Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy

International Journal of Advanced Manufacturing Technology

Volumn 70, Issue 5-8, 2014, Pages 1143-1155

  Rahmati, Bizhan ^a,b   Sarhan, Ahmed A D ^a,c   Sayuti, M ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

^b UNIVERSITY OF TEHRAN   (Iran)

^c Assiut University   (Egypt)

Author keywords

Al6061 T6 alloy; Cutting force; End milling; MoS2 nanolubrication; Surface roughness

Indexed keywords

AL6061-T6 ALLOYS; CUTTING FORCES; DIVERSE APPLICATIONS; END MILLING; MOLYBDENUM DISULFIDE; NANO LUBRICATIONS; TAGUCHI OPTIMIZATIONS; TRIBOLOGICAL CHARACTERISTICS;

AEROSPACE INDUSTRY; ALLOYS; CARRIER CONCENTRATION; MECHANICAL PROPERTIES; MILLING (MACHINING); MOLYBDENUM COMPOUNDS; SURFACE ROUGHNESS; TAGUCHI METHODS;

CUTTING;

EID: 84896694889     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-013-5334-x     Document Type: Article

References (40)

1. Lakshminarayanan A, Balasubramanian V, Elangovan K (2009) Effect of welding processes on tensile properties of AA6061 aluminium alloy joints. Int J Adv Manuf Technol 40:286-296
2. Shankar MR, Chandrasekar S, Compton WD, King AH (2005) Characteristics of aluminum 6061-T6 deformed to large plastic strains by machining. Mater Sci Eng A 410-411:364-368
3. Li Y, Liang SY (1999) Cutting force analysis in transient state milling processes. Int J Adv Manuf Technol 15:785-790
4. Hsu SM (2004) Nano-lubrication: concept and design. Tribol Int 37:537-545
5. Lee J, Cho S, Hwang Y, Cho HJ, Lee C, Choi Y, Ku BC, Lee H, Lee B, Kim D, Kim SH (2009) Application of fullerene-added nano-oil for lubrication enhancement in friction surfaces. Tribol Int 42:440-447
6. Tao X, Jiazheng Z, Kang X (1996) The ball-bearing effect of diamond nanoparticles as an oil additive. J Phys D Appl Phys 29:2932-2937
7. Lathkar GS, Bas USK (2000) Clean metal cutting process using solid lubricants. In: Proceedings of the 19th AIMTDR conference. Narosa Publishing House IIT Madras, pp 15-31
8. Reddy NSK, Nouari M, Yang M (2010) Development of electrostatic solid lubrication system for improvement in machining process performance. Int J Mach Tools Manuf 50:789-797
9. Dilbag S, Rao PV (2008) Performance improvement of hard turning with solid lubricants. Int J Adv Manuf Technol 38:529-535
10. Sharma VS, Dogra M, Suri NM (2009) Cooling techniques for improved productivity in turning. Int J Mach Tools Manuf 49:435-453
11. Sreejith PS, Ngoi BKA (2000) Dry machining: machining of the future. J Mater Process Technol 101:287-291
12. Klocke F, Eisenblätter G (1997) Dry cutting. CIRP Ann Manuf Technol 46:519-526
13. Lee P, Naam JS, Li C, Lee SW (2012) An experimental study on micro-grinding process with nanofluid minimum quantity lubrication (MQL). Int J Precis Eng Manuf 13(3):331-338
14. He S (1982) Solid lubrication materials for high temperature: a review. Tribol Int 15:303-314
15. Miaosun S (2000) Solid lubrication materials. China Chemistry Press, Beijing
16. Nakamura T, Tanaka S, Hayakawa K, Fukai Y (2000) A study of the lubrication behavior of solid lubricants in the upsetting process. J Tribol 122:803-808
17. Alberts M, Kalaitzidou K, Melkote S (2009) An investigation of graphite nanoplatelets as lubricant in grinding. Int J Mach Tools Manuf 49:966-970
18. Deshmukh SD, Basu SK (2006) Significance of solid lubricants in metal cutting, in: 22nd AIMTDR
19. 2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy. Int J Adv Manuf Technol 67(1-4):833-849
20. Keblinski P, Phillpot SR, Choi SUS, Eastman JA (2002) Mechanisms of heat flow in suspensions of nano-sized particles (nanofluids). Int J Heat Mass Transf 45:855-863
21. Wang W, Liu K, Jiao M (2007) Thermal and non-Newtonian analysis on mixed liquid-solid lubrication. Tribol Int 40:1067-1074
22. 3 nanoparticles. Int J Heat Mass Transf 51:2651-2656
23. Murshed SMS, Leong KC, Yang C (2009) A combined model for the effective thermal conductivity of nanofluids. Appl Therm Eng 29:2477-2483
24. Masmiati N, Sarhan AAD, Hamdi M (2012) Optimizing the cutting parameters for better surface quality in 2.5D cutting utilizing titanium coated carbide ball end mill. Int J Precis Eng Manuf 13(12):2097-2102
25. Davis JR (1990) Metals handbook, Vol. 2 - Properties and selection: Nonferrous alloys and special-purpose material, 10th edn. ASM International, Materials Park, OH
26. Liew WYH (2010) Low-speed milling of stainless steel with TiAlN single-layer and TiAlN/AlCrN nano-multilayer coated carbide tools under different lubrication conditions. Wear 269:617-63
27. Yan J, Zhang Z, Kriyagawa T (2011) Effect of nano-particle lubrication in diamond turning of reaction-bonded SiC. Int J Autom Technol 5:307-312
28. Hung TC, Su YT (2006) A method for reducing tool wear in a polishing process. Int J Mach Tools Manuf 46:413-423
29. Wu YY, Tsui WC, Liu TC (2007) Experimental analysis of tribological properties of lubricating oils with nanoparticle additives. Wear 262:819-825
30. Mu-Jung Kao CRL (2009) Evaluating the role of spherical titanium oxide nanoparticles in reducing friction between two pieced of cast iron. J Alloys Compd 483:456-459
31. 2 nanolubrication system. Int J Adv Manuf Technol 63(5-8):505-512
32. Yousefi YIR (2000) A study on ultra-high-speed cutting of aluminium alloy: formation of welded metal on the secondary cutting edge of the tool and its effects on the quality of finished surface. J Int Soc Precis Eng Nanotechnol 24:371-376
33. N Suresh Kumar Reddy, P Venkateswara Rao (2006) Experimental investigation to study the effect of solid lubricants on cutting forces and surface quality in end milling. Int J Mach Tools Manuf 46:189-198
34. Sayuti M, Sarhan AAD, Tanaka T, Hamdi M, Saito Y (2013) Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system. Int J Adv Manuf Technol 65(9-12):1493-1500
35. Wakabayashi SST, Inasaki I, Terasaka K, Musha Y, Toda Y (2007) Tribological action and cutting performance of MQL media in machining of aluminium. Ann CIRP 56/1
36. Lin HSYC (2004) Limitations on use of ZDDP as an antiwear additive in boundary lubrication. Tribol Int 37:25-33
37. 3: a preliminary study. Scr Mater 45:75-80
38. Hamdan AA, Sarhan AAD, Hamdi M (2012) An optimization method of the machining parameters in high speed machining of stainless steel using coated carbide tool for best surface finish. Int J Adv Manuf Technol 58(1):81-91
39. Rapoport ONL, Lapsker I, Verdyan A, Moshkovich A, Feldman Y, Tenne R (2005) Behavior of fullerene-like WS2 nanoparticles under severe contact conditions. Wear 259:703-707
40. Rapoport VLL, Lvovsky M, Nepomnyashchy O, Volovik Y, Tenne R (2002) Mechanism of friction of fullerenes. Ind Lubr Tribol 54:171-176