CAD/CAM-fabricated implant-supported restorations: A systematic review

Clinical Oral Implants Research

Volumn 26, Issue , 2015, Pages 77-85

  Patzelt, Sebastian Berthold Maximilian ^a   Spies, Benedikt C ^a   Kohal, Ralf J ^a  

^a UNIVERSITY OF FREIBURG   (Germany)

Author keywords

CAD CAM; Computer aided design; Dental implant; Implant supported dental prosthesis

Indexed keywords

COMPUTER AIDED DESIGN; DENTAL RESTORATION; EVIDENCE BASED DENTISTRY; FIXED PARTIAL DENTURE; HUMAN; PROCEDURES; PROSTHESIS DESIGN; TOOTH CROWN; TOOTH PROSTHESIS;

COMPUTER-AIDED DESIGN; CROWNS; DENTAL PROSTHESIS DESIGN; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTAL RESTORATION FAILURE; DENTURE, PARTIAL, FIXED; EVIDENCE-BASED DENTISTRY; HUMANS;

EID: 84941935470     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/clr.12633     Document Type: Article

References (78)

1. Alfadda, S.A. (2014) Vertical marginal gap evaluation of conventional cast and computer numeric controlled-milled titanium full-arch implant-supported frameworks. International Journal of Prosthodontics 27: 517-522.
2. Bae, K.H., Han, J.S., Seol, Y.J., Butz, F., Caton, J. & Rhyu, I.C. (2008) The biologic stability of alumina-zirconia implant abutments after 1 year of clinical service: a digital subtraction radiographic evaluation. International Journal of Periodontics and Restorative Dentistry 28: 137-143.
3. Balshi, T.J., Wolfinger, G.J., Shuscavage, N.J. & Balshi, S.F. (2012) Zygomatic bone-to-implant contact in 77 patients with partially or completely edentulous maxillas. Journal of Oral and Maxillofacial Surgery 70: 2065-2069.
4. Barbier, L., Abeloos, J., De Clercq, C. & Jacobs, R. (2012) Peri-implant bone changes following tooth extraction, immediate placement and loading of implants in the edentulous maxilla. Clinical Oral Investigation 16: 1061-1070.
5. Barter, S. (2010) Computer-aided implant placement in the reconstruction of a severely resorbed maxilla-a 5-year clinical study. International Journal of Periodontics and Restorative Dentistry 30: 627-637.
6. Becker, W., Becker, B.E., Ricci, A., Bahat, O., Rosenberg, E., Rose, L.F., Handelsman, M. & Israelson, H. (2000) A prospective multicenter clinical trial comparing one- and two-stage titanium screw-shaped fixtures with one-stage plasma-sprayed solid-screw fixtures. Clinical Implant Dentistry and Related Research 2: 159-165.
7. Biscaro, L., Bonfiglioli, R., Soattin, M. & Vigolo, P. (2013) An in vivo evaluation of fit of zirconium-oxide based ceramic single crowns, generated with two cad/cam systems, in comparison to metal ceramic single crowns. Journal of Prosthodontics 22: 36-41.
8. Borges, T., Lima, T., Carvalho, A. & Carvalho, V. (2012) Clinical outcome of inter-proximal papilla between a tooth and a single implant treated with cad/cam abutments: a cross-sectional study. Journal of Oral and Maxillofacial Research 3: e4.
9. Borges, T., Lima, T., Carvalho, A., Dourado, C. & Carvalho, V. (2014) The influence of customized abutments and custom metal abutments on the presence of the interproximal papilla at implants inserted in single-unit gaps: a 1-year prospective clinical study. Clinical Oral Implants Research 25: 1222-1227.
10. Browaeys, H., Dierens, M., Ruyffelaert, C., Matthijs, C., De Bruyn, H. & Vandeweghe, S. (2014) Ongoing crestal bone loss around implants subjected to computer-guided flapless surgery and immediate loading using the all-on-4(r) concept. Clinical Implant Dentisry and Related Research. doi: 10.1111/cid.12197. [Epub ahead of print].
11. Brown, S.D. & Payne, A.G. (2011) Immediately restored single implants in the aesthetic zone of the maxilla using a novel design: 1-year report. Clinical Oral Implants Research 22: 445-454.
12. Cordaro, L., di Torresanto, V.M., Petricevic, N., Jornet, P.R. & Torsello, F. (2013) Single unit attachments improve peri-implant soft tissue conditions in mandibular overdentures supported by four implants. Clinical Oral Implants Research 24: 536-542.
13. De Kok, I.J., Chang, K.H., Lu, T.S. & Cooper, L.F. (2011) Comparison of three-implant-supported fixed dentures and two-implant-retained overdentures in the edentulous mandible: a pilot study of treatment efficacy and patient satisfaction. International Journal of Oral and Maxillofacial Implants 26: 415-426.
14. Di Giacomo, G.A., da Silva, J.V., da Silva, A.M., Paschoal, G.H., Cury, P.R. & Szarf, G. (2012) Accuracy and complications of computer-designed selective laser sintering surgical guides for flapless dental implant placement and immediate definitive prosthesis installation. Journal of Periodontology 83: 410-419.
15. Engquist, B., Astrand, P., Anzen, B., Dahlgren, S., Engquist, E., Feldmann, H., Karlsson, U., Nord, P.G., Sahlholm, S. & Svardstrom, P. (2004) Simplified methods of implant treatment in the edentulous lower jaw. Part ii: early loading. Clinical Implant Dentistry and Related Research 6: 90-100.
16. Ercoli, C., Geminiani, A., Feng, C. & Lee, H. (2012) The influence of verification jig on framework fit for nonsegmented fixed implant-supported complete denture. Clinical Implant Dentistry and Related Research 14 (Suppl. 1): e188-e195.
17. Ericsson, I., Randow, K., Nilner, K. & Peterson, A. (2000) Early functional loading of branemark dental implants: 5-year clinical follow-up study. Clinical Implant Dentistry and Related Research 2: 70-77.
18. Furze, D., Byrne, A., Donos, N. & Mardas, N. (2012) Clinical and esthetic outcomes of single-tooth implants in the anterior maxilla. Quintessence International 43: 127-134.
19. Galindo, D.F. & Butura, C.C. (2012) Immediately loaded mandibular fixed implant prostheses using the all-on-four protocol: a report of 183 consecutively treated patients with 1 year of function in definitive prostheses. International Journal of Oral and Maxillofacial Implants 27: 628-633.
20. Gallucci, G.O., Mavropoulos, A., Bernard, J.P. & Belser, U.C. (2007) Influence of immediate implant loading on peri-implant soft tissue morphology in the edentulous maxilla. International Journal of Oral and Maxillofacial Implants 22: 595-602.
21. Giordano, M., Ausiello, P., Martorelli, M. & Sorrentino, R. (2012) Reliability of computer designed surgical guides in six implant rehabilitations with two years follow-up. Dental Materials 28: e168-e177.
22. Henriksson, K. & Jemt, T. (2003) Evaluation of custom-made procera ceramic abutments for single-implant tooth replacement: a prospective 1-year follow-up study. International Journal of Prosthodontics 16: 626-630.
23. Jemt, T., Back, T. & Petersson, A. (1999) Precision of cnc-milled titanium frameworks for implant treatment in the edentulous jaw. International Journal of Prosthodontics 12: 209-215.
24. Johansson, B., Friberg, B. & Nilson, H. (2009) Digitally planned, immediately loaded dental implants with prefabricated prostheses in the reconstruction of edentulous maxillae: a 1-year prospective, multicenter study. Clinical Implant Dentistry and Related Research 11: 194-200.
25. Kanao, M., Nakamoto, T., Kajiwara, N., Kondo, Y., Masaki, C. & Hosokawa, R. (2013) Comparison of plaque accumulation and soft-tissue blood flow with the use of full-arch implant-supported fixed prostheses with mucosal surfaces of different materials: a randomized clinical study. Clinical Oral Implants Research 24: 1137-1143.
26. Katsoulis, J., Brunner, A. & Mericske-Stern, R. (2011) Maintenance of implant-supported maxillary prostheses: a 2-year controlled clinical trial. International Journal of Oral and Maxillofacial Implants 26: 648-656.
27. Katsoulis, J., Walchli, J., Kobel, S., Gholami, H. & Mericske-Stern, R. (2013) Complications with computer-aided designed/computer-assisted manufactured titanium and soldered gold bars for mandibular implant-overdentures: short-term observations. Clinical Implant Dentistry and Related Research 17 (Suppl 1): e75-e85.
28. Kolgeci, L., Mericske, E., Worni, A., Walker, P., Katsoulis, J. & Mericske-Stern, R. (2014) Technical complications and failures of zirconia-based prostheses supported by implants followed up to 7 years: a case series. International Journal of Prosthodontics 27: 544-552.
29. Komiyama, A., Klinge, B. & Hultin, M. (2008) Treatment outcome of immediately loaded implants installed in edentulous jaws following computer-assisted virtual treatment planning and flapless surgery. Clinical Oral Implants Research 19: 677-685.
30. Lambert, F.E., Weber, H.P., Susarla, S.M., Belser, U.C. & Gallucci, G.O. (2009) Descriptive analysis of implant and prosthodontic survival rates with fixed implant-supported rehabilitations in the edentulous maxilla. Journal of Periodontology 80: 1220-1230.
31. Larsson, C. & Vult von Steyern, P. (2010) Five-year follow-up of implant-supported y-tzp and zta fixed dental prostheses. A randomized, prospective clinical trial comparing two different material systems. International Journal of Prosthodontnics 23: 555-561.
32. Larsson, C. & Vult Von Steyern, P. (2013) Implant-supported full-arch zirconia-based mandibular fixed dental prostheses. Eight-year results from a clinical pilot study. Acta Odontologica Scandinavica 71: 1118-1122.
33. Lin, M.I., Shen, Y.W., Huang, H.L., Hsu, J.T. & Fuh, L.J. (2013) A retrospective study of implant-abutment connections on crestal bone level. Journal of Dental Research 92: 202S-207S.
34. Lopes, A., Malo, P., de Araujo Nobre, M. & Sanchez-Fernandez, E. (2014) The nobelguide(r) all-on-4(r) treatment concept for rehabilitation of edentulous jaws: a prospective report on medium- and long-term outcomes. Clinical Implant Dentistry and Related Research. doi: 10.1111/cid.12260. [Epub ahead of print].
35. Lops, D., Bressan, E., Parpaiola, A., Luca, S., Cecchinato, D. & Romeo, E. (2014) Soft tissues stability of cad-cam and stock abutments in anterior regions: 2-year prospective multicentric cohort study. Clinical Oral Implants Research. doi: 10.1111/clr.12479. [Epub ahead of print].
36. Lutz, F., Krejci, I. & Mörmann, W. (1987) tooth-colored posterior restoration. Phillip Journal für Restaurative Zahnmedizin 4: 127-137.
37. Malo, P., de Araujo Nobre, M., Borges, J. & Almeida, R. (2012) Retrievable metal ceramic implant-supported fixed prostheses with milled titanium frameworks and all-ceramic crowns: retrospective clinical study with up to 10 years of follow-up. Journal Prosthodontics 21: 256-264.
38. Malo, P., de Araujo Nobre, M. & Lopes, A. (2007) The use of computer-guided flapless implant surgery and four implants placed in immediate function to support a fixed denture: preliminary results after a mean follow-up period of thirteen months. Journal of Prosthetic Dentistry 97: S26-S34.
39. Meloni, S.M., De Riu, G., Pisano, M., Cattina, G. & Tullio, A. (2010) Implant treatment software planning and guided flapless surgery with immediate provisional prosthesis delivery in the fully edentulous maxilla. A retrospective analysis of 15 consecutively treated patients. European Journal of Oral Implantology 3: 245-251.
40. Meloni, S.M., De Riu, G., Pisano, M., De Riu, N. & Tullio, A. (2012) Immediate versus delayed loading of single mandibular molars. One-year results from a randomised controlled trial. European Journal of Oral Implantology 5: 345-353.
41. Meloni, S.M., De Riu, G., Pisano, M., Dell'aversana Orabona, G., Piombino, P., Salzano, G., Quarato, D., Riccardi, E., Belli, E. & Ungari, C. (2013a) Computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. Two years results of a prospective case series study. European Review for Medical and Pharmacological Sciences 17: 2968-2973.
42. Meloni, S.M., De Riu, G., Pisano, M. & Tullio, A. (2013b) Full arch restoration with computer-assisted implant surgery and immediate loading in edentulous ridges with dental fresh extraction sockets. One year results of 10 consecutively treated patients: guided implant surgery and extraction sockets. Journal of Maxillofacial and Oral Surgery 12: 321-325.
43. Merli, M., Bernardelli, F. & Esposito, M. (2008) Computer-guided flapless placement of immediately loaded dental implants in the edentulous maxilla: a pilot prospective case series. European Journal of Oral Implantology 1: 61-69.
44. Mörmann, W.H. & Brandestini, M. (1987) [Cerec-system: computerized inlays, onlays and shell veneers]. Zahnarztliche Mitteilungen 77: 2400-2405.
45. Mörmann, W.H., Brandestini, M. & Lutz, F. (1987) [The Cerec system: computer-assisted preparation of direct ceramic inlays in 1 setting]. Quintessenz 38: 457-470.
46. Nocini, P.F., Castellani, R., Zanotti, G., Bertossi, D., Luciano, U. & De Santis, D. (2013) The use of computer-guided flapless dental implant surgery (nobelguide) and immediate function to support a fixed full-archprosthesis infresh-frozen homologous patients with bone grafts. Journal of Craniofacial Surgery 24: e551-e558.
47. Örtorp, A. & Jemt, T. (2000) Clinical experiences of cnc-milled titanium frameworks supported by implants in the edentulous jaw: 1-year prospective study. Clinical Implant Dentistry and Related Research 2: 2-9.
48. Örtorp, A. & Jemt, T. (2002) Clinical experience of cnc-milled titanium frameworks supported by implants in the edentulous jaw: a 3-year interim report. Clinical Implant Dentistry and Related Research 4: 104-109.
49. Örtorp, A. & Jemt, T. (2004) Clinical experiences of computer numeric control-milled titanium frameworks supported by implants in the edentulous jaw: a 5-year prospective study. Clinical Implant Dentistry and Related Research 6: 199-209.
50. Örtorp, A. & Jemt, T. (2012) Cnc-milled titanium frameworks supported by implants in the edentulous jaw: a 10-year comparative clinical study. Clinical Implant Dentistry and Related Research 14: 88-99.
51. Papaspyridakos, P., Chen, C.J., Chuang, S.K., Weber, H.P. & Gallucci, G.O. (2012) A systematic review of biologic and technical complications with fixed implant rehabilitations for edentulous patients. International Journal of Oral and Maxillofacial Implants 27: 102-110.
52. Papaspyridakos, P. & Lal, K. (2010) Immediate loading of the maxilla with prefabricated interim prosthesis using interactive planning software, and cad/cam rehabilitation with definitive zirconia prosthesis: 2-year clinical follow-up. Journal of Esthetic and Restorative Dentistry 22: 223-232.
53. Papaspyridakos, P. & Lal, K. (2013) Computer-assisted design/computer-assisted manufacturing zirconia implant fixed complete prostheses: clinical results and technical complications up to 4 years of function. Clinical Oral Implants Research 24: 659-665.
54. Parpaiola, A., Norton, M.R., Cecchinato, D., Bressan, E. & Toia, M. (2013) Virtual abutment design: a concept for delivery of cad/cam customized abutments- report of a retrospective cohort. International Journal of Periodontics and Restorative Dentistry 33: 51-58.
55. Payer, M., Arnetzl, V., Kirmeier, R., Koller, M., Arnetzl, G. & Jakse, N. (2013) Immediate provisional restoration of single-piece zirconia implants: a prospective case series - results after 24 months of clinical function. Clinical Oral Implants Research 24: 569-575.
56. Pieri, F., Aldini, N.N., Fini, M. & Corinaldesi, G. (2009) Immediate occlusal loading of immediately placed implants supporting fixed restorations in completely edentulous arches: a 1-year prospective pilot study. Journal of Periodontology 80: 411-421.
57. Pjetursson, B.E., Thoma, D., Jung, R., Zwahlen, M. & Zembic, A. (2012) A systematic review of the survival and complication rates of implant-supported fixed dental prostheses (fdps) after a mean observation period of at least 5 years. Clinical Oral Implants Research 23 (Suppl. 6): 22-38.
58. Pozzi, A., Holst, S., Fabbri, G. & Tallarico, M. (2013a) Clinical reliability of cad/cam cross-arch zirconia bridges on immediately loaded implants placed with computer-assisted/template-guided surgery: a retrospective study with a follow-up between 3 and 5 years. Clinical Implant Dentistry and Related Research 17 (Suppl. 1): e86-e96.
59. Pozzi, A., Sannino, G. & Barlattani, A. (2012) Minimally invasive treatment of the atrophic posterior maxilla: a proof-of-concept prospective study with a follow-up of between 36 and 54 months. Journal Prosthetic Dentistry 108: 286-297.
60. Pozzi, A., Tallarico, M. & Barlattani, A. (2013b) Monolithic lithium disilicate full-contour crowns bonded on cad/cam zirconia complete-arch implant bridges with 3 to 5 years of follow-up. Journal Oral Implantology [Epub ahead of print].
61. Pozzi, A., Tallarico, M., Mangani, F. & Barlattani, A. (2013c) Different implant impression techniques for edentulous patients treated with cad/cam complete-arch prostheses: a randomised controlled trial reporting data at 3 year post-loading. European Journal of Oral Implantology 6: 325-340.
62. Pozzi, A., Tallarico, M., Marchetti, M., Scarfo, B. & Esposito, M. (2014) Computer-guided versus free-hand placement of immediately loaded dental implants: 1-year post-loading results of a multicentre randomised controlled trial. European Journal of Oral Implantology 7: 229-242.
63. Romeo, E., Lops, D., Margutti, E., Ghisolfi, M., Chiapasco, M. & Vogel, G. (2003) Implant-supported fixed cantilever prostheses in partially edentulous arches. A seven-year prospective study. Clinical Oral Impants Research 14: 303-311.
64. Rubenstein, J.E. (1995) Stereo laser-welded titanium implant frameworks: clinical and laboratory procedures with a summary of 1-year clinical trials. Journal of Prosthetic Dentistry 74: 284-293.
65. Sanna, A.M., Molly, L. & van Steenberghe, D. (2007) Immediately loaded cad-cam manufactured fixed complete dentures using flapless implant placement procedures: a cohort study of consecutive patients. Journal of Prosthetic Dentistry 97: 331-339.
66. Soardi, C.M., Bramanti, E. & Cicciu, M. (2014) Clinical and radiological 12-year follow-up of full arch maxilla prosthetic restoration supported by dental implants positioned through guide flapless surgery. Minerva Stomatologica 63: 85-94.
67. van Steenberghe, D., Glauser, R., Blomback, U., Andersson, M., Schutyser, F., Pettersson, A. & Wendelhag, I. (2005) A computed tomographic scan-derived customized surgical template and fixed prosthesis for flapless surgery and immediate loading of implants in fully edentulous maxillae: a prospective multicenter study. Clinical Implant Dentistry and Related Research 7(Suppl 1): S111-S120.
68. Tahmaseb, A., De Clerck, R., Aartman, I. & Wismeijer, D. (2012) Digital protocol for reference-based guided surgery and immediate loading: a prospective clinical study. International Journal of Oral and Maxillofacial Implants 27: 1258-1270.
69. Tallarico, M., Vaccarella, A. & Marzi, G.C. (2011) Clinical and radiological outcomes of 1- versus 2-stage implant placement: 1-year results of a randomised clinical trial. European Journal of Oral Implantology 4: 13-20.
70. Tartaglia, G.M., Sidoti, E. & Sforza, C. (2011) A 3-year follow-up study of all-ceramic single and multiple crowns performed in a private practice: a prospective case series. Clinics (Sao Paulo) 66: 2063-2070.
71. Torsello, F., di Torresanto, V.M., Ercoli, C. & Cordaro, L. (2008) Evaluation of the marginal precision of one-piece complete arch titanium frameworks fabricated using five different methods for implant-supported restorations. Clinical Oral Implants Research 19: 772-779.
72. Tripodakis, A.P., Gousias, H.C., Andritsakis, P.D. & Tripodaki, E.A. (2013) Evaluation of alternative approaches in designing cad/cam frameworks for fixed partial dentures. European Journal of Esthetic Dentistry 8: 546-556.
73. Vafiadis, D.C. (2007) Computer-generated abutments using a coded healing abutment: a two year preliminary report. Practical Procedures and Aesthetic Dentistry 19: 443-448.
74. Weinstein, R., Agliardi, E., Fabbro, M.D., Romeo, D. & Francetti, L. (2012) Immediate rehabilitation of the extremely atrophic mandible with fixed full-prosthesis supported by four implants. Clinical Implant Dentistry and Related Research 14: 434-441.
75. Worni, A., Kolgeci, L., Rentsch-Kollar, A., Katsoulis, J. & Mericske-Stern, R. (2014) Zirconia-based screw-retained prostheses supported by implants: a retrospective study on technical complications and failures. Clinical Implant Dentistry and Related Research. doi: 10.1111/cid.12214. [Epub ahead of print].
76. Wu, B., Chao, Y.L. & Sui, L. (2007) [Clinical application of implant-supported restoration with all-ceramic crown fused to small-size titanium abutment]. Zhonghua Kou Qiang Yi Xue Za Zhi 42: 622-623.
77. Wu, M.J., Zou, L.D., Xu, W.H. & Zhang, X.H. (2013) [Evaluation of short-term clinical therapeutic efficiency of computer aided design and manufacturing titanium-ceramic-fixed partial dentures for implant-supported restoration in posterior region]. Beijing Da Xue Xue Bao 45: 803-806.
78. Yong, L.T. & Moy, P.K. (2008) Complications of computer-aided-design/computer-aided-machining-guided (nobelguide) surgical implant placement: an evaluation of early clinical results. Clinical Implant Dentistry and Related Research 10: 123-127.