Design and implementation of scalable wireless sensor network for structural monitoring

Journal of Infrastructure Systems

Volumn 14, Issue 1, 2008, Pages 89-101

  Pakzad, Shamim N ^a   Fenves, Gregory L ^a   Kim, Sukun ^b   Culler, David E ^b  

^a Berkeley   (United States)

^b UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

Design; Implementation; Monitoring; Networks; Sensors

Indexed keywords

ACCELEROMETERS; DAMAGE DETECTION; DATA ACQUISITION; INFORMATION DISSEMINATION; MICROCONTROLLERS; VIBRATION MEASUREMENT; WIRELESS SENSOR NETWORKS;

DATA COLLECTION; MULTIHOP METWORK; VIBRATION MONITORING;

STRUCTURAL HEALTH MONITORING;

ACCELEROMETERS; DAMAGE DETECTION; DATA ACQUISITION; INFORMATION DISSEMINATION; MICROCONTROLLERS; STRUCTURAL HEALTH MONITORING; VIBRATION MEASUREMENT; WIRELESS SENSOR NETWORKS;

ACCELEROMETER; CALIBRATION; DATA ACQUISITION; DATA QUALITY; HARDWARE; MONITORING SYSTEM; SOFTWARE; VIBRATION;

HUMULUS;

EID: 39549092827     PISSN: 10760342     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)1076-0342(2008)14:1(89)     Document Type: Article

References (45)

1. ReferencesAbdel-Ghaffar, A. M., and Scanlan, R. H. (1985a). "Ambient vibration studies of Golden Gate Bridge: I. Suspended structure." J. Eng. Mech. JENMDT0733-9399, 111(4), 463-482.
2. Abdel-Ghaffar, A. M., and Scanlan, R. H. (1985b). "Ambient vibration studies of Golden Gate Bridge: II. Pier-tower structure." J. Eng. Mech. JENMDT0733-9399, 111(4), 483-499.
3. Analog Devices. (1999). "ADXL202 low cost ±2g dual axis iMEMS® accelerometer with duty cycle output." 〈http://www.analog.com/UploadedFiles/Data_Sheets/ ADXL202E.pdf〉.
4. Buonadonna, P. (2003). "Index of/tinyos-1.x/tos/lib/ Broadcast." 〈http://www.tinyos.net/tinyos-1.x/tos/lib/ Broadcast〉.
5. Chipcon Products. (2007). "2.4 GHz IEEE 802.15.4/ZigBee-Ready RF Tranceiver (Rev. B)." 〈http://focus.ti.com/lit/dx/symlink/ cc2420.pdf〉.
6. Crossbow. (2007a). "MICAz, wireless measurement system."
7. Crossbow. (2007b). "iMote2, high-performance wireless sensor network node." 〈http://www.xbow.com/Products/Product_pdf_files/ Wireless_pdf/Imote2_Datasheet.pdf〉.
8. Doebling, S. W., Farrar, C. R., and Prime, M. B. (1998). "A summary review of vibration-based damage identification methods." Shock Vib. Dig. SHVDAN0583-102410.1177/058310249803000201, 30(2), 91-105.
9. Doebling, S. W., Farrar, C. R., Prime, M. B., and Shevitz, D. W. (1996). "Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review." Rep. No. LA-13070-MS, Los Alamos National Laboratory, Los Alamos, N.M.
10. Farrar, C. R. (2001). "Historical overview of structural health monitoring." Lecture notes on structural health monitoring using statistical pattern recognition, Los Alamos Dynamics, Los Alamos, N.M.
11. Hill, J., Gay, D., and Levis, P. (2003). "index of tinyos-1.x/tos/ system." 〈http://www.tinyos.net/tinyos-1.x/tos/system〉.
12. Hill, J., Szewczyk, R., Woo, A., Hollar, S., Culler, D. E., and Pister, K. S. J. (2000). "System architecture directions for networked sensors." Proc., 9th Int. Conf. on Architectural Support for Programming Languages and Operating Systems (ASPLOS 2000), Cambridge, Mass., 93-104.
13. Ihler, E., Zaglauer, W., Herold-Schmidt, U., Dittrich, K. W., and Wiesbeck, W. (2000). "Integrated wireless piezoelectric sensors." Proc. SPIE PSISDG0277-786X, 3(991), 44-51.
14. Juang, J. N., and Phan, M. Q. (2001). Identification and control of mechanical systems, Cambridge University Press, Cambridge, U.K.
15. Kim, S., Fonseca, R., Kumar Dutta, P., Tavakoli, A., Culler, D. E., Levis, P., Shenker, S., and Stoica, I. (2006). "Flush: A reliable bulk transport protocol for multihop wireless network." Technical Rep. No. UCB/EECS-2006-169, University of California, Berkeley, Calif.
16. Kim, S., Pakzad, S. N., Culler, D., Demmel, J., Fenves, G. L., Glaser, S., and Turon, M. (2007). "Health monitoring of civil infrastructures using wireless sensor networks." Proc., 6th Int. Conf. on Information Processing in Sensor Networks (IPSN 2007), Cambridge, Mass.
17. Ljung, L. (1999). System identification-Theory for the user, 2nd Ed., Prentice-Hall, Upper Saddle River, N.J.
18. Lynch, J. P., and Loh, K. J. (2006). "A summary review of wireless sensors and sensor networks for structural health monitoring." Shock Vib. Dig. SHVDAN0583-102410.1177/0583102406061499, 38(2), 91-128.
19. Lynch, J. P., Sundararajan, A., Law, K. H., Kiremidjian, A. S., Carryer, E., Sohn, H., and Farrar, C. R. (2003). "Field validation of a wireless structural health monitoring system on the Alamosa Canyon Bridge." Proc. SPIE PSISDG0277-786X10.1117/12.482712, 5057, 267-278.
20. Lynch, J. P., Wang, Y., Law, K. H., Yi, J.-H., Lee, C. G., and Yun, C. B. (2005). "Validation of a large-scale wireless structural monitoring system on the Geumdang Bridge." Proc., Int. Conf. on Safety and Structural Reliability (ICOSSAR), Rome, Italy.
21. Mainwaring, A., Polastre, J., Szewczyk, R., Culler, D., and Anderson, J. (2002). "Wireless sensor networks for habitat monitoring." Proc., 2002 ACM Int. Workshop on Wireless Sensor Networks and Applications, WSNA'02, Atlanta.
22. Maróti, M., Kusy, B., Simon, G., and Lédeczi, Á. (2004). "The flooding time synchronization protocol." Proc. ACM 2nd Int. Conf. on Embedded Networked Sensor Systems (SenSys 2004), Baltimore, 39-49.
23. Maser, K., Egri, R., Lichtenstein, A., and Chase, S. (1996). "Field evaluation of a wireless global bridge evaluation and monitoring system." Proc., 11th Conf. on Engineering Mechanics, Vol. 2, Fort Lauderdale, Fla., 955-958.
24. Mastroleon, L., Kiremidjiana, A. S., Carryerb, E., and Law, K. H. (2004). "Design of a new power-efficient wireless sensor system for structural health monitoring." Proc. SPIE PSISDG0277-786X, 5395, 51-60.
25. Oppenheim, A. V., and Schafer, R. W. (1999). Discrete-time signal processing, 2nd Ed., Prentice-Hall, Upper Saddle River, N.J.
26. Paek, J., Chintalapudi, K., Cafferey, J., Govindan, R., and Masri, S. (2005). "A wireless sensor network for structural health monitoring: Performance and experience." Proc., 2nd IEEE Workshop on Embedded Network Sensors (EmNetS-II), Sydney, Australia.
27. Pakzad, S. N., and Fenves, G. L. (2004). "Structural health monitoring applications using MEMS sensor networks." Proc., 4th Int. Workshop on Structural Control, Columbia Univ., New York, 47-56.
28. Pakzad, S. N., Kim, S., Fenves, G. L., Glaser, S. D., Culler, D. E., and Demmel, J. W. (2005). "Multipurpose wireless accelerometers for civil infrastructure monitoring." Proc., 5th Int. Workshop on Structural Health Monitoring (IWSHM 2005), Stanford, Calif.
29. Pappa, R. S., Elliott, K. B., and Schenck, A. (1993). "Consistent mode indicator for eigen system realization algorithm." J. Guid. Control Dyn. JGCDDT0731-5090, 16(5), 852-858.
30. Peeters, B., and Roeck, G. D. (2001). "Stochastic system identification for operational modal analysis: A review." J. Dyn. Syst., Meas., Control JDSMAA0022-043410.1115/1.1410370, 123, 659-667.
31. Pei, J.-S., Kapoor, C., Graves-Abe, T. L., Sugeng, Y., and Lynch, J. P. (2005). "Critical design parameters and operating conditions of wireless sensor units for structural health monitoring." Proc., 23rd Int. Modal Analysis Conf. (IMAC XXIII), Orlando, Fla.
32. Ruiz-Sandoval, M., Nagayama, T., and Spencer, B. F. (2006). "Sensor development using Berkeley Mote platform." J. Earthquake Eng. ZZZZZZ1363-2469, 10(2), 289-309.
33. Silicon Design (2007). "Model 1221, low noise analog accelerometer." 〈http://www.silicondesign.com/pdf〉.
34. Smyth, A. W., Pei, J., and Masri, S. F. (2003). "System identification of the Vincent Thomas suspension bridge using earthquake records." Earthquake Eng. Struct. Dyn. IJEEBG0098-884710.1002/ eqe.226, 32, 339-367.
35. Sohn, H., and Farrar, C. R. (2000). "Statistical process control and projection techniques for damage detection." Proc., European COST F3 Conf. on System Identification and Structural Health Monitoring, Madrid, Spain, 105-114.
36. Strubbs, N., Sikorsky, C., Park, S. C., and Bolton, R. (1999). Verification of a methodology to nondestructively evaluate the structural properties of bridges, Structural Health Monitoring Workshop, Stanford Univ., Palo Alto, Calif., 440-449.
37. TinyOS. (2007). "TinyOS community forum, and open-source for the networked sensor regime." 〈http://www.tinyos.net/〉.
38. Tolle, G., (2005). "A macroscope in the redwoods." Proc., 3rd ACM Conf. on Embedded Networked Sensor Systems (Sensys 05), San Diego.
39. Wang, G., and Pran, K. (2000). "Ship hull structure monitoring using fiber optic sensors." Proc., European COST F3 Conf. on System Identification and Structural Health Monitoring, Madrid, Spain, 15-27.
40. Welch, P. D. (1967). "The use of fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms." IEEE Trans. Audio Electroacoust. ITADAS0018-927810.1109/TAU.1967.1161901, 15(2), 70-73.
41. Westermo, B., and Thompson, L. D. (1997). "A peak strain sensor for damage assessment and health monitoring." Structural health monitoring, Current status and perspectives, Stanford University Press, Palo Alto, Calif., 515-526.
42. Williams, E. J., and Messina, A. (1999). "Applications of the multipledamage location assurance criterion." Proc., Int. Conf. on Damage Assessment of Structures, Dublin, Ireland, 256-264.
43. Woo, A., Tong, T., and Culler, D. (2003). "Taming the underlying challenges of reliable multihop routing in sensor networks." Proc., SenSys 2003, Los Angeles.
44. Ying, L., Kiremidjian, A. S., Nair, K. K., Lynch, J. P., and Law, K. H. (2005). "Algorithms for time synchronization of wireless structural monitoring sensors." Earthquake Eng. Struct. Dyn. IJEEBG0098-884710.1002/eqe.432, 34, 555-573.
45. Zimmermann, D. C. (1999). "Looking into the crystal ball: The continued need for multiple viewpoints in damage detection." Damage Assessment of Structures, Proc., Int. Conf. on Damage Assessment of Structures, Dublin, Ireland, 76-90.