Si microwires based FETs on flexible substrates

2015 11th Conference on Ph.D. Research in Microelectronics and Electronics, PRIME 2015

Volumn , Issue , 2015, Pages 338-341

  Khan, Saleem ^a,b   Yogeswaran, Nivasan ^b,c   Lorenzelli, Leandro ^b   Dahiya, Ravinder ^c  

^a UNIVERSITY OF TRENTO   (Italy)

^b FONDAZIONE BRUNO KESSLER   (Italy)

^c UNIVERSITY OF GLASGOW   (United Kingdom)

Author keywords

Flexible Electronics; Screen Printing; Silicon Microwires; Transfer Printing

Indexed keywords

FIELD EFFECT TRANSISTORS; FLEXIBLE ELECTRONICS; MICROELECTRONICS; PHOTOLITHOGRAPHY; SCREEN PRINTING; SILICON; SILICON WAFERS; SILVER; SINGLE CRYSTALS; SUBSTRATES;

CURRENT-VOLTAGE MEASUREMENTS; FIELD EFFECT TRANSISTOR (FETS); MECHANICAL AND ELECTRICAL; MICRO WIRE; SCREEN PRINTING TECHNOLOGY; SINGLE CRYSTAL SILICON; STANDARD PHOTOLITHOGRAPHY; TRANSFER PRINTING;

SEMICONDUCTING SILICON;

EID: 84946865965     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/PRIME.2015.7251404     Document Type: Conference Paper

References (20)

1. Y. Sun and J. A. Rogers, "Inorganic semiconductors for flexible electronics," Adv. Mater, vol. 19, pp. 1897-1916, 2007.
2. R. S. Dahiya, "Epidermal Electronics: Flexible Electronics for Biomedical Application," in Handbook of Bioelectronics-Directly interfacing electronics and biological systems, S. Carrara and K. Iniewski, Eds., ed: Cambridge University Press, 2015, pp. 245-255.
3. S. Khan, S. Tinku, R. S. Dahiya, and L. Lorenzelli, "Flexible Tactile Sensors using Screen Printed P(VDF-TrFE) and MWCNT/PDMS Composites," IEEE Sensors Journal, vol. PP, pp. 1-1, 2014.
4. R. S. Dahiya, P. Mittendorfer, M. Valle, G. Cheng, and V. Lumelsky, "Directions Towards Effective Utilization of Tactile Skin-A Review," IEEE Sensors Journal, vol. 13, pp. 4121-4138, 2013.
5. R. S. Dahiya and M. Valle, Robotic Tactile Sensing-Technologies and System. Dordrecht: Springer, 2013.
6. P. F. Moonen, I. Yakimets, and J. Huskens, "Fabrication of Transistors on Flexible Substrates: from MassPrinting to HighResolution Alternative Lithography Strategies," Adv. Mater, vol. 24, pp. 5526-5541, 2012.
7. S. Khan, R. Dahiya, and L. Lorenzelli, "Technologies for Printing Sensors and Electronics over Large Flexible Substrates: A Review," IEEE Sensors Journal, vol. PP, pp. 1-1, 2014.
8. R. R. Søndergaard, M. Hösel, and F. C. Krebs, "RolltoRoll fabrication of large area functional organic materials," J. of Polymer Science Part B: Polymer Physics, vol. 51, pp. 16-34, 2013.
9. A. Carlson, A. M. Bowen, Y. Huang, R. G. Nuzzo, and J. A. Rogers, "Transfer printing techniques for materials assembly and micro/nanodevice fabrication," Adv. Mater, vol. 24, pp. 5284-5318, 2012.
10. B. Michel, A. Bernard, A. Bietsch, E. Delamarche, M. Geissler, D. Juncker, et al., "Printing meets lithography: soft approaches to highresolution patterning," IBM J. of Research and Development, vol. 45, pp. 697-719, 2001.
11. D.-H. Kim, N. Lu, Y. Huang, and J. A. Rogers, "Materials for stretchable electronics in bioinspired and biointegrated devices," MRS bulletin, vol. 37, pp. 226-235, 2012.
12. R. S. Dahiya, A. Adami, C. Collini, and L. Lorenzelli, "Fabrication of single crystal silicon mirco-/nanostructures and transferring them to flexible substrates," Microelectron. Eng, vol. 98, pp. 502-507, 2012.
13. T. I. Kim, Y. H. Jung, H. J. Chung, K. J. Yu, N. Ahmed, C. J. Corcoran, et al., "Deterministic assembly of releasable single crystal silicon-metal oxide field-effect devices formed from bulk wafers," Appl. Phys. Lett, vol. 102, p. 182104, 2013.
14. K. J. Lee, H. Ahn, M. J. Motala, R. G. Nuzzo, E. Menard, and J. A. Rogers, "Fabrication of microstructured silicon (s-Si) from a bulk Si wafer and its use in the printing of high-performance thin-film transistors on plastic substrates," J. of Micromech. Microeng, vol. 20, p. 075018, 2010.
15. R. S. Dahiya and S. Gennaro, "Bendable ultra-thin chips on flexible foils," IEEE Sensors J, vol. 13, pp. 4030-4037, 2013.
16. H. Chen, X. Feng, Y. Huang, Y. Huang, and J. A. Rogers, "Experiments and viscoelastic analysis of peel test with patterned strips for applications to transfer printing," Journal of the Mechanics and Physics of Solids, vol. 61, pp. 1737-1752, 2013.
17. K. Zhang, J. H. Seo, W. Zhou, and Z. Ma, "Fast flexible electronics using transferrable silicon nanomembranes," J. of Physics D: Appl. Phys, vol. 45, p. 143001, 2012.
18. M. A. Meitl, Z. T. Zhu, V. Kumar, K. J. Lee, X. Feng, Y. Y. Huang, et al., "Transfer printing by kinetic control of adhesion to an elastomeric stamp," Nat. Mater, vol. 5, pp. 33-38, 2006.
19. A. Nathan, B. k. Park, Q. Ma, A. Sazonov, and J. A. Rowlands, "Amorphous silicon technology for large area digital X-ray and optical imaging," Microelectron. Reliability, vol. 42, pp. 735-746, 2002.
20. S. Khan, R. Dahiya, and L. Lorenzelli, "Flexible thermoelectric generator based on transfer printed Si microwires," in 44th European Solid State Device Research Conference (ESSDERC), 2014, pp. 86-89.