Construction and Properties of Structure- and Size-controlled Micro/nano-Energetic Materials

Defence Technology

Volumn 9, Issue 2, 2013, Pages 59-79

  Huang, Bing ^a,b   Cao, Min hua ^a   Nie, Fu de ^b   Huang, Hui ^b   Hu, Chang wen ^a  

^a BEIJING INSTITUTE OF TECHNOLOGY   (China)

^b RESEARCH CENTER OF LASER FUSION   (China)

Author keywords

Construction technologies; Micro nano energetic materials; Properties; Size; Structure

Indexed keywords

EID: 84929758142     PISSN: None     EISSN: 22149147     Source Type: Journal    
DOI: 10.1016/j.dt.2013.10.003     Document Type: Review

References (214)

1. Jenekhe, S.A., Chen, X.L., Self-assembly of ordered microporous materials from rod-coil block copolymers. Science 279 (1998), 1903–1908.
2. Whitesides, G.M., Grzybowski, B., Self-assembly at all scales. Science 295 (2002), 2418–2421.
3. Tian, Z.R., Voigt, J.A., Liu, J., Mckenzie, B., Mcdermott, M.J., Rodriguez, M.A., et al. Complex and oriented ZnO nanostructures. Nat Mater 2 (2003), 821–826.
4. Park, S., Lim, J.H., Chung, S.W., Mirkin, C.A., Self-assembly of mesoscopic metal-polymer amphiphiles. Science 303 (2004), 348–351.
5. Cölfen, H., Mann, S., Higher-order organization by mesoscale self-assembly and transformation of hybrid nanostructures. Angew Chem Int Ed 42:21 (2003), 2350–2365.
6. Yamamoto, Y., Fukushima, T., Suna, Y., Ishii, N., Saeki, A., Seki, S., et al. Photoconductive coaxial nanotubes of molecularly connected electron donor and acceptor layers. Science 314 (2006), 1761–1764.
7. Fardy, M., Yang, P.D., Materials science: lilliputian light sticks. Nature 451 (2008), 408–409.
8. Heo, J.S., Park, N.H., Ryu, J.H., Suh, K.D., Novel light-emitting diodes using organic electroluminescent nanocapsules. Adv Mater 17:7 (2005), 822–826.
9. Schwab, A.D., Smith, D.E., Bond-Watts, B., Johnston, D.E., Hone, J., Johnson, A.T., et al. Photoconductivity of self-assembled porphyrin nanorods. Nano Lett 4:7 (2004), 1261–1265.
10. Zhang, Y.X., Liu, D.B., Lv, C.X., Preparation and characterization of reticular nano-HMX. Propellants Explos Pyrotech 30:6 (2005), 438–441.
11. Gagliardi, F.J., Chambers, R.D., Tran, T.D., Small-scale performance testing for studying new explosives. 6th VACENT technical international conference, Milpitas, CA, United States, June 4, 2005 UCRL–CONF–212196.
12. Saw, C.K., Kinetics of HMX and phase transitions: effects of grain size at elevated temperature. Proceedings of the 12th international detonation symposium, San Diego, CA, August 11–16, 2002 UCRL–JC–145228.
13. Gash, A., Barbee, T., Cervantes, O., Stab sensitivity of energetic nanolaminates. 33rd international pyrotechnic seminar, Fort Collins, Co, United States, July 16–21, 2006 UCRL–PROC–221604.
14. Khasainov, B.A., Ermolaev, B.S., Presles, H.N., Vidal, P., On the effect of grain size on shock sensitivity of heterogeneous high explosives. Shock Waves 7 (1997), 89–105.
15. Manaa, M.R., Reed, E.J., Fried, L.E., Goldman, N., Nitrogen-rich heterocycles as reactivity retardants in shocked insensitive explosives. J Am Chem Soc 131:15 (2009), 5483–5487.
16. Zhang, C.Y., Wang, X.C., Huang, H., π-stacked interactions in explosive crystals: buffers against external mechanical stimuli. J Am Chem Soc 130:26 (2008), 8359–8365.
17. Gökçınar, E., Klapötke, T.M., Bellamy, A.J., Computational study on 2,6-diamino-3,5-dinitropyrazine and its 1-oxide and 1,4-dioxide derivatives. J Mol Struct Theochem 953:1–3 (2010), 18–23.
18. Kaur, J., Arya, V.P., Kaur, G., Gupta, Y.P., Verma, M.M., Lata, P., Determination of solvent contamination and characterization of ultrafine HNS particles after solvent recrystallization. Propellants Explos Pyrotech 35:5 (2010), 487–493.
19. Prourmortazavi, S.M., Hajimirsadeghi, S.S., Application of supercritical carbon dioxide in energetic materials processes: a review. Ind Eng Chem Res 44:17 (2005), 6523–6533.
20. 2 solutions. Phys Chem Chem Phys 9 (2007), 5249–5259.
21. Frolov, Y., Pivkina, A., Ulyanova, P., Zavyalov, S., Nanomaterials and nanostructures as components for high-energy condensed Systems. Proceedings of 28th international pyrotechnic seminar, Adelaide, Australia, November 4–9, 2001, 311–314.
22. Gong, X.C., Milic, T., Xu, C., Batteas, J.D., Drain, C.M., Preparation and characterization of porphyrin nanoparticles. J Am Chem Soc 124:48 (2002), 14290–14291.
23. Kasai, H., Kamatani, H., Okada, S., Oikawa, H., Matsuda, H., Nakanishi, H., Size-dependent colors and luminescences of organic microcrystals. Jpn J Appl Phys 35 (1996), L221–L223.
24. Li, S.Y., He, L.M., Xiong, F., Li, Y., Yang, G.Q., Enhanced fluorescent emission of organic nanoparticles of an intramolecular proton transfer compound and spontaneous formation of one-dimensional nanostructures. J Phys Chem B 108:30 (2004), 10887–10892.
25. Hu, J.S., Guo, Y.G., Liang, H.P., Wan, L.J., Jiang, L., Three-dimensional self-organization of supramolecular self-assembled porphyrin hollow hexagonal nanoprisms. J Am Chem Soc 127:48 (2005), 17090–17095.
26. Zhang, X.J., Zhang, X.H., Shi, W.S., Meng, X.M., Lee, C.S., Lee, S.T., Single-crystal organic microtubes with a rectangular cross section. Angew Chem Int Ed 46:9 (2007), 1525–1528.
27. Chaudhuri, D., Li, D.B., Che, Y.K., Shafran, E., Gerton, J.M., Zang, L., et al. Enhancing long-range exciton guiding in molecular nanowires by H-aggregation lifetime engineering. Nano Lett 11:2 (2011), 488–492.
28. Chiu, J.J., Kei, C.C., Perng, T.P., Wang, W.S., Organic semiconductor nanowires for field emission. Adv Mater 15:16 (2003), 1361–1364.
29. Al-Kaysi, R.O., Bardeen, C.J., General method for the synthesis of crystalline organic nanorods using porous alumina templates. Chem Commun, 2006, 1224–1226.
30. Zhao, Y.S., Fu, H.B., Peng, A.D., Ma, Y., Liao, Q., Yao, J.N., Construction and optoelectronic properties of organic one-dimensional nanostructures. Acc Chem Res 43:3 (2010), 409–418.
31. Cui, Q.H., Jiang, L., Zhang, C., Zhao, Y.S., Hu, W.P., Yao, J.N., Coaxial organic p-n heterojunction nanowire arrays: one-step synthesis and photoelectric properties. Adv Mater 24:17 (2012), 2332–2336.
32. Zhang, X.J., Zhang, X.H., Zou, K., Lee, C.S., Lee, S.T., Single-crystal nanoribbons, nanotubes, and nanowires from intramolecular charge-transfer organic molecules. J Am Chem Soc 129:12 (2007), 3527–3532.
33. Zhang, C.Y., Zhang, X.J., Zhang, X.H., Fan, X., Jie, J.S., Chang, J.C., et al. Facile one-step growth and patterning of aligned squaraine nanowires via evaporation-induced self-assembly. Adv Mater 20:9 (2008), 1716–1720.
34. Kim, J.W., Kim, J.K., Kim, H.S., Koo, K.K., Application of internal seeding and temperature cycling for reduction of liquid inclusion in the crystallization of RDX. Org Process Res Dev 15:3 (2011), 602–609.
35. Han, T.Y.J., Pagoria, P.F., Gash, A.E., Maiti, A., Orme, C.A., Mitchell, A.R., et al. The solubility and recrystallization of 1,3,5-triamino-2,4,6-trinitrobenzene in a 3-ethyl-1-methylimidazolium acetate–DMSO co-solvent system. New J Chem 33 (2009), 50–56.
36. Daniel, M.A., Davies, P.J., Lochert, I.J., FOX-7 for insensitive boosters. August, 2010, Weapons Systems Division Defence Science and Technology Organisation DSTO–TR–2449.
37. vander Heijden, A.E.D.M., Bouma, R.H.B., vander Steen, A.C., Physicochemical parameters of nitramines influencing shock sensitivity. Propellants Explos Pyrotech 29:5 (2004), 304–313.
38. Vijayalakshmi, R., Radhakrishnan, S., Rajendra, P.S., Girish, G.M., Arun, S.K., Particle size management studies on spherical 3-nitro-1,2,4-triazol-5-one. Part Part Syst Charact 28:3–4 (2012), 57–63.
39. Kim, K.J., Kim, K.M., Growth kinetics in seeded cooling crystallization of 3-nitro-1,2,4-triazol-5-one in water–N-methylpyrrolidone. Powder Technol 122:1 (2002), 46–53.
40. Kim, K.J., Kim, K.M., Nucleation kinetics in spherulitic crystallization of explosive compound: 3-nitro-1,2,4-triazol-5-one. [J] Powder Technol 119:2–3 (2001), 109–116.
41. Kim, K.J., Spherulitic crystallization of 3-nitro-1,2,4-triazol-5-one in water + N-methyl-2-pyrrolidone. J Cryst Growth 208 (2000), 569–578.
42. Kim, K.J., Kim, K.M., Lee, J.M., Kim, H.S., Park, B.S., Lee, J.W., Scale-up of crystallizer for producing spherical crystals of NTO. 31st international annual conference of ICT, Karlsruhe, Federal Republic of Germany, June 27–30, 2000 p. 121/1–5.
43. Kim, K.J., Lee, J.M., Kim, H.S., Park, B.S., Seeded batch cooling crystallization of 3-nitro-1,2,4-triazol-5-one. 32nd international annual conference of ICT, Karlsruhe, Federal Republic of Germany, July 3–6, 2001 p. 125/1–7.
44. Jung, J.W., Kim, K.J., Effect of supersaturation on the morphology of coated surface in coating by solution crystallization. Ind Eng Chem Res 50:6 (2011), 3475–3482.
45. Kim, K.J., Kim, H.S., Agglomeration of NTO on the surface of HMX particles in water–NMP solvent. Cryst Res Technol 43:1 (2008), 87–92.
46. Nalwa, H.S., Kasai, H., Kamatani, H., Okada, S., Oikawa, H., Matsuda, H., et al. Fabrication of organic nanocrystals for electronics and photonics. Adv Mater 5:10 (1993), 758–760.
47. Talawar, M.B., Agarwal, A.P., Anniyappan, M., Gore, G.M., Asthana, S.N., Venugopalan, S., Method for preparation of fine TATB (2–5 μm) and its evaluation in plastic bonded explosive (PBX) formulations. J Hazard Mater 137:3 (2006), 1848–1852.
48. Nandi, A.K., Kasar, S.M., Thanigaivelan, U., Ghosh, M., Mandal, A.K., Bhattacharyya, S.C., Synthesis and characterization of ultrafine TATB. J Energ Mater 25:4 (2007), 213–231.
49. Yang, L., Ren, X.T., Li, T.C., Wang, S.W., Zhang, T.L., Preparation of ultrafine TATB and the technology for crystal morphology control. Chin J Chem 30:2 (2012), 293–298.
50. Xu, J.J., Tian, Y., Liu, Y., Zhang, H.B., Shu, Y.J., Sun, J., Polymorphism in hexanitrohexaazaisowurtzitane crystallized from solution. J Cryst Growth 354:1 (2012), 13–19.
51. Wang, Y., Song, X.L., Song, D., Jiang, W., Liu, H.Y., Li, F.S., Dependence of the mechanical sensitivity on the fractal characteristics of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine particles. Propellants Explos Pyrotech 36:6 (2011), 505–512.
52. Song, X.L., Wang, Y., An, C.W., Guo, X.D., Li, F.S., Dependence of particle morphology and size on the mechanical sensitivity and thermal stability of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine. J Hazard Mater 159:2–3 (2008), 222–229.
53. Lee, K.Y., Moore, D.S., Asay, B.W., Llobet, A., Submicron-sized gamma-HMX: 1. Preparation and initial characterization. J Energ Mater 25:3 (2007), 161–171.
54. Moore, D.S., Lee, K.Y., Hagelberg, S.I., Submicron-sized gamma-HMX: II. Effect of pressing on phase transition. J Energ Mater 26:1 (2008), 70–78.
55. Chen, J., Qiao, Z.Q., Wang, L.L., Nie, F.D., Yang, G.C., Huang, H., Fabrication of rectangular 2,6-diamino-3,5-dinitropyrazine-1-oxide microtubes. Mater Lett 65:6 (2011), 1018–1021.
56. Qiao, Z.Q., Tang, Y.P., Zeng, G.Y., Study of preparation of different crystal shape fine particle size RDX. Chin J Energ Mater 12 (2004), 116–118.
57. Zhang, S.H., Zhang, J.L., Wang, J.Y., Preparation and properties of sub-micron nitramine explosives. 35th international annual conference of ICT, Karlsruhe, Federal Republic of Germany, June 29–July 2, 2004 p. 100/1–4.
58. Wang, J.Y., Huang, H., Xu, W.Z., Zhang, Y.R., Lu, B., Xie, R.Z., et al. Prefilming twin-fluid nozzle assisted precipitation method for preparing nanocrystalline HNS and its characterization. J Hazard Mater 162:2–3 (2009), 842–847.
59. Huang, H., Wang, J.Y., Xu, W.Z., Xie, R.Z., Effect of habit modifiers on morphology and properties of nano-HNS explosive in prefilming twin-fluid nozzle-assisted precipitation. Propellants Explos Pyrotech 34:1 (2009), 78–83.
60. Yang, G.C., Nie, F.D., Huang, H., Zhao, L., Pang, W.T., Preparation and characterization of nano-TATB explosive. Propellants Explos Pyrotech 31:5 (2006), 390–394.
61. Nie, F.D., Yang, G.C., Zeng, G.Y., Qiao, Z.Q., Huang, H., Preparation and properties of ultrafine TATB particles. 10th international seminar—new trends in research of energetic materials, Pardubice, Czech Republic, April 25–27, 2007, 452–457.
62. Bayat, Y., Eghdamtalab, M., Zeynali, V., Control of the particle size of submicron HMX explosive by spraying in non-solvent. J Energ Mater 28:4 (2010), 273–284.
63. Shokrolahi, A., Zali, A., Mousaviazar, A., Keshavarz, M.H., Hajhashemi, H., Preparation of nano-K-6 (nano-Keto RDX) and determination of its characterization and thermolysis. J Energ Mater 29:2 (2011), 115–126.
64. Teipel, U., Mikonsaari, I., Size reduction of particulate energetic material. Propellants Explos Pyrotech 27:3 (2002), 168–174.
65. Patil, M.N., Gore, G.M., Pandit, A.B., Ultrasonically controlled particle size distribution of explosives: a safe method. Ultrason Sonochem 15:3 (2008), 177–187.
66. Koo, K.J., Kim, K.M., Lee, J.M., Microparticle formation of 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane by crystallizations with ultrasound. 32nd international annual conference of ICT, Karlsruhe, Federal Republic of Germany, July 3–6, 2001 p. 124/1–5.
67. Sivabalan, R., Gore, G.M., Nair, U.R., Saikia, A., Venugopalan, S., Gandhe, B.R., Study on ultrasound assisted precipitation of CL-20 and its effect on morphology and sensitivity. J Hazard Mater 139:2 (2007), 199–203.
68. Bayat, Y., Zeynali, V., Preparation and characterization of nano-CL-20 explosive. J Energ Mater 29:4 (2011), 281–291.
69. Wang, J.Y., Li, J.L., An, C.W., Hou, C.H., Xu, W.Z., Li, X.D., Study on ultrasound- and spray-assisted precipitation of CL-20. Propellants Explos Pyrotech 37:6 (2012), 670–675.
70. Ma, C.A., Sheng, J.F., Brandon, N., Zhang, C., Li, G.H., Preparation of tungsten carbide-supported nano platinum catalyst and its electrocatalytic activity for hydrogen evolution. Int J Hydrog Energy 32:14 (2007), 2824–2829.
71. Anal, A.K., Stevens, W.F., Remunán-López, C., Ionotropic cross-linked chitosan microspheres for controlled release of ampicillin. Int J Pharm 312:1–2 (2006), 166–173.
72. TM). Eur J Pharm Biopharm 46:2 (1998), 145–151.
73. Mercado, L., Torres, P.M., Gomez, L.M., Mina, N., Hernández, S.P., Lareau, R., et al. Synthesis and characterization of high-energy nanoparticles. J Phys Chem B 108:33 (2004), 12314–12317.
74. Wang, J.Y., Huang, H., Jiao, Q.J., Lei, L., Hua, J., Yun, N., et al. Modification of ultrafine HNS explosive by spray drying process. 40th international annual conference of ICT, Karlsruhe, Federal Republic of Germany, June 23–26, 2009 p. 59/1–12.
75. Qiu, H.W., Stepanov, V., Chou, T., Surapaneni, A., Di Stasio, A.R., Lee, W.Y., Single-step production and formulation of HMX nanocrystals. Powder Technol 226 (2012), 235–238.
76. Zhigach, A.N., Leipunskii, I.O., Berezkina, N.G., Pshechenkov, P.A., Zotova, E.S., Kudrov, B.V., et al. Aluminized nitramine-based nanocomposites: manufacturing technique and structure study. Combust Explo Shock Waves 45:6 (2009), 666–677.
77. Yang, G.C., Nie, F.D., Preparation and characterization of core/shell structure of HMX/NTO composite particles. Sci Tech Energ Mater 67:2 (2006), 77–81.
78. Yang, G.C., Nie, F.D., Zeng, G.Y., Preparation of fine TATB-BTF core-shell composite particles. Chin J Explos Propellants 28:2 (2005), 72–74.
79. Jaworek, A., Micro- and nanoparticle production by electrospraying. Powder Technol 176:1 (2007), 18–35.
80. Taylor, G.I., Disintegration of water drops in an electric field. Proc R Soc Lond Ser A 280:1382 (1964), 383–397.
81. Radacsi, N., Stankiewicz, A.I., Creyghton, Y.L.M., van der Heijden, A.E.D.M., ter Horst, J.H., Electrospray crystallization for high-quality submicron-sized crystals. Chem Eng Technol 34:4 (2011), 624–630.
82. Reus, M., Stankiewicz, A., ter Horst, J., van der Heijden, A., Electrospray crystallization of encapsulated sub-micro particles of energetic materials. 43rd international annual conference of the Fraunhofer ICT, Karlsruhe, Federal Republic of Germany, June 23–29, 2012 p. 37/1–12.
83. Bang, J.H., Suslick, K.S., Applications of ultrasound to the synthesis of nanostructured materials. Adv Mater 22:10 (2010), 1039–1059.
84. Spitzer, D., Baras, C., Schäfer, M.R., Ciszek, F., Siegert, B., Continuous crystallization of submicrometer energetic compounds. Propellants Explos Pyrotech 36:1 (2011), 65–74.
85. Spitzer, D., Baras, C., Ciszek, F., Schäfer, M.R., Continuous crystallization of submicron energetic compounds. 37th international annual conference of ICT, Karlsruhe, Federal Republic of Germany, June 27–30, 2006 p. 144/1–13.
86. Stepanov, V., Qiu, H.W., Di Stasio, A.R., Lee, W.Y., Preparation and properties of nanostructured RDX/polymer compositions. 41st international annual conference of ICT, Karlsruhe, Federal Republic of Germany, June 29–July 2, 2010 p. 26/1–6.
87. Stepanov, V., Qiu, H.W., Surapaneni, A., Production and characterization of novel energetic compositions by spray drying. 43rd international annual conference of the Fraunhofer ICT, Karlsruhe, Federal Republic of Germany, June 23–29, 2012 p. 38/1–6.
88. Qiu, H.W., Stepanov, V., Di Stasio, A.R., Chou, T., Lee, W.Y., RDX-based nanocomposite microparticles for significantly reduced shock sensitivity. J Hazard Mater 185:1 (2011), 489–493.
89. Kim, J.W., Shin, M.S., Kim, J.K., Kim, H.S., Koo, K.K., Evaporation crystallization of RDX by ultrasonic spray. Ind Eng Chem Res 50:21 (2011), 12186–12193.
90. Kim, J.K., Jo, C.H., Kim, J.W., Kim, H.S., Koo, K.K., Preparation of RDX particles by ultrasonic atomization. 13th international seminar—new trends in research of energetic materials, Pardubice, Czech Republic, April 21–23, 2010, 513–517.
91. Maa, Y.F., Nguyen, P.A., Sweeney, T., Shire, S.J., Hsu, C.C., Protein inhalation powders: spray drying vs spray freeze drying. Pharm Res 16:2 (1999), 249–254.
92. 3 composites with high specific surface area. J Mater Chem 19 (2009), 3914–3922.
93. Engstrom, J.D., Simpson, D.T., Lai, E.S., Williams, R.O. III, Johnston, K.P., Morphology of protein particles produced by spray freezing of concentrated solutions. Eur J Pharm Biopharm 65:2 (2007), 149–162.
94. McGrath, P.J., Laine, R.M., Theoretical process development for freeze-drying spray-frozen aerosols. J Am Ceram Soc 75:5 (1992), 1223–1228.
95. Rigterink, M.D., Advances in technology of the cryochemical process. Am Ceram Soc Bull 51:2 (1972), 158–161.
96. Yang, G.C., Nie, F.D., Li, J.S., Guo, Q.X., Qiao, Z.Q., Preparation and characterization of nano-NTO explosive. J Energ Mater 25:1 (2007), 35–47.
97. Huang, B., Qiao, Z.Q., Nie, F.D., Cao, M.H., Su, J., Huang, H., et al. Fabrication of FOX-7 quasi-three-dimensional grids of one-dimensional nanostructures via a spray freeze-drying technique and size-dependence of thermal properties. J Hazard Mater 184:1–3 (2010), 561–566.
98. 2 core-shell nanoparticles with tunable properties. ACS Nano 2:5 (2008), 847–856.
99. 3 nanocomposites. Chem Mater 18:3 (2006), 614–619.
100. Scheubert, U., Husing, N., Lorenz, A., Hybrid inorganic-organic materials by sol-gel processing of organofunctional metal alkoxides. Chem Mater 7:11 (1995), 2010–2027.
101. Tillotson, T.M., Gash, A.E., Simpson, R.L., Hrubesh, L.W., Satcher, J.H. Jr., Poco, J.F., Nanostructured energetic materials using sol-gel methodologies. J Non-Cryst Solids 285:1–3 (2001), 338–345.
102. Tappan, B.C., Brill, T.B., Very sensitive energetic materials highly loaded into RF matrices by the sol-gel method. 33rd international annual conference of ICT, Karlsruhe, Federal Republic of Germany, June 25–28, 2002 p. 38/1–10.
103. Tappan, B.C., Brill, T.B., Thermal decomposition of energetic materials 85: cryogels of nanoscale hydrazinium diperchlorate in resorcinol-formaldehyde. Propellants Explos Pyrotech 28:2 (2003), 72–76.
104. Clapsaddle, B.J., Zhao, L.H., Prentice, D., Pantoya, M.L., Gash, A.E., Satcher, J.H. Jr., et al. Formulation and performance of novel energetic nanocomposites and gas generators prepared by sol-gel methods. 36th international annual conference of ICT & 32nd international pyrotechnics seminar, Karlsruhe, Federal Republic of Germany, June 28–July 1, 2005 p. 39/1–11.
105. Tillotson, T.M., Hrubesh, L.W., Simpson, R.L., Lee, R.S., Swansiger, R.W., Simpson, L.R., Sol-gel processing of energetic materials. J Non-Cryst Solids 225 (1998), 358–363.
106. Tappan, B.C., Brill, T.B., Thermal decomposition of energetic materials 86. Cryogel synthesis of nanocrystalline CL-20 coated with cured nitrocellulose. Propellants Explos Pyrotech 28:5 (2003), 223–230.
107. Li, J., Brill, T.B., Nanostructured energetic composites of CL-20 and binders synthesized by sol gel methods. Propellants Explos Pyrotech 31:1 (2006), 61–69.
108. Tappan, B.C., Brill, T.B., Cryogel synthesis of nanocrystalline CL-20 coated with cured nitrocellulose. 34th international annual conference of ICT, Karlsruhe, Federal Republic of Germany, June 24–27, 2003 p. 29/1–10.
109. Ingale, S.V., Sastry, P.U., Patra, A.K., Tewari, R., Wagh, P.B., Gupta, S.C., Micro structural investigations on TNT and PETN incorporated silica xerogels. J Sol-Gel Sci Technol 54:2 (2010), 238–242.
110. Ingale, S.V., Wagh, P.B., Sastry, P.U., Patra, A.K., Tewari, R., Singh, I.K., et al. Nanocrystalline pentaerythritoltetranitrate using sol-gel process. Defence Sci J 61:6 (2011), 534–539.
111. Nie, F.D., Zhang, J., Guo, Q.X., Qiao, Z.Q., Zeng, G.Y., Sol-gel synthesis of nanocomposite crystalline HMX/AP coated by resorcinol–formaldehyde. J Phys Chem Solids 71:2 (2010), 109–113.
112. Zhang, J., Yang, G.C., Nie, F.D., Preparation of RDX/RF nanocomposite energetic particles by emulsion-sol-gel technique. Chin J Energ Mater 18:6 (2010), 643–647.
113. 2 nanocomposite energetic material by the sol-gel method. Propellants Explos Pyrotech 37:4 (2012), 422–426.
114. Pourmortazavi, S.M., Sefidkon, F., Hosseini, S.G., Supercritical carbon dioxide extraction of essential oils from Perovskia atriplicifolia benth. J Agric Food Chem 51:18 (2003), 5414–5419.
115. Pourmortazavi, S.M., Ghadiri, M., Hajimirsadeghi, S.S., Supercritical fluid extraction of volatile components from Bunium persicum Boiss. (black cumin) and Mespilus germanica L. (medlar) seeds. J Food Compos Anal 18:5 (2005), 439–446.
116. Pourmortazavi, S.M., Baghaee, P., Mirhosseini, M.A., Extraction of volatile compounds from Juniperus communis L. leaves with supercritical fiuid carbon dioxide: comparison with hydrodistillation. Flavour Fragrane J 19:5 (2004), 417–420.
117. Miranda, S., Yaeger, S., Homing on the best size reduction method. Chem Eng 105:12 (1998), 102–110.
118. Svensson, L., Nyqvist, J.O., Westling, L., Crystallization of HMX from γ-butyrolactone. J Hazard Mater 13:1 (1986), 103–108.
119. Teipel, U., Förter-Barth, U., Krause, H.H., Crystallization of HMX-particles by using the gas anti-solvent-process. Propellants Explos Pyrotech 24:3 (1999), 195–198.
120. Morris, J.B., Solubility of RDX in dense carbon dioxide at temperatures between 303 K and 353 K. J Chem Eng Data 43:2 (1998), 269–273.
121. Kröber, H., Reinhard, W., Teipel, U., Supercritical fluid technology: a new process on formation of energetic materials. 32nd international annual conference of ICT, Karlsruhe, Federal Republic of Germany, July 3–6, 2001 p. 48/1–13.
122. Lee, B.M., Kim, D.S., Lee, Y.H., Lee, B.C., Kim, H.S., Kim, H., et al. Preparation of submicron-sized RDX particles by rapid expansion of solution using compressed liquid dimethyl ether. J Supercrit Fluids 57:3 (2011), 251–258.
123. Stepanov, V., Krasnoperov, L.N., Elkina, I.B., Zhang, X., Production of nanocrystalline RDX by rapid expansion of supercritical solutions. Propellants Explos Pyrotech 30:3 (2005), 178–183.
124. Stepanov, V., Samuels, P., Elkina, I.B., Zhang, X., Lavrik, N.L., Krasnoperov, L.N., Recrystallization of RDX by rapid expansion of supercritical solutions (RESS). 36th international annual conference of ICT & 32nd international pyrotechnics seminar, Karlsruhe, Federal Republic of Germany, June 28–July 1, 2005 p. 189/1–8.
125. Stepanov, V., Anglade, V., Balas, W., Bezmelnitsyn, A., Krasnoperov, L.N., Processing and characterization of nanocrystalline RDX. 39th international annual conference of ICT, Karlsruhe, Karlsruhe, Federal Republic of Germany, June 24–27, 2008 p. 54/1–15.
126. Stepanov, V., Anglade, V., Balas Hummers, W.A., Bezmelnitsyn, A.V., Krasnoperov, L.N., Production and sensitivity evaluation of nanocrystalline RDX-based explosive compositions. Propellants Explos Pyrotech 36:3 (2011), 240–246.
127. Muller, M., Meier, U., Kesseler, A., Mazzotti, M., Experimental study of the effect of process parameters in the recrystallization of an organic compound using compressed carbon dioxide as antisolvent. Ind Eng Chem Res 39:7 (2000), 2260–2268.
128. Lee, B.M., Jeong, J.S., Lee, Y.H., Lee, B.C., Kim, H.S., Kim, H., et al. Supercritical antisolvent micronization of cyclotrimethylenetrinitramin: influence of the organic solvent. Ind Eng Chem Res 48:24 (2009), 11162–11167.
129. Lee, B.M., Kim, S.J., Lee, B.C., Kim, H.S., Kim, H., Lee, Y.W., Preparation of micronized β-HMX using supercritical carbon dioxide as antisolvent. Ind Eng Chem Res 50:15 (2011), 9107–9115.
130. Kim, S.J., Lee, B.M., Lee, B.C., Kim, H.S., Kim, H., Lee, Y.W., Recrystallization of cyclotetramethylenetetranitramine (HMX) using gas anti-solvent (GAS) process. J Supercrit Fluids 59 (2011), 108–116.
131. Dou, H., Kim, K.H., Lee, B.C., Choe, J., Kim, H.S., Lee, S., Preparation and characterization of cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX) powder: comparison of microscopy, dynamic light scattering and field-flow fractionation for size characterization. Powder Technol 235 (2013), 814–822.
132. Dou, H., Kim, K.H., Kim, S.T., Lee, B.C., Kim, H.S., Jung, E.C., et al. Asymmetrical flow field-flow fractionation for characterization of cyclotrimethylene trinitramine (RDX) particles prepared by supercritical anti-solvent recrystallization. Chromatographia 75:15–16 (2012), 903–911.
133. Kim, C.K., Lee, B.C., Lee, Y.W., Lee, Y.W., Kim, H.S., Solvent effect on particle morphology in recrystallization of HMX (cyclotetramethylenetetranitramine) using supercritical carbon dioxide as antisolvent. Korean J Chem Eng 26:4 (2009), 1125–1129.
134. Bayat, Y., Pourmortazavi, S.M., Iravani, H., Ahadi, H., Statistical optimization of supercritical carbon dioxide antisolvent process for preparation of HMX nanoparticles. J Supercrit Fluids 72 (2012), 248–254.
135. Al-Kaysi, R.O., Müller, A.M., Bardeen, C.J., Photochemically driven shape changes of crystalline organic nanorods. J Am Chem Soc 128:50 (2006), 15938–15939.
136. Wang, K.X., Zhang, W.H., Phelan, R., Morris, M.A., Holmes, J.D., Direct fabrication of well-aligned free-standing mesoporous carbon nanofiber arrays on silicon substrates. J Am Chem Soc 129:44 (2007), 13388–13389.
137. 2 via a high-temperature reductive sulfuration route. J Am Chem Soc 129:30 (2007), 9522–9531.
138. Yu, A.M., Meiser, F., Cassagneau, T., Caruso, F., Fabrication of polymer−nanoparticle composite inverse opals by a one-step electrochemical co-deposition process. Nano Lett 4:1 (2004), 177–181.
139. Murakami, H., Kobayashi, M., Takeuchi, H., Kawashima, Y., Preparation of poly(DL-lactide-co-glycolide) nanoparticles by modified spontaneous emulsification solvent diffusion method. Int J Pharm 187:2 (1999), 143–152.
140. Kim, T.W., Park, I.S., Ryoo, R., A synthetic route to ordered mesoporous carbon materials with graphitic pore walls. Angew Chem Int Ed 42:36 (2003), 4375–4379.
141. Berry, A.D., Tonucci, R.J., Fatemi, M., Fabrication of GaAs and InAs wires in nanochannel glass. Appl Phys Lett 69:19 (1996), 2846–2848.
142. Jiang, P., Bertone, J.F., Colvin, V.L., A lost-wax approach to monodisperse colloids and their crystals. Science 291 (2001), 453–457.
143. Chakarvarti, S.K., Vetter, J., Template synthesis—a membrane based technology for generation of nano-/micro materials: a review. Radiat Meas 29:2 (1998), 149–159.
144. Smeu, M., Zahid, F., Ji, W., Guo, H., Jaidann, M., Abou-Rachid, H., Energetic molecules encapsulated inside carbon nanotubes and between graphene layers: DFT calculations. J Phys Chem C 115:22 (2011), 10985–10989.
145. 3@CNTs nanoenergetic materials with a Cu microbridge. Chem Eng J 211–212 (2012), 31–36.
146. Cai, H.Q., Tian, L., Huang, H., Li, J.S., Deng, J.G., Yang, G.C., The formation of energetic composites by embedding multi-nitro organic molecules in an ordered mesoporous carbon. Micropor Mesopor Mater 163 (2012), 110–114.
147. CaiI, H.Q., Tian, L., Huang, B., Yang, G.C., Guan, D.B., Huang, H., 1,1-Diamino-2,2-dintroethene (FOX-7) nanocrystals embedded in mesoporous carbon FDU-15. Micropor Mesopor Mater 170 (2013), 20–25.
148. Cai, H.Q., Yang, R.J., Yang, G.C., Huang, H., Nie, F.D., Host–guest energetic nanocomposites based on self-assembly of multi-nitro organic molecules in nanochannels of mesoporous materials. Nanotechnology, 22, 2011, 305602.
149. Majano, G., Mintova, S., Bein, T., Klapötke, T.M., Confined detection of high-energy-density materials. J Phys Chem C 111:18 (2007), 6694–6699.
150. Comet, M., Siegert, B., Pichot, V., Gibot, P., Spitzer, D., Preparation of explosive nanoparticles in a porous chromium(III) oxide matrix: a first attempt to control the reactivity of explosives. Nanotechnology, 19, 2008, 285716.
151. Spitzer, D., Comet, M., Baras, C., Pichot, V., Piazzon, N., Energetic nano-materials: opportunities for enhanced performances. J Phys Chem Solids 71:2 (2010), 100–108.
152. 2 whiskers. J Am Chem Soc 125:37 (2003), 11196–11197.
153. Wang, L., Yamauchi, Y., Block copolymer mediated synthesis of dendritic platinum nanoparticles. J Am Chem Soc 131:26 (2009), 9152–9153.
154. Kadam, Y., Ganguly, R., Kumbhakar, M., Aswal, V.K., Hassan, P.A., Bahadur, P., Time dependent sphere-to-rod growth of the pluronic micelles: investigating the role of core and corona solvation in determining the micellar growth rate. J Phys Chem B 113:51 (2009), 16296–16302.
155. Fu, H.B., Xiao, D.B., Yao, J.N., Yang, G.Q., Nanofibers of 1,3-diphenyl-2-pyrazoline induced by cetyltrimethylammonium bromide micelles. Angew Chem Int Ed 42:25 (2003), 2883–2886.
156. Cady, H.H., Larson, A.C., The crystal structure of 1,3,5-triamino-2,4,6-trinitrobenzene. Acta Crystallogr 18 (1965), 485–496.
157. Badgujar, D.M., Talawar, M.B., Asthana, S.N., Mahulikar, P.P., Advances in science and technology of modern energetic materials: an overview. J Hazard Mater 151:2–3 (2008), 289–305.
158. Huang, B., Cao, M.H., Wu, X.L., Nie, F.D., Huang, H., Hu, C.W., Twinned TATB nanobelts: synthesis, characterization, and formation mechanism. CrystEngComm 13 (2011), 6658–6664.
159. Huang, B., Cao, M.H., Cheng, B.B., Sun, J., Li, N., Nie, F.D., et al. Self-assembly of 2D nanosheets into 3D dendrites based on the organic small molecule ANPZ and their size-dependent thermal properties. Cryst Growth Des 12:7 (2012), 3418–3425.
160. Mandal, A.K., Thanigaivelan, U., Pandey, R.K., Asthana, S., Khomane, R.B., Kulkarni, B.D., Preparation of spherical particles of 1,1-diamino-2,2-dinitroethene (FOX-7) using a micellar nanoreactor. Org Process Res Dev 16:11 (2012), 1711–1716.
161. Hao, Y.F., Meng, G.W., Wang, Z.L., Ye, C.H., Zhang, L.D., Periodically twinned nanowires and polytypic nanobelts of ZnS: the role of mass diffusion in vapor-liquid-solid growth. Nano Lett 6:8 (2006), 1650–1655.
162. Li, Q., Gong, X.G., Wang, C.R., Wang, J., Ip, K., Hark, S., Size-dependent periodically twinned ZnSe nanowires. Adv Mater 16:16 (2004), 1436–1440.
163. Zhao, Y.S., Di, C.A., Yang, W.S., Yu, G., Liu, Y.Q., Yao, J.N., Photoluminescence and electroluminescence from tris(8-hydroxyquinoline)aluminum nanowires prepared by adsorbent-assisted physical vapor deposition. Adv Funct Mater 16:15 (2006), 1985–1991.
164. Frolov, Y.V., Pivkina, A.N., Zav'yalov, S.A., Preparation of nanosized particles of energetic substances. Dokl Phys Chem 383:1–3 (2002), 81–83.
165. Frolov, Y.V., Pivkina, A.N., Ulyanova, P.A., Zav'yalov, S.A., Synthesis of energy-rich nanomaterials. Combust Explo Shock Waves 38:6 (2002), 709–713.
166. Pivkina, A., Ulyanova, P., Frolov, Y., Zavyalov, S., Schoonman, J., Nanomaterials for heterogeneous combustion. Propellants Explos Pyrotech 29:1 (2004), 39–48.
167. Zhang, G.X., Weeks, B.L., Surface morphology of organic thin films at various vapor flux. Appl Surf Sci 256:8 (2010), 2363–2366.
168. Zhang, G.X., Weeks, B.L., Holtz, M., Application of dynamic scaling to the surface properties of organic thin films: energetic materials. Surf Sci 605:3–4 (2011), 463–467.
169. Yang, G.C., Hu, H.L., Zhou, Y., Hu, Y.J., Huang, H., Nie, F.D., et al. Synthesis of one-molecule-thick single-crystalline nanosheets of energetic material for high-sensitive force sensor. Sci Rep, 2, 2012, 698.
170. Windsor, E., Najarro, M., Bloom, A., Benner, B. Jr., Fletcher, R., Lareau, R., et al. Application of inkjet printing technology to produce test materials of 1,3,5-trinitro-1,3,5 triazcyclohexane for trace explosive analysis. Anal Chem 82:20 (2010), 8519–8524.
171. Primera-Pedrozo, O.M., Pacheco-LondoNo, L., Ruiz, O., Ramirez, M., Soto-Feliciano, Y.M., De La Torre-Quintana, L.F., et al. Characterization of thermal inkjet technology TNT deposits by fiber optic-grazing angle probe FTIR spectroscopy. Proceedings of SPIE—the international society for optical engineering, part II, August 5, 2005, 543–552.
172. Ihnen, A.C., Fuchs, B.E., Petrock, A., Samuels, P.J., Stepanov, V., Di Stasio, A.R., et al. Inkjet printing of nanocomposites high-explosive materials. Proceedings of the 14th international detonation symposium, Couer d'Alene Resort, Idaho, CA, April 11−16, 2010, 37–40.
173. Ihnen, A.C., Petrock, A.M., Chou, T., Samuels, P.J., Fuchs, B.E., Lee, W.Y., Crystal morphology variation in inkjet-printed organic materials. Appl Surf Sci 258:2 (2011), 827–833.
174. Ihnen, A.C., Petrock, A.M., Chou, T., Fuchs, B.E., Lee, W.Y., Organic nanocomposite structure tailored by controlling droplet coalescence during inkjet printing. ACS Appl Mater Interfaces 4:9 (2012), 4691–4699.
175. Wrable-Rose, M., Primera-Pedrozo, O.M., Pacheco-Londoňo, L.C., Hernandez-Rivera, S.P., Preparation of TNT, RDX and ammonium nitrate standards on gold-on-silicon surfaces by thermal inkjet technology. Sens Imaging 11:4 (2010), 147–169.
176. Son, J.S., Park, K., Han, M.K., Kang, C., Park, S.G., Kim, J.H., et al. Large-scale synthesis and characterization of the size-dependent thermoelectric properties of uniformly sized bismuth nanocrystals. Angew Chem Int Ed 50:6 (2011), 1363–1366.
177. Norberg, N.S., Arthur, T.S., Fredrick, S.J., Prieto, A.L., Size-dependent hydrogen storage properties of Mg nanocrystals prepared from solution. J Am Chem Soc 133:28 (2011), 10679–10681.
178. Boddu, V.M., Viswanath, D.S., Ghosh, T.K., Damavarapu, R., 2,4,6-Triamino-1,3,5-trinitrobenzene (TATB) and TATB-based formulations—a review. J Hazard Mater 181:1–3 (2010), 1–8.
179. Fathollahi, M., Pourmortazavi, S.M., Hosseini, S.G., Particle size effects on thermal decomposition of energetic material. J Energ Mater 26:1 (2007), 52–69.
180. Sovizi, M.R., Hajimirsadeghi, S.S., Naderizadeh, B., Effect of particle size on thermal decomposition of nitrocellulose. J Hazard Mater 168:2–3 (2009), 1134–1139.
181. Prodan, E.A., Localization phenomena of topochemical reactions. J Therm Anal 29:5 (1984), 941–948.
182. Fathollahi, M., Mohammadi, B., Mohammadi, J., Kinetic investigation on thermal decomposition of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) nanoparticles. Fuel 104 (2013), 95–100.
183. Gromov, A., Strokova, Y., Kabardin, A., Vorozhtsov, A., Teipel, U., Experimental study of the effect of metal nanopowders on the decomposition of HMX, AP and AN. Propellants Explos Pyrotech 34:6 (2009), 506–512.
184. Dubey, R., Srivastava, P., Kapoor, I.P.S., Singh, G., Synthesis, characterization and catalytic behavior of Cu nanoparticles on the thermal decomposition of AP, HMX, NTO and composite solid propellants, Part-83. Thermochim Acta 549 (2012), 102–109.
185. 3 for HMX thermal decomposition. Propellants Explos Pyrotech 34:5 (2009), 394–399.
186. 3 for HMX thermal decomposition. J Hazard Mater 165:1–3 (2009), 1056–1061.
187. 3 on RDX thermal decomposition. J Hazard Mater 177:1–3 (2010), 554–559.
188. 3 and LaOCl powder mixture on HMX thermal decomposition. Thermochim Acta 499:1–2 (2010), 111–116.
189. 4 nanoparticles on graphene as a promising catalyst for the thermal decomposition of ammonium perchlorate. Carbon 54 (2013), 124–132.
190. Roßmann, C., Heintz, T., Herrmann, M., Production of ultrafine explosive particles by bead milling technology. 43rd international annual conference of the Fraunhofer ICT, Karlsruhe, Federal Republic of Germany, June 23–29, 2012 p. 93/1–12.
191. Armstrong, R.W., Ammon, H.L., Elban, W.L., Investigation of hot spot characteristics in energetic crystals. Thermochim Acta 384:1–2 (2002), 303–313.
192. Setchell, R.E., Grain-size effects on the shock sensitivity of hexanitrostilbene (HNS) explosive. Combust Flame 56:3 (1984), 343–345.
193. Spear, R.J., Nanut, V., Reversal of particle size/shock sensitivity relationship at small particle size for pressed heterogeneous explosives under sustained shock loading. J Energ Mater 7:1–2 (1989), 77–114.
194. Mader, C.L., Kershner, J.D., Numerical modeling of the effect of temperature and particle size on shock initiation properties of HMX and TATB. J Energ Mater 10:2–3 (1992), 69–95.
195. Lee, R., Bloom, G., Von Holle, W., Weingart, W., Erickson, L., Sanders, S., et al. The relationship between the shock sensitivity and the solid pore sizes of TATB powders pressed to various densities. Proceedings of the 8th symposium (international) on detonation, Albuquerque, new Mexico, CA, July 15–19, 1985, 3–14.
196. Gifford, M.J., Chakravarty, A., Greenaway, M., Watson, S., Proud, W., Field, J., Unconventional properties of ultrafine energetic materials. 32nd international annual conference of ICT, Karlsruhe, Federal Republic of Germany, July 3–6, 2001 p. 100/1–14.
197. Khasainov, B.A., Borisov, A.A., Ermolaev, B.S., Korotkov, A.I., Two-phase visco-plastic model of shock initiation of detonation in high density pressed explosives. Proceedings of the 7th symposium (international) on detonation, Annapolis, Maryland, CA, June 16–19, 1981, 435–447.
198. Honodel, C.A., Humphrey, J.R., Weingart, R.C., Shock initiation of TATB formulations. Proceedings of the 7th symposium (international) on detonation, Annapolis, Maryland, CA, June 16–19, 1981, 425–434.
199. Muravyev, N., Frolov, Y., Pivkina, A., Ivanov, D., Meerov, D., Monogarov, K., Ballistic properties of energetic condensed systems with nanosized high-energy materials. Abstracts IV international workshop HEMs, Biysk, Russia, September 3–9, 2008.
200. Tarver, C.M., Modeling detonation experiments on triaminotrinitrobenzene (TATB)-based explosives LX17, PBX 9502, and ultrafine TATB. J Energ Mater 30:3 (2012), 220–251.
201. Muravyev, N., Frolov, Y., Pivkina, A., Monogarov, K., Ordzhonikidze, O., Bushmarinov, I., et al. Influence of particle size and mixing technology on combustion of HMX/Al compositions. Propellants Explos Pyrotech 35:3 (2010), 226–232.
202. Gogulya, M.F., Mackhov, M.N., Dolgoborodov, A.Y., Brazhnikov, M.A., Leipunsky, I.O., Jigatch, A.N., et al. Nanocomposites based on HMX and aluminium: synthesis and detonation properties. Proceedings of international conference “VII Khariton topical scientific readings”, Sarov, Russia, March 11–18, 2005.
203. Lowe, C.A., Longbottom, A.W., Effect of particle distribution on the compaction behavior of granular beds. Phys Fluids, 18, 2006, 066101.
204. Lowe, C.A., Greenaway, M.W., Compaction processes in granular beds composed of different particle sizes. J Appl Phys, 98, 2005, 123519.
205. Nafday, O.A., Pitchimani, R., Weeks, B.L., Patterning high explosives at the nanoscale. Propellants Explos Pyrotech 31:5 (2006), 376–381.
206. Zhang, X., Zhang, G.X., Liao, Y.C., Weeks, B.L., Zhang, Z., Embossing of organic thin films using a surfactant assisted lift-off technique. J Colloid Interface Sci 387:1 (2012), 175–179.
207. Roberts, C.W., Hira, S.M., Mason, B.P., Strouse, G.F., Stoltz, C.A., Controlling RDX explosive crystallite morphology and inclusion content via simple ultrasonic agitation and solvent evaporation. CrystEngComm 13 (2011), 1074–1076.
208. Akkbarzadea, H., Parsafar, G.A., Bayat, Y., Structural stability of nano-sized crystals of HMX: a molecular dynamics simulation study. Appl Surf Sci 258:7 (2012), 2226–2230.
209. Chen, Y., Xin, F., Qiao, Z.Q., Zeng, G.Y., Influence of the storage conditions on the specific surface area of nano-TATB. 42nd international annual conference of the Fraunhofer ICT, Karlsruhe, Federal Republic of Germany, June 28–July 1, 2011 p. 42/1–8.
210. Rossi, C., Zhang, K.L., Estève, D., Alphonse, P., Tailhades, P., Vahlas, C., Nanoenergetic materials for MEMS: a review. J Microelectromech Syst 16:4 (2007), 919–931.
211. Pezous, H., Rossi, C., Sanchez, M., Mathieu, F., Dollat, X., Charlot, S., et al. Integration of a MEMS based safe arm and fire device. Sens Actuators A 159:2 (2010), 157–167.
212. Pezous, H., Rossi, C., Sanchez, M., Mathieu, F., Dollat, X., Charlot, S., et al. Fabrication, assembly and tests of a MEMS-based safe, arm and fire device. J Phys Chem Solids 71:2 (2010), 75–79.
213. Pennarun, P., Rossi, C., Estève, D., Colin, R.D., Single use, robust, MEMS based electro-thermal microswitches for redundancy and system reconfiguration. Sens Actuators A 136:1 (2007), 273–281.
214. Rossi, C., Briand, D., Dumonteuil, M., Camps, T., Pham, P.Q., de Rooij, N.F., Matrix of 10 × 10 addressed solid propellant microthrusters: review of the technologies. Sens Actuators A 126:1 (2006), 241–252.