Progress of Nanofluid Application in Machining: A Review

Materials and Manufacturing Processes

Volumn 30, Issue 7, 2015, Pages 813-828

  Sharma, Anuj Kumar ^a   Tiwari, Arun Kumar ^b   Dixit, Amit Rai ^a  

^a INDIAN SCHOOL OF MINES   (India)

^b GLA UNIVERSITY   (India)

Author keywords

Drilling; G ratio; Grinding; Milling; MQL; Nanofluids; Roughness; Turning

Indexed keywords

AIR; AIR LUBRICATION; ATMOSPHERIC PRESSURE; CUTTING FLUIDS; CUTTING TOOLS; DRILLING; FRICTION; GRINDING (MACHINING); HEAT TRANSFER; LUBRICATION; MACHINING; MACHINING CENTERS; MILLING (MACHINING); NANOPARTICLES; SPRAY NOZZLES; SURFACE ROUGHNESS; TURNING;

FRICTION COEFFICIENTS; G RATIO; MACHINING PERFORMANCE; MINIMUM QUANTITY LUBRICATION; MQL; NANOFLUIDS; NANOPARTICLE CONCENTRATIONS; TRIBOLOGICAL PROPERTIES;

NANOFLUIDICS;

EID: 84929840436     PISSN: 10426914     EISSN: 15322475     Source Type: Journal    
DOI: 10.1080/10426914.2014.973583     Document Type: Review

References (95)

1. Dhar, N.R.; Islam, M.W.; Islam, S.; Mithu, M.A.H. The influence of minimum quantity lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel. Journal of Materials Processing Technology 2006, 171, 93-99.
2. Weinert, K.; Inasaki, I.; Sutherland, J.W.; Wakabayashi, T. Dry machining and minimum quantity lubrication. CIRP Annals Manufacturing Technology 2005, 53 (2), 511-537.
3. Sreejith, P.S.; Ngoi, B.K.A. Dry machining: Machining of the future. Journal of Materials Processing Technology 2000, 101, 287-291.
4. Granger, C. Dry machining's double benefit. Machinery and Production Engineering 1994, 152 (3873), 14-20.
5. Diniz, A.E.; Micaroni, R. Cutting conditions for finish turning process aiming the use of dry cutting. International Journal of Machine Tools and Manufacture 2002, 42, 899-904.
6. Diniz, A.E.; Oliveira, A.J. Optimizing the use of dry cutting in rough turning steel operations. International Journal of Machine Tools and Manufacture 2004, 44, 1061-1067.
7. Braga, D.U.; Diniz, A.E.; Miranda, G.W.A.; Coppini, N.L. Using a minimum quantity of lubricant (MQL) and a diamond coated tool in the drilling of aluminum-silicon alloys. Journal of Materials Processing Technology 2002, 122, 127-138.
8. Li, K.M.; Liang, S.Y. Performance profiling of minimum quantity lubrication in machining. The International Journal of Advanced Manufacturing Technology 2007, 35, 226-233.
9. Kishawy, H.A.; Dumitrescu, M.; Ng, E.G.; Elbestawi, M.A. Effect of coolant strategy on tool performance, chip morphology and surface quality during high speed machining of A356 aluminum alloy. International Journal of Machine Tools and Manufacture 2005, 45, 219-227.
10. Heinemann, R.; Hinduja, S.; Barrow, G.; Petuelli, G. Effect of MQL on the tool life of small twist drills in deep-hole drilling. International Journal of Machine Tools and Manufacture 2006, 46, 1-6.
11. Li, K.M.; Lin, C.P. Study on minimum quantity lubrication in micro-grinding. International Journal of Advance Manufacturing Technology 2012, 62, 99-105.
12. Hadad, M.; Sadeghi, B. Minimum quantity lubrication-MQL turning of AISI4140 steel alloy. Journal of Cleaner Production 2013, 54, 332-343.
13. Li, K.M.; Chou, S.Y. Experimental evaluation of minimum quantity lubrication in near micro-milling. Journal of Materials Processing Technology 2010, 210, 2163-2170.
14. Davim, J.P.; Sreejith, P.S.; Silva, J. Turning of brasses using minimum quantity of lubricant (MQL) and flooded lubricant conditions. Materials and Manufacturing Processes 2007, 22, 45-50.
15. Daungthongsuk, W.; Wongwises, S. A critical review of convective heat transfer of nanofluids. Renewable and Sustainable Energy Reviews 2005, 9, 1.
16. Saidur, R.; Leong, K.Y.; Mohammad, H.A. A review on applications and challenges of nanofluids. Renewable and Sustainable Energy Reviews 2011, 15, 1646-1668.
17. Kakaç, S.; Pramuanjaroenkij, A. Review of convective heat transfer enhancement with nanofluids. International Journal of Heat and Mass Transfer 2009, 52, 3187-3196.
18. Wen, D.; Lin, G.; Vafaei, S.; Zhang, K. Review of nanofluids for heat transfer applications. Particuology 2009, 7, 141-150.
19. Chen, H.; Ding, Y. Heat transfer and rheological behaviour of nanofluids-A review Advances in Transport Phenomena 2009, 1, 135-177.
20. Srikant, R.R.; Rao, D.N.; Subrahmanyam, M.S.; Vamsi, K.P. Applicability of cutting fluids with nanoparticle inclusion as coolants in machining. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2009, 223, 221-225.
21. Eastman, J.A.; Choi, S.U.S.; Li, S.; Yu, W.; Thompson, L.J. Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles. Applied Physics Letters 2001, 78 (6), 718-720.
22. Liu, M.S.; Lin, M.C.C.; Tsai, C.Y.; Wang, C.C. Enhancement of thermal conductivity with Cu for nanofluids using chemical reduction method. International Journal of Heat and Mass Transfer 2006, 49 (17-18), 3028-3033.
23. Yoo, D.H.; Hong, K.S.; Yang, H.S. Study of thermal conductivity of nanofluids for the application of heat transfer fluids. Thermochimica Acta 2007, 455 (1-2), 66-69.
24. 3 thermal conductivity. Applied Physics Letters 2005, 87, 152107, 1-3.
25. Choi, S.U.S.; Eastman, J.A. Enhancing thermal conductivity of fluids with nanoparticles. In ASME International Mechanical Engineering Congress & Exposition, San Francisco, CA, November 12-17, 1995.
26. Vajjha, R.S.; Das, D.K. A review and analysis on influence of temperature and concentration of nanofluids on thermophysical properties, heat transfer and pumping power. International Journal of Heat and Mass Transfer 2012, 55, 4063-4078.
27. Qiang, L.; Yimin, X. Convective heat transfer and flow characteristics of Cu-water nanofluid. Science in China (Series E) 2002, 45 (4), 408-416.
28. 2nanoparticles (nanofluids) flowing upward through a vertical pipe. International Journal of Heat and Mass Transfer 2007, 50, 2272-2281.
29. Choi, S.U.S.; Zhang, Z.G.; Yu, W.; Lockwood, F.E.; Grulke, E.A. Anomalous thermal conductivity enhancement in nanotube suspensions. Applied Physics Letters 2001, 79 (14), 2252-2254.
30. Yang, Y. Carbon nanofluids for lubricant application. PhD thesis, University of Kentucky, 2006.
31. Murshed, S.M.S.; Leong, K.C.; Yang, C. Investigation of thermal conductivity and viscosity of nano fluids. International Journal of Thermal Sciences 2008, 47, 560-568.
32. Chen, H.; Yang, W.; He, Y.; Ding, Y.; Zhang, L.; Tan, C.; Lapkin, A.A.; Bavykin, D.V. Heat transfer and flow behaviour of aqueous suspensions of titanate nanotubes (nanofluids). Powder Technology 2008, 183, 63-72.
33. 2 nanofluids. International Journal of Thermophysics 2009, 30, 1213-1226.
34. Yu, W.; Xie, H.; Chen, L.; Li, Y. Investigation of thermal conductivity and viscosity of ethylene glycol based ZnO nanofluid. Thermochimica Acta 2009, 49, 92-96.
35. 3 nanofluids. Nanoscale Research Letters 2011, 6, 221.
36. Saedinia, M.; Behabadi, M.A.A.; Razi, P. Thermal and rheological characteristics of CuO-base oil nanofluid flow inside a circular tube. International Communications in Heat and Mass Transfer 2012, 39, 152-159.
37. Dekhordi, B.L.; Kazi, S.N.; Hamdi, M.; Ghadimi, A.; Sadeghinezhad, E.; Metselaar, H.S.C. Investigation of viscosity and thermal conductivity of alumina nanofluids with addition of SDBS. Heat and Mass Transfer 2013, 49, 1109-1115.
38. William, J.K.M.; Ponmani, S.; Samuel, R.; Nagarajan, R.; Sangwai, J.S. Effect of CuO and ZnO nanofluids in xanthan gum on thermal, electrical and high pressure rheology of water-based drilling fluids. Journal of Petroleum Science and Engineering 2014, 117, 15-27.
39. Yang, Y.; Grulke, E.A.; Zhang, Z.G.; Wu, G. Thermal and rheological properties of carbon nanotube-in-oil dispersions. Journal of Applied Physics 2006, 99, 114307.
40. Phuoc, T.X.; Massoudi, M.; Chen, R.H. Viscosity and thermal conductivity of nanofluids containing multi-walled carbon nanotubes stabilized by chitosan. International Journal of Thermal Sciences 2011, 50, 12-18.
41. Ruan, B.; Jacobi, A.M. Ultrasonication effects on thermal and rheological properties of carbon nanotube suspensions. Nanoscale Research Letters 2012, 7, 127.
42. Meng, Z.; Han, D.; Wu, D.; Zhu, H.; Li, Q. Thermal conductivities, rheological behaviours and photo thermal properties of ethylene glycol-based nanofluids containing carbon black nanoparticles. Procedia Engineering 2012, 36, 521-527.
43. Meng, Z.; Wu, D.; Wang, L.; Zhu, H.; Li, Q. Carbon nanotube glycol nanofluids: Photo-thermal properties, thermal conductivities and rheological behavior. Particuology 2012, 10, 614-618.
44. Wang, B.; Wang, X.; Lou, W.; Hao, J. Thermal conductivity and rheological properties of graphite/oil nanofluids. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2012, 414, 125-131.
45. Ettefaghi, E.; Rashidi, A.; Ahmadi, H.; Mohtasebi, S.S.; Pourkhalil, M. Thermal and rheological properties of oil-based nanofluids from different carbon nanostructures. International Communications in Heat and Mass Transfer 2013, 48, 178-182.
46. Mehrali, M.; Sadeghinezhad, E.; Latibari, S.T.; Kazi, S.N.; Mehrali, M.; Zubir, M.N.B.; Metselaar, H.S.C. Investigation of thermal conductivity and rheological properties of nanofluids containing grapheme nanoplatelets. Nanoscale Research Letters 2014, 9, 15.
47. 3 aqueous nanofluids. Science China Technological Sciences 2010, 53 (2), 360-368.
48. Tavman, I.; Turgut, A.; Chirtoc, M.; Schuchmann, H.P.; Tavman, S. Experimental investigation of viscosity and thermal conductivity of suspensions containing nanosized ceramic particles. Archives of Materials Science and Engineering 2008, 34 (34-2), 99-104.
49. Lee, C.G.; Hwang, Y.J. Choi, Y.M.; Lee, J.K.; Choi, C.; Oh, J.M. A Study on the Tribological characteristics of graphite nano lubricants. International Journal of Precision Engineering and Manufacturing 2009, 10 (1), 85-90.
50. Reddy, N.S.K.; Rao, P.V. Experimental investigation to study the effect of solid lubricants on cutting forces and surface quality in end milling. International Journal of Machine Tools and Manufacture 2006, 46, 189-198.
51. Park, K.H.; Ewald, B.; Kwon, P.Y. Effect of nano-enhanced lubricant in minimum quantity lubrication balling milling. Journal of Tribology 2011, 133/031803, 1-8.
52. Kwon, P.; Drazl, L. Nanoparticle graphite based minimum quantity lubrication method and composition; Michigan State University, 2008, Report No. 41-899 000059910-0429, TEC2008-0079-01Prov Serial No 12/655, 649.
53. 2 nano lubrication system. International Journal of Advanced Manufacturing Technology 2012, 63, 505-512.
54. Sayuti, M.; Sarhan, A.A.D.; Tanaka, T.; Hamdi, M.; Saito, Y. Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system. International Journal of Advanced Manufacturing Technology 2013, 65, 1493-1500.
55. 2) nanolubrication in end milling machining. Journal of Cleaner Production 2013, 66, 685-691.
56. 2nanolubrication system. Journal of Cleaner Production 2013, 66, 655-663.
57. 2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy. International Journal of Advanced Manufacturing Technology 2013, 67, 833-849.
58. 2) nanolubrication parameters in CNC milling of AL6061-T6 alloy. International Journal of Advanced Manufacturing Technology 2014, 70 (5-8), 1143-1155.
59. 2 nanoparticles based grinding fluids in minimum quantity lubrication grinding. Transactions of North American Manufacturing Research Institute of SME 2008, 36, 357-364.
60. Shen, B.; Shih, A.J.; Tung, S.C. Application of nanofluids in minimum quantity lubrication grinding. Tribology Transactions 2008, 51, 730-737.
61. Alberts, M.; Kalaitzidou, K.; Melkote, S. An investigation of graphite nanoplatelets as lubricant in grinding. International Journal of Machine Tools and Manufacture 2009, 49, 966-970.
62. th Annual Conference of the American Society for Composites, Purdue University, 2003.
63. Lee, P.H.; Nam, T.S.; Li, C.; Lee, S.W. Environmentally-friendly nano-fluid minimum quantity lubrication (MQL) meso-scale grinding process using nano-diamond particles. In International Conference on Manufacturing Automation, Hong Kong, December 13-15, 2010, 44-49.
64. Prabhu, S.; Vinayagam, B.K. Nano surface generation of grinding process using carbon nano tubes. Sadhana 2010, 35 (6), 747-760.
65. Lee, P.H.; Nam, J.S.; Li, C.; Lee, S.W. An experimental study on micro-grinding process with nanofluid minimum quantity lubrication (MQL). International Journal of Precision Engineering and Manufacturing 2012, 13 (3), 331-338.
66. Setti, D.; Ghosh, S.; Rao, P.V. Application of nano cutting fluid under minimum quantity lubrication (MQL) technique to improve grinding of Ti - 6Al -4 V alloy. World Academy of Science Engineering and Technology 2012, 70, 512-516.
67. Kalita, P.; Malshe, A.P.; Kumar, S.A.; Yoganath, V.G.; Gurumurthy, T. Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants. Journal of Manufacturing Processes 2012, 14, 160-166.
68. Kalita, P.; Malshe, A.P.; Rajurkar, K.P. Study of tribo-chemical lubricant film formation during application of nanolubricants in minimum quantity lubrication (MQL) grinding. CIRP Annals: Manufacturing Technology 2012, 61, 327-330.
69. Prabhu, S.; Vinayagam, B.K. AFM investigation in grinding process with nanofluids using Taguchi analysis. International Journal of Advanced Manufacturing Technology 2012, 60, 149-160.
70. Mao, C.; Tang, X.; Zou, H.; Huang, X.; Zhou, Z. Investigation of grinding characteristic using nanofluid minimum quantity lubrication. International Journal of Precision Engineering and Manufacturing 2012, 13 (10), 1745-1752.
71. Mao, C.; Zou, H.; Huang, X.; Zhang, J.; Zhou, Z. The influence of spraying parameters on grinding performance for nanofluid minimum quantity lubrication. International Journal of Advanced Manufacturing Technology 2013, 64, 1791-1799.
72. Mao, C.; Zhang, J.; Huang, Y.; Zou, H.; Huang, X.; Zhou, Z. Investigation on the effect of nanofluid parameters on MQL grinding. Materials and Manufacturing Processes 2013, 28 (4), 436-442.
73. Liao, Y.S.; Yu, Y.P.; Chang, C.H. Effect of cutting fluid with nano particles on the grinding of titanium alloys. Advanced Materials Research 2010, 126-128, 353-358.
74. Nam, J.S.; Lee, P.H.; Lee, S.W. Experimental characterization of micro-drilling process using nanofluid minimum quantity lubrication. International Journal of Machine Tools and Manufacture 2011, 51, 649-652.
75. Krishna, P.V.; Srikant, R.R.; Rao, D.N. Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel. International Journal of Machine Tools and Manufacture 2010, 50, 911-916.
76. Rao, S.N.; Satyanarayana, B. Experimental estimation of tool wear and cutting temperatures in MQL using cutting fluids with CNT inclusion. International Journal of Engineering Science and Technology 2011, 3 (4), 928-931.
77. Yan, J.; Zhang, Z.; Kuriyagawa, T. Effect of nanoparticle lubrication in diamond turning of reaction-bonded SiC. International Journal of Automation Technology 2011, 5 (3), 307-312.
78. Khandekar, S.; Sankar, M.R.; Agnihotri, V.; Ramkumar, J. Nano-cutting fluid for enhancement of metal cutting performance. Materials and Manufacturing Processes 2012, 27 (9), 963-967.
79. Prasad, M.M.S.; Srikant, R.R. Performance evaluation of nano graphite inclusion in cutting fluids with MQL technique in turning of AISI 1040 steel. International Journal of Research in Engineering and Technology 2013, 2 (11), 381-393.
80. 2nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumption. Journal of Cleaner Production 2014, 67, 265-276.
81. Roy, S.; Ghosh, A. High speed turning of AISI 4140 steel using nanofluid through twin jet SQL system; In ASME International Manufacturing Science and Engineering Conference, Madison, WI, USA, June 10-14, 2013.
82. You, J.; Gao, Y. A study of carbon nanotubes as cutting grains for nano machining. Advanced Materials Research 2009, 76-78, 502-507.
83. Hu, Z.S.; Lai, R.; Lou, F.; Wang, L.G.; Chen, Z.L.; Chen, G.X.; Dong, J.X. Preparation and tribological properties of nanometer magnesium borate as lubricating oil additive. Wear 2002, 252, 370-374.
84. 2 microspheres in base oil 500SN. Lubrication Science 2007, 19, 71-79.
85. Ginzburg, B.M.; Shibaev, L.A.; Kireenko, O.F.; Shepelevskii, A.A.; Baidakova, M.V.; Sitnikova, A.A. Antiwear effect of fullerene C60 additives to lubricating oils. Russian Journal of Applied Chemistry 2002, 75 (8), 1330-1335.
86. Zhou, J.; Yang, J.; Zhang, Z.; Liu, W.; Xue, Q. Study on the structure and tribological properties of surface-modified Cu nanoparticles. Materials Research Bulletin 1999, 34 (9), 1361-1367.
87. Rastogi, R.B.; Yadav, M.; Bhattacharya, A. Application of molybdenum complexes of 1-aryl-2,5-dithiohydrazodicarbonamides as extreme pressure lubricant additives. Wear 2002, 252, 686-692.
88. Rapoport, L.; Leshchinsky, V.; Lvovsky, M.; Nepomnyashchy, O.; Volovik, Y.; Tenne, R. Mechanism of friction of fullerenes. Industrial Lubrication & Tribology 2002, 54, 171-176.
89. Wu, Y.Y.; Tsui, W.C.; Liu, T.C. Experimental analysis of tribological properties of lubricating oils with nanoparticle additives. Wear 2007, 262, 819-825.
90. Chiñas-Castillo, F.; Spikes, H.A. Mechanism of action of colloidal solid dispersions. Journal of Tribology 2003, 125, 552-557.
91. Liu, G.; Li, X.; Qin, B.; Xing, D.; Guo, Y.; Fan, R. Investigation of the mending effect and mechanism of copper nano-particles on a tribologically stressed surface. Tribology Letters 2004, 17, 4.
92. Tao, X.; Jiazheng, Z.; Kang, X. The ball-bearing effect of diamond nanoparticles as an oil additive. Journal of Physics D: Applied Physics. 1996, 29, 2932-2937.
93. Lee, K.; Hwang, Y.; Cheong, S.; hoi, Y.; Kwon, L.; Lee, J.; Kim, S.H. Understanding the role of nanoparticles in Nanooil lubrication. Tribology Letters 2009, 35, 127-131.
94. Chan, C.Y.; Lee, W.B.; Wang, H. Enhancement of surface finish using water miscible nano-cutting fluid in ultra precision turning. International Journal of Machine Tools and Manufacture 2013, 73, 62-70.
95. Ma, K.Q.; Liu, J. Nano liquid metal fluid as ultimate coolant. Physics Letters A 2007, 361, 252-256.