An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy

International Journal of Advanced Manufacturing Technology

Volumn 67, Issue 1-4, 2013, Pages 833-849

  Sayuti, M ^a   Sarhan, Ahmed A D ^a,b   Hamdi, M ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

^b Assiut University   (Egypt)

Author keywords

Al6061 T6 alloy; Cutting force; End milling; SiO2 nanolubrication; Surface roughness

Indexed keywords

AL6061-T6 ALLOYS; CNC MILLING MACHINE; CUTTING FORCES; END MILLING; LUBRICATION CONDITION; NANO LUBRICATIONS; TAGUCHI OPTIMIZATION METHOD; TRIBOLOGICAL CHARACTERISTICS;

ALLOYS; CARRIER CONCENTRATION; CUTTING; LUBRICATION; MECHANICAL PROPERTIES; MILLING (MACHINING); SURFACE ROUGHNESS; TAGUCHI METHODS;

CERIUM ALLOYS;

EID: 84888367557     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-012-4527-z     Document Type: Article

References (46)

1. Zalnezhad E, Sarhan AAD, Hamdi M Optimizing the PVD TiN thin film coating's parameters on aerospace AL7075-T6 alloy for higher coating hardness and adhesion with better tribological properties of the coating surface. Int J Adv Manuf Technol. doi: 10.1007/s00170-012-4022-6
2. Lakshminarayanan A, Balasubramanian V, Elangovan K (2009) Effect of welding processes on tensile properties of AA6061 aluminium alloy joints. Int J Adv Manuf Technol 40:286-296
3. Shankar MR, Chandrasekar S, Compton WD, King AH (2005) Characteristics of aluminum 6061-T6 deformed to large plastic strains by machining. Mater Sci Eng, A 410-411:364-368
4. Li Y, Liang SY (1999) Cutting force analysis in transient state milling processes. Int J Adv Manuf Technol 15:785-790
5. Sarhan A, Sayed R, Nassr AA, El-Zahry RM (2001) Interrelationships between cutting force variation and tool wear in end-milling. J Mater Process Technol 109:229-235
6. Lee J, Cho S, Hwang Y, Cho H-J, Lee C, Choi Y, Ku B-C, Lee H, Lee B, Kim D, Kim SH (2009) Application of fullerene-added nano-oil for lubrication enhancement in friction surfaces. Tribol Int 42:440-447
7. Tao X, Jiazheng Z, Kang X (1996) The ball-bearing effect of diamond nanoparticles as an oil additive. J Phys D Appl Phys 29:2932-2937
8. Lathkar GS, Bas USK (2000) Clean metal cutting process using solid lubricants. In: Proceeding of the 19th AIMTDR Conference. Narosa, Madras, pp 15-31
9. Reddy NSK, Nouari M, Yang M (2010) Development of electrostatic solid lubrication system for improvement in machining process performance. Int J Mach Tool Manuf 50:789-797
10. Dilbag S, Rao PV (2008) Performance improvement of hard turning with solid lubricants. Int J Adv Manuf Technol 38:529-535
11. Sharma VS, Dogra M, Suri NM (2009) Cooling techniques for improved productivity in turning. Int J Mach Tool Manuf 49:435-453
12. Sreejith PS, Ngoi BKA (2000) Dry machining: machining of the future. J Mater Process Technol 101:287-291
13. Klocke F, Eisenblätter G (1997) Dry cutting. CIRP Ann Manuf Technol 46:519-526
14. He S (1982) Solid lubrication materials for high temperature a review. Tribol Int 15:303-314
15. Miaosun S (2000) Solid lubrication materials. China Chemistry, Beijing
16. Nakamura T, Tanaka S, Hayakawa K, Fukai Y (2000) A study of the lubrication behavior of solid lubricants in the upsetting process. J Tribol 122:803-808
17. Deshmukh SD, Basu SK (2006) Significance of solid lubricants in metal cutting. In: 22nd AIMTDR
18. Alberts M, Kalaitzidou K, Melkote S (2009) An investigation of graphite nanoplatelets as lubricant in grinding. Int J Mach Tool Manuf 49:966-970
19. Peng DX, Kang Y, Hwang RM, Shyr SS, Chang YP (2009) Tribological properties of diamond and ã€-SiOã€-2 nanoparticles added in paraffin. Tribol Int 42:911-917
20. Keblinski P, Phillpot SR, Choi SUS, Eastman JA (2002) Mechanisms of heat flow in suspensions of nano-sized particles (nanofluids). Int J Heat Mass Transf 45:855-863
21. Wang W, Liu K, Jiao M (2007) Thermal and non-Newtonian analysis on mixed liquid-solid lubrication. Tribol Int 40:1067-1074
22. Lee J-H, Hwang KS, Jang SP, Lee BH, Kim JH, Choi SUS, Choi CJ (2008) Effective viscosities and thermal conductivities of aqueous nanofluids containing low volume concentrations of Al2O3 nanoparticles. Int J Heat Mass Transf 51:2651-2656
23. Murshed SMS, Leong KC, Yang C (2009) A combined model for the effective thermal conductivity of nanofluids. Appl Therm Eng 29:2477-2483
24. 2 nanolubrication system. Int J Adv Manuf Technol, 10.1007/s00170-00012-03940-00177
25. Ahmed AD, Sarhan A, Matsubara (2011) Compensation method of the machine tool spindle thermal displacement for accurate monitoring of cutting forces. Int J Mater Manuf Processes 26:1511-1521
26. Sayuti M, Sarhan AAD, Hamdi M (2011) Experimental study on minimizing the edge chipping in glass milling operation using an internal CBN grinding tool. Int J Mater Manuf Processes 26:969-976
27. Zhang JZ, Chen JC, Kirby ED (2007) Surface roughness optimization in an end-milling operation using the Taguchi design method. J Mater Process Technol 184:233-239
28. Ghani JA, Choudhury IA, Hassan HH (2004) Application of Taguchi method in the optimization of end milling parameters. J Mater Process Technol 145:84-92
29. Hamdan A, Sarhan AAD, Hamdi M (2011) An optimization method of the machining parameters in high speed machining of stainless steel using coated carbide tool for best surface finish. Int J Adv Manuf Technol 58:81-91
30. Hsiao YF, Tarng YS, Huang WJ (2008) Optimization of plasma arc welding parameters by using the Taguchi method with the grey relational analysis. Mater Manuf Process 23:51-58
31. Sayuti M, Sarhan AAD, Fadzil M, Hamdi (2011) Enhancement and verification of a machined surface quality for glass milling operation-using CBN grinding tool-Taguchi approach. Int J Adv Manuf Technol. doi: 10.1007/s00170-011-3657-z
32. Liew WYH (2010) Low-speed milling of stainless steel with TiAlN single-layer and TiAlN/AlCrN nano-multilayer coated carbide tools under different lubrication conditions. Wear 269:617-631
33. Yan J, Zhang Z, Kriyagawa T (2011) Effect of nano-particle lubrication in diamond turning of reaction-bonded SiC. Int J Autom Technol 5:307-312
34. Tu-Chieh H, Yaw-Terng S (2005) A method for reducing tool wear in a polishing process. Int J Mach Tools Manuf 46:413-423
35. Wu WCTYY, Liu TC (2007) Experimental analysis of tribological properties of lubricating oils with nanoparticle additives. Wear 262:819-825
36. Kao M-J, Lin C-R (2008) Evaluating the role of spherical titanium oxide nanoparticles in reducing friction between two pieced of cast iron. J Alloys Compd 483:456-459
37. Rapoport VLL, Lvovsky M, Nepomnyashchy O, Yu Volovik, Tenne R (2002) Mechanism of friction of fullerenes. Ind Lubr Tribol 54:171-176
38. Lin HSYC (2004) Limitations on use of ZDDP as an antiwear additive in boundary lubrication. Tribol Int 37:25-33
39. Kwangho Lee YH, Cheong S, Choi Y, Kwon L, Lee J, Hyung Kim S (2009) Understanding the role of nanoparticles in nano-oil lubrication. Tribo Lett 35:127-131
40. Yousefi R, Ichida Y (2000) A study on ultra-high-speed cutting of aluminium alloy: formation of welded metal on the secondary cutting edge of the tool and its effects on the quality of finished surface. J Int Soc Precis Eng Nanotechnol 24:371-376
41. Suresh Kumar Reddy N, Venkateswara Rao P (2006) Experimental investigation to study the effect of solid lubricants on cutting forces and surface quality in end milling. Int J Mach Tools Manuf 46:189-198
42. Hirata A, Igarashi M, Kaito T (2004) Study on solid lubricant properties of carbon onions produced by heat treatment of diamond clusters or particles. Tribol Int 37:899-905
43. Wakabayashi SST, Inasaki I, Terasaka K, Musha Y, Toda Y (2007) Tribological action and cutting performance of MQL media in machining of aluminium. Ann CIRP 56(1):97-100
44. Prado LEMRA, Shindo DJ, Soto KF (2001) Tool wear in the friction-stir welding of aluminium alloy 6061 + 20 % Al2O3: a preliminary study. Scr Mater 45:75-80
45. Thepsonthi MHT, Mitsui K (2009) Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills. Int J Mach Tools Manuf 49:156-162
46. Rapoport ONL, Lapsker I, Verdyan A, Moshkovich A, Feldman Y, Tenne R (2005) Behavior of fullerene-like WS2 nanoparticles under severe contact conditions. Wear 259:703-707