Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system

Journal of Cleaner Production

Volumn 66, Issue , 2014, Pages 655-663

  Sayuti, Mohd ^a   Erh, Ooi Ming ^a   Sarhan, Ahmed A D ^a,b   Hamdi, Mohd ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

^b Assiut University   (Egypt)

Author keywords

End milling; Field Emission Scanning Electron Microscopy; Morphological analysis; SiO2 nanolubrication

Indexed keywords

END MILLING; ENERGY DISPERSIVE X-RAY; FIELD EMISSION SCANNING ELECTRON MICROSCOPY; MACHINING PERFORMANCE; MORPHOLOGICAL ANALYSIS; NANO LUBRICATIONS; TEMPERATURE AND PRESSURES; THERMAL DEFORMATION;

AUTOMOTIVE INDUSTRY; CUTTING; FIELD EMISSION MICROSCOPES; INTERFACES (MATERIALS); LINGUISTICS; LUBRICATING OILS; MECHANICAL PROPERTIES; MILLING (MACHINING); MORPHOLOGY; NANOPARTICLES; SURFACE PROPERTIES;

TOOLS;

EID: 84893714331     PISSN: 09596526     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jclepro.2013.11.058     Document Type: Article

References (27)

1. M. Alberts, K. Kalaitzidou, and S. Melkote An investigation of graphite nanoplatelets as lubricant in grinding Int. J. Mach. Tools Manuf. 49 2009 966 970
2. A. Attanasio, M. Gelfi, C. Giardini, and C. Remino Minimal quantity lubrication in turning: effect on tool wear Wear 260 2006 333 338
3. M.H. Cetin, B. Ozcelik, E. Kuram, and E. Demirbas Evaluation of vegetable based cutting fluids with extreme pressure and cutting parameters in turning of AISI 304L by Taguchi method J. Clean. Prod. 19 2011 2049 2056
4. S. Dilbag, and P.V. Rao Performance improvement of hard turning with solid lubricants Int. J. Adv. Manuf. Technol. 38 2008 529 535
5. D. Fratila Evaluation of near-dry machining effects on gear milling process efficiency J. Clean. Prod. 17 2009 839 845
6. D. Fratila, and C. Caizar Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3 J. Clean. Prod. 19 2011 640 645
7. A. Hamdan, A.A.D. Sarhan, and M. Hamdi An Optimization method of the machining parameters in high speed machining of stainless steel using coated carbide tool for best surface finish Int. J. Adv. Manuf. Technol. 58 2011 81 91
8. A.K. Jha, S.V. Prasad, and G.S. Upadhyaya Dry sliding wear of sintered 6061 aluminium alloy - graphite particle composites Tribol. Int. 22 1989 321 327
9. F. Klocke, and G. Eisenblätter Dry cutting CIRP Ann. Manuf. Technol. 46 1997 519 526
10. B.-C. Ku, Y.-C. Han, J.-E. Lee, J.-K. Lee, S.-H. Park, and Y.-J. Hwang Tribological effects of fullerene nanoparticles added in mineral lubricants according to its viscosity Int. J. Precis. Eng. Manuf. 11 2010 607 611
11. S.A. Lawal, I.A. Choudhury, and Y. Nukman A critical assessment of lubrication techniques in machining processes: a case for minimum quantity lubrication using vegetable oil-based lubricant J. Clean. Prod. 41 2013 210 221
12. K. Lee, Y. Hwang, S. Cheong, Y. Choi, L. Kwon, J. Lee, and S.H. Kim Understanding the role of nanoparticles in nano-oil lubrication Tribol. Lett. 35 2009
13. T. Nakamura, S. Tanaka, K. Hayakawa, and Y. Fukai A study of the lubrication behavior of solid lubricants in the upsetting process J. Tribol. 122 2000 803 808
14. 2 nanoparticles added in paraffin Tribol. Int. 42 2009 911 917
15. N.S.K. Reddy, M. Nouari, and M. Yang Development of electrostatic solid lubrication system for improvement in machining process performance Int. J. Mach. Tools Manuf. 50 2010 789 797
16. A. Sarhan, R. Sayed, A.A. Nassr, and R.M. El-Zahry Interrelationships between cutting force variation and tool wear in end-milling J. Mater. Process. Technol. 109 2001 229 235
17. 2 nanolubrication system Int. J. Adv. Manuf. Technol 63 2012 505 512
18. A.A.D. Sarhan, and A. Matsubara Compensation method of the machine tool spindle thermal displacement for accurate monitoring of cutting forces Int. J. Mater. Manuf. Process. 26 2011 1511 1521
19. 2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy Int. J. Adv. Manuf. Technol. 67 2013 833 849
20. S. Shaji, and V. Radhakrishnan Analysis of process parameters in surface grinding with graphite as lubricant based on the Taguchi method J. Mater. Process. Technol. 141 2003 51 59
21. S. Shaji, and V. Radhakrishnan Application of solid lubricants in Grinding: Investigations on graphite sandwiched grinding wheels Int. J. Mach. Sci. Technol. 7 2003 137 155
22. B.S. Shenoy, K.G. Binu, R. Pai, D.S. Rao, and R.S. Pai Effect of nanoparticles additives on the performance of an externally adjustable fluid film bearing Tribol. Int. 45 2012 38 42
23. P.S. Sreejith, and B.K.A. Ngoi Dry machining: machining of the future J. Mater. Process. Technol. 101 2000 287 291
24. X.C. Tan, F. Liu, H.J. Cao, and H. Zhang A decision-making framework model of cutting fluid selection for green manufacturing and a case study J. Mater. Process. Technol. 129 2002 467 470
25. J.A. Williams Wear and wear particles - some fundamentals Tribol. Int. 38 2005 863 870
26. B.-S. Zhang, B.-S. Xu, Y. Xu, F. Gao, P.-J. Shi, and Y.-X. Wu CU nanoparticles effect on the tribological properties of hydrosilicate powders as lubricant additive for steel-steel contacts Tribol. Int. 44 2011 878 886
27. Z. Zhang, J. Yan, and T. Kuriyagawa Study on tool wear characteristics in diamond turning of reaction-bonded silicon carbide Int. J. Adv. Manuf. Technol. 57 2011 117 125