Optimal mql and cutting conditions determination for desired surface roughness in turning of brass using genetic algorithms

Machining Science and Technology

Volumn 16, Issue 2, 2012, Pages 304-320

  Gaitonde, V N ^a   Karnik, S R ^a   Davim, J Paulo ^b  

^a KLE TECHNOLOGICAL UNIVERSITY   (India)

^b UNIVERSITY OF AVEIRO   (Portugal)

Author keywords

brass; genetic algorithms; Minimum Quantity of Lubricant (MQL); Response Surface Methodology (RSM); surface roughness; turning

Indexed keywords

CEMENTED CARBIDE TOOLS; CUTTING CONDITIONS; CUTTING SPEED; FEED-RATES; INTERACTION EFFECT; MACHINING PARAMETERS; MACHINING PERFORMANCE; MINIMUM QUANTITY OF LUBRICANT (MQL); MINIMUM QUANTITY OF LUBRICATIONS; MINIMUM VALUE; OPTIMAL MACHINING PARAMETERS; ORTHOGONAL ARRAY; PARAMETRIC ANALYSIS; PROCESS PARAMETERS; RESPONSE SURFACE METHODOLOGY; SECOND ORDERS; SURFACE ROUGHNESS MODEL; TAGUCHI;

BRASS; MACHINING CENTERS; OPTIMIZATION; SURFACE PROPERTIES; SURFACE ROUGHNESS; TURNING;

GENETIC ALGORITHMS;

EID: 84861941606     PISSN: 10910344     EISSN: 15322483     Source Type: Journal    
DOI: 10.1080/10910344.2012.673976     Document Type: Article

References (29)

1. Braga, D.U.; Diniz, A.E.; Miranda, G.W.A.; Coppini, N.L. (2002) Using a minimum quantity of lubricant (MQL) and a diamond coated tool in the drilling of aluminum-silicon alloys. Journal of Materials Processing Technology, 122: 127-138. (Pubitemid 34201305)
2. Cantero, J.L.; Tardio, M.M.; Canteli, J.A.; Marcos, M.; Miguelez, M.H. (2005) Dry drilling of alloy Ti-6Al-4V. International Journal of Machine Tools and Manufacture, 45: 1246-1255. (Pubitemid 40643799)
3. Davim, J.P.; Sreejith, P.S.; Gomes, R.; Peixoto, C. (2006) Experimental studies on drilling of aluminium (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions. Proceedings of I Mech E, Part B, Journal of Engineering Manufacture, 220: 1605-1611.
4. Davim, J.P.; Sreejith, P.S.; Silva, J. (2007) Turning of brasses using minimum quantity of lubricant (MQL) and flooded-lubricant conditions. Materials and Manufacturing Processes, 22: 45-50. (Pubitemid 46013768)
5. Dhar, N.R.; Islam, M.W.; Islam, S.; Mithu, M.A.H. (2006a) The influence of minimum quantity of lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel. Journal of Materials Processing Technology, 171: 93-99. (Pubitemid 41815164)
6. Dhar, N.R.; Kamruzzaman, M.; Ahmed, M. (2006b) Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel. Journal of Materials Processing Technology, 172: 299-304. (Pubitemid 43227341)
7. Dhar, N.R.; Ahmed, M.T.; Islam, S. (2007) An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steel. International Journal of Machine Tools and Manufacture, 47: 748-753. (Pubitemid 46162105)
8. Diniz, A.E.; Ferreira, J.R.; Filho, F.T. (2003) Influence of refrigeration=lubrication condition on SAE 52100 hardened steel turning at several cutting speeds. International Journal of Machine ools and Manufacture, 43: 317-326.
9. Gaitonde, V.N.; Karnik, S.R.; Davim, J.P. (2008) Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass. Journal of Materials Processing Technology, 204(1-3): 459-464.
10. Goldberg, D.E. (1989) Genetic Algorithms in Search Optimization and Machine Learning, Addison Wesley Publishing Company Inc, New York.
11. Hanyu, H.; Kamiya, S.; Murakami, Y.; Saka, M. (2003) Dry and semi-dry machining using finely crystallized diamond coating cutting tools. Surface Coating Technology, 173-174: 992-995. (Pubitemid 37054343)
12. Heinemann, R.; Hinduja, S.; Barrow, G.; Petuelli, G. (2006) Effect of MQL on the tool life of small twist drills in deep-hole drilling. International Journal of Machine Tools and Manufacture, 46: 1-6. (Pubitemid 41497894)
13. Itoigawa, F.; Childs, T.H.C.; Nakamura, T.; Belluco,W. (2006) Effects andmechanisms inminimal quantity lubrication machining of an aluminum alloy. Wear, 260(3): 339-344. (Pubitemid 43208701)
14. Kamata, Y.; Obikawa, T. (2007) High speed MQL finish-turning of Inconel 718 with different coated tools. Journal of Materials Processing Technology, 192-193: 281-286. (Pubitemid 47187991)
15. Kelly, J.F.; Cotterell, M.G. (2002) Minimal lubrication machining of aluminium alloys. Journal of Materials Processing Technology, 120: 327-334. (Pubitemid 34069993)
16. Kishawy, H.A.; Dumitrescu, M.; Ng, E.-G.; Elbestawi, M.A. (2005) Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminium alloy. International Journal of Machine Tools and Manufacture, 45: 219-227.
17. Lopez de Lacalle, L.N.; Angulo, C.; Lamikiz, A.; Sanchez J.A. (2006) Experimental and numerical investigation of the effect of spray cutting fluids in high speed milling. Journal of Materials Processing Technology, 172: 11-15. (Pubitemid 43144589)
18. Lugscheider, E.; Knotek, O.; Barimani, C.; Leyendecker, T.; Lemmer, O.; Wenke, R. (1997) Investigations on hard coated reamers in different lubricant free cutting operations. Surface Coating Technology, 90: 172-177.
19. Math Works Incorporation (2005) MATLAB User Manual, Version 7.1, R 14. Math Works Incorporation, Natick, MA.
20. Minitab Inc. (2006) MINITAB User Manual, Version 13, Minitab, State College, PA.
21. Montgomery, D.C. (2003) Design and Analysis of Experiments, John Wiley and Sons, New York.
22. Phadke, M.S. (1989) Quality Engineering using Robust Design. Prentice Hall, Englewood Cliffs, New Jersey.
23. Rahman, M.; Kumar, A.S.; Manzoor-Ul-Salam (2001) Evaluation of minimal quantities of lubricant in end milling. International Journal of Advanced Manufacturing Technology, 18: 235-241. (Pubitemid 32914694)
24. Roberto da Silva, L.; Bianchi, E.C.; Fusse, R.Y.; Catai, R.E.; França, T.V.; Aguiar, P.R. (2007) Analysis of surface integrity for minimum quantity lubricant-MQL in grinding. International Journal of Machine Tools and Manufacture, 47: 412-418. (Pubitemid 44767979)
25. Ross, P.J. (1996) Taguchi Techniques for Quality Engineering, McGraw-Hill, New York.
26. Sokovic, M.; Mijanovic, K. (2001) Ecological aspects of the cutting fluids and its influence on quantifiable parameters of the cutting processes. Journal of Materials Processing Technology, 109: 181-189. (Pubitemid 32092555)
27. Sreejith, P.S.; Ngoi, B.K.A. (2000) Dry machining-machining of the future. Journal of Materials Processing Technology, 101: 289-293.
28. Sun, J.; Wong, Y.S.; Rahman, M.; Wang, Z. G.; Neo, K.S.; Tan, C. H.; Onozuka, H. (2006) Effects of coolant supply methods and cutting conditions on tool life in end milling titanium alloy. Machining Science and Technology, 10(3): 355-370. (Pubitemid 44505557)
29. Zeilmann, R.P.; Weingaertner, W.L. (2006) Analysis of temperature during drilling of Ti6Al4V with minimal quantity of lubricant. Journal of Materials Processing Technology, 179: 124-127. (Pubitemid 44376525)