DAME   (United States)

^c DREXEL UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DATA HANDLING; DECISION SUPPORT SYSTEMS; FEATURE EXTRACTION; RISK ANALYSIS; RISK ASSESSMENT; RISK PERCEPTION; STRUCTURAL ANALYSIS;

EFFECTIVE PRACTICES; PERFORMANCE EVALUATIONS; REAL STRUCTURAL SYSTEMS; STRUCTURAL ENGINEER; STRUCTURAL ENGINEERING INSTITUTES; STRUCTURAL IDENTIFICATION; STRUCTURAL MODELING; TECHNICAL ACTIVITIES;

STRUCTURAL HEALTH MONITORING;

EID: 84978680955     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1061/9780784411971     Document Type: Book

References (556)

1. Agbabian, M. S., Masri, S. F., Miller, R. K., and Caugher, T. K. (1990). “System identification approach to detection of structural changes." ASCE Journal of Engineering Mechanics, 117, 370-390.
2. Aktan, A. E., and et al. (2007). “Long-term vision for the ASCE technical committee: Structural identification of constructed systems." SHMII-3: 3rd International Conference on Structural Health Monitoring and Intelligent Infrastructure, Vancouver, BC.
3. Aktan, A. E., Farhey, D. N., Helmicki, A. J., Brown, D. L., Hunt, V. J., Lee, K. L., and Levi, A. (1997). “Structural identification for condition assessment: Experimental arts." Journal of Structural Engineering, 123(12), 1674-1684.
4. Aktan, A. E., Helmicki, A. J., and Hunt, V. J. (1998). “Issues in health-monitoring for intelligent infrastructure." Smart Materials and Structures, 7(5), 674-692.
5. Aktan, A. E., and Moon, F. L. (2005). ASCE-SEI performance of structures track technical committee: Structural identification of constructed systems (2005), Drexel University, Philadelphia, PA.
6. Al-Khalidy, A., Noori, M., Hou, Z., Yamamoto, S., Masuda, A., and Sone, A. (1997). “Health monitoring systems of linear structures using wavelet analysis." International Workshop on Structural Health Monitoring, Stanford University, Palo Alto, CA.
7. Andersen, P., and Kirkegaard, P. H. (1998). “Statistical damage detection of civil engineering structures using ARMAV models." 16th International Modal Analysis Conference, Society of Experimental Mechanics, Santa Barbara, CA.
8. Beck, J. L. (1990). “Statistical system identification of structures." Structural safety and reliability, ASCE, New York, 1395-1402.
9. Beck, J. L., and Katafygiotis, L. S. (1998). “Updating models and their uncertainties: Bayesian statistical framework." Journal of Engineering Mechanics, 124(4), 455-461.
10. Billington, D. P. (1979). Robert Maillart’s bridges: The art of engineering, Princeton University Press, Princeton, NJ.
11. Biswas, M., Pandey, A. K., and Samman, M. M. (1989). “Diagnostic experimental spectral/Modal analysis of a highway bridge." International Journal of Analytical and Experimental Modal Analysis, 5(1), 33-42.
12. Bodeux, J. B., and Golinval, J. C. (2001). “Application of ARMAV models to identification and damage detection of mechanical and civil engineering structures." Smart Materials and Structures, 10, 479-489.
13. Brownjohn, J. M. W. (2003). “Ambient vibration studies for system identification of tall buildings." Earthquake Engineering and Structural Dynamics, 32(1), 71-95.
14. Brownjohn, J. M. W., Dumanoglu, A. A., Sevem, R. T., and Taylor, C. (1987). “Ambient vibration measurements of the Humber suspension bridge and comparison with calculated characteristics." Institution of Civil Engineers, Part 2, 83, 561-600.
15. Brownjohn, J. M. W., Dumanoglu, A. A., and Severn, R. T. (1992). “Ambient vibration survey of the Fatih Sultan Mehmet (second bosporus) suspension bridge." Earthquake Engineering and Structural Dynamics, 21, 907-924.
16. Brownjohn, J. M. W., Moyo, P., Omenzetter, P., and Lu, Y. (2003). “Assessment of highway bridge upgrading by dynamic testing and finite element model updating." ASCE Journal of Bridge Engineering, 8(3), 162-172.
17. Bucher, C., Huth, O., and Macke, M. (2003). “Accuracy of system identification in the presence of random fields." ICASP 9, San Francisco, CA.
18. Chang, C. C., Chang, T. Y. P., and Zhang, Q. W. (2001). “Ambient vibration of longspan cable-stayed bridge." ASCE Journal of Bridge Engineering, 6(1), 46-53.
19. Chassiakos, A. G., Masri, S. F., Smyth, A. W., and Anderson, J. C. (1995). “Adaptive methods for identification of hysteretic structures." American Control Conference, Seattle, WA.
20. Doebling, S. W., Farrar, C. R., and Prime, M. B. (1998). “A summary review of vibration-based damage identification methods." Shock and Vibration Digest, 30(2), 91-105.
21. Douglas, B. M., and Reid, W. H. (1982). “Dynamic tests and system identification of bridges." ASCE Journal of Structural Engineering, 108(10), 2295-2312.
22. Eves, H. (1990). An introduction to the history of mathematics with cultural connections, Saunders College Publishing, Fort Worth, TX.
23. Farrar, C. R., and Doebling, S. W. (1998). “Damage detection II: Field applications to large structures." Proceedings of NATO Advanced Study Institute on Modal Analysis and Testing, Sesimbra, Portugal.
24. Fujino, Y., and Abe, M. (2002). “Vibration-based structural health monitoring of civil infrastructures." First International Workshop on Structural Health Monitoring, ISIS, Winnipeg, Canada.
25. Fujino, Y., Nakamura, S., Shibuya, H., Sato, M., Yanagihara, M., and Sakamoto, Y. (1999). “Forced and ambient vibration tests of Hakucho suspension bridge." Structures Congress, ASCE, New Orleans, LA.
26. Gurley, K., and Kareem, A. (1999). “Applications of wavelet transform in earthquake, wind and ocean engineering." Engineering Structures, 21(2), 149-167.
27. Hart, G. C., and Yao, J. T. P. (1977). “System identification in structural dynamics." ASCE Journal of Engineering Mechanics, 103(6), 1089-1104.
28. Hornbuckle, J., Mercurio, T., Howard, G., Ibanez, P., Smith, C. B., and Vasudevan, R. (1973). “Forced vibration tests and analyses of nuclear power plants." Nuclear Engineering and Design, 25(1), 51-93.
29. Hou, Z. K., Noori, M., and Amand, R. S. (2000). “Wavelet-based approach for structural damage detection." ASCE Journal of Engineering Mechanics, 126(7), 677-683.
30. Huang, N. E., and et al. (1998). “The empirical mode decomposition and the Hilbert spectrum for non-linear and non-stationary time series analysis." Philosophical Transactions of the Royal Society of London, Series A, Mathematical and Physical Sciences, 454, 903-995.
31. Hudson, D. E. (1970). “Dynamic tests of full-scale structures." Earthquake engineering, Prentice-Hall, Inc., Englewood Cliffs, NJ, 127-149.
32. Hudson, D. E. (1976). “Dynamic tests of full-scale structures." Dynamic Response of Structures: Testing Methods and System Identification, University of California, Los Angeles, Los Angeles, CA.
33. Ibanez, P. (1979). Review of analytical and experimental techniques for improving structural dynamic problems, 249, Welding Research Council, Shaker Heights, OH.
34. Jayakumar, P., and Beck, J. L. (1988). “System identification using nonlinear structural models." Structural safety evaluation based on system identification approaches, H. G. Natke and J. T. P. Yao, eds., Vieweg-Verlag, Wiesbaden, Germany, 1.
35. Kapania, R. K., and Park, S. (1997). “Parametric identification of nonlinear structural dynamic systems using time finite element method." American Institute of Aeronautics and Astronautics, 35(4)
36. Kijewski, T., and Kareem, A. (2003). “Wavelet transforms for system identification in civil engineering." Computer-Aided Civil and Infrastructure Engineering, 18, 339-355.
37. Kossiakoff, A., and Sweet, W. N. (2002). Systems engineering principles and practice, John Wiley and Sons, New York, NY.
38. Kou, J. W., and DeWolf, J. T. (1997). “Vibrational behavior of continuous span highway bridge - influencing variables." ASCE Journal of Structural Engineering, 123(3), 333-344.
39. Liu, S. C., and Yao, J. T. P. (1978). “Structural identification concept." ASCE Journal of the Structural Division, 104(ST12), 1845-1858.
40. Maeck, J., and De Roeck, G. (2003). “Damage assessment using vibration analysis on the Z24-bridge." Mechanical Systems and Signal Processing, 17(1), 133-142.
41. Masri, S. F., Nakamura, M., Chassiakos, A. G., and Caughey, T. K. (1996). “Neural network approach to detection of changes in structural parameters." Journal of Engineering Mechanics, 122(4), 350-360.
42. Moon, F., and Aktan, A. E. (2006). “Impacts of epistemic (bias) uncertainty on structural identification of constructed (civil) systems." Shock and Vibration Digest, 38(5), 399-420.
43. Mottershead, J. E., and Friswell, M. I. (1993). “Model updating in structural dynamics: A survey." Journal of Sound and Vibration, 167(2), 347-375.
44. Naghavi, R., and Aktan, A. E. (2003). “Nonlinear behavior of existing heavy-class steel truss bridges." ASCE Journal of Structural Engineering, 129(8), 1113-1121.
45. Nakamura, M., Masri, S. F., Chassiakos, A. G., and Caughey, T. K. (1998). “Method for nonparametric damage detection through the use of neural networks." Earthquake Engineering and Structural Dynamics, 27, 997-1010.
46. Natke, H. G., and Yao, J. T. P. (1986). “Research topics in structural identification." 3rd Conference on Dynamic Response of Structures, Los Angeles, CA.
47. Natke, H. G., and Yao, J. T. P. (1989). “System identification methods for fault detection and diagnosis." Fifth International Conference on Structural Safety and Reliability, San Francisco, CA.
48. Shinozuka, M., and Ghanem, R. (1995). “Structural system identification II: Experimental validation." ASCE Journal of Engineering Mechanics, 121(2), 265-273.
49. Smyth, A. W., Masri, S. F., Chassiakos, A. G., and Caughey, T. K. (1999). “Online parametric identification of MDOF nonlinear hysteretic systems." ASCE Journal of Engineering Mechanics, 125(2), 133-142.
50. Sohn, H., Farrar, C. R., Hemez, F. M., Czarnecki, J. J., Shunk, D. D., Stinemates, D. W., and Nadler, B. R. (2004). A review of structural health monitoring literature: 1996-2001, LA-13976-MS, Los Alamos National Laboratory, Los Alamos, NM.
51. Stubbs, N., Kim, J. T., and Topole, K. (1992). “An efficient and robust algorithm for damage localization in offshore platforms." 10th ASCE Structures Congress, San Antonio, TX.
52. Teughels, A., and De Roeck, G. (2004). “Structural damage identification of the highway bridge Z24 by FE model updating." Journal of Sound and Vibration, 278(3), 589-610.
53. Vincent, H. T., Hu, S. J., and Hou, Z. (1999). “Damage detection using empirical mode decomposition method and a comparison with wavelet analysis." 2nd International Workshop on Structural Health Monitoring, Stanford University, Palo Alto, CA.
54. Wenzel, H., and Pichler, D. (2005). Ambient vibration monitoring, John Wiley and Sons, New York, NY.
55. Yang, J. N., Lei, Y., and Huang, N. E. (2001). “Damage identification of civil engineering structures using Hilbert-Huang transform." 3rd International Workshop on Structural Health Monitoring, Stanford University, Palo Alto, CA.
56. Yuen, K. V., and Katafygiotis, L. S. (2002). “Bayesian modal updating using complete input and incomplete response noisy measurements." Journal of Engineering Mechanics, 128(3), 340-350.
57. Zapico, J. L., Gonzalez, M. P., and Worden, K. (2003). “Damage assessment using neural networks." Mechanical Systems and Signal Processing, 17(1), 119-125.
58. Brownjohn, J. M. W., Pan, T. C., and Deng, X. Y. (2009). “Macro-updating of finite element modeling for core systems of tall buildings." Proceedings of the 14th Engineering Mechanics Conference, ASCE, Austin, TX.
59. Catbas, F. N., Ciloglu, S. K., Hasancebi, O., Grimmelsman, K. A., and Aktan, A. E. (2007). “Limitations in structural identification of large constructed structures." Journal of Structural Engineering, 133(8), 1051-1066.
60. Ahola, R., and Tervaskanto, M. (1991). “A position-sensing laser system for analyzing dynamic deflection in large constructions." Field Measurements in Geotechnics, Oslo, Norway.
61. Anderson, D., and Mills, B. (1971). “Multi-point excitation techniques." Environmental Engineering, 51, 12-16.
62. Avitabile, P. (1998). “Modal space - back to basics: Is there any difference between a roving hammer and roving accelerometer test?" Experimental Techniques, 22(5), 9-10.
63. Bakht, B., and Jaeger, J. G. (1990). “Bridge testing: A surprise every time." ASCE Journal of Structural Engineering, 116(5), 1370.
64. Beckwith, T. G., Marangoni, R. D., and Lienhard, J. H. (1995). Mechanical measurements, Addison-Wesley Publishing, Reading, MA.
65. Bell, E. S., Sipple, J., and Yost, J. (2008). “Long-term thermal performance of a CFRP-reinforced bridge deck." Structures Congress, ASCE, Vancouver, Canada.
66. Bernardini, G., De Pasquale, G., Bicci, A., Marra, M., Coppi, F., and Ricci, P. (2007). “Microwave interferometer for ambient vibration measurement: I. principles of the radar technique and laboratory tests." EVACES '07: International Conference on Experimental Vibration Analysis, Porto, Portugal.
67. Bougard, A. J., and Ellis, B. R. (2000). “Laser measurement of building vibration and displacement." Shock and Vibration, 7, 287-298.
68. Brook, R. R. (1977). Boundary-Layer Meteorology, 11(1), 33-37.
69. Broomfield, J. P., Davies, K., and Hladky, K. (2002). “The use of corrosion monitoring in new and existing reinforced concrete structures." Cement and Concrete Composite, 24, 27-34.
70. Brownjohn, J. M. W. (2007a). “Noise characteristics of sensors for extreme low level vibration measurements." 25th International Modal Analysis Conference, Society of Experimental mechanics, Orlando, FL.
71. Brownjohn, J. M. W. (2007b). “Structural health monitoring of civil infrastructure." Philosophical Transactions of the Royal Society of London, Series A, Mathematical and Physical Sciences, 365, 589-622.
72. Brownjohn, J. M. W., Carden, E. P., Goddard, C. R., Oudin, G., and Koo, K. (2009). “Real-time performance tracking on a 183m concrete chimney and tuned mass damper system." IOMAC 2009, Porto Novo, Italy.
73. Brownjohn, J. M. W., Dumanoglu, A. A., and Severn, R. T. (1992). “Ambient vibration survey of the Fatih Sultan Mehmet (second bosporus) suspension bridge." Earthquake Engineering and Structural Dynamics, 21, 907-924.
74. Brownjohn, J. M. W., Fok, P., Roche, M., and Moyo, P. (2004). “Long span steel pedestrian bridge at Singapore Changi airport - part 1: Prediction of vibration serviceability." Structural Engineer, 82(16), 21-27.
75. Brownjohn, J. M. W., Fok, P., Roche, M., and Omenzetter, P. (2004). “Long span steel pedestrian bridge at Singapore Changi airport - part 2: Crowd loading tests and vibration mitigation measures." Structural Engineer, 82(16), 28-34.
76. Brownjohn, J. M. W., and Moyo, P. (2001). “Monitoring of Malaysia-Singapore second link during construction." 2nd International Conference on Experimental Mechanics, Singapore.
77. Brownjohn, J. M. W., Moyo, P., Omenzetter, P., and Lu, Y. (2003). “Assessment of highway bridge upgrading by dynamic testing and finite element model updating." ASCE Journal of Bridge Engineering, 8(3), 162-172.
78. Brownjohn, J. M. W., and Pan, T. C. (2008). “Identifying loading and response mechanisms from ten years of performance monitoring of a tall building." ASCE Journal of Performance of Construction Facilities, 22(1), 25-34.
79. Brownjohn, J. M. W., Pavic, A., and Omenzetter, P. (2004). “A spectral density approach for modeling continuous vertical forces on pedestrian structures due to walking." Canadian Journal of Civil Engineering, 31(1), 65-77.
80. Brownjohn, J. M. W., Stringer, M., Tan, G. H., Poh, Y. K., Ge, L., and Pan, T. C. (2005). “Experience with RTK-GPS system for monitoring wind and seismic effects on a tall building." SHMII-2: Structural Health Monitoring and Intelligent Infrastructures, Shenzen, China.
81. Brownjohn, J. M. W., and Tao, N. F. (2005). “Vibration excitation and control of a pedestrian walkway by individuals and crowds." Journal of Shock and Vibration, 12(5), 333-347.
82. Buckland, P. G., Hooley, R., Morgenstem, B. P., Rainer, J. H., and Van, S. (1979). “Suspension bridge vibrations: Computed and measured." ASCE Journal of Structural Engineering, 105(5), 859-874.
83. Caetano, E., Cunha, A., and Moutinho, C. (2007). “Implementation of passive devices for vibration control at Coimbra footbridge." Experimental Vibration Analysis of Civil Engineering Structures, FEUP
84. Caetano, E., Silva, S., and Bateira, J. (2007). “Application of a vision system to the monitoring of cable structures." 7th International Symposium on Cable Dynamics, Vienna, Austria.
85. Calcada, A., Cunha, A., and Delgado, R. (2005). “Analysis of traffic-induced vibrations in a cable-stayed bridge. part 1: Experimental assessment." ASCE Journal of Bridge Engineering, 10(4), 370-385.
86. Carne, T. G., and Stasiunas, E. C. (2006). “Lessons learned in modal testing - part 3: Transient excitation for modal testing, more than just hammer impacts." Experimental Techniques, 30(3), 69-79.
87. Catbas, F. N., Ciloglu, S. K., Hasancebi, O., Grimmelsman, K. A., and Aktan, A. E. (2007). “Limitations in structural identification of large constructed structures." Journal of Structural Engineering, 133(8), 1051-1066.
88. Cebon, D. (1993). Interaction between heavy vehicles and roads, SP-0951, SAE International, Warrendale, PA.
89. Celebi, M. (2000). “GPS in dynamic monitoring of long-period structures." Soil Dynamics and Earthquake Engineering, 20, 477-483.
90. Celebi, M., and Sanli, A. (2002). “GPS in pioneering dynamic monitoring of longperiod structures." Earthquake Spectra, 18(1), 47-61.
91. Cheung, M. S., Tadros, G. S., Brown, J., Dilger, W. H., Ghali, A., and Lau, D. T. (1997). “Field monitoring and research on performance of the confederation bridge." Canadian Journal of Civil Engineering, 25(951), 962.
92. Cunha, A., Caetano, E., and Magalhaes, F. (2006). From input-output to output-only modal identification of civil engineering structures, SAMCO Association, Europe.
93. Cunha, A., Caetano, E., and Magalhaes, F. (2007). “Output-only dynamic testing of bridges and special structures." Structural Concrete, 8(2), 67-85.
94. Dalgliesh, W. A., and Rainer, J. H. (1978). “Measurements of wind induced displacements and acceleration of a 57-storey building in Toronto, Canada." 3rd Colloquium on Industrial Aerodynamics, Aachen, Germany.
95. Daniell, W. E. (1994). “Full-scale dynamic testing and analysis of a reservoir intake tower." Earthquake Engineering and Structural Dynamics, 23(11), 1219-1237.
96. Doebelin, E. O. (1990). Measurement systems: Application and design, McGraw-Hill, New York, NY.
97. Dougill, J. W., Wright, J. R., Parkhouse, J. G., and Harrison, R. E. (2006). “Human structure interaction during rhythmic bobbing." The Structural Engineer, 84(22), 32-39.
98. Dunnicliff, J. (1994). Geotechnical instrumentation for monitoring field performance, John Wiley and Sons, Chichester, UK.
99. Dziuba, P., Grillaud, G., Flamand, O., Sanquier, S., and Tetard, Y. (2001). La Passerelle Solferino: Comportement dynamique (Solferino Bridge: Dynamic behaviour). Bulletin ouvrages metalliques, 1, 34-57. c
100. Esfandiari, A., Bakhtiari-Nejad, F. Rahai, A. and Sanayei, M., “Structural Model Updating Using Frequency Response Function and Quasi-Linear Sensitivity Equation," Journal of Sound and Vibration, doi: 10.1016/j.jsv.2009.07.001, 326, September 2009, pp. 557-573.
101. Esfandiari, A., Bakhtiari-Nejad, F., Sanayei, M., and Rahai, A., “Structural Finite Element Model Updating Using Transfer Function Data," Computers and Structures, doi: 10.1016/j.compstruc.2009.09.004, Vol. 88, Issues 1-2, January 2010, pp. 54-64.
102. Esfandiari, A., Sanayei, M., Bakhtiari-Nejad, F., and Rahai, R., “Finite Element Model Updating using Frequency Response Function of Incomplete Strain Data," AIAA Journal, doi: 10.2514/1.J050039, 2010. Vol. 48, No. 7, July 2010, pp. 1420-1433.
103. Ewins, D. J. (1999). “Virtual modal testing." Asia Pacific Vibration Conference, Singapore.
104. Eyre, R., and Tilly, G. P. (1977). “Damping measurements on steel and composite bridges." Symposium on Dynamic Behavior of Bridges, TRRL Supplementary Report 275, Transport and Road Research Laboratory, Crowthorne, UK.
105. Fitzpatrick, A., Dallard, P., le Bourva, S., Low, A., Ridsill Smith, R., and Wilford, M. (2001). Linking London: The millennium bridge, Royal Academy of Engineering, London, UK.
106. Frandsen, J. B. (2001). “Simultaneous pressure and accelerations measured full-scale on the great belt east suspension bridge." Journal of Wind Engineering and Industrial Aerodynamics, 89(1), 95-129.
107. Fricker, F., and Vogel, T. (2007). “Site installation of a continuous acoustic monitoring." Construction and Building Materials, 21, 501-510.
108. Gebremichael, Y. M., Li, W., Meggitt, B. T., Boyle, W. J. O., Grattan, K. T. V., McKinley, B., Boswell, L. F., Aarmes, K. A., Aasen, S. E., Tynes, B., Fonjallaz, Y., and Triantafillou, T. (2005). “A field deployable, multiplexed Bragg grating sensor system used in an extensive highway bridge monitoring evaluation test." IEEE Sensors Journal, 5(3), 510-519.
109. Gentile, C., and Bernardini, G. (2008). “Output-only modal identification of a reinforced concrete bridge from radar-based measurement." NDT & E International, 41(7), 544-553.
110. Gentile, C., and Cabrera, F. (1997). “Dynamic investigation of a repaired cablestayed bridge." Earthquake Engineering and Structural Dynamics, 26(1), 41-59.
111. Gili, J. A., Corominas, J., and Rius, J. (2007). “Using global positioning system techniques in landslide monitoring." Engineering Geology, 55(3), 167-192.
112. Glanville, M. J., Kwok, K. C. S., and Denoon, R. O. (1996). “Full-scale damping measurements of structures in Australia." Journal of Wind Engineering and Industrial Aerodynamics, 59, 349-364.
113. Glisic, B., and Inaudi, D. (2007). Fibre optic methods for structural health monitoring, John Wiley and Sons, New York, NY.
114. Green, M. F., and Cebon, D. (1994). “Dynamic response of highway bridges to heavy vehicle loads: Theory and experimental validation." Journal of Sound and Vibration, 170(1), 51-78.
115. Hammersley, G. P., and Dill, M. J. (1998). “The long-term monitoring of civil engineering and building structures - developments in techniques for monitoring corrosion in reinforced and post-tensioned concrete." I MECH E Part I Journal of Systems and Control Engineering, 212(3), 175-188.
116. Haritos, N., Hira, A., Mendis, P., Heywood, R., and Giufre, A. (2000). “Load testing to collapse limit state of Barr creek bridge." Transportation Research Record, 1696, 92-102.
117. Higashihara, H., Moriya, T., and Tajima, J. (1987). “Ambient vibration test of an anchorage of south Bisan-Seto suspension bridge." Earthquake Engineering and Structural Dynamics, 15, 679-695.
118. Hudson, D. E. (1964). “Response testing of full-scale structures." ASCE Journal of Engineering Mechanics, 90(3), 1-19.
119. Hudson, D. E. (1970). “Dynamic tests of full-scale structures." Earthquake engineering, Prentice-Hall, Inc., Englewood Cliffs, NJ, 127-149.
120. Hudson, D. E. (1976). “Dynamic tests of full-scale structures." Dynamic Response of Structures: Testing Methods and System Identification, University of California, Los Angeles, Los Angeles, CA.
121. Huston, D. (2011). Structural sensing, health monitoring and performance evaluation, Taylor and Francis Group, LLC, Boca Raton, FL.
122. Hutin, C. (2000). “Modal analysis using appropriate excitation techniques." Sound and Vibration, December, 1.
123. Ibanez, P. (1979). Review of analytical and experimental techniques for improving structural dynamic problems, 249, Welding Research Council, Shaker Heights, OH.
124. Jeary, A. P., and Ellis, B. R. (1981). “Vibration tests of structures at varied amplitudes." Dynamic response of structures: Experimentation observation prediction and control, G. Hart, ed., ASCE, New York, 281-294.
125. Karashima, T. (1990). “Distributed temperature sensing using simulated Brillouin scattering in optical silica fibers." Optics Letters, 15, 1038-1040.
126. Kijewski-Correa, T., Kareem, A., and Kochly, M. (2006). “Experimental verification and full-scale deployment of global positioning systems to monitor the dynamic response of tall buildings." Journal of Structural Engineering, 132(8), 1242-1253.
127. Kijewski-Correa, T., Kilpatrick, J., Kareem, A., Kwon, D. K., Bashor, B., Kochly, M., Young, B. S., Abdelrazaq, A., Galsworthy, J. K., Isyumov, N., Morrish, D., Sinn, R. C., and Baker, W. F. (2006). “Validating wind-induced response of tall buildings: Synopsis of the Chicago full-scale monitoring program." ASCE Journal of Structural Engineering, 132(10), 1509-1523.
128. Kijewski-Correa, T., and Kochly, M. (2007). “Monitoring the wind-induced response of tall buildings: GPS performance and the issue of multipath effects." Journal of Wind Engineering and Industrial Aerodynamics, 95(9-11), 1176-1198.
129. Kramer, C., and De Smet, C. A. M. (1999). “Comparison of ambient and forced vibration testing of civil engineering structures." 17th International Modal Analysis Conference (IMAC-XVII), Society of Experimental Mechanics, Kissimmee, FL.
130. Lee, P. K. K., Ho, D., and Chung, H. W. (1987). “Static and dynamic tests of concrete bridge." ASCE Journal of Structural Engineering, 113(1), 61-73.
131. Li, Q. S., and Wu, J. R. (2007). “Time-frequency analysis of typhoon effects on a 79 storey building." Journal of Wind Engineering and Industrial Aerodynamics, 95, 1648-1666.
132. Li, S., and Wu, Z. S. (2008). “Development of distributed long-gage fiber optic sensing system for structural health monitoring." Structural Health Monitoring, 6(2), 133-143.
133. List, D., Cole, R., Wood, T., and Brownjohn, J. M. W. (2006). “Monitoring performance of the Tamar suspension bridge." 3rd International Conference on Bridge Maintenance, Safety and Management, IABMS, Porto, Portugal.
134. Littler, J. D., and Ellis, B. R. (2007). “Interim findings from full-scale measurements at Hume point." Journal of Wind Engineering and Industrial Aerodynamics, 36, 1181-1190.
135. Luscher, D. J., Brownjohn, J. M. W., Sohn, H., and Farrar, C. (2001). “Modal parameter extraction of Z24 bridge data." 19th International Modal Analysis Conference, Society of Experimental Mechanics, Kissimmee, FL.
136. Lynch, J. P. (2002). Decentralization of wireless monitoring and control technologies for smart civil structures, 140, John A. Blume Engineering Center, Stanford, CA.
137. Lynch, J. P., and Loh, K. J. (2006). “A summary review of wireless sensors and sensor networks for structural health monitoring." Shock and Vibration Digest, 38(2), 91-128.
138. Macdonald, J. H. G., Dagless, E. L., Thomas, B. T., and Taylor, C. (1997). “Dynamic measurements of the Second Severn Crossing." Proceedings of Institution of Civil Engineers, Transport, 123(4), 241-248.
139. Marecos, J., Castanheta, M., and Trigo, J. T. (1969). “Field observations of Tagus River suspension bridge." ASCE Journal of the Structural Division, 95(ST4), 555-583.
140. Marighetti, J., Wittwer, A., De Bortoli, M., Natalini, B., Paluch, M., and Natalini, M. (2000). “Fluctuating and mean pressure measurements on a stadium covering in wind tunnel." Journal of Wind Engineering and Industrial Aerodynamics, 84(3), 321-328.
141. McConnell, K. G. (1995). Vibration testing theory and practice, John Wiley and Sons, Inc., New York, NY.
142. Meng, X., Roberts, G. W., Dodson, A. H., and Brown, C. J. (2006). “GNSS for bridge deformation: Limitations and solutions." 3rd International Conference on Bridge Maintenance, Safety and Management, International Association for Bridge Maintenance and Safety
143. Mickitopoulou, A., Protopsalti, K., and Stiros, S. (2006). “Monitoring dynamic and quasi-static deformations of large flexible engineering structures with GPS: Accuracy, limitations and promises." Engineering Structures, 28, 1471-1482.
144. Miller, R. A., Aktan, A. E., and Sharooz, B. M. (1992). “Nondestructive and destructive testing of a three span skewed R.C. slab bridge." Conference on Nondestructive Testing of Concrete Elements and Structures, American Society of Civil Engineers, San Antonio, TX.
145. Moore, J. F. A. (1973). “The photogrammetric measurement of constructional displacements of a rockfill dam." Photogrammetric Record, 7(42), 628-648.
146. Moyo, P., Brownjohn, J. M. W., and Omenzetter, P. (2004). “Highway bridge live loading assessment and load carrying capacity estimation using a health monitoring system." Structural Engineering and Mechanics, 18(5), 609-626.
147. Myrvoll, F., DiBiagio, E., and Hansvold, C. (1994). “Instrumentation for monitoring the Skarnsundet cable-stayed bridge." 3rd Symposium on Straits Crossings
148. OECD. (1998). Dynamic interaction between vehicles and infrastructure experiment, DSTI/DOT/RTR/IR6(981)I, Organization for Economic Cooperation and Development, Paris, France.
149. Park, G., and Inman, D. J. (2007). “Structural health monitoring using piezoelectric impedance measurements." Philosophical Transactions of the Royal Society of London, Series A, Mathematical and Physical Sciences, 365(1851), 373-392.
150. Partridge, A., and Kenny, T. (2000). “A high performance planar piezoresistive accelerometer." Journal of Microelectronical Systems, 9(1), 58-66.
151. Patron-Solares, A., Cremona, C., Bottineau, C., Leconte, R., and Goepfer, F. (2005). “Study of bell swinging induced vibrations of bell tower of Metz cathedral (France)." Experimental Vibration Analysis for Civil Engineering Structures, Bordeaux, France.
152. Peeters, B., Cornelis, B., Janssens, K., and van der Auweraer, H. (2007). “Removing disturbing harmonics in operational modal analysis." International Operational Modal Analysis Conference, Copenhagen, Denmark.
153. Peeters, B., and Ventura, C. E. (2003). “Comparative study of modal analysis techniques for bridge dynamic characteristics." Mechanical Systems and Signal Processing, 17(5), 965-988.
154. Pernica, G. (1983). “Dynamic live loads at a rock concert." Canadian Journal of Civil Engineering, 10(2), 185-191.
155. Psimoulis, P., and Stiros, S. (2007). “Measurement of deflections and of oscillation frequencies of engineering structures using robotic theodolites (RTS)." Engineering Structures, 29, 3312-3324.
156. Rainer, J. H. (1979). “Dynamic testing of civil engineering structures." 3rd Canadian Conference on Earthquake Engineering
157. Reese, R. T., and Kawahara, W. A. (1993). Handbook on structural testing, Fairmont Press, Inc., Bethel, CT.
158. Reynolds, P., and Pavic, A. (2000). “Impulse hammer versus shaker excitation for the modal testing of building floors." Experimental Techniques, 24(3), 39-44.
159. Reynolds, P., and Pavic, A. (2006). “Vibration performance of a large cantilever grandstand during an international football match." ASCE Journal of Performance of Construction Facilities, 20(3), 202-212.
160. Reynolds, P., Pavic, A., and Carr, J. (2007). “Experimental dynamic analysis of the Kingston communications stadium." The Structural Engineer, 85(8), 33-39.
161. Richards, J. G. (1999). “The measurement of human motion: A comparison of commercially available systems." Human Movement Science, 18, 589-602.
162. Rossi, G., Marsili, R., Gusella, V., and Gioffre, M. (2002). “Comparison between accelerometer and laser vibrometer to measure traffic excited vibrations on bridges." Shock and Vibration, 9(1-2), 11-18.
163. Rubin, S. (1980). “Ambient vibration survey of offshore platform." ASCE Journal of Engineering Mechanics, 106(3), 425-441.
164. Rutledge, D. R., and Meyerholtz, S. Z. (2005). “Performance monitoring of Libby dam with a differential global positioning system." 25th United States Society on Dams (USSD) Annual Meeting, Salt Lake City, Utah.
165. Safford, F. B., and Masri, S. F. (1981). “Development and use of a pulse train generator." Proceedings of the Second Specialty Conference on Dynamic Response of Structures: Experimentation, Observation, Prediction and Control, Atlanta, GA.
166. Sanayei, M. and Javdekar C. N., “Sensor Placement for Parameter Estimation of Structures using Fisher Information Matrix," Proceedings of 7th International Conference on Applications of Advanced Technology in Transportation (AATT 2002), Cambridge, MA, August 5-7 2002, pp. 386-393.
167. Schiff, A. J. (1972). “Identification of large structures using data from ambient and low level excitations." Annual meeting of the ASME, system identification of vibrating structures: Mathematical models from test data, W. Pilkey and R. Cohen, eds., American Society of Mechanical Engineers, New York, NY, 87-120.
168. Severn, R. T., Jeary, A. P., and Ellis, B. R. (1980). “Forced vibration tests and theoretical studies on dams." Institution of Civil Engineers, Part 2, 69(3), 605-634.
169. Singh, V., Wang, M. L., and Lloyd, G. M. (2005). “Measuring and modeling of corrosion in structural steels using magnetoelastic sensors." Smart Materials and Structures, 14(3), S24-S31.
170. Siringoringo, D. M., and Fujino, Y. (2006). “Observed dynamic performance of the Yokohama Bay bridge from system identification using seismic records." Journal of Structural Control and Health Monitoring, 13(1), 226-244.
171. Soh, C. K., Tseng, K. K. H., Bhalla, S., and Gupta, A. (2000). “Performance of smart piezoceramic patches in health monitoring of a RC bridge." Smart Materials and Structures, 9(4), 533-542.
172. Sohn, H., Farrar, C. R., Hemez, F. M., Czarnecki, J. J., Shunk, D. D., Stinemates, D. W., and Nadler, B. R. (2004). A review of structural health monitoring literature: 1996-2001, LA-13976-MS, Los Alamos National Laboratory, Los Alamos, NM.
173. Spencer, B. F., Ruiz-Sandoval, M. E., and Kurata, N. (2004). “Smart sensing technology: Opportunities and challenges." Journal of Structural Control and Health Monitoring, 11(4), 349-368.
174. Spidsoe, N., and Hilmarsen, B. (1983). “Measured dynamic behavior of north sea gravity platforms under extreme environmental conditions." 15th Offshore Technology Conference, Houston, TX.
175. Srinivasan, M. G. (1984). Dynamic testing of as-built civil engineering structures - a review and evaluation, NUREC/CR 3649, Office of Nuclear Regulatory Research, Washington, DC.
176. Stephen, G. A., Brownjohn, J. M. W., and Taylor, C. (1993). “Measurements of static and dynamic displacement from visual monitoring of the Humber bridge." Journal of Wind Engineering and Industrial Aerodynamics, 15, 197-208.
177. Stiemer, S. F., Taylor, P., and Vincent, D. H. C. (1988). “Full-scale dynamic testing of the Annacis bridge." Proceedings IABSE, 12(P-122), 1.
178. Straser, E. G., and Kiremidjian, A. S. (1998). A modular, wireless damage monitoring system for structures, 128, John A. Blume Engineering Center, Stanford, CA.
179. Sumitro, S., Kurokawa, S., Shimano, K., and Wang, M. L. (2005). “Monitoring based maintenance utilizing actual stress sensory technology." Smart Materials and Structures, 14, S68-S78.
180. Talbot, M., and Stoyanoff, S. (2005). “Full-scale modal measurement of the Ile d’Orleans suspension bridge." Experimental Vibration Analysis for Civil Engineering Structures, Bordeaux, France.
181. Tamura, Y., Matsui, M., Pagnini, L. C., Ishibashi, R., and Yoshida, A. (2002). “Measurement of wind-induced response of buildings using RTK-GPS." Journal of Wind Engineering and Industrial Aerodynamics, 90(12-15), 1783-1793.
182. Tanaka, A., Yoshizawa, S., Osawa, Y., and Morisishita, T. (1969). “Period and damping of vibration in actual buildings during earthquakes." Bulletin of the Earthquake Research Institute, 47, 1073-1092.
183. Todd, M. D., Johnson, G. A., Althouse, B. A., and Vohra, S. T. (1998). “Flexural beam-based fiber Bragg grating accelerometers." Photonics Technology Letters, 10(11), 1605-1607.
184. Todd, M. D., Nichols, J. M., Trickey, S. T., Seaver, M., and Nichols, C. J. (2007). “Bragg grating-based fiber optic sensors in structural health monitoring." Philosophical Transactions of the Royal Society of London, Series A, Mathematical and Physical Sciences, 365, 317-344.
185. Trifunac, M. D. (1972). “Comparisons between ambient and forced vibration experiments." Earthquake Engineering and Structural Dynamics, 1, 133-150.
186. Udd, E. (1995). Fiber optic smart structures, John Wiley and Sons, New York, NY.
187. Udwadia, F. E., and Trifunac, M. D. (1974). “Ambient vibration tests on full-scale structures." 5th World Conference on Earthquake Engineering, Rome.
188. United States Coastguard and Geodetic Survey. (1936). Earthquake investigations in California, 1934-1935, 201, United States Department of Commerce, Washington, DC.
189. Usher, J., Burch, R. F., and Guralp, C. (1979). “Wide-band feedback seismometers." Physics of the Earth and Planetary Interiors, 18(2), 38-50.
190. Ventura, C. E., Felber, A. J., and Stiemer, S. F. (1996). “Determination of the dynamic characteristics of the Colquitz River bridge by full-scale testing." Canadian Journal of Civil Engineering, 23(2), 536-548.
191. Wemer, S. D., Beck, J. L., and Levine, B. (1987). “Seismic response evaluation of Meloland Road overpass using 1979 imperial valley earthquake records." Earthquake Engineering and Structural Dynamics, 15(249), 274.
192. Wong, K. Y., Man, K. L., and Chan, W. Y. (2001). “Monitoring Hong Kong’s bridges: Real-time kinematic spans the gap." GPS World, 12(7), 10-18.
193. Wood, C. J. (1982). Calibration of a TW 8204 combined wind speed and direction sensor for danjay designs, 1417/82, Department of Engineering Science, University of Oxford, Oxford, UK.
194. Worden, K., and Burrows, A. P. (2001). “Optimal sensor placement for fault detection." Engineering Structures, 23(8), 685-901.
195. Wu, Z. S., and Yang, C. Q. (2005). “Self-diagnosis of hybrid CFRP sheetsstrengthened structures." Smart Materials and Structures, 14, 39-51.
196. Yanev, B. (2003). “Structural health monitoring as a bridge management tool." SHMII: Structural Health Monitoring and Intelligent Infrastructure, Swets and Zeitlinger
197. Yang, C. Q., and Wu, Z. S. (2006). “Self-structural health monitoring function of RC structures with HCFRP." Journal of Intelligent Material Systems and Structures, 17(10), 895-906.
198. Yu, F., and Gupta, N. (2005). “An efficient model for improving performance of vibrating wire instruments." Measurement, 37(3), 278-283.
199. Zasso, A., Vergani, M., Bocciolione, M., and Evans, R. (1993). “Use of a newly designed optometric instrument for long term, long distance monitoring of structures, with an example of its application on the Humber bridge." 2nd International Conference on Bridge Management, University of Surrey, UK.
200. Zaurin, R., and Catbas, F. N. (2010). “Integration of computer imaging and sensor data for structural health monitoring of bridges." Smart Materials and Structures, 19(1), 1-15.
201. Zaurin, R. and Catbas, F.N., (2011) “Structural Health Monitoring Using Computer Vision and Influence Lines” Structural Health Monitoring Journal, SAGE Publications, Volume 10 Issue 3 May 2011 pp. 309 - 332
202. Zhang, X., and Brownjohn, J. M. W. (2004). “Effect of relative amplitude on bridge deck flutter." Journal of Wind Engineering and Industrial Aerodynamics, 92(6), 493-508.
203. Aktan, A. E., Farhey, D. N., Helmicki, A. J., Brown, D. L., Hunt, V. J., Lee, K. L., and Levi, A. (1997). “Structural identification for condition assessment: Experimental arts." Journal of Structural Engineering, 123(12), 1674-1684.
204. Barnett, V., and Lewis, T. (1998). Outliers in statistical data, John Wiley & Sons Ltd, West Sussex, UK.
205. Bentz, A., and Kijewski-Correa, T. (2009). “A wavelet-based framework for system identification of tall buildings under transient wind events." Proceedings of the 2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, Blacksburg, VA.
206. Box, G. E. P., and Jenkins, G. M. (1970). Time series analysis, forecasting, and control, Holden-Day, San Francisco, CA.
207. Bradley, P. S., and Fayyad, U. M. (1998). “Refining initial points for K-means clustering." 15th International Conference on Machine Learning, San Francisco, CA.
208. Brownjohn, J. M. W., Moyo, P., Omenzetter, P., and Chakraboorty, S. (2004). “Interpreting data from bridge performance and health monitoring systems." International Association for Bridge and Structural Engineering, Kyoto, Japan.
209. Chen, J., Xu, Y. L., and Zhang, R. C. (2004). “Modal parameter identification of tsing ma suspension bridge under typhoon victor: EMD-HT method." J.Wind Eng.Ind.Aerodyn., 92(10), 805-827.
210. Cheng, H., Chen, H., Jiang, G., and Yoshihira, K. (2007). “Nonlinear feature selection by relevance feature vector machine." Machine learning and data mining in pattern recognition, lecture notes in computer science, P. Perner, ed., Springer, Berlin/Heidelberg, 144-159.
211. Chui, C. K. (1992). Introduction to wavelets, Academic Press, San Diego, CA.
212. Crawley, E. F., and O’Donnell, K. J. (1986). “Identification of nonlinear system parameters in joints using the force-state mapping technique." American Institute of Aeronautics and Astronautics Journal, 24(1), 155-162.
213. Dash, M., and Liu, H. (1997). “Feature selection for classification." Intelligent Data Analysis, 1(3), 131-156.
214. Daubechies, I. (1992). Ten lectures on wavelets, Society for Industrial and Applied Mechanics, Philadelphia.
215. Evgeniou, T., Pontil, M., Papageorgiou, C., and Poggio, T. (2003). “Image representations and feature selection for multimedia database search." IEEE Transactions on Knowledge and Data Engineering, 15(4), 911-920.
216. Francois, D. (2007). “High-dimensional data analysis: Optimal metrics and feature selection." PhD Dissertation, Universite Catholique de Louvain, Louvain-la-Neuve, Belgium.
217. Gul, M., and Catbas, F. N. (2009). “Statistical pattern recognition using time series modeling for structural health monitoring: Theory and experimental verifications." Mechanical Systems and Signal Processing, 23(7), 2192-2204.
218. Gurley, K., and Kareem, A. (1999). “Applications of wavelet transform in earthquake, wind and ocean engineering." Engineering Structures, 21(2), 149-167.
219. Guyon, I., and Elisseff, A. (2003). “An introduction to variable and feature selection." Journal of Machine Learning Research, 3, 1157-1182.
220. Guyon, I., Weston, J., Barnhill, S., and Vapnik, V. (2002). “Gene selection for cancer classification using support vector machines." Journal of Machine Learning Research, 46(1-3), 389-422.
221. Hermes, L., and Buhmann, J. M. (2000). “Feature selection for support vector machines." 15th International Conference on Pattern Recognition
222. Hou, Z. K., Noori, M., and Amand, R. S. (2000). “Wavelet-based approach for structural damage detection." ASCE Journal of Engineering Mechanics, 126(7), 677-683.
223. Hsu, C. W., Chang, C. C., and Lin, C. J. (2003). A practical guide to support vector classification, National Taiwan University, Taipei City, Taiwan.
224. Huang, N. E., and et al. (1998). “The empirical mode decomposition and the Hilbert spectrum for non-linear and non-stationary time series analysis." Philosophical Transactions of the Royal Society of London, Series A, Mathematical and Physical Sciences, 454, 903-995.
225. Hubert, M., and Verbovney, S. (2003). “A robust PCR method for high-dimensional regressors." Journal of Chemometrics, 17(438), 452.
226. Jang, J. H., Yeo, I., Shin, S., and Chang, S. P. (2002). “Experimental investigation of system-identification-based damage assessment on structures." ASCE Journal of Structural Engineering, 128(5), 673-682.
227. Kijewski, T., and Kareem, A. (2003). “Wavelet transforms for system identification in civil engineering." Computer-Aided Civil and Infrastructure Engineering, 18, 339-355.
228. Kijewski-Correa, T., and Kareem, A. (2004). “Time-frequency perspectives in the analysis and interpretation of ground motions and structural response." Proceedings of 13th World Conference on Earthquake Engineering, Vancouver, BC.
229. Kijewski-Correa, T., Kilpatrick, J., Kareem, A., Kwon, D. K., Bashor, B., Kochly, M., Young, B. S., Abdelrazaq, A., Galsworth, J. K., Isyumov, N., Morrish, D., Sinn, R. C., and Baker, W. F. (2006). “Validating wind-induced response of tall buildings: Synopsis of the Chicago full-scale monitoring program." ASCE Journal of Structural Engineering, 132(10), 1509-1523.
230. Kijewski-Correa, T., and Kochly, M. (2007). “Monitoring the wind-induced response of tall buildings: GPS performance and the issue of multipath effects." Journal of Wind Engineering and Industrial Aerodynamics, 95(9-11), 1176-1198.
231. Kijewski-Correa, T., and Pirnia, J. D. (2007). “Dynamic behavior of tall buildings under wind: Insights from full-scale monitoring." Structural Design of Tall and Special Buildings, 16, 471-486.
232. Kijewski-Correa, T., and Su, S. (2009). “BRAIN: A bivariate data-driven approach to damage detection in multi-scale wireless sensor networks." Smart Structures and Systems, 5(4), 415-426.
233. Kijewski-Correa, T., and Kareem, A. (2006). “Efficacy of Hilbert and wavelet transforms for time-frequency analysis." J.Eng.Mech., 132(10), 1037-1049.
234. Kijewski-Correa, T., and Kareem, A. (2007). “Nonlinear signal analysis: Timefrequency perspectives." J.Engrg.Mech., 133(2), 238-245.
235. Kohavi, R., and John, G. (1998). “The wrapper approach." Feature extraction construction and selection: A data mining perspective, H. Liu and H. Motoda, eds., Kluwer Academic Publishers, Norwell, MA, 33-50.
236. Kohavi, R., and Sommerfield, D. (1995). “Feature subset selection using the wrapper model: Overfitting and dynamic search space topology." 1st International Conference on Knowledge Discovery and Data Mining
237. Leontaritis, I. J., and Billings, S. A. (1985). “Input-output parametric models for nonlinear systems, part I: Determininistic nonlinear systems." International Journal of Control, 41(3.2, 6.3), 303-328.
238. Li, Q. S., and Wu, J. R. (2007). “Time-frequency analysis of typhoon effects on a 79 storey building." Journal of Wind Engineering and Industrial Aerodynamics, 95, 1648-1666.
239. Liu, Y., and Zheng, Y. F. (2006). “FS_SFS: A novel feature selection method for support vector machines." Pattern Recognition, 39(7), 1333-1345.
240. Loh, C. H., and Duh, J. Y. (1996). “Analysis of nonlinear system using NARMA models." JSCE Journal, 13, 11-21.
241. Masri, S. F., Bekey, G. A., Sassi, H., and Caughey, T. K. (1982). “Non-parametric identification of a class of non-linear multidegree dynamic systems." Earthquake Engineering and Structural Dynamics, 10, 1-30.
242. Molina, L. C., Belanche, L., and Nebot, A. (2002). “Feature selection algorithms: A survey and experimental evaluation." IEEE International Conference on Data Mining, Maebashi City, Japan.
243. Nair, K. K., Kiremidjian, A. S., and Law, K. H. (2006). “Time series based damage detection and localization algorithm with application to the ASCE benchmark structure." Journal of Sound and Vibration, 291(1), 349-368.
244. Omenzetter, P., and Brownjohn, J. M. W. (2004). “Application of time series and kalian filtering for structural health monitoring of a bridge." 2nd European Workshop on Structural Health Monitoring, Munich, Germany.
245. Omenzetter, P., and Brownjohn, J. M. W. (2006). “Application of time series analysis for bridge health monitoring." Smart Materials and Structures, 15, 129-138.
246. Omenzetter, P., Brownjohn, J. M. W., and Moyo, P. (2004). “Identification of unusual events in multi-channel bridge monitoring data." Mechanical Systems and Signal Processing, 18, 409-430.
247. Palumbo, P., and Piroddi, L. (2001). “Seismic behavior of buttress dams: Nonlinear modeling of a damaged buttress based on ARX/NARX models." Journal of Sound and Vibration, 239, 405-422.
248. Pines, D., and Salvino, L. (2006). “Structural health monitoring using empirical mode decomposition and the Hilbert phase." J.Sound Vibrat., 294(1-2), 97-124.
249. Posenato, D., Lanata, F., Inaudi, D., and Smith, I. F. C. (2008). “Model-free data interpretation for continuous monitoring of complex structures." Advanced Engineering Informatics, 22(1), 135-144.
250. Rakotomamonjy, A. (2003). “Variable selection using SVM-based criteria." Journal of Machine Learning Research, 3, 1357-1370.
251. Raphael, B., and Smith, I. F. C. (2003). “A direct stochastic algorithm for global search." Journal of Applied Mathematics and Computation, 146(2-3), 729-758.
252. Safak, E. (1991). “Identification of linear structures using discrete-time filters." Journal of Structural Engineering, 117(10), 3064-3085.
253. Saitta, S., Kripakaran, P., Raphael, B., and Smith, I. F. C. (2010). “Feature selection using stochastic search: An application to system identification." Journal of Computing in Civil Engineering, 24(1), 3-10.
254. Sohn, H., Czarneski, A., and Farrar, C. R. (2000). “Structural health monitoring using statistical process control." Journal of Structural Engineering, 126(11), 1356-1363.
255. Sohn, H., and Farrar, C. R. (2001). “Damage diagnosis using time series analysis of vibration signals." Smart Materials Structures, 10(3), 446.
256. Stone, M. (1974). “Cross-validatory choice and assessment of statistical predictions." Journal of the Royal Statistical Society, 36(2), 111-147.
257. Su, S., and Kijewski-Correa, T. (2007). “Performance verification of bivariate regressive adaptive index for structural health monitoring." SPIE’s 12th Annual International Symposium on NDE for Health Monitoring and Diagnostics, SPIE, San Diego, CA.
258. Tan, P. N., Steinbach, M., and Kumar, V. (2006). Introduction to data mining, Addison-Wesley, Boston, MA.
259. Weston, J., Mukherjee, S., Chapelle, O., Pontil, M., Poggio, T., and Vapnik, V. (2001). “Feature selection for SVMs." Advances in neural information processing systems 13, T. K. Leen, T. G. Dietterich and V. Tresp, eds., MIT Press, Cambridge, MA, 1.
260. Witten, I., and Frank, E. (2005). Data mining: Practical machine learning tools and techniques with java implementations, Morgan Kaufman Publishers, San Francisco, CA.
261. Aktan, A. E., Farhey, D. N., Helmicki, A. J., Brown, D. L., Hunt, V. J., Lee, K. L., and Levi, A. (1997). “Structural identification for condition assessment: Experimental arts." Journal of Structural Engineering, 123(12), 1674-1684.
262. Aktan, A. E., Helmicki, A. J., and Hunt, V. J. (1998). “Issues in health-monitoring for intelligent infrastructure." Smart Materials and Structures, 7(5), 674-692.
263. Alimoradi, A., Miranda, E., Taghavi, S., and Naeim, F. (2006). “Evolutionary modal identification utilizing coupled shear-flexural response-implication for multistory buildings. part I: Theory." The Structural Design of Tall Buildings, 15, 51-65.
264. Alimoradi, A., and Naeim, F. (2006). “Evolutionary modal identification utilizing coupled shear-flexural response-implication for multistory buildings. part II: Application." The Structural Design of Tall Buildings, 15, 67-103.
265. Allemang, R. J. (1995). Vibrations: Experimental modal analysis, UC-SDRL-CN-20-263-663/664, University of Cincinnati, Cincinnati, OH.
266. Allemang, R. J., Brown, D. L., and Fladung, W. (1994). “Modal parameter estimation: A unified matrix polynomial approach." 12th International Modal Analysis Conference, Society of Experimental Mechanics, Honolulu, Hawaii.
267. Areemit, N., Yamaguchi, H., Matsumoto, Y., and Ibi, T. (2003). “Model identification of a four story reinforced concrete building under renovation using ambient vibration measurement." Proceedings of Structural Health Monitoring and Intelligent Infrastructure, Tokyo, Japan.
268. Arya, B., Santini, E. M., and Sanayei, M. (1998). “Impact of finite element modeling error in model updating." 2nd World Conference on Structural Control, John Wiley and Sons
269. Bakir, P. G., Reynders, E., and Roeck, G. (2008). “An improved finite element model updating method by the global optimization technique ‘coupled local minimizers’." Computers and Structures, 86(11), 1339-1352.
270. Banan, M. R., and Hjelmstad, K. D. (1994). “Parameter estimation of structures from static response. II: Numerical simulation studies." Journal of Structural Engineering, 120(11), 3259-3283.
271. Baruch, M., and Bar Itzhack, I. Y. (1978). “Optimum weighted orthogonalization of measured modes." AIAA Journal, 16(4), 346-351.
272. Bèack, T. (1996). Evolutionary algorithms in theory and practice: Evolution strategies, evolutionary programming, genetic algorithms, Oxford University Press, New York.
273. Beck, J. L. (1978). Determining models of structures from earthquake records, EERL Report No. 78-01, California Institute of Technology, Pasadena, CA.
274. Beck, J. L., and Jennings, P. (1980). “Structural identification using linear models and earthquake records." Earthquake Engineering and Structural Dynamics, 8, 145-160.
275. Berman, A., and Nagy, E. J. (1983). “Improvement of large analytical model using test data." AIAA Journal, 21(8), 1168-1173.
276. Bernal, D. (2006). “Flexibility-based damage localization from stochastic realization results." Journal of Engineering Mechanics, 132(6), 651-658.
277. Bernal, D., and Gunes, B. (2004). “Flexibility based approach for damage characterization: Benchmark application." Journal of Engineering Mechanics, 130, 61-70.
278. Boller, C., and Staszewski, W. J., Eds. (2004). Proceedings of the second european workshop on structural health monitoring, DEStech Publications, Inc., Lancaster, PA.
279. Brincker, R., Zhang, L., and Andersen, P. (2001). “Modal identification of outputonly systems using frequency domain decomposition." Smart Materials and Structures, 10(3), 441-445.
280. Brock, J. E. (1968). “Optimal matrices describing linear systems." AIAA Journal, 6(7), 1292-1296.
281. Brown, D. L., Allemang, R. J., Zimmerman, R., and Mergeay, M. (1979). Parameter estimation techniques for modal analysis, 790221, SAE International, Warrendale, PA.
282. Brownjohn, J. M. W., Moyo, P., Omenzetter, P., and Lu, Y. (2003). “Assessment of highway bridge upgrading by dynamic testing and finite element model updating." ASCE Journal of Bridge Engineering, 8(3), 162-172.
283. Burdet, O. (1993). “Load testing and monitoring of swiss bridges." Safety and Performance Concepts, Bulletin 219, Lausanne, Switzerland.
284. Caicedo, J. M., Dyke, S. J., and Johnson, E. A. (2004). “Natural excitation technique and eigensystem realization algorithm for phase i of the IASC-ASCE benchmark problem: Simulated data." ASCE Journal of Engineering Mechanics, 130(1), 49-60.
285. Campbell, S., Kwok, K. C. S., and Hitchcock, P. A. (2005). “Dynamic characteristics and wind-induced response of two high-rise residential buildings during typhoons." J.Wind Eng.Ind.Aerodyn., 93, 461.
286. Casciati, F., Ed. (2003). Proceedings of third world conference on structural control, John Wiley and Sons, Chichester, West Sussex, UK.
287. Catbas, F. N., Gul, M., and Burkett, J. (2008). “Conceptual damage-sensitive features for structural health monitoring: Laboratory and field demonstrations." Mechanical Systems and Signal Processing, 22(7), 1650-1669.
288. Catbas, F. N., Brown, D. L., and Aktan, A. E. (2004). “Parameter estimation for multiple-input multiple-output modal analysis of large structures." Journal of Engineering Mechanics, 130(8), 921-930.
289. Catbas, F. N., Ciloglu, S. K., Hasancebi, O., Grimmelsman, K. A., and Aktan, A. E. (2007). “Limitations in structural identification of large constructed structures." Journal of Structural Engineering, 133(8), 1051-1066.
290. Celebi, M. (1993). “Seismic response of eccentrically braced tall building." Journal of Structural Engineering, 119(4), 1188-1205.
291. Celebi, M. (1996). “Comparison of damping in buildings under low-amplitude and strong motions." Journal of Wind Engineering and Industrial Aerodynamics, 59(2-3), 309-323.
292. Celebi, M. (2006). “Recorded earthquake responses from the integrated seismic monitoring network of the Atwood building, anchorage, alaska." Earthquake Spectra, 22(4), 847-864.
293. Chang, F. K., Ed. (2005). Proceedings of the fifth international workshop on structural health monitoring, Stanford University, Palo Alto, CA.
294. Chen, J. C., and Garba, J. A. (1988a). “On-orbit damage assessment for large space structures." AIAA Journal, 26(9), 1119-1126.
295. Chen, J. C., and Garba, J. A. (1988b). “Structural damage assessment using a system identification technique." Structural safety evaluation based on system identification approaches, H. G. Natke and J. T. P. Yao, eds., Friedr. Vieweg & Sohn, Braunschweig, Wiesbaden, Germany, 1.
296. Ching, J., Beck, J. L., and Porter, K. A. (2006). “Bayesian state and parameter estimation of dynamical systems." Probabilistic Engineering Mechanics, 21(1), 81-96.
297. Chou, J. H., and Ghaboussi, J. (2001). “Genetic algorithm in structural damage detection." Computers and Structures, 79, 1335-1353.
298. Cobb, R. G., and Liebst, B. S. (1997a). “Sensor placement and structural damage identification from minimal sensor information." AIAA Journal, 35(2), 369-374.
299. Cobb, R. G., and Liebst, B. S. (1997b). “Structural damage identification using assigned partial eigenstructure." AIAA Journal, 35(1), 152-158.
300. Cole, H. A. (1973). On-line failure detection and damping measurement of aerospace structures by random decrement signatures, NASA CR-2205, NASA, Washington, DC.
301. Davenport, A. G., and Hill-Carroll, P. (1986). “Damping in tall buildings: Its variability and treatment in design." Building motion in wind, N. Isyumov and T. Tschanz, eds., ASCE, New York, 42-57.
302. Deblauwe, F., Allemang, R. J., and Allemang, R. J. (1985). “The polyreference timedomain technique." 10th International Seminar on Modal Analysis, Part IV, Katholieke Universiteit, Leuven, Belgium.
303. Doebling, S. W., Farrar, C. R., and Prime, M. B. (1998). “A summary review of vibration-based damage identification methods." Shock and Vibration Digest, 30(2), 91-105.
304. Doebling, S. W. (1996). “Minimum-rank optimal update of elemental stiffness parameters for structural damage identification." AIAA Journal, 34(12), 2615-2621.
305. Duan, Z., Yan, G., Ou, J., and Spencer, B. F. (2005). “Damage localization in ambient vibration by constructing proportional flexibility matrix." Journal of Sound and Vibration, 284, 455-466.
306. Durrani, A. J., Mau, S. T., AbouHashish, A. A., and Li, Y. (1994). “Earthquake response of flat-slab buildings." Journal of Structural Engineering, 120, 947-964.
307. Erwin, S., Kijewski-Correa, T., and Yoon, S. Y. (2007). “Full-scale verification of dynamic properties from short duration records." Structures Congress 2007, Long Beach, CA.
308. Fang, J. Q., Li, Q. S., Jeary, A. P., and Liu, D. K. (1999). “Damping of tall buildings: Its evaluation and probabilistic characteristics." The Structural Design of Tall Buildings, 8, 145.
309. Farrar, C. R., and Jauregui, D. A. (1998). “Comparative study of damage identification algorithms applied to a bridge: I. experiment." Smart Materials and Structuresand, 7(5), 704-719.
310. Farrar, C. R., Sohn, H., Hemez, F. M., Anderson, M. C., Bement, M. T., Corwell, P. J., Doebling, S. W., Schultze, J. F., Lieven, N., and Robertson, A. N. (2003). Damage prognosis: Current status and future needs, LA-14051-MS, Los Alamos National Laboratory, Los Alamos, NM.
311. Franco, G., Betti, R., and Lus, H. (2004). “Identification of structural systems using an evolutionary strategy." ASCE Journal of Engineering Mechanics, 130(10), 1125-1139.
312. Frangopol, D. M., and Liu, M. (2007). “Maintenance and management of civil infrastructure based on condition, safety, optimization." Structure and Infrastructure Engineering: Maintenance, Management, Life-Cyle Design and Performance, 3, 29-41.
313. Friswell, M. I., and Mottershead, J. E. (1995). Finite element modal updating in structural dynamics, Kluwer Academic Publishers, Dordrecht, The Netherlands.
314. Friswell, M. I., Penny, J. E. T., and Garvey, S. D. (1998). “A combined genetic and eigensensitivity algorithm for the location of damage in structures." Computers and Structures, 69(8), 547-556.
315. Ghanem, R., and Shinozuka, M. (1995). “Structural-system identification. I: Theory." Journal of Engineering Mechanics, 121(2), 255-264.
316. Goldberg, D. E. (1989). Genetic algorithms in search, optimization and machine learning, Addison-Wesley Longman, Reading, MA.
317. Guo, S. J. (2002). “Improvement of a tail-plane structural model using vibration test data." Journal of Sound and Vibration, 256(4), 647-663.
318. Gurley, K., and Kareem, A. (1999). “Applications of wavelet transform in earthquake, wind and ocean engineering." Engineering Structures, 21(2), 149-167.
319. Hashimoto, P. S., Steele, L. K., Johnson, J. J., and Mensing, R. W. (1993). Review of structural damping values for elastic seismic analysis of nuclear power plants, NUREG/CR-6011, United States Nuclear Regulatory Commission, Washington, DC.
320. Hemez, F. M. (1993). “Theoretical and experimental correlation between finite element models and modal tests in the context of large flexible space structures." PhD Dissertation, University of Colorado, Boulder, CO.
321. Hjelmstad, K. D., and Shin, S. (1997). “Damage detection and assessment of structures from static responses." ASCE Journal of Engineering Mechanics, 123(6), 568-576.
322. Hoshiya, M., and Saito, E. (1984). “Structural identification by extended kalman filter." Journal of Engineering Mechanics, 110(12), 1757-1772.
323. Housner, G. W., Bergman, L. A., Caughey, T. K., Chassiakos, A. G., Claus, R. O., Masri, S. F., Skelton, R. E., Soong, T. T., Spencer, B. F., and Yao, J. T. P. (1997). “Structural control: Past, present, and future." Journal of Engineering Mechanics, 123(9), 897-971.
324. James, G. H., Carne, T. G., and Lauffer, J. P. (1993). The natural excitation technique for modal parameter extraction from operating wind turbines, SAND92-1666, UC-261, Sandia National Laboratories, Albuquerque, NM.
325. Jang, J. H., Yeo, I., Shin, S., and Chang, S. P. (2002). “Experimental investigation of system-identification-based damage assessment on structures." ASCE Journal of Structural Engineering, 128(5), 673-682.
326. Jeary, A. P. (1992). “Establishing nonlinear damping characteristics from nonstationary response time histories." The Structural Engineer, 70(4), 61-66.
327. Johnson, E. A., and Smyth, A. W., Eds. (2006). Proceedings of the 4th world conference on structural control and monitoring (4WCSCM), International Association for Structural Control and Monitoring/USC, Los Angeles, CA.
328. Juang, J. N. (1994). Applied system identification, PTR Prentice Hall, Englewood Cliffs, NJ.
329. Juang, J. N., and Pappa, R. S. (1985). “An eigensystem realization algorithm for modal parameter identification and model reduction." AIAA Journal of Guidance, Control, and Dynamics, 8(5), 620-627.
330. Kabe, A. M. (1985). “Stiffness matrix adjustment using mode data." AIAA Journal, 23(9), 1431-1436.
331. Kammer, D. C. (1988). “Optimal approximation for residual stiffness in linear system identification." AIAA Journal, 26(1), 104-112.
332. Kaouk, M. (1993). “Finite element model adjustment and damage detection using measured test data." PhD Dissertation, University of Florida, Gainesville, FL.
333. Kijewski-Correa, T., Kilpatrick, J., Kareem, A., Kwon, D. K., Bashor, B., Kochly, M., Young, B. S., Abdelrazaq, A., Galsworthy, J. K., Isyumov, N., Morrish, D., Sinn, R. C., and Baker, W. F. (2006). “Validating wind-induced response of tall buildings: Synopsis of the Chicago full-scale monitoring program." ASCE Journal of Structural Engineering, 132(10), 1509-1523.
334. Kijewski-Correa, T., and Pirnia, J. D. (2007). “Dynamic behavior of tall buildings under wind: Insights from full-scale monitoring." Structural Design of Tall and Special Buildings, 16, 471-486.
335. Kijewski-Correa, T., and Cycon, J. (2007). “System identification of constructed buildings: Current state-of-the-art and future directions." Structural Health Monitoring and Intelligent Infrastructure, Vancouver, Canada.
336. Kijewski-Correa, T., Taciroglu, E., and Beck, J. L. (2008). “System identification of constructed facilities: Challenges and opportunities across hazards." Structures Congress, Vancouver, Canada.
337. Kim, H. M., and Bartkowicz, T. J. (1993). “Damage detection and health monitoring of large space structures." Sound and Vibration, 27(6), 12-17.
338. Kim, H. M., Bartkowicz, T. J., Smith, S. W., and Zimmerman, D. C. (1995). “Structural health monitoring of large structures." 49th Meeting of the Society for Machinery Failure Prevention Technology
339. Kong, J. S., and Frangopol, D. M. (2003). “Life-cycle reliability-based maintenance cost optimization of deteriorating structures with emphasis on bridges." Journal of Structural Engineering, 129(6), 818-828.
340. Lagomarsino, S., and Pagnini, L. C. (1995). Criteria for modeling and predicting dynamic parameters of buildings, ISC-II, Instituto di Scienza Delle Costruzioni, University of Genova, Genova, Italy.
341. Lee, J. J., and Yun, C. B. (2006). “Two-step approaches for effective bridge health monitoring." Structural Engineering and Mechanics, 23(1), 75-95.
342. Li, S. J., Suzuki, Y., and Noori, M. (2004). “Identification of hysteretic systems with slip using bootstrap filter." Mechanical Systems and Signal Processing, 18(4), 781-795.
343. Li, Y., and Mau, S. (1991). “A case study of MIMO system identification applied to building seismic records." Earthquake Engineering and Structural Dynamics, 20, 1045-1064.
344. Li, C., and Smith, S. W. (1994). “A hybrid approach for damage detection in flexible structures." 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
345. Li, C., and Smith, S. W. (1995). “Hybrid approach for damage detection in flexible structures." Journal of Guidance, Control, and Dynamics, 18(3), 419-425.
346. Li, Q. S., Fu, J. Y., Xiao, Y. Q., Li, Z. N., and Ni, Z. H. (2006). “Wind tunnel and full-scale study of wind effects on China’s tallest building." Eng.Struct., 28, 1745-1758.
347. Li, Q. S., Wu, J. R., Liang, S. G., Xiao, Y. Q., and Wong, C. K. (2004). “Full-scale measurements and numerical evaluation of wind-induced vibration of a 63-story reinforced concrete tall building." Eng.Struct., 26, 1779-1794.
348. Li, Q. S., Xiao, Y. Q., and Wong, C. K. (2005). “Full-scale monitoring of typhoon effects on super tall buildings." J.Fluids Struct., 20, 697-717.
349. Li, Q. S., Xiao, Y. Q., Wong, C. K., and Jeary, A. P. (2004). “Field measurements of typhoon effects on a super tall building." Eng.Struct., 26, 233-244.
350. Li, Q. S., Yang, K., Wong, C. K., and Jeary, A. P. (2003). “The effect of amplitudedependent damping on wind-induced vibrations of a super tall building." J.Wind Eng.Ind.Aerodyn., 91, 1175-1198.
351. Lim, T. W. (1994). “Structural damage detection of a planar truss structure using a constrained eigenstructure assignment." 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Hilton Head, SC.
352. Lim, T. W. (1995). “Structural damage detection using constrained eigenstructure assignment." Journal of Guidance, Control, and Dynamics, 18(3), 411-418.
353. Lim, T. W., and Kashangaki, T. A. L. (1994). “Structural damage detection of space truss structure using best achievable eigenvectors." AIAA Journal, 32(5), 1049-1057.
354. Lin, B. C., and Papageorgiou, A. S. (1989). “Demonstration of torsional coupling caused by closely spaced periods: 1984 Morgan Hill earthquake response of the Santa Clara county building." Earthquake Spectra, 5(3), 539-556.
355. Lindner, D. K., and Goff, R. (1993). “Damage detection, location and estimation for space trusses." Proceedings vol. 1917, smart structures and materials 1993: Smart structures and intelligent systems, SPIE, Bellingham, WA, 1028-1039.
356. Lindner, D. K., and Kirby, G. (1994). “Location and estimation of damage in a beam using identification algorithms." 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf. Hilton Head, SC.
357. Lindner, D. K., Twitty, G. B., and Osterman, S. (1993). “Damage detection for composite materials using dynamic response data." ASME Adaptive Structures and Materials Systems, AD 35, 441-448.
358. Liu, M., and Frangopol, D. M. (2004). “Optimal bridge maintenance planning based on probabilistic performance prediction." Engineering Structures, 26(7), 991-1002.
359. Liu, S. C., Ed. (2003). Proceedings of smart systems and NDE for civil infrastructures, SPIE, San Diego, CA.
360. Liu, P. L. (1995). “Identification and damage detection of trusses using modal data." Journal of Structural Engineering, 121(4), 599-608.
361. Ljung, L. (1998). System identification - theory for the user, Prentice Hall, Englewood Cliffs, NJ.
362. Loh, C., and Tou, I. (1995). “A system identification approach to the detection of changes in both linear and non-linear structural parameters." Earthquake Engineering and Structural Dynamics, 24, 85-97.
363. Lu, Y., and Tu, Z. (2005). “Dynamic model updating using combined geneticeigensensitivity algorithm and application in seismic response prediction." Earthquake Engineering and Structural Dynamics, 34(9), 1149-1170.
364. Maia, N. M. M., and Silva, J. M. M., Eds. (1997). Theoretical and experimental modal analysis, John Wiley and Sons, Inc., New York, NY.
365. Mares, C., and Surace, C. (1996). “An application of genetic algorithms to identify damage in elastic structures." Journal of Sound Vibration, 195(2), 195-215.
366. Masri, S. F., Miller, R. K., Saud, A. F., and Caughey, T. K. (1987). “Identification of nonlinear vibrating structures: Part I - formulation." ASME Journal of Applied Mechanics, 54, 918-922.
367. Mau, S. T., and Aruna, V. (1994). “Story drift, shear and OTM estimation from building seismic records." Journal of Structural Engineering, 120, 3366-3385.
368. McVerry, G. H. (1980). “Structural identification in the frequency domain from earthquake records." Earthquake Engineering and Structural Dynamics, 8, 161-180.
369. McVerry, G. H., and Beck, J. L. (1983). Structural identification of JPL building 180 using optimally synchronized earthquake records, EERL Report No. 83-01, California Institute of Technology, Pasadena, CA.
370. Mendel, J. M. (1995). Lessons in estimation theory for signal processing, communications, and control, Prentice Hall, New York, NY.
371. Mita, A., and Hagiwara, H. (2003). “Damage diagnosis of a building structure using support vector machine and modal frequency patterns." Proceedings of Smart Systems and Nondestructive Evaluation for Civil Infrastructures, SPIE, San Diego, CA.
372. Moaveni, B., He, X., Conte, J. P., and de Callafon, R. A. (2008). “Damage identification of a composite beam using finite element model updating." Journal of Computer Aided Civil and Infrastructure Engineering, 23(5), 339-359.
373. Nagarajaiah, S., and Li, Z. (2004). “Time segmented least squares identification of base isolated buildings." Soil Dynamics and Earthquake Engineering, 24, 577-586.
374. Natke, H. G., Tomlinson, G. R., and Yao, J. T. P., Eds. (1993). Proceedings of the international workshop on safety evaluation based on identification approaches related to time variant and nonlinear structures, Friedrich Vieweg and Sohn Verlag, Lambrecht, Germany.
375. Natke, H. G., and Yao, J. T. P., Eds. (1988). Structural safety evaluation based on system identification approaches, Friedrich Vieweg and Sohn Verlag, Braunschweig, Germany.
376. Nisar, A., Werner, S. D., and Beck, J. L. (1992). “Assessment of UBC seismic design provisions using recorded building motions." 10th World Conference on Earthquake Engineering, Madrid, Spain.
377. Oh, B. H., and Jung, B. S. (1998). “Structural damage assessment with combined data of static and model tests." ASCE Journal of Structural Engineering, 124(8), 956-965.
378. Oh, C. K., and Beck, J. L. (2006). “Sparse Bayesian learning for structural health monitoring." 4th World Conference on Structural Control and Monitoring, San Diego, CA.
379. Papageorgiou, A. S., and Lin, B. C. (1989a). “Influence of lateral-load-resisting system on the earthquake response of structures - a system identification study." Earthquake Engineering and Structural Dynamics, 18, 799-814.
380. Papageorgiou, A. S., and Lin, B. C. (1989b). “Study of the earthquake response of the base-isolated law and justice center in Rancho Cucamonga." Earthquake Engineering and Structural Dynamics, 18, 1189-1200.
381. Papageorgiou, A. S., and Lin, B. C. (1991a). “Analysis of recorded earthquake response identification of a multi story structure accounting for foundation interaction effects." Soil Dynamics and Earthquake Engineering, 9, 55-64.
382. Papageorgiou, A. S., and Lin, B. C. (1991b). “Earthquake response of two repaired buildings in past seismic shaking." Soil Dynamics and Earthquake Engineering, 10(5), 236-248.
383. Pavic, A., Brownjohn, J. M. W., and Živanović, S. (2010). “VSATs software for assessing and visualising floor vibration serviceability based on first principles." Structures Congress, ASCE, Orlando, FL.
384. Perera, R., and Ruiz, A. (2008). “A multistage FE updating procedure for damage identification in large-scale structures based on multi-objective evolutionary optimization." Mechanical Systems and Signal Processing, 22, 970-991.
385. Pirnia, J. D., Kijewski-Correa, T., Abdelrazaq, A., Chung, J., and Kareem, A. (2007). “Full-scale validation of wind-induced response of tall buildings: Investigation of amplitude dependent properties." Structures Congress 2007, Long Beach, CA.
386. Rainieri, C., Fabbrocino, G., Manfredi, G., and Cosenza, E. (2007). “Structural monitoring and assessment of the school of engineering main building at University of Naples Federico II." 3rd International Conference on Structural Health Monitoring and Intelligent Infrastructure, Vancouver, BC.
387. Raphael, B., and Smith, I. F. C. (2003). Fundamentals of computer aided engineering, John Wiley and Sons, Chichester, UK.
388. Ravindran, S., Kripakaran, P., and Smith, I. F. C. (2007). “Evaluating reliability of multiple-model system identification." 24th W78 Conference, Maribor, Slovenia.
389. Ricles, J. M. (1991). Nondestructive structural damage detection in flexible space structures using vibration characterization, CR-185670, NASA, Washington, DC.
390. Ricles, J. M., and Kosmatka, J. B. (1992). “Damage detection in elastic structures using vibratory residual forces and weighted sensitivity." AIAA Journal, 30, 2310-2316.
391. Robert-Nicoud, Y., Raphael, B., Burdet, O., and Smith, I. F. C. (2005). “Model identification of bridges using measurement data." Computer-Aided Civil and Infrastructure Engineering, 20(2), 118-131.
392. Robert-Nicoud, Y., Raphael, B., and Smith, I. F. C. (2005). “System identification through model composition and stochastic search." Journal of Computing in Civil Engineering, 19(3), 239-247.
393. Rodgers, J., and Celebi, M. (2006). “Seismic response and damage detection analyses of an instrumented steel moment-framed building." Journal of Structural Engineering, 132(10), 1543-1552.
394. Safak, E. (1989a). “Adaptive modeling, identification, and control of dynamic structural systems. I: Theory." Journal of Engineering Mechanics, 115(11), 2386-2405.
395. Safak, E. (1989b). “Adaptive modeling, identification, and control of dynamic structural systems. II: Applications." Journal of Engineering Mechanics, 115(11), 2406-2425.
396. Safak, E. (1991). “Identification of linear structures using discrete-time filters." Journal of Structural Engineering, 117(10), 3064-3085.
397. Safak, E. (1993). “Response of a 42-story steel-frame building to the Ms=7.1 Loma Prieta Earthquake." Engineering Structures, 15, 403-421.
398. Safak, E., and Celebi, M. (1991). “Seismic response of Transamerica Building: Part II system identification." Journal of Structural Engineering, 117, 2405-2425.
399. Safak, E., and Celebi, M. (1992). “Recorded seismic response of Pacific Park Plaza: Part II- system identification." Journal of Structural Engineering, 118, 1566-1589.
400. Saito, T., and Yokota, H. (1996). “Evaluation of dynamic characteristics of high-rise buildings using system identification techniques." Journal of Wind Engineering and Industrial Aerodynamics, 59, 299-307.
401. Saitta, S., Kripakaran, P., Raphael, B., and Smith, I. F. C. (2008). “Improving system identification using clustering." Journal of Computing in Civil Engineering, 22(5), 292-302.
402. Sanayei, M., Bell, E. S., Jvdekar, C. J., Edelmann, J. L., and Slavsky, E. (2006). “Damage localization and finite element model updating using multi-response NDT data." Journal of Bridge Engineering, (12), 689-699.
403. Sanayei, M., Imbaro, G. R., McClain, J. A. S., and Brown, L. C. (1997). “Structural model updating using experimental static measurements." Journal of Structural Engineering, 123(6), 792-798.
404. Sanayei, M., McClain, J. A. S., Wadia-Fascetti, S., and Santini, E. M. (1999a). “Parameter estimation incorporating modal data and boundary conditions." Journal of Structural Engineering, 125(9), 1048-1055.
405. Sanayei, M., McClain, J. A. S., Wadia-Fascetti, S., and Santini, E. M. (1999b). “Parameter estimation incorporating modal data and boundary conditions." Journal of Structural Engineering, 125(9), 1048-1055.
406. Sanayei, M., and Saletnik, M. J. (1996). “Parameter estimation of structures from static strain measurements." Journal of Structural Engineering, 122(5), 555-562.
407. Sanayei, M., Santini-Bell, E., Javdekar, C. N., and Edelmann, J. L. (2006). “Damage localization and finite element model updating using multi-response NDT data." Journal of Bridge Engineering, 11(6), 688-698.
408. Sanayei, M., and Onipede, O. (1991). “Damage assessment of structures using static test data." AIAA Journal, 29(7), 1174-1179.
409. Sanayei, M., Onipede, O., and Babu, S. R. (1992). “Selection of noisy measurement locations for error reduction in static parameter identification." AIAA Journal, 30(9), 2299-2309.
410. Sanayei, M., and Saletnik, M. J. (1996a). “Parameter estimation of structures from static strain measurements, part I: Formulation." Journal of Structural Engineering-ASCE, 122(5), 555-562.
411. Sanayei, M., and Saletnik, M. J. (1996b). “Parameter estimation of structures from static strain measurements, part II: Error sensitivity analysis." Journal of Structural Engineering-ASCE, 122(5), 563-572.
412. Santini Bell, E., Sanayei, M., Javdekar, C. N., and Slavsky, E. (2007). “Multiresponse parameter estimation for finite-element model updating using nondestructive test data." Journal of Structural Engineering, 133(8), 1067-1079.
413. Santini, E. M., Sanayei, M., Liu, M., and Olson, L. D. (1999). “Bridge foundation stiffness identification using dynamic field measurements." Structures Congress, New Orleans, LA.
414. Santini-Bell, E. (2008). “A bridge condition assessment framework integrating structural health monitoring and intelligent transportation technology." Proceedings of the 2008 Transportation Research Board Annual Meeting, Washington, DC.
415. Satake, N., Suda, K., Arakawa, T., Sasaki, A., and Tamura, Y. (2003). “Damping evaluation using full-scale data of buildings in Japan." J.Struct.Eng., 129(4), 470-477.
416. Sato, T., and Qi, K. (1998). “Adaptive H1 filter: Its application to structural identification." Journal of Engineering Mechanics, 124(11), 1233-1240.
417. Sato, T., and Qi, K. (1999). “Nonlinear structural identification based on H1 filter algorithm." SPIE, 3667, 394-405.
418. Schulz, M. J., Pai, P. F., and Abdelnaser, A. S. (1996). “Frequency response function assignment technique for structural damage identification." 14th International Modal Analysis Conference, Dearborn, MI.
419. Shenton, H. A., and Hu, X. (2006a). “Damage identification based on dead load redistribution: Effect of measurement error." Journal of Structural Engineering, 132(8), 1264-1273.
420. Shenton, H. A., and Hu, X. (2006b). “Damage identification based on dead load redistribution: Methodology." Journal of Structural Engineering, 132(8), 1254-1263.
421. Shmerling, R. Z., and Catbas, F. N. (2009). “Load rating and reliability analysis of an aerial guideways." Journal of Bridge Engineering, 14(4), 247-256.
422. Skolnik, D., Lei, Y., Yu, E., and Wallace, J. (2006). “Identification, model updating, and response prediction of an instrumented 15-story steel-frame building." Earthquake Spectra, 22(3), 781-802.
423. Smith, I. F. C., and Kripakaran, P. (2008). “Model based reasoning for life-cycle structural engineering." IALCCE08, Varenna, Italy.
424. Smith, S. W. (1992). “Iterative use of direct matrix updates: Connectivity and convergence." 33rd AIAA Structures, Structural Dynamics and Materials Conference, Dallas, TX.
425. Smith, S. W., and Beattie, C. A. (1991). Model correlation and damage location for large space truss structures: Secant method development and evaluation, CR-188102, NASA, Washington, DC.
426. Smyth, A. W., and Betti, R., Eds. (2004). Proceedings of the IASC fourth international workshop on structural control, Columbia University, New York, NY.
427. Smyth, A. W., Pei, J. S., and Masri, S. F. (2003). “System identification of the Vincent Thomas suspension Bridge using earthquake inputs." Earthquake Engineering and Structural Dynamics, 32, 339-367.
428. Spanos, P. D., and Zeldin, B. A. (1998). “Generalized random decrement method for analysis of vibration data." Transactions of the ASME, 120, 806-813.
429. Spitznogle, F. R., and et al. (1971). Representation and analysis of sonar signals, vol. 1: Improvements in the complex exponential signal analysis computational algorithm, U1-829401-5, N00014-69-C0315, Office of Naval Research, Arlington, VA.
430. Spitznogle, F. R., and Quazi, A. H. (1970). “Representation and analysis of timelimited signals using a complex exponential algorithm." Journal of the Acoustical Society of America, 47(5), 1150-1155.
431. Tamura, Y., and Suganuma, S. (1996). “Evaluation of amplitude-dependent damping and natural frequency of buildings during strong winds." Journal of Wind Engineering and Industrial Aerodynamics, 59(2-3), 115-130.
432. Tan, R. Y., and Cheng, W. M. (1993). “System identification of a non-classically damped linear system." Computers and Structures, 46, 67-75.
433. Turek, M., and Ventura, C. E. (2007). “A method for implementation of damage detection algorithms for civil SHM systems." 3rd International Conference on Structural Health Monitoring and Intelligent Infrastructure, Vancouver.
434. Van Overchee, P., and de Moore, B. (1996). Subspace identification for linear systems: Theory, implementation and applications, Kluwer Academic Publishers, Dordrecht, Netherlands.
435. Vandiver, J. K., Dunwoody, A. B., Campbell, R. B., and Cook, M. F. (1982). “A mathematical basis for the random decrement vibration signature analysis technique." Journal of Mechanical Design, 104, 307-313.
436. Vold, H., Kundrat, J., Rocklin, G. T., and Russel, R. (1982). A multi-input modal estimation algorithm for mini-computers, 820194, SAE International, Warrendale, PA.
437. Vold, H., and Rocklin, G. T. (1982). “The numerical implementation of a multi-input modal estimation method for mini-computers." 1st International Modal Analysis Conference, Society of Experimental Mechanics, Orlando, FL.
438. Wang, X., Hu, N., Fukunaga, H., and Yao, Z. H. (2001). “Structural damage identification using static test data and changes in frequencies." Engineering Structures, 23(6), 610-621.
439. Werner, S. D., Beck, J. L., and Levine, B. (1987). “Seismic response evaluation of Meloland Road overpass using 1979 Imperial Valley earthquake records." Earthquake Engineering and Structural Dynamics, 15, 249-274.
440. Worden, K., Farrar, C. R., Manson, G., and Park, G. (2007). “The fundamental axioms of structural health monitoring." Philosophical Transactions of the Royal Society of London, Series A, Mathematical and Physical Sciences, 463(2082), 1639-1664.
441. Worden, K., and Lane, A. J. (2001). “Damage identification using support vector machines." Smart Materials and Structures, 10(540), 547.
442. Wu, M., and Smyth, A. W. (2007). “Application of the unscented Kalman filter for nonlinear structure system identification." Structural Control and Health Monitoring, 14, 971-990.
443. Yao, J. T. P., and Natke, H. G. (1994). “Damage detection and reliability evaluation of existing structures." Structural Safety, 15, 3-16.
444. Yoon, S. W., and Ju, Y. K. (2004). “Dynamic properties of tall buildings in Korea." CTBUH 2004, Seoul, Korea.
445. Yoshida, I. (2001). “Damage detection using Monte Carlo filter based on non-Gaussian noise.“Newport Beach, CA.
446. Yoshida, A., and Tamura, Y. (2005). “Response monitoring of tall structures and modal identification." 6th Asia-Pacific Conference on Wind Engineering (APCWEVI), Seoul, Korea.
447. Yoshida, A., Tamura, Y., Tsuruga, T., and Itoh, T. (2004). “System identification of structure for wind-induced responses." International Conference on Noise and Vibration Engineering (ISMA 2004), Leuven, Belgium.
448. Yun, C. B., and Shinozuka, M. (1980). “Identification of nonlinear structural dynamic systems." Journal of Structural Mechanics, 8(2), 187-203.
449. Zhang, H., Foliente, G. C., Yang, Y., and Ma, F. (2002). “Parameter identification of inelastic structures under dynamic loads." Earthquake Engineering and Structural Dynamics, 31(5), 1113-1130.
450. Zhang, L., Kanda, H., Brown, D. L., and Allemang, R. J. (1985). “A polyreference frequency domain method for modal parameter identification." ASME, 85-DET-106, 6.
451. Zimmerman, D. C., and Kaouk, M. (1992). “Eigenstructure assignment approach for structural damage detection." AIAA Journal, 30(7), 1848-1855.
452. Zimmerman, D. C., and Kaouk, M. (1994). “Structural damage detection using a minimum rank update theory." Journal of Vibration and Acoustics, 116, 222-230.
453. Zimmerman, D. C., and Smith, S. W., Eds. (1992). Model refinement and damage location for intelligent structures, Kluwer Academic Publishers, Dordrecht, Netherlands.
454. Aktan, A. E., Ellingwood, B., and Kehoe, B. (2007). “Performance-based engineering of constructed systems." Journal of Structural Engineering, 133(3), 311-323.
455. Moon, F. L, Frangopol, D. M., Catbas, F. N., Aktan, A. E. (2010) “Infrastructure Decision-Making based on Structural Identification," Proceedings, ASCE Structures Congress, p590-596, Orlando, FL, May 12-14.
456. Bentz, A., and Kijewski-Correa, T. (2008). “Predictive models for damping in buildings: The role of structural system characteristics." Structures Congress: 18th Analysis and Computation Specialty Conference, Vancouver, Canada.
457. Bentz, A., Young, B., Kijewski-Correa, T., and Abdelrazaq, A. (2010). “Finite element modeling of common lateral systems in tall buildings: Insights from fullscale monitoring." Structures Congress 2010, ASCE, Orlando, FL.
458. Brincker, R., Ventura, C., and Andersen, P. (2001). “Damping estimation by frequency domain decomposition." Proceedings of International Modal Analysis Conference (IMAC XIX), Kissimmee, FL.
459. Brownjohn, J. M. W., Pan, T. C., and Cheong, H. K. (1998). “Dynamic response of republic plaza, Singapore." Structural Engineer, 76, 221-226.
460. Brownjohn, J. M. W., Pavic, A. and Omenzetter, P. (2004) A Spectral Density Approach for Modelling Continuous Vertical Forces on Pedestrian Structures Due to Walking. Canadian Journal of Civil Engineering, Vol. 31, No. 1, pp. 65-77
461. California Geological Survey. (2007). California geological survey - about CSMIP, (January 4, 2011).
462. CESMD. (2011). Center for engineering strong motion data, (January 4, 2011).
463. Diaz, I.M. and Reynolds, P. (2010) Acceleration feedback control of human-induced floor vibrations. Engineering Structures, Vol. 32, No. 1, January, pp. 163-173
464. De Callafon, R. A., Moaveni, B., Conte, J. P., He, X., and Udd, E. (2008). “General realization algorithm for modal identification of linear dynamic systems." Journal of Engineering Mechanics, 134(9), 712-722.
465. Huang, M. J. (2006). “Utilization of strong-motion records for post-earthquake damage assessment of buildings." International Workshop on Structural Health Monitoring and Damage Assessment, Taichung, Taiwan.
466. Huang, M. J., and Shakal, A. F. (2001). “Structure instrumentation in the California strong motion instrumentation program." Strong motion instrumentation for civil engineering structures, M. Erdik, M. Celebi, V. Mihailov and N. Apaydin, eds., Kluwer, Dordrecht, Netherlands, 17-31.
467. James, G. H., Carne, T. G., and Lauffer, J. P. (1993). The natural excitation technique for modal parameter extraction from operating wind turbines, SAND92-1666, UC-261, Sandia National Laboratories, Albuquerque, NM.
468. Kareem, A., Kijewski, T., and Tamura, Y. (1999). “Mitigation of motion of tall buildings with recent applications." Wind Structures, 2(3), 201-251.
469. Kijewski-Correa, T., and Kareem, A. (2007). “Monitoring serviceability limit states in civil infrastructure: Lessons learned from the Chicago full-scale monitoring experience." Proceedings of 6th International Workshop on Structural Health Monitoring, Palo Alto, CA.
470. Kijewski-Correa, T., Kilpatrick, J., Kareem, A., Kwon, D. K., Bashor, B., Kochly, M., Young, B. S., Abdelrazaq, A., Galsworthy, J. K., Isyumov, N., Morrish, D., Sinn, R. C., and Baker, W. F. (2006). “Validating wind-induced response of tall buildings: Synopsis of the Chicago full-scale monitoring program." ASCE Journal of Structural Engineering, 132(10), 1509-1523.
471. Kijewski-Correa, T., and Kochly, M. (2007). “Monitoring the wind-induced response of tall buildings: GPS performance and the issue of multipath effects." Journal of Wind Engineering and Industrial Aerodynamics, 95(9-11), 1176-1198.
472. Kijewski-Correa, T., and Pirnia, J. D. (2007). “Dynamic behavior of tall buildings under wind: Insights from full-scale monitoring." Structural Design of Tall and Special Buildings, 16, 471-486.
473. Kijewski-Correa, T., and Cycon, J. (2007). “System identification of constructed buildings: Current state-of-the-art and future directions." Structural Health Monitoring and Intelligent Infrastructure, Vancouver, Canada.
474. Kijewski-Correa, T., Taciroglu, E., and Beck, J. L. (2008). “System identification of constructed facilities: Challenges and opportunities across hazards." Structures Congress, Vancouver, Canada.
475. Kijewski-Correa, T., Young, B., Baker, W. F., Sinn, R., Abdelrazaq, A., Isyumov, N., and Kareem, A. (2005). “Full-scale validation of finite element models for tall buildings." CTBUH 7th World Congress, New York.
476. Lin, C. C., Wang, C. E., and Wang, J. F. (2003). “On-line building damage assessment based on earthquake records." Structural Health Monitoring and Intelligent Infrastructure, Tokyo, Japan.
477. Moaveni, B. (2007). “System and damage identification of civil structures." Department of Structural Engineering, UCSD, San Diego, CA.
478. Moaveni, B., He, X., Conte, J. P., and Restrepo, J. I. (2010). “Damage identification study of a seven-story full-scale building slice tested on the UCSD-NEES shake table." Journal of Structural Safety, 32(5), 347-356.
479. NEES@UCLA. (2010). Field vibration testing and analytical studies of a four-story RC building, (January 4, 2011).
480. Ni, Y. Q., & Xia, Y. (2010). A benchmark problem for structural health monitoring of high-rise slender structures, (January 4, 2011).
481. Ni, Y. Q., Xia, Y., Chen, W. H., Ko, J. M., and Liao, W. Y. (2009). “ANCRiSST benchmark problem on structural health monitoring of high-rise slender structures phase I: Reduced-order finite element model." 5th International Workshop on Advanced Smart Materials and Smart Structures Technology, Boston, MA.
482. Ni, Y. Q., Xia, Y., Liao, W. Y., and Ko, J. M. (2009). “Technology innovation in developing the structural health monitoring system for Guangzhou new TV tower." Structural Control and Health Monitoring, 16(1), 73-98.
483. Ni, Y. Q., Xia, Y., Lu, Z. R., and Tam, H. Y. (2008). “Technological issues in developing structural health monitoring for a supertall structure." 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems, Beijing, China.
484. Panagiotou, M., Restrepo, J. I., and Conte, J. P. (2009). “Shake table test of a 7-story full scale building slice - phase I: Rectangular wall." Journal of Structural Engineering, in review.
485. Pavic, A., Brownjohn, J.M.W. and Zivanovic S. VSATs software for assessing and visualizing vibration serviceability based on first principles. ASCE Congress 2010, Orlando, Florida, USA, 12-15 May 2010.
486. Pavic, A. and Willford, M. 2005. Vibration Serviceability of Post-Tensioned Concrete Floors. Appendix G in Post-Tensioned Concrete Floors Design Handbook, 2nd Edition. Technical Report 43. Concrete Society. Slough, UK.
487. Phan, M., Horta, L. G., Juang, J. -., and Longman, R. W. (1992). Identification of linear systems by an asymptotically stable observer, 3164, NASA, Washington, DC.
488. Safak, E. (1991). “Identification of linear structures using discrete-time filters." Journal of Structural Engineering, 117(10), 3064-3085.
489. Sanayei, M. and Javdekar C. N., “Sensor Placement for Parameter Estimation of Structures using Fisher Information Matrix," Proceedings of 7th International Conference on Applications of Advanced Technology in Transportation (AATT 2002), Cambridge, MA, August 5-7 2002, pp. 386-393.
490. Shakal, A. F., and Huang, M. J. (1985). Standard tape format for CSMIP strongmotion data tapes, OSMS 85-03, California Department of Conservation, Division of Mines and Geology, Office of Strong Motion Studies, Sacramento, CA.
491. Shakal, A. F., Huang, M. J., and Graizer, V. M. (2004). “CSMIP strong-motion data processing." COSMOS Invited Workshop on Strong-Motion Record Processing, Richmond, CA.
492. Skolnik, D., Lei, Y., Yu, E., and Wallace, J. (2006). “Identification, model updating, and response prediction of an instrumented 15-story steel-frame building." Earthquake Spectra, 22(3), 781-802.
493. Stewart, J. P., and Fenves, G. (1998). “System identification for evaluating soilstructure interaction effects in buildings from strong motion recordings." Earthquake Engineering and Structural Dynamics, 27(8), 869-885.
494. Stewart, J. P., Seed, R. B., and Fenves, G. (1998). Empirical evaluation of inertial soil-structure interaction effects, Pacific Earthquake Engineering Research Center, University of California, Berkeley, Berkeley, CA.
495. Stewart, J. P., and Stewart, A. F. (1997). Analysis of soil-structure interaction effects on building response from earthquake strong motion recordings at 58 sites, Earthquake Engineering Research Center, University of California, Berkeley, Berkeley, CA.
496. Van Overchee, P., and de Moore, B. (1996). Subspace identification for linear systems: Theory, implementation and applications, Kluwer Academic Publishers, Dordrecht, Netherlands.
497. Van Overschee, P., and DeMoor, B. (1994). “N4SID: Subspace algorithms for the identification of combined deterministic-stochastic systems." Automatica, 30(1), 75-93.
498. Veletsos, A. S., and Verbic, B. (1973). “Vibration of viscoelastic foundations." Earthquake Engineering and Structural Dynamics, 2, 87-102.
499. Wong, K. Y., and Ni, Y. Q. (2009). “Modular architecture of structural health monitoring system." Encyclopedia of structural health monitoring, C. Boller, F. K. Chang and Y. Fujino, eds., John Wiley & Sons, Chichester, UK, 2009-2015.
500. Xia, Y., Ni, Y. Q., Ko, J. M., and Chen, H. B. (2008). “ANCRiSST benchmark problem on structural health monitoring of high-rise slender structures." Proceedings of the 4th International Workshop on Advanced Smart Materials and Smart Structures Technologies, Tokyo, Japan.
501. Xia, Y., Ni, Y. Q., Ko, J. M., Liao, W. Y., and Chen, W. H. (2009). “ANCRiSST benchmark problem on structural health monitoring of high-rise slender structures - phase I: Field vibration measurement." Proceedings of the 5th International Workshop on Advanced Smart Materials and Smart Structures Technology, Boston, MA.
502. Yu, E., Taciroglu, E., and Wallace, J. W. (2007). “Parameter identification of framed structures using an improved finite element model updating method, part I: Formulation and verification." Earthquake Engineering and Structural Dynamics, 36, 619-639.
503. Yu, E., Wallace, J. W., and Taciroglu, E. (2007). “Parameter identification of framed structures using an improved finite element model updating method, part II: Application to experimental data." Earthquake Engineering and Structural Dynamics, 36, 641-660.
504. Zhou, H. F., Ni, Y. Q., Liao, W. Y., Tam, H. Y., and Liu, S. W. (2009). “Structural health monitoring system for steel antenna mast of Guangzhou television and sightseeing tower." Sixth International Conference on Advances in Steel Structures, Hong Kong.
505. AASHTO. (2004). LRFD bridge design specifications, American Society of Highway Transportation Officials, Washington, DC.
506. Abdel-Ghaffar, A. M., and Rubin, L. I. (1983a). “Lateral earthquake response of suspension bridges." ASCE Journal of the Structural Division, 109(3), 664-675.
507. Abdel-Ghaffar, A. M., and Rubin, L. I. (1983b). “Vertical seismic behavior of suspension bridges." International Journal of Earthquake Engineering and Structural Dynamics, 11, 1-19.
508. Abdel-Ghaffar, A. M., and Scanlan, R. H. (1985). “Ambient vibration studies of golden gate bridge: 1. suspended structure, and 2. pier tower structure." Journal of Engineering Mechanics, 111(4), 463.
509. Abdel-Ghaffar, A. M., Scanlan, R. H., and Diehl, J. (1985). Analysis of the dynamic characteristics of the golden gate bridge by ambient vibration measurements, 85-SM-1, Department of Civil Engineering, Princeton University, Princeton, NJ.
510. Analog Devices. (2011). OBSOLETE PRODUCT - ADXL202, (January 4, 2011).
511. ANSYS. (2007). Theory reference for ANSYS and ANSYS workbench, ANSYS, Inc., Canonsburg, PA.
512. Buxton-Tetteh, B. (2004). “Development of user cost model for movable bridge openings in Florida." MS Thesis, Florida State University, Tallahassee, FL.
513. Catbas, F. N., Zaurin, R., Susoy, M., and Gul, M. (2007). Integrative information system design for Florida department of transportation: A framework for structural health monitoring of movable bridges, Florida Department of Transportation, Tallahassee, FL.
514. Catbas, F.N., Zaurin, R., Gul, M. and Gokce, B. (2012a) “Sensor networks, Computer Imaging and Unit Influence Lines for Structural Health Monitoring: A Case Study for Bridge Load Rating," Journal of Bridge Engineering, ASCE, 17(4), 662-670, 2012
515. Catbas, F.N., Gokce, H.B. and Gul, M. (2012b) “Non-parametric Analysis of Structural Health Monitoring Data for Identification and Localization of Changes: Concept, Lab and Real Life Studies," Structural Health Monitoring Journal, 11 (5), 613-626
516. Catbas, F.N., Gul, M. and Gokce, H.B., Frangopol, D. and Grimmelsman, K.A. (2012c) “An Investigation for Issues Related to Condition and Monitoring of Movable Bridges," Structure and Infrastructure Engineering Journal, 2012 (accepted)
517. Chaudhary, M. T. A., Abe, M., Fujino, Y., and Yoshida, J. (2000). “System identification of two base-isolated bridges using seismic records." ASCE Journal of Structural Engineering, 126, 1187-1195.
518. Conte, J. P., He, X., Moaveni, B., Masri, S. F., Caffrey, J. P., Wahbeh, M., Tasbihgoo, F., Whang, D. H., and Elgamal, A. (2008). “Dynamic testing of Alfred Zampa memorial bridge." Journal of Structural Engineering, 134(6), 1006-1015.
519. Darholm, T., Lundh, L., Ronnebrant, R., Karoumi, R., and Blaschko, M. (2007). Technical book about the Svinesund bridge, Vägverket (Swedish Road Administration), Göteborg, Sweden.
520. Goulet, J. A., Kripakaran, P., and Smith, I. F. C. (2010). “Multimodel structural performance monitoring." Journal of Structural Engineering, 136(10), 1309-1318.
521. Grimmelsman, K. A., Pan, Q., and Aktan, A. E. (2007). “Analysis of data quality for ambient vibration testing of the Henry Hudson bridge." Journal of Intelligent Materials, Systems and Structures, 18, 765-775.
522. Gul, M., and Catbas, F. N. (2008). “Ambient vibration data analysis for structural identification and global condition assessment." ASCE Journal of Engineering Mechanics, 134(8), 650-662.
523. He, X., Moaveni, B., Conte, J. P., Elgamal, A., and Masri, S. F. (2009). “System identification of Alfred Zampa memorial bridge using dynamic field test data." Journal of Structural Engineering, 135(1), 54-66.
524. James, G., and Karoumi, R. (2003). Monitoring of the new Svinesund bridge, report 1: Instrumentation of the arch and preliminary results from the construction phase, TRITA-BKN Report 74, Brobyggnad, Royal Institute of Technology (KTH), Stockholm, Sweden.
525. Jonsson, F., and Johnson, D. (2007). “Finite element model updating of the new Svinesund bridge." MS Thesis, Chalmers University of Technology, Göteborg, Sweden.
526. Karoumi, R., and Andersson, A. (2007). Load testing of the new Svinesund bridge: Presentation of results and theoretical verification of bridge behavior, TRITA-BKN Report 96, Brobyggnad, Royal Institute of Technology (KTH), Stockholm, Sweden.
527. Kim, S., Pakzad, S., Culler, D., Demmel, J., Fenves, G. L., Glaser, S., and Turon, M. (2007). “Health monitoring of civil infrastructures using wireless sensor networks." 6th International Conference on Information Processing in Sensor Networks, Cambridge, MA.
528. Koglin, T. L. (2003). Movable bridge engineering, John Wiley and Sons, Hoboken, NJ.
529. Masri, S. F., Miller, R. K., Saud, A. F., and Caughey, T. K. (1987). “Identification of nonlinear vibrating structures: Part I - formulation." ASME Journal of Applied Mechanics, 54, 918-922.
530. Masri, S. F., Sheng, L. H., Caffrey, J., Nigbor, R. L., Wahbeh, M., and Abdel-Ghaffar, A. M. (2004). “Architecture and utilization of a web-based real-time structural health monitoring system." Smart Materials and Structures, 13(6), 1269-1283.
531. Moaveni, B., Barbosa, A. R., Conte, J. P., and Hemez, F. M. (2007). “Uncertainty analysis of modal parameters obtained from three system identification methods." International Conference on Modal Analysis (IMAC-XXV), Orlando, FL.
532. Nagayama, T., Abe, M., Fujino, Y., and Ikeda, K. (2005). “Structural identification of a nonproportionally damped system and its application to a full-scale suspension bridge." Journal of Structural Engineering, 131(10), 1536-1545.
533. Nayeri, R. D., Masri, S. F., and Chassiakos, A. G. (2007). “Use of eigensystem realization algorithm to track structural changes in a retrofitted building based on ambient vibration." ASCE Journal of Engineering Mechanics, 133(12), 1311-1325.
534. Pakzad, S., Fenves, G., Kim, S., and Culler, D. E. (2008). “Design and implementation of scalable wireless sensor network for structural monitoring." ASCE Journal of Infrastructure Engineering, 14(1), 89-101.
535. Pan, Q. (2007). “System identification of constructed civil engineering structures and uncertainty." PhD Dissertation, Drexel University, Philadelphia, PA.
536. Plos, M., and Movaffaghi, H. (2004). Finite element analysis of the new Svinesund bridge: Design model conversion and analysis of the arch launching, Report 04: 12, Chalmers University of Technology, Structural Engineering and Mechanics, Göteborg, Sweden.
537. Prader, J., Zhang, J., Grimmelsman, K. A., Moon, F. L., Grimmelsman, K. A., and Aktan, A. E. (2010). “Challenges and uncertainty mitigation in structural identification of long span bridges." The Fifth International Conference on Bridge Maintenance, Safety and Management (IABMAS’10), Philadelphia, PA.
538. RTA. (2004). Design guidelines for bus transit, Riverside Transit Agency, Riverside, CA.
539. Schlune, H., Plos, M., and Gylltoft, K. (2009). “Improved bridge evaluation through finite element model updating using static and dynamic measurements." Engineering Structures, 31, 1477-1485.
540. Schlune, H., Plos, M., Gylltoft, K., Jonsson, F., and Johnson, D. (2008). “Finite element model updating of a concrete arch bridge through static and dynamic measurements." The Fourth International Conference on Bridge Maintenance, Safety and Management (IABMAS’ 08), Seoul, South Korea.
541. Silicon Designs. (2007). Low noise analog accelerometer, (January 4, 2011).
542. Siringoringo, D. M., and Fujino, Y. (2006). “Observed dynamic performance of the Yokohama Bay bridge from system identification using seismic records." Journal of Structural Control and Health Monitoring, 13(1), 226-244.
543. Siringoringo, D. M., and Fujino, Y. (2007). “Dynamic characteristics of a curved cable-stayed bridge identified from seismic records." Engineering Structures, 29(8), 2001-2017.
544. Siringoringo, D. M., and Fujino, Y. (2008a). “System identification applied to instrumented long-span cable-supported bridges using seismic records." Earthquake Engineering and Structural Dynamics, 37, 361-386.
545. Siringoringo, D. M., and Fujino, Y. (2008b). “System identification of suspension bridge from ambient response measurement." Engineering Structures, 30(2), 462-477.
546. Stahl, F. L., Mohn, D. E., and Currie, M. C. (2007). The golden gate bridge, report of the chief engineer, volume II, Golden Gate Bridge and Transportation District, San Francisco, CA.
547. TinyOS. (2010). TinyOS home page, (January 4, 2011).
548. Ülker-Kaustell, M., and Karoumi, R. (2006). Monitoring of the new Svinesund bridge, report 3: The influence of temperature, wind and damages on the dynamic properties of the bridge, TRITA-BKN. Report 99, Brobygnad, Royal Institute of Technology (KTH), Stockholm, Sweden.
549. Vincent, G. S. (1958). “Golden gate bridge vibration study." ASCE Journal of the Structural Division, 84(ST6), 1.
550. Vincent, G. S. (1962). “Golden gate bridge vibration studies." Transactions of the American Society of Civil Engineers, 127, 667-707.
551. Wahbeh, M., Tasbihgoo, F., Yun, H., Masri, S. F., Caffrey, J., and Chassiakos, A. G. (2005). “Real-time earthquake monitoring of large scale bridge structures." International Workshop on Structural Health Monitoring, Palo Alto, CA.
552. Wallner, M., and Pircher, M. (2007). “Kinematics of movable bridges." Journal of Bridge Engineering, 12(2), 147-153.
553. The yokohama bay bridge, (1991). Metropolitan Expressway Public Corporation, Tokyo, Japan.
554. Yun, H., Nayeri, R. D., Tasbihgoo, F., Wahbeh, M., Caffrey, J., Wolfe, R., Nigbor, R. L., Masri, S. F., Abdel-Ghaffar, A. M., and Sheng, L. H. (2007). “Monitoring the collision of a cargo ship with the Vincent Thomas Bridge." Structural Control and Health Monitoring, 15(2), 183-206.
555. Zhang, J., Prader, J., Grimmelsman, K. A., Moon, F. L., and Aktan, A. E. (2009a). “Mitigation of uncertainty in the structural identification of longspan suspension bridges." The 7th International Workshop on Structural Health Monitoring, Palo Alto, CA.
556. Zhang, J., Prader, J., Grimmelsman, K. A., Moon, F. L., and Aktan, A. E. (2009b). “Challenges in experimental vibration analysis for structural identification and corresponding engineering strategies." International Conference of Experimental Vibration Analysis for Civil Engineering Structures, Wroclaw, Poland.