Performance evaluation of coated carbide tool in machining of stainless steel (AISI 202) under minimum quantity lubrication (MQL)

International Journal of Precision Engineering and Manufacturing - Green Technology

Volumn 2, Issue 2, 2015, Pages 123-129

  Dureja, J S ^a   Singh, Ranjit ^a   Singh, Talwinder ^a   Singh, Pargat ^a   Dogra, Manu ^b   Bhatti, Manpreet S ^c  

^a PUNJABI UNIVERSITY   (India)

^b Department of Mechanical Engineering SS Giri Punjab University Regional Centre   (India)

^c GURU NANAK DEV UNIVERSITY   (India)

Author keywords

Coated carbide cutting tool; Flank wear (VB); Green machining; Minimum quantity lubrication (MQL); Surface roughness (Ra)

Indexed keywords

AUSTENITIC STAINLESS STEEL; CARBIDE CUTTING TOOLS; CARBIDE TOOLS; CUTTING; CUTTING FLUIDS; CUTTING TOOLS; ENVIRONMENTAL REGULATIONS; HEALTH HAZARDS; LUBRICATION; SIGNAL TO NOISE RATIO; TURNING;

FLANK WEAR; GREEN MACHINING; MACHINED SURFACE ROUGHNESS; MINIMAL QUANTITIES OF LUBRICANTS; MINIMUM QUANTITY LUBRICATION; MULTIPLE RESPONSE OPTIMIZATION; SIGNAL TO NOISE (S/N) RATIOS; SURFACE ROUGHNESS (RA);

SURFACE ROUGHNESS;

EID: 84928487183     PISSN: 22886206     EISSN: 21980810     Source Type: Journal    
DOI: 10.1007/s40684-015-0016-9     Document Type: Article

References (20)

1. Adler, D., Hii, W.-S., Michalek, D., and Sutherland, J., "Examining the Role of Cutting Fluids in Machining and Efforts to Address Associated Environmental/Health Concerns," Machining Science and Technology, Vol. 10, No. 1, pp. 23-58, 2006.
2. Davim, J. P., Sreejith, P., and Silva, J., "Turning of Brasses using Minimum Quantity of Lubricant (MQL) and Flooded Lubricant Conditions," Materials and Manufacturing Processes, Vol. 22, No. 1, pp. 45-50, 2007.
3. Thakur, D. G., Ramamoorthy, B., and Vijayaraghavan, L., "Investigation and Optimization of Lubrication Parameters in High Speed Turning of Superalloy Inconel 718," International Journal of Advanced Manufacturing Technology, Vol. 50, No. 5-8, pp. 471-478, 2010.
4. Wang, C.-D., Chen, M., An, Q.-L., Wang, M., and Zhu, Y.-H., "Tool Wear Performance in Face Milling Inconel 182 using Minimum Quantity Lubrication with Different Nozzle Positions," Int. J. Precis. Eng. Manuf., Vol. 15, No. 3, pp. 557-565, 2014.
5. Klocke, F. and Eisenblätter, G., "Dry Cutting," CIRP Annals-Manufacturing Technology, Vol. 46, No. 2, pp. 519-526, 1997.
6. Nguyen, T. K., Do, I., and Kwon, P., "A Tribological Study of Vegetable Oil Enhanced by Nano-Platelets and Implication in MQL Machining," Int. J. Precis. Eng. Manuf., Vol. 13, No. 7, pp. 1077-1083, 2012.
7. Bruni, C., Forcellese, A., Gabrielli, F., and Simoncini, M., "Effect of the Lubrication-Cooling Technique, Insert Technology and Machine Bed Material on the Workpart Surface Finish and Tool Wear in Finish Turning of AISI 420B," International Journal of Machine Tools and Manufacture, Vol. 46, No. 12, pp. 1547-1554, 2006.
8. Khan, M. and Dhar, N., "Performance Evaluation of Minimum Quantity Lubrication by Vegetable Oil in Terms of Cutting Force, Cutting Zone Temperature, Tool Wear, Job Dimension and Surface Finish in Turning AISI-1060 Steel," Journal of Zhejiang University SCIENCE A, Vol. 7, No. 11, pp. 1790-1799, 2006.
9. Dhar, N., Islam, M., Islam, S., and Mithu, M., "The Influence of Minimum Quantity of Lubrication (MQL) on Cutting Temperature, Chip and Dimensional Accuracy in Turning AISI-1040 Steel," Journal of Materials Processing Technology, Vol. 171, No. 1, pp. 93-99, 2006.
10. Dhar, N., Kamruzzaman, M., and Ahmed, M., "Effect of Minimum Quantity Lubrication (MQL) on Tool Wear and Surface Roughness in Turning AISI-4340 Steel," Journal of Materials Processing Technology, Vol. 172, No. 2, pp. 299-304, 2006.
11. Sreejith, P., "Machining of 6061 Aluminium Alloy with MQL, Dry and Flooded Lubricant Conditions," Materials Letters, Vol. 62, No. 2, pp. 276-278, 2008.
12. Frəţilə, D. and Caizar, C., "Investigation of the Influence of Process Parameters and Cooling Method on the Surface Quality of AISI-1045 during Turning," Materials and Manufacturing Processes, Vol. 27, No. 10, pp. 1123-1128, 2012.
13. Gaitonde, V., Karnik, S., and Davim, J. P., "Optimal MQL and Cutting Conditions Determination for Desired Surface Roughness in Turning of Brass using Genetic Algorithms," Machining Science and Technology, Vol. 16, No. 2, pp. 304-320, 2012.
14. Liu, Z., Xu, J., Han, S., and Chen, M., "A Coupling Method of Response Surfaces (CRSM) for Cutting Parameters Optimization in Machining Titanium Alloy under Minimum Quantity Lubrication (MQL) Condition," Int. J. Precis. Eng. Manuf., Vol. 14, No. 5, pp. 693-702, 2013.
15. Thakur, D. G., Ramamoorthy, B., and Vijayaraghavan, L., "Effect of Cutting Parameters on the Degree of Work Hardening and Tool Life during High-Speed Machining of Inconel 718," International Journal of Advanced Manufacturing Technology, Vol. 59, No. 5-8, pp. 483-489, 2012.
16. Arunachalam, R., Mannan, M., and Spowage, A., "Surface Integrity When Machining Age Hardened Inconel 718 with Coated Carbide Cutting Tools," International Journal of Machine Tools and Manufacture, Vol. 44, No. 14, pp. 1481-1491, 2004.
17. Leppert, T., "Surface Layer Properties of AISI 316l Steel When Turning under Dry and with Minimum Quantity Lubrication Conditions," Proc. of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 226, No. 4, pp. 617-631, 2012.
18. Krishnaiah, K. and Shahabudeen, P., "Applied Design of Experiments and Taguchi Methods," PHI Learning Private Limited, 2012.
19. Senthilkumaar, J., Selvarani, P., and Arunachalam, R., "Selection of Machining Parameters based on the Analysis of Surface Roughness and Flank Wear in Finish Turning and Facing of Inconel 718 using Taguchi Technique," Emirates Journal for Engineering Research, Vol. 15, No. 2, pp. 7-14, 2010.
20. Dureja, J., Singh, R., and Bhatti, M. S., "Optimizing Flank Wear and Surface Roughness during Hard Turning of AISI D3 Steel by Taguchi and RSM Methods," Production & Manufacturing Research, Vol. 2, No. 1, pp. 767-783, 2014.