A case study for predicting the success possibility of supply chain practices implementation using AHP approach

Journal of Business and Industrial Marketing

Volumn 31, Issue 2, 2016, Pages 137-151

  Gorane, Shrikant ^a   Kant, Ravi ^a  

^a SARDAR VALLABHBHAI NATIONAL INSTITUTE OF TECHNOLOGY   (India)

Author keywords

AHP; Case study; Supply chain management; Supply chain practices

Indexed keywords

EID: 84960380927     PISSN: 08858624     EISSN: None     Source Type: Journal    
DOI: 10.1108/JBIM-05-2014-0098     Document Type: Article

References (65)

1. Agndal, H. and Nordin, F. (2009), “Consequences of outsourcing for organizational capabilities some experiences from best practice”, Benchmarking: An International Journal, Vol. 16 No. 3, pp. 316-334.
2. Angelis, J., Cooper, C. and Gill, C. (2011), “Building a high-commitment lean culture”, Journal of Manufacturing Technology Management, Vol. 22 No. 5, pp. 569-586.
3. Anuar, A. and Yusuff, R.M. (2011), “Manufacturing best practices in Malaysian small and medium enterprises (SMEs)”, Benchmarking: An International Journal, Vol. 18 No. 3, pp. 324-341.
4. Balocco, R., Mogre, R. and Toletti, G. (2009), “Mobile internet and SMEs: a focus on the adoption”, Industrial Management and Data Systems, Vol. 109 No. 2, pp. 245-261.
5. Bhagwat, R. and Sharma, M.K. (2007), “Performance measurement of supply chain management: a balanced scorecard approach”, Computers and Industrial Engineering, Vol. 53 No. 1, pp. 43-62.
6. Bhasin, S. (2011), “Performance of organisations treating lean as an ideology”, Business Process Management Journal, Vol. 17 No. 6, pp. 986-1011.
7. Boubekri, N., Shaikh, V. and Foster, P.R. (2010), “A technology enabler for green machining: minimum quantity lubrication (MQL)”, Journal of Manufacturing Technology Management, Vol. 21 No. 5, pp. 556-566.
8. Boyle, T.A., Scherrer-Rathje, M. and Stuart, I. (2011), “Learning to be lean: the influence of external information sources in lean improvements”, Journal of Manufacturing Technology Management, Vol. 22 No. 5, pp. 587-603.
9. Carr, A.S. and Smeltzer, L.R. (1999), “The relationship of strategic purchasing to supply chain management”, European Journal of Purchasing and Supply Management, Vol. 5 No. 1, pp. 43-51.
10. Chan, F.T. and Qi, H.J. (2003), “An innovative performance measurement method for supply chain management”, Supply Chain Management: An International Journal, Vol. 8 No. 3, pp. 209-223.
11. Chi, T., Kilduff, P.P.D. and Gargeya, V.B. (2009), “A theoretical review of flexibility, agility and responsiveness in the operations management literature toward a conceptual definition of customer responsiveness”, International Journal of Operations and Production Management, Vol. 29 No. 1, pp. 30-53.
12. Chin, K. and Tummala, V.M. Raoand and Leung, Jendy, P.F. (2004), “A study on supply chain management practices The Hong Kong manufacturing perspective”, International Journal of Physical Distribution and Logistics Management, Vol. 34 No. 6, pp. 505-524.
13. Chong, A.Y.L., Chan, F.T.S., Ooi, K.B. and Sim, J.J. (2011), “Can Malaysian firms improve organizational/innovation performance via SCM?”, Industrial Management and Data Systems, Vol. 111 No. 3, pp. 410-431.
14. Chopra, S. and Meindl, P. (2007), Supply Chain Management: Strategy, Planning, and Operation, Pearsoned Prentice Hall, Upper Saddle River, pp. 3-25.
15. Dale, B.G., Lascelles, D.M. and Lloyd, A. (1994), Supply Chain Management and Development, Prentice-Hall, New York, NY.
16. Dong, L. (2008), “Exploring the impact of top management support of enterprise systems implementations outcomes: two cases”, Business Process Management Journal, Vol. 14 No. 2, pp. 204-218.
17. Donlon, J.P. (1996), “Maximizing value in the supply chain”, Chief Executive, Vol. 117 No. 1, pp. 54-63.
18. ElTayeb, T.K., Zailani, S. and Jayaraman, K. (2010), “The examination on the drivers for green purchasing adoption among EMS 14001 certified companies in Malaysia”, Journal of Manufacturing Technology Management, Vol. 21 No. 2, pp. 206-225.
19. Fawcett, S.E., Wallin, C., Allred, C. and Magnan, G. (2009), “Supply chain information-sharing: benchmarking a proven path”, Benchmarking: An International Journal, Vol. 16 No. 2, pp. 222-246.
20. Forza, C., F. Salvador and A. Trentin (2008), “Form postponement effects on operational performance: a typological theory”, International Journal of Operations and Production Management, Vol. 28 No. 11, pp. 1067-1094.
21. Hanafi, J., Kara, S. and Kaebernick, H. (2008), “Reverse logistics strategies for end-of-life products”, The International Journal of Logistics Management, Vol. 19 No. 3, pp. 367-388.
22. Jabbour, A.B. and Jabbour, C.J.C. (2009), “Are supplier selection criteria going green? Case studies of companies in Brazil”, Industrial Management and Data Systems, Vol. 109 No. 4, pp. 477-495.
23. Jack, E.P., Powers, T.L. and Skinner, L. (2010), “Reverse logistics capabilities: antecedents and cost savings”, International Journal of Physical Distribution and Logistics Management, Vol. 40 No. 3, pp. 228-246.
24. Jonsson, P. and Gustavsson, M. (2008), “The impact of supply chain relationships and automatic data communication and registration on forecast information quality”, International Journal of Physical Distribution and Logistics Management, Vol. 38 No. 4, pp. 280-295.
25. Kamaruddin, N.K. and Udin, Z.M. (2009), “Supply chain technology adoption in Malaysian automotive suppliers”, Journal of Manufacturing Technology Management, Vol. 20 No. 3, pp. 385-403.
26. Kimita, K., Shimomura, Y. and Arai, T. (2009), “A customer value model for sustainable service design”, CIRP Journal of Manufacturing Science and Technology, Vol. 1 No. 4, pp. 254-261.
27. Koh, S.C., Mehmet, D., Erkan, B. and Ekrem, T. (2007), “The impact of supply chain management practices on performance of SMEs”, Industrial Management and Data Systems, Vol. 107 No. 1, pp. 103-124.
28. Koulikoff-Souviron, M. and Harrison, A. (2007), “The pervasive human resource picture in interdependent supply relationships”, International Journal of Operations and Production Management, Vol. 27 No. 1, pp. 8-27.
29. Kreng, V.B. and Wu, C.Y. (2007), “Evaluation of knowledge portal development tools to Taiwan stone Industry using a fuzzy AHP approach”, European Journal of Operational Research, Vol. 176 No. 3, pp. 1795-1810.
30. Kumar, S., Dieveney, E. and Dieveney, A. (2009), “Reverse logistic process control measures for the pharmaceutical industry supply chain”, International Journal of Productivity and Performance Management, Vol. 58 No. 2, pp. 188-204.
31. Lau, H.C.W. and Lee, W.B. (2010), “On a responsive supply chain information system”, international Journal of Physical Distribution and Logistics Management, Vol. 30 No. 7, pp. 598-610.
32. Li, S., S. Rao, S., Ragu-Nathan, T.S. and Ragu-Nathan, B. (2005), “Development and validation of a measurement instrument for studying supply chain management practices”, Journal of Operations Management, Vol. 23 No. 6, pp. 618-641.
33. Maheshwari, B., Kumar, V. and Kumar, U. (2010), “Delineating the ERP institutionalization process: go-live to effectiveness”, Business Process Management Journal, Vol. 16 No. 4, pp. 744-771.
34. Massoud, J.A., Daily, B.F. and Bishop, J.W. (2011), “Perceptions of environmental management systems - An examination of the Mexican manufacturing sector”, Industrial Management and Data Systems, Vol. 111 No. 1, pp. 5-19.
35. Melnyk, S.A., Page, T.J., Wu, S.J. and Burns, L.A. (2012), “Would you mind completing this survey: assessing the state of survey research in supply chain management”, Journal of Purchasing and Supply Management, Vol. 8 No. 1, pp. 35-45.
36. Ngai, E.W.T. and Chan, E.W.C. (2005), “Evaluation of knowledge management tools using AHP”, Expert System with Application, Vol. 9 No. 4, pp. 889-899.
37. Olson, D.L. and Wu, D. (2011), “Risk management models for supply chain: a scenario analysis of outsourcing to China”, Supply Chain Management: An International Journal, Vol. 16 No. 6, pp. 401-408.
38. Ou, C.S., Liu, F.C., Hung, Y.C. and Yen, D.C. (2010), “A structural model of supply chain management on firm performance”, International Journal of Operations and Production Management, Vol. 30 No. 5, pp. 526-545.
39. Park, J., Shin, K., Chang, T. and Park, T. (2010), “An integrative framework for supplier relationship management”, Industrial Management and Data Systems, Vol. 110 No. 4, pp. 495-515.
40. Perego, A., Perotti, S. and Mangiaracina, R. (2011), “ICT for logistics and freight transportation: a literature review and research agenda”, International Journal of Physical Distribution and Logistics Management, Vol. 41 No. 5, pp. 457-483.
41. Rajagopal, P. (2002), “An innovation-diffusion view of implementation of enterprise resource planning (ERP) systems and development of a research model”, Information and Management, Vol. 40 No. 2, pp. 87-114.
42. Saad, M. and Patel, B. (2006), “An investigation of supply chain performance measurement in the Indian automotive sector”, Benchmarking: An International Journal, Vol. 13 Nos 1/2, pp. 36-53.
43. Saaty, T.L. (1980), The Analytic Hierarchy Process, McGraw-Hill, New York, NY.
44. Sahay, B.S. (2003), “The Indian supply chain architecture”, Supply Chain Management: An International Journal, Vol. 8 No. 2, pp. 93-106.
45. Sahay, B.S. and Mohan, R. (2003), “Supply chain management practices in Indian industry”, International Journal of Physical Distribution & Logistics Management, Vol. 33 No. 7, pp. 582-606.
46. Sezen, B. (2008), “Relative effects of design, integration and information sharing on supply chain performance”, Supply Chain Management: An International Journal, Vol. 13 No. 3, pp. 233-240.
47. Shahin, A. and Nikneshan, P. (2008), “Integration of CRM and QFD: A novel model for enhancing customer participation in design and delivery”, The TQM Journal, Vol. 20 No. 1, pp. 68-86.
48. Singh, B., Garg, S.K. and Sharma, S.K. (2009), “Lean can be a survival strategy during recessionary times”, International Journal of Productivity and Performance Management, Vol. 58 No. 8, pp. 803-808.
49. Srivastava, S.K. (2006), “Logistics and supply chain practices in India”, Vision: The Journal of Business Perspective, Vol. 10 No. 3, pp. 69-79.
50. Srivastava, S.K. (2008), “Value recovery network design for product returns”, International Journal of Physical Distribution and Logistics Management, Vol. 38 No. 4, pp. 311-331.
51. Sullivan, W.G. and Canada, J.R. (1989), Multi attribute Evaluation of AMS, Prentice Hall, NJ.
52. Sundram, V.P.K., Ibrahim, A.R. and Govindaraju, V.G.R.C. (2011), “Supply chain management practices in the electronics industry in Malaysia Consequences for supply chain performance” Benchmarking: An International Journal, Vol. 18 No. 6, pp. 834-855.
53. Tai, Y. and Ho, C. (2010), “Effects of information sharing on customer relationship intention” Industrial Management and Data Systems, Vol. 110 No. 9, pp. 1385-1401.
54. Tan, K.C. (2001), “A framework of supply chain management literature”, European Journal of Purchasing and Supply Management, Vol. 7 No. 1, pp. 39-48.
55. Tan, K.C. (2002), “Supply chain management: a strategic perspective”, International Journal of Operation and Production Management, Vol. 22 No. 6, pp. 614-631.
56. Tan, K.C., Kannan, V.R. and Handfield, R.B. (1998), “Supply chain management: supplier performance and firm performance”, International Journal of Purchasing and Materials Management, Vol. 34 No. 3, pp. 2-9.
57. Trentin, A. and Forza, C. (2010), “Design for form postponement: do not overlook organization design”, International Journal of Operations and Production Management, Vol. 30 No. 4, pp. 338-364.
58. Vinodh, S. and Kuttalingam, D. (2011), “Computer-aided design and engineering as enablers of agile manufacturing a case study in an Indian manufacturing organization”, Journal of Manufacturing Technology Management, Vol. 22 No. 3, pp. 405-418.
59. Vinodh, S., Sundararaj, G. and Devadasan, S.R. (2009), “Agility through CAD/CAM integration an examination in an Indian electronics switches manufacturing company”, Journal of Manufacturing Technology Management, Vol. 20 No. 2, pp. 197-217.
60. Wasil, E. and Golden, B. (2003), “Celebrating 25 years of AHP-based decision making”, Computers and Operations Research, Vol. 30 No. 10, pp. 1419-1420.
61. Wu, L. and Park, D. (2009), “Dynamic outsourcing through process modularization”, Business Process Management Journal, Vol. 15 No. 2, pp. 225-244.
62. Yin, R. (1994), Case Study Research, Design and Methods, Sage Publications, Thousand Oaks, CA.
63. Yusuff, R.M., Yee, K.P. and Hashmi, M.S.J. (2001), “A preliminary study on the potential use of the analytical hierarchical process (AHP) to predict advanced manufacturing technology (AMT) implementation”, Robotics and Computer Integrated Manufacturing, Vol. 17 No. 5, pp. 421-427.
64. Zhang, Q. and Vonderembse, M.A. and Mei Cao (2006), “Achieving flexible manufacturing competence -the roles of advanced manufacturing technology and operations improvement practices”, International Journal of Operations and Production Management, Vol. 26 No. 6, pp. 580-599.
65. Neely, H., Richards, J., Mills, K. and Bourne, M. (1997), “Designing performance measures: a structured approach”, International Journal of Operations and Production Management, Vol. 17 No. 11, pp. 1131-1152.