An overview of feasibilities and challenge of conductive cellulose for rechargeable lithium based battery

Renewable and Sustainable Energy Reviews

Volumn 50, Issue , 2015, Pages 204-213

  Ummartyotin, Sarute ^a   Manuspiya, Hathaikarn ^b  

^a THAMMASAT UNIVERSITY   (Thailand)

^b CENTER OF EXCELLENCE ON PETROCHEMICAL AND MATERIALS TECHNOLOGY   (Thailand)

Author keywords

Cellulose; Conductive cellulose; Rechargeable lithium based battery

Indexed keywords

ASPECT RATIO; LITHIUM; LITHIUM BATTERIES; THERMAL EXPANSION;

ACTIVE CARBON; CLEAN TECHNOLOGIES; COEFFICIENT-OF-THERMAL EXPANSION; CONDUCTIVE CELLULOSE; CONDUCTIVE POLYMER; HIGH ASPECT RATIO; HIGH STIFFNESS; METALLIC PARTICLES; PROPERTY; RECHARGEABLE LITHIUM BASED BATTERY;

CELLULOSE;

EID: 84930009786     PISSN: 13640321     EISSN: 18790690     Source Type: Journal    
DOI: 10.1016/j.rser.2015.05.014     Document Type: Review

References (130)

1. H.P.S. Abdul Khalil, and A.F. Ireana Yusra Green composites from sustainable cellulose nanofibrils: a review Carbohydr Polym 87 2012 963 979
2. O. Faruk Biocomposites reinforced with natural fibers: 2000-2010 Prog Polym Sci 37 2012 1552 1596
3. A. Dufresne, D. Dupeyre, and M.R. Vignon Cellulose microfibrils from potato tuber cells: processing and characterization of starch-cellulose microfibril composites J Appl Polym Sci 76 2000 2080 2092
4. V. Balan, and L. Verestiuc Strategies to improve chitosan hemocompatibility: a review Eur Polym J 53 2014 171 188
5. M. Elsabee, and E. Abdou Chitosan based edible films and coatings: a review Mater Sci Eng, C 33 2013 1819 1841
6. S.K. Shukla Chitosan-based nanomaterials: a state-of-the-art review Int J Biol Macromol 59 2013 46 58
7. J.M. Raquez Polylactide (PLA)-based nanocomposite Prog Polym Sci 38 2013 1504 1542
8. R.M. Rasal, A.V. Janorkar, and D.E. Hirt Poly(lactic acid) modifications Prog Polym Sci 35 2010 338 356
9. G. Dorez Thermal and fire behaviors of natural fibers/PBS biocomposites Polym Degrad Stab 98 2013 87 95
10. T. Patosuo Recent research on natural rubber latex (NRL) allergy Chem Manuf Appl Nat Rubber 2014 452 482
11. S. Fahd Cropping bioenergy and biomaterials in marginal land: the added value of the biorefinery concept Energy 37 2012 79 93
12. A. Sionkowska Current research on the blends of natural and synthetic polymers as new biomaterials: review Prog Polym Sci 36 2011 1254 1276
13. C. Wu Production and characterization of optically transparent nanocomposite film Faculty of forestry 2010 University of Toronto Toronto
14. J. Juntaro Environmentally friendly hierarchical composites Department of chemical engineering and chemical technology 2009
15. Y.C. Hsieh An estimation of the Young's modulus for bacterial cellulose filaments Cellulose 15 2008 572 582
16. S. Ummartyotin Development of transparent bacterial cellulose nanocomposite film as substrate for flexible organic light emitting diode (OLED) display Ind Crops Prod 35 2012 92 97
17. Y. Okahisa Optically transparent wood-cellulose nanocomposite as a base substrate for flexible organic light-emitting diode displays Compos Sci Technol 69 2009 1958 1961
18. S. Ummartyotin, and H. Manuspiya A critical review on cellulose: from fundamental to an approach on sensor technology Renewable Sustainable Energy Rev 41 2015 402 412
19. W. Czaja, D. Romanovicz, and R.M. Brown Jr. Structural investigations of microbial cellulose produced in stationary and agitated culture Cellulose 11 2004 403 411
20. Z. Shi Utilization of bacterial cellulose in food Food Hydrocolloids 35 2014 539 545
21. G. Koronis, A. Silva, and M. Fontul Green composites: a review of adequate materials for automotive applications Composites Part B: Eng 44 2013 120 127
22. A. Svensson Bacterial cellulose as a potential scaffold for tissue engineering of cartilage Biomaterials 26 2005 419 431
23. L. Fu, J. Zhang, and G. Yang Present status and applications of bacterial cellulose-based materials for skin tissue repair Carbohydr Polym 92 2013 1432 1442
24. T. Hanada Plastic substrate with gas barrier layer and transparent conductive oxide thin film for flexible displays Thin Solid Films 518 2010 3089 3092
25. C.Y. Lo Novel roll-to-roll lift-off patterned active-matrix display on flexible polymer substrate Microelectron Eng 86 2009 979 983
26. S. Logothetidis Flexible organic electronic devices: materials, process and applications Mater Sci Eng, B 152 2008 96 104
27. R. Xiong Flexible, highly transparent and iridescent all-cellulose hybrid nanopaper with enhanced mechanical strength and writable surface Carbohydr Polym 113 2014 264 271
28. K. Gao Cellulose nanofibers/reduced graphene oxide flexible transparent conductive paper Carbohydr Polym 97 2013 243 251
29. K. Kang Micromold fabrication for flexible display application Chem Eng J 181 2010 289 292
30. B.S. Pes, J.G. Guimaraes, and J.C. de Costa Nanoelectronic SET-based core for network-on-chip architectures Microelectr J 45 2014 972 975
31. T. Daniels-Race Nanodevices: fabrication, prospects for low dimensional devices and applications Nanolithography 2014 399 423
32. K. Huang, and Q. Zhang Rechargeable lithium battery based on a single hexagonal tungsten trioxide nanowire Nanoenergy 1 2012 172 175
33. K.S. Liao Nano-sponge ionic liquid-polymer composite electrolytes for solid-state lithium power sources J Power Sources 195 2010 867 871
34. Y. Li, J. Song, and J. Yang A review on structure model and energy system design of lithium-ion battery in renewable energy vehicle Renewable Sustainable Energy Rev 37 2014 627 633
35. W. Waag, C. Fleischer, and D.U. Sauer Critical review of the methods for monitoring of lithium-ion batteries in electric and hybrid vehicles J Power Sources 258 2014 321 339
36. L. Lu A review on the key issues for lithium-ion battery management in electric vehicles J Power Sources 226 2013 272 288
37. L. Qiu Novel polymer Li-ion binder carboxymethyl cellulose derivative enhanced electrochemical performance for Li-ion batteries Carbohydr Polym 112 2014 532 538
38. S.Y. Xiao A composite membrane based on a biocompatible cellulose as a host of gel polymer electrolyte for lithium ion batteries J Power Sources 270 2014 53 58
39. J. Liu Polyethylene-supported polyvinylidene fluoride-cellulose acetate butyrate blended polymer electrolyte for lithium ion battery J Power Sources 226 2013 101 106
40. M. Mancini Study of the electrochemical behavior at low temperatures of green anodes for lithium ion batteries prepared with anatase TiO2 and water soluble sodium carboxymethyl cellulose binder Electrochim Acta 85 2012 566 571
41. A. Chiappone Cellulose/acrylate membranes for flexible lithium batteries electrolytes: balancing improved interfacial integrity and ionic conductivity Eur Polym J 57 2014 22 29
42. K. O-Rak Covalently grafted carbon nanotube on bacterial cellulose composite for flexible touch screen application Mater Lett 107 2013 247 250
43. S. Yun, and J. Kim Mechanical, electrical, piezoelectric and electro-active behavior of aligned multi-walled carbon nanotube/ cellulose composites Carbon 49 2011 518 527
44. S. Yun, and J. Kim Multi-walled carbon nanotubes-cellulose paper for chemical vapor sensor Sens Actuators, B: Chem 150 2010 308 313
45. S. Yun, and J. Kim Covalently bonded multi-walled carbon nanotubes-cellulose electro-active paper actuator Sens Actuators, A: Phys 154 2009 73 78
46. K.U. Lee Preparation of the carbon sphere coated with iron oxide and its application for electronic paper Dyes and Pigments 102 2014 22 28
47. H.G. Lim Au pattern fabrication on a cellulose paper using micro-contact printing technique: Solvent swell effect Sens Actuators, A: Phys 153 2009 131 135
48. A. Pud Some aspects of preparation methods and properties of polyaniline blends and composites with organic polymers Prog Polym Sci 28 2003 1701 1753
49. T.H. Qazi, R. Rai, and A.R. Boccaccini Tissue engineering of electrically responsive tissues using polyaniline based polymers: a review Biomaterials 35 2014 9068 9086
50. B. Guo, L. Glavas, and A.C. Albertsson Biodegradable and electrically conducting polymers for biomedical applications Prog Polym Sci 38 2013 1263 1286
51. H. Bagheri, Z. Ayazi, and M. Naderi Conductive polymer-based microextraction methods: a review Anal Chim Acta 767 2013 1 13
52. R. Balint, N.J. Cassidy, and S.H. Cartmell Conductive polymers: towards a smart biomaterial for tissue engineering Acta Biomater 10 2014 2341 2353
53. H. Deng Progress on the morphological control of conductive network in conductive polymer composites and the use as electroactive multifunctional materials Prog Polym Sci 39 2014 627 655
54. L. Wang, and J. Li A piezoresistive flounder element based on conductive polymer composite Sens Actuators, A: Phys 216 2014 214 222
55. P. Gupta A novel graphene and conductive polymer modified pyrolytic graphite sensor for determination of propranolol in biological fluids Sens Actuators, B: Chem 204 2014 791 798
56. Y. Qin Polymer integration for packaging of implantable sensors Sens Actuators, B: Chem 202 2014 758 778
57. S. Wang Organic/inorganic hybrid sensors: a review Sens Actuators, B: Chem 182 2013 467 481
58. C. Legnani Bacterial cellulose membrane as flexible substrate for organic light emitting devices Thin Solid Films 517 2008 1016 1020
59. L. Valentini Cellulose nanocrystals thin films as gate dielectric for flexible organic field-effect transistors Mater Lett 126 2014 55 58
60. X. Huang A novel polymer gel electrolyte based on cyanoethylated cellulose for dye-sensitized solar cells Electrochim Acta 80 2012 219 226
61. H. Cortina Cellulose acetate fibers covered by CdS nanoparticles for hybrid solar cell applications Mater Sci Eng, B 177 2012 1491 1496
62. B.A. Bhanvase, and S.H. Sonawane Ultrasound assisted in situ emulsion polymerization for polymer nanocomposite: a review Chem Eng Process: Process Intensif 85 2014 86 107
63. X. Wu, X. Qian, and X. An Flame retardancy of polyaniline-deposited paper composites prepared via in situ polymerization Carbohydr Polym 92 2013 435 440
64. H. Baniasadi Preparation of conductive polyaniline/graphene nanocomposites via in situ emulsion polymerization and product characterization Synth Met 196 2014 199 205
65. X. Wang Synthesis and electrochemical performance of well-defined flake-shaped sulfonated graphene/polypyrole composites via facile in situ doping polymerization Electrochimica Acta 111 2013 729 737
66. J. Wang Electrochemical in situ polymerization of reduced graphene oxide/polypyrrole composite with high power density J Power Sources 208 2012 138 143
67. D. Muller Chemical in situ polymerization of polypyrrole on bacterial cellulose nanofibers Synth Met 161 2011 106 111
68. N.D. Luong Processable polyaniline suspensions through in situ polymerization onto nanocellulose Eur Polym J 49 2013 335 344
69. J. Choi Electrospun PEDOT:PSS/PVP nanofibers as the chemiresistor in chemical vapor sensing Synth Met 160 2010 1415 1421
70. J. Park, H.K. Kim, and Y. Son Glucose biosensor constructed from capped conducting microtubules of PEDOT Sens Actuators, B: Chem 133 2008 244 250
71. I. Wistrand, R. Lingstrom, and L. Wagberg Preparation of electrically conducting cellulose fibres utilizing polyelectrolyte multilayers of poly(3,4-ethylenedioxythiophene):poly(styrene sulphonate) and poly(allyl amine) Eur Polym J 43 2007 4075 4091
72. C.L. Schauer Color changes in chitosan and poly(allyl amine) films upon metal binding Thin Solid Films 434 2003 250 257
73. Y. Bar-Cohen Electroactive polymers as actuators Adv Piezoelectr Mater 2010 287 317
74. P. Martins, A.C. Lopes, and S. Lanceros-Mendez Electroactive phases of poly(vinylidene fluoride): determination, processing and applications Prog Polym Sci 39 2014 683 706
75. X. Ma, J. Yu, and N. Wang Glycerol plasticized-starch/multiwall carbon nanotube composites for electroactive polymers Compos Sci Technol 68 2008 268 273
76. E. Biddiss, and T. Chau Electroactive polymeric sensors in hand prostheses: bending response of an ionic polymer metal composite Med Eng Phys 28 2006 568 578
77. Z. Chen, and X. Tan Monolithic fabrication of ionic polymer-metal composite actuators capable of complex deformation Sens Actuators, A: Phys 157 2010 246 257
78. U. Helmersson Ionized physical vapor deposition (IPVD): a review of technology and applications Thin Solid Films 513 2006 1 24
79. N. Selvakumar, and H.C. Barshilia Review of physical vapor deposited (PVD) spectrally selective coatings for mid and high temperature solar thermal applications Sol Energy Mater Solar Cells 98 2012 1 23
80. O. Frank, and M. Kalbac Chemical vapor deposition (CVD) growth of graphene films Graphene 2014 27 49
81. G. Puma Preparation of titanium dioxide photocatalyst loaded onto activated carbon support using chemical vapor deposition: a review paper J Hazard Mater 157 2008 209 219
82. C.M. Seah, S.P. Chai, and A.R. Mohamed Mechanisms of graphene growth by chemical vapour depsotion on transition metals Carbon 70 2014 1 21
83. V.N. Tsvetkov Molecular structure and physical properties of rigid chain polymers in solutions. Review Polym Sci USSR 25 1983 1815 1835
84. A.A. Smith, and P.D. Gujrati Solubility in compressible polymers: beyond the regular solution theory Eur Polym J 43 2007 425 459
85. R.J. Sengwa, P. Dhatarwal, and S. Choudhary Role of preparation methods on the structural and dielectric properties of plasticized polymer blend electrolytes: correlation between ionic conductivity and dielectric parameters Electrochim Acta 142 2014 359 370
86. E.P. Grishina, L.M. Ramenskaya, and A.N. Mudrov Conductivity and dielectric properties of heterogeneous films based on homo- and copolymers of methyl(methacrylate) and vinyl pyrrolidone doped with ionic liquid Eur Polym J 59 2014 247 253
87. S. Reif-Acherman Early and current experimental methods for determining thermal conductivites of metals Int J Heat Mass Transfer 77 2014 542 563
88. M. Matsushita, M. Monde, and Y. Mitsutake Predictive calculation of the effective thermal conductivity in a metal hydride packed bed Int J Hydrogen Energy 39 2014 9718 9725
89. F. Smeacetto Glass and composite seals for the joining of YSZ to metallic interconnect in solid oxide fuel cells J Eur Ceram Soc 28 2008 611 616
90. C.L. Chu Oxidation behavior of metallic interconnect coated with La-Sr-Mn film by screen painting and plasma sputtering Int J Hydrogen Energy 34 2009 422 434
91. H.F. Zuo Application of microcrystalline cellulose to fabricate ZnO with enhanced photocatalytic activity J Alloys Compd 617 2014 823 827
92. L. Yao, and J. He Recent progress in antireflection and self-cleaning technology - from surface engineering to functional surfaces Prog Mater Sci 61 2014 94 143
93. 2 photocatalysis in cementitious systems: insights into self-cleaning and depollution chemistry Cem Concr Res 42 2012 539 548
94. D.W. Lee, and B.R. Yoo Advanced metal oxide (supported) catalysts: synthesis and applications J Ind Eng Chem 20 2014 3947 3959
95. M. Moritz, and M. Geszke-Moritz The newest achievements in synthesis, immobilization and practical applications of antibacterial nanoparticles Chem Eng J 228 2013 596 613
96. T. Jan Synthesis, physical properties and antibacterial activity of metal oxides nanostructures Mater Sci Semicond Process 21 2014 154 160
97. J.C.D. Rosado, D. L'hermite, and Y. Levi Effect of particle size on laser-induced breakdown spectroscopy analysis of alumina suspension in liquids Spectrochim Acta Part B: Atom Spectrosc 74-75 2012 80 86
98. S.T. Jarvinen Detection of Ni, Pb and Zn in water using electrodynamic single-particle levitation and laser-induced breakdown spectroscopy Spectrochim Acta Part B: Atom Spectrosc 99 2014 9 14
99. D. Baah Stop flow lithography synthesis of non-spherical metal oxide particles Particuology 14 2014 91 97
100. M. Kim Hydrothermal synthesis of metal nanoparticles using glycerol as a reducing agent J Supercrit Fluids 90 2014 53 59
101. Z.S. Wu Graphene/metal oxide composite electrode materials for energy storage Nano Energy 1 2012 107 131
102. T. Stubhan High fill factor polymer solar cells comprising a transparent, low temperature solution processed doped metal oxide/metal nanowire composite electrode Sol Energy Mater Sol Cells 107 2012 248 251
103. T.A. Saleh, and V.K. Gupta Processing methods, characteristics and adsorption behavior of tire derived carbons: a review Adv Colloid Interface Sci 211 2014 93 101
104. Sing, KSW. Adsorption by active carbons. Adsorption by powders and porous solids (Second edition); 2014. p.321-91.
105. E.L.K. Mui, D.C.K. Ko, and G. McKay production of active carbons from waste tyres a review Carbon 42 2004 2789 2805
106. R.H. Hesas The effects of a microwave heating method on the production of activated carbon from agricultural waste: a review J Anal Appl Pyrolysis 100 2013 1 11
107. B. Dong, C. Liu, and Y.P. Wu Fracture and fatigue of silica/carbon black/natural rubber composites Polym Test 38 2014 40 45
108. N. Rattanasom, and S. Prasertsri Mechanical properties, gas permeability and cut growth behaviour of natural rubber vulcanizates: influence of clay types and clay/carbon black ratios Polym Test 31 2012 645 653
109. J.P. Kerry, M.N. O'Grady, and S.A. Hogan Past, current and potential utilisation of active and intelligent packaging systems for meat and muscle-based products: a review Meat Sci 74 2006 113 130
110. J. Zhao Electrochemical sensor for hazardous food colourant quinoline yellow based on carbon nanotube-modified electrode Food Chem 128 2011 569 572
111. C. Chen Advanced ozone treatment of heavy oil refining wastewater by activated carbon supported iron oxide J Ind Eng Chem 20 2014 2782 2791
112. M. Tammaro A comparative evaluation of biological activated carbon and activated sludge processes for the treatment of tannery wastewater J Environ Chem Eng 2 2014 1445 1455
113. A. Qureshi Review on carbon-derived, solid-state, micro and nano sensors for electrochemical sensing applications Diamond Relat Mater 18 2009 1401 1420
114. M. Sharma Carbon fiber surfaces and composite interphases Compos Sci Technol 102 2014 35 50
115. V. Jourdain, and C. Bichara Current understanding of the growth of carbon nanotubes in catalytic chemical vapour deposition Carbon 58 2013 2 39
116. A. Saha, C. Jiang, and A.A. Marti Carbon nanotube networks on different platforms Carbon 79 2014 1 18
117. E. Cuce Toward aerogel based thermal superinsulation in buildings: a comprehensive review Renewable Sustainable Energy Rev 34 2014 273 299
118. R. Baetens, B.P. Jelle, and A. Gustavsen Aerogel insulation for building applications: a state of the art review Energy Build 43 2011 761 769
119. T. Oshima Cellulose aerogel regenerated from ionic liquid solution for immobilized metal affinity adsorption Carbohydr Polym 103 2014 62 69
120. X. Zhang Solid-state flexible polyaniline/silver cellulose nanofibrils aerogel supercapacitors J Power Sources 246 2014 283 289
121. M.P. Stevens Polymer chemistry: an introduction 1999 Oxford University Press
122. Y.J. Lee, and H. Hatori Effects of heat treatment and B doping in cellulose-derived carbon Chem Phys Lett 362 2002 326 330
123. T. Okubo Effects of Li pre-doping on change/discharge properties of Si thin flakes as a negative electrode for Li-ion batteries Solid State Ionics 262 2014 39 42
124. J.A. Lie, and M.B. Hagg Carbon membranes from cellulose: synthesis, performamce and regeneration J Membr Sci 284 2006 79 86
125. P. Tatsidjodoung, N. Le Pierres, and L. Luo A review of potential materials for thermal energy storage in building applications Renewable Sustainable Energy Rev 18 2013 327 349
126. J. Huang, and Y. Gu Self-assembly of various guest substrates in natural cellulose substances to functional nanostructured materials Curr Opt Colloid Interface Sci 16 2011 470 481
127. G.C. Zguris A review of physical properties of separators for valve-regulated lead/acid batteries J Power Sources 59 1996 131 135
128. N. Achaibou, M. Haddadi, and A. Malek Lead acid batteries simulation including experimental validation J Power Sources 185 2008 1484 1491
129. S.S. Jeong Natural cellulose as binder for lithium battery electrodes J Power Sources 199 2012 331 335
130. M.U.M. Patel Low surface area graphene/cellulose composite as a host matrix for lithium sulphur batteries J Power Sources 254 2014 55 61